Used Scm Integra System for sale (38,416)

Condition: used, Year of construction: 2012, Integrated NC machining center for windows and doors composed of: A) Automatic loader mod. "SP" Automatic loader for Base SP N. 1 moulder -Automatic loader consisting of: -Table with motorized belts -Automatic device for moving pieces from the buffer to the loading surface of the moulder * Piece length min: 450 mm max: 3200 mm * Piece width min: 40 mm max: 230 mm * Piece thickness min: 40 mm max: 120 mm * Work cycles 10/min * Chain advancement speed on the table: 7 m/min * Loading table dimensions 2800 x 2150 mm B) Automatic moulder mod. SUPERSET NT C 6 Position 1 = Planer Shaft Position 2= 1st right vertical shaft Position 3= 1st left vertical shaft Position 4= 1st upper horizontal shaft Position 5= 1st lower horizontal shaft Position 6= Group for slat recovery 2500 mm entry level Gijdpfx Asixxwmslbou Speed 6-36 m/min via inverter No. 1 - engine power 5.5 hp (4 kw) Horizontal presser before the planer with pneumatic exclusion from the panel Pneumatic exclusion from the control panel for the feed unit located before the planer shaft Tandem advance group in front of the right vertical with rapid exclusion Advance groups after the upper ones for reducing the towing distance from 620 mm to 450 mm Input guide with bearings for automatic feeders Electrical predisposition for the use of automatic loaders Manual centralized lubrication Pump for lubrication of the work surface with automatic drive Setup for in-line integration with INTEGRA SYSTEM - work surface raised to 970 mm - traffic light at entrance - piece counting Independent electrical panel POS. 1 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) T-SET quick tool locking -allows tool locking/unlocking with the simple use of a compressed air gun POS. 2 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic vertical positioning POS. 3 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) High precision shaft Vertical shaft with a useful length of 180 mm T-SET quick tool locking Electronic horizontal positioning POS. 4 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking Electronic vertical positioning POS. 5 High precision shaft 10 hp (7.5 kw) engine instead of 5.5 hp (4 kw) Brake for engines from 5.5 hp (4 kw) to 10 hp (7.5 kw) Rotation speed 8300 rpm T-SET quick tool locking POS. 6 Glass bead recovery group Comprehends: PRL allows the automatic transition from planing to function recovery of the glazing bead and vice versa. - operating group with shaft diameter 30 mm, length 30 mm - electronic horizontal positioning - electronic vertical positioning - hardware and PLC modifications for axis management - tandem exit and modified hood second advancing group after the universal C) Connection transfer Transfer for receiving pieces from the moulder and automatic insertion into the Sott

Condition: like new (used), Year of construction: 2021, operating hours: 30 h, functionality: fully functional, machine/vehicle number: AE00002612, grinding width: 1,350 mm, overall weight: 6,250 kg, grinding height: 170 mm, working height: 170 mm, table height: 900 mm, workpiece height (max.): 170 mm, The machine has only been in use for a few hours and is practically brand new. It is in perfect working order. See below for the full specifications: DMC system T5C 1350 PF170-4M Lifting unit for a fixed work table, 900 mm from the ground * Working thickness: 3 to 170 mm BL 16 Infeed panel with reading bar for 'epics' sectioned pads, pitch 16 mm, or with PWM3 POSITION 01 TIE-5000 Working unit for an extractable internal cross pad PE 16T 'EPICS' sectioned electronic sanding pad, pitch 16 mm Working pressure control of the sectioned pad via the Pro-Sand control system Motor driven by an inverter, power up to 15 kW POSITION 02 DO 19 Oscillating unit fitted with 19 rotating 125 mm disc brushes 1.1 kW main motor driven by an inverter Independent motor for controlling the oscillating movement Electronic auto-set for the unit Sliding movement with motor driven by an inverter POSITION 03 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 04 BF 300 Working unit for a brush roller, diameter 300 mm 4 kW main motor driven by an inverter Double rotating direction of the brushing roller Electronic auto-set for the brush roller Side oscillation of the brush roller POSITION 05 SC-2620 Operating unit for a superfinishing pad Sanding belt rotation against the conveyor feed direction Electronic sanding belt swing control Disc brake ◦ Chevron belt dimensions: 1370 x 2186 mm ◦ Sanding belt dimensions: 1370 x 2620 mm PE 16/C 'EPICS' sectioned electronic sanding pad, pitch 16 mm 16 mm center-to-center distance of sectors Double-action pneumatic cylinders with adjustable push/counter-push Graphite cloth with quick extraction device Total management of its functionality by the "Pro-Sand" electronic control Working pressure management of sectioned pad via the Pro-Sand control system Timed oscillating clearing blowers 15 kW motor driven by an inverter OUTSIDE THE MACHINE SB/U 200 Outfeed working unit for abrasive cloth-coated rollers, diameter 200 mm Roller rotation against the conveyor feed direction / Manual adjustment of the roller working position / Abrasive cloth-coated roller, diameter 200 mm, 'Ultra Fine' type with silicon carbide fibers / 2.2 kW motor / Side oscillation of the brush roller OTHER DEVICES Perforated worktop and conveyor belt with a vacuum motor powered by an inverter up to 7.5 kW, integrated into the machine frame Front supporting worktop equipped with five idler rollers Rear supporting worktop equipped with five idler rollers 4 kW feed belt motor driven by an inverter Console with integrated PC "eye-M" and "Maestro Pro-Sand" electronic control with Tele Service system 1999 working programs / Virtual keyboard for fast settings of the machine / Production report / Interactive trouble-shooting program and self-diagnosis of the electronic cards / Display of electric and pneumatic diagrams / Display of the user manual, spare parts catalog, electric and pneumatic diagrams Gisdpfx Aozcmcvolbou Vision panel door positioned on the service side Internal LED lighting for the machine

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm Godpfx Aod Supgolbsiu motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: ready for operation (used), Year of construction: 2021, This SCM DMC SYSTEM belt sander was manufactured in 2021. It features a working width of 1,350 mm and belt feed speeds ranging from 2 to 16 m/min. Equipped with PRO SAND electronic control and a PLC terminal with a 10.4" LCD color display, it offers advanced user interface capabilities. The machine includes multiple working units for diverse sanding tasks and is powered by inverters for precise speed control. Contact us for more information about this machine. Additional equipment • Vacuum Motor: Powered by inverter up to 7.5 kW integrated into machine frame / Conveyor: Rubber-coated belt conveyor 50 Shore / Feed Belt Motor: 4 kW driven by inverter / Console: Integrated with PC eye-M and Maestro Pro Sand electronic control, Tele Service system, 21.5" LED LCD color display • Programs: 1999 Working Programs / Control System: Interactive troubleshooting, self-diagnosis, Full HD display with multi-touchscreen, Maestro Pro Sand software • Operating Temperature: +5 to 35°C/ Additional Features: Virtual keyboard, production report, display of electric and pneumatic diagrams, user manual. Machine Benefits Technical Machine Benefits • Working width: 1350 mm / belt feed speed: 2 to 16 m/min / control: pro sand electronic control / display: plc terminal with 10. 4" lcd color display • Sanding belt dimensions: 150 x 5000 mm / chevron belt dimensions: 140 x 4710 mm; 1370 x 2186 mm • Aggregate 1: tie 5000 working unit for extra table internal cross pad / automatic brake, linear blower, sanding belt cleaning system / aggregate 2: do19 orbiting unit for 19 rotating disc brushes / main motor: 1. 1 kw / rotating disc diameter: 125 mm / aggregate 3 & 4: bf300 working unit for brush roller / brush roller diameter: 300 mm / motor: 4 kw / aggregate 5: sc 2620 operating unit for super-finishing pad / chevron belt dimensions: 1370 x 2186 mm / sanding belt dimensions: 1370 x 2620 mm Godeyaqg Topfx Albjiu

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: AA1/018167, functionality: fully functional, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,400 mm, workpiece height (max.): 180 mm, number of axes: 5, number of slots in tool magazine: 26, TECHNICAL DETAILS Gisdpfx Aozarfdslbju Workpiece length (max.): 3,300 mm Workpiece width (max.): 1,400 mm Workpiece height (max.): 180 mm Number of axes: 5 Number of tool slots in the tool magazine: 26 MACHINE DETAILS Control system & software: Maestro Version 1.00.022.1034 Input voltage: 400 V Input current: 59 A Dimensions (L x W x H): 6,000 x 3,500 x 3,500 mm EQUIPMENT Documentation/Manual Includes Clemex system Additional licenses: 1 3D dongle, 2 2D dongles Tool package with approx. 20 milling cutters (including DIA milling cutters, indexable insert milling cutters, roughing milling cutters, T-slot milling cutters, and rounding milling cutters) Palette CAD Two licenses for Palette CAD Vacuum pump: Type Q2EFA132M6C-34

Condition: good (used), Year of construction: 2000, Multiblade tracked SCM M3 4 - Italian production - year of production 2000 - DTR TECHNICAL SPECIFICATIONS: track width 300 mm cutting height 120 mm engine power 25 kW max. blade diameter 350 mm max. workpiece width 1000 mm min. workpiece length 400 mm adjustable feed on the inverter pneumatically adjustable ruler on the right Gjdpfx Aljg Tdfdebjiu revolver ruler setting of 6 types three rows of anti-recoil pawls possibility of putting on a board - a shoe spindle diameter 50 mm sleeve diameter 70 mm sleeve equipped with spacers automatic central lubrication four upper pressure shafts spigot diameter 180 mm and 120 mm dimensions of the machine (length / width / height) 210/175/160 cm weight 1800 kg

Condition: excellent (used), Catalogue number 7878 TECHNICAL DATA - track width: 220 mm - shaft width: 200 mm - max saw blade diameter: 350 mm - saw blade bore diameter: 70 mm - max cutting height: 120 mm - table width with clearance: 1100 mm - table length: 1640 mm - from above: - row of pawls/kickers - 1 metal pressure feed roller - pawls - metal pressure feed roller - shaft with saws - 2 metal pressure feed rollers - from below: - guide - pawls/kickers Gijdpjzcmpisfx Albeu - track - stepless feed speed adjustment with inverter - feed motor: 1.1 kW - main motor: 29 kW - central lubrication of the track - extraction port diameter: 180 mm - overall dimensions (LxWxH): 2000x1600x1500 mm - weight: 1480 kg ADVANTAGES – Italian manufacture – used multi-blade saw – very good condition Net price: 27,900 PLN Net price: 6,643 EUR based on 4.20 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: like new (used), For industrial use, tumbler loading systems are commonly utilized across various industries such as the food industry (especially bakery and meat processing), pharmaceutical industry, chemical industry, and others where precise mixing, rotation, or material processing is required. These machines offer high capacity, accuracy, and safety within automated production lines. High Capacity Adjustability Gjdpszbk R Iefx Albjiu Automatic Loading and Unloading Systems Temperature and Humidity Control Drive System Materials and Construction Safety Systems Integration with Automated Systems Adaptability and Flexibility Energy Efficiency

Condition: excellent (used), CATALOG NUMBER 7479 Technical data: - shaft width: 410 mm Gedpszcdh Aefx Albsiu - 4-knife shaft (TERSA) - noise reduction comb - shaft guard - table length: 2610 mm - longer infeed table: 1435 mm - cast iron tables - both tables adjustable - original cast iron tiltable fence - brake - extraction port diameter: 115 mm - motor: 4 kW - dimensions (LxWxH): 2610x960x1110 mm - weight: 578 kg ADVANTAGES – Made in Italy – 4-knife shaft – brake – noise reduction comb – longer infeed table – unpainted – used surface planer, in very good condition, original DTR documentation Net price: 21,900 PLN Net price: 5,200 EUR (exchange rate 4.2 EUR) (Prices may change depending on significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7987 TECHNICAL DATA - Roller width: 500 mm - Number of knives: 4 pcs - Max. thickness of workpiece: 230 mm – From above: - Anti-kickback fingers - Toothed, feed-in roller; pulling, swiveling - Pressure bar - Planing shaft - Pressure bar - Smooth, feed-out roller; pulling - Motor: 4 kW - Electrically adjustable table height Gsdpfx Aszcc U Ijlbsiu - 2 feed speeds: 8/12.5 m/min - Dimensions (L/W/H): 1000x1000x1050 mm - Weight: 620 kg ADVANTAGES – Made in Italy – Used thickness planer, in very good condition Net price: 14,900 PLN Net price: 3,550 EUR based on rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry - Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds: 2500/3000/4200 rpm Mitre fence with length compensation Saw blade up to Ø 550 mm Electric height adjustment and tilting of saw blade with digital displays Machine from retirement / first delivered in 2011 Machine is WORKSHOP TESTED and in EXCELLENT CONDITION Giedpfx Aljzb Ig Hobeu Available from stock Lieboch

Condition: used, SCM Sandya 600 RCS 110 Wide-Belt Calibrating and Fine Sanding Machine The advanced sanding center for calibration, solid wood sanding, and fine veneer sanding TOP Equipment 1. Calibration sanding unit with RA diagonally ribbed steel contact roller 2. Combination sanding unit with 140 mm diameter contact roller, 85 Shore hardness, elastic segmented sanding shoe with electronically controlled sectors Working width 1100 mm Giedpfxjzb Dvws Albsu Main motor power 15 kW Design "B" for RCS MESAR elastic segmented sanding shoe electronic programming unit "LOGIC SC screen control" electronic adjustment of working height with automatic workpiece detection Roller table in infeed and outfeed for long workpieces Machine from small craft business / LEASE RETURN First delivery 2017 ex stock Lieboch / LEASING OPTION

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, edge thickness (max.): 25 mm, height adjustment type: pneumatic, actuation type: electric, total height: 1,950 mm, total length: 8,000 mm, total width: 1,300 mm, overall weight: 7,500 kg, This high-performance SCM Stefani Solution XD is engineered for high-volume multi-shift industrial manufacturing, delivering continuous accuracy and a flawless edge finish even on the most sensitive high-gloss or thin-film materials. Equipped with a solid monolithic structure and advanced NC electronic touch controls, this specific 4-cabinet configuration maximizes stability and houses a comprehensive setup of high-end processing aggregates. Manufacturer: SCM Group (Italy) Model: Stefani Solution XD Configuration: Right-Hand Feeding Giedpszcccrefx Albeu Condition: Excellent, Fully Operational Location: Plovdiv, Bulgaria Availability: Immediate Estimated Footprint & Shipping Dimensions Total Machine Length: Approx 8,000 mm Total Transport Length: Approx. 8,300 mm (including extended infeed guides) Machine Width: Approx. 1,300 mm (transport width with side panel supports retracted) Machine Height: Approx. 1,950 mm (with safety hoods closed) Estimated Operating Weight: 7,500 kg Technical Specifications Feed Speed: Up to 25 – 30 m/min (NC-controlled variable track speed) Panel Thickness Capacity: 8 mm to 60 mm Edgeband Thickness Capacity: 0.3 mm to 22 mm Max Coiled Edge Capacity: 3 mm Actuation Type: Pneumatic & Multi-Axis Electronic Servo Motors Height Adjustment: NC-Motorized Automatic Top Belt Pressure Beam Pneumatic Requirement: 6 bar Control System Software: Maestro Pro-Edge / Active Edge Interface Premium Installed Working Units (Aggregates) This machine features a robust multi-station arrangement with a multi-hose high-efficiency central dust extraction layout: Pre-Milling Unit: High-capacity dual cutter block layout utilizing Hydro-Lock tool connections to guarantee zero vibration during panel edge squaring. Advanced Gluing Station (VC-600): Plasma-treated glue pot capable of rapid EVA and PUR hot-melt changes, backed by rapid pre-melting technology. End-Trimming & Fine Trimming Units: Rigid, low-inertia dynamic structures built to ensure zero scoring on fragile surfaces. Round 4 Corner-Rounding Unit: Multi-axis 4-motor high-speed profile rounding unit processing at up to 30 m/min. Finishing Stations: Multi-edge profiling scrapers, glue scrapers, and motorized buffing units for an out-of-the-box clean edge. Automated Axis Positioning: Complete machine changeovers happen in minutes directly from the touchscreen console, maximizing uptime. Top Track Pressure Belt System: Secures fragile components far better than traditional small-wheel setups to keep protective films pristine. Energy Management Built-In: Programmed with the SAVENERGY system to reduce plant power consumption during cycle idle times.

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Gisdjyvv Trspfx Albju Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Gijdpfxjx Swc Hs Albeu Y axis working area: 2280 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Total number of tool changer positions: 24

Condition: used, Year of construction: 2023, Special price – Showroom machine Garbsen INDUSTRIAL AUTOMATIC EDGE BANDING MACHINE stefani md (the images of the machine are not binding with regard to the actual features specified below) KEY FEATURES EDGE BANDING OF SOLID WOOD UP TO 15 MM THICKNESS: SIMPLE AND FUNCTIONAL PROCESSING OF EDGES WITH LARGE DIMENSIONS "SGP" GLUE TANK: USE OF EVA AND POLYURETHANE GLUE FOR A PERFECT GLUE JOINT "STARTOUCH" CONTROL: A TOUCH IS ALL IT TAKES TO OPERATE THE MACHINE GENERAL FEATURES Automatic single-sided edge banding machine for applying edge banding with hot melt adhesive to the four sides of straight panels and for subsequent finishing. Machine frame and longitudinal supports made of cold-rolled steel in a box construction, manufactured in a single element, for high rigidity and vibration-free operation to accommodate the working units. Openings with slides for discharging any remaining chips to the floor. Upper pressure beam made of thick-walled steel construction and with columns made of cast iron, for a vibration-free structure where the working units are attached. Pressure rollers on the feed chain in a double row, made of rubber with a high coefficient of friction and with sliding on bearing rollers. Device to protect the pressure rollers from any remaining chips. Electronic adjustment of the upper pressure unit, depending on the panel thickness. Upper working units attached to the pressure beam or mechanically connected to ensure automatic adjustment when changing the panel thickness. Lower working units attached to the machine frame or to the longitudinal support, for a precise reference to the panel. All high-frequency motors are operated via frequency inverters. Protective cover for all units positioned after the gluing unit. Windows made of polycarbonate ensure a good view of the units during processing. Interior lighting of the cabinet. Protective cover with sound-absorbing material for lower noise emissions during processing. The spacer on the infeed guide allows the machine to be fed in the correct spacing. The spacing is automatically adjusted to the selected feed speed. Extraction nozzle arranged on the soundproof hood. Swivel control panel in an ergonomic position at the machine infeed. The electrical system complies with current regulations. Electrical components housed in a metal housing, attached to the machine frame and provided with doors for convenient access during any maintenance work. Panel feed The panel feed is carried out via a feed chain consisting of rubber sliding blocks with a high coefficient of friction, attached to a 1-1/4" industrial chain. The chain slides on 2 guides made of hardened and ground steel, a round guide and a flat guide, to guarantee a straight feed and protect against lateral displacement. Automatic lubrication of the chain. The amount of lubricating oil is optimized by the control system depending on the panels being processed. Support roller track externally and positioned along the entire length of the machine; consisting of an extendable opening system with sliding on linear bearings and plastic sliding rollers with steel pivot pins. "STARTOUCH" CONTROL Main features: 12" touchscreen color display Graphical representation of all processing units and their status (on/off) Gedpjzc Ilxsfx Albjiu

Condition: used, functionality: fully functional, SCM T130 Undercut Spindle Moulder Spindle diameter: 35mm Total spindle length: 160mm Main motor power: 5.5kW Spindle speed, belt-driven, adjustable: 3000/4500/6000/7000/10000 rpm Gjdpfx Alszakgmebjiu Spindle rotation: both left and right Electric spindle lifting mechanism

Condition: excellent (used), Catalogue number: 7863 TECHNICAL DATA - Track width: 300mm - Working shaft width: 300mm - Max. disc diameter: 350mm - Disc bore diameter: 70mm - Max. cutting height: 120mm - Table width with extension: 750mm - Table length: 1530mm - Top: - Kickback barriers (protection against material reversing) - Metal sliding roller - Kickback barriers - Metal sliding roller - Shaft with saw blades - 2 smooth metal sliding rollers - Bottom: - Guide bar - Kickback barriers - Track - Laser - Centralised track lubrication - Infinitely variable feed speed via inverter - Feed motor: 1.5kW - Main motor: 26kW - Brake - Extraction port diameter: 200mm - Overall dimensions (L/W/H): 1700x1400x1600mm - Weight approx.: 1700kg ADVANTAGES - Italian manufacture - Equipped with laser - Very good condition - Used multi-blade saw Net price: 39,900 PLN Net price: 9,500 EUR (based on an exchange rate of 4.2 EUR) Gjdpozbavgefx Alboiu (Prices may vary subject to higher exchange rate fluctuations)

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Features and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 10000 rpm Spindle height adjustment via handwheel Godexllxaopfx Albeiu Installation dimensions: 1200x80x1350 mm Fence jaws made of wood Incl. Holz Her 3-roller feed unit incl. stand With chassis Availability: short-term Location: Röllbach

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- INCLUDES extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): ----- - ??Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Gisdpfxjy Hl Iys Albeu Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: excellent (used), CATALOG NO. 7967 TECHNICAL DATA - Maximum working width: 1100 mm - Maximum working height: 170 mm 2 units: 1) Grooved metal roller for calibration 2) Grooved rubber roller + shoe + metal roller – Top side: - Rubber pressure roller - Unit (two units on one motor) 15 kW - Rubber pressure roller - Outfeed rubber roller - Belt cleaning by air blast – Bottom side: - 2 metal pressure rollers - Feed belt - 2 rubber pressure rollers - Pneumatic belt oscillation - Grinding thickness potentiometer - Electric and manual table lifting (for precise adjustment) - Pneumatic brake - 2 feed speed options - Working pressure: 6–8 bar - Extraction nozzle diameter: 2x140 mm - Overall dimensions (L/W/H): 1830x1670x1950 mm - Weight: 1160 kg ADVANTAGES – Italian manufacture Giedoza Elwjpfx Albou – 2 sanding units – Not repainted – Used sander, perfect condition Net price: 77,900 PLN Net price: 18,550 EUR (based on 4.2 EUR exchange rate) (Prices may vary with larger exchange rate fluctuations)

Condition: reconditioned (used), Number of spindles 6 St. Working width 240 mm Working height 120 mm Dimensions (L/W/H) 4900 x 1700 x 1700 mm weight of the machine ca. 3500 kg Control Mobile 10 SCM SUPERSET NTE 31 PLUS automatic profile milling machine with 6 shafts 14 axis control with touch screen - WINDOW VERSION Machine with 6 spindles Spindle speed 8,300 rpm Working width 240 mm, working height 120 mm Electronic horizontal and vertical positioning of the spindles Glazing bead cutting Touchscreen controls Detailed technical description, see Gijdsyhxmuspfx Albju adjacent PDF documents. Suction nozzle diameter: 1. Spindle down: 120mm 2nd spindle right: 120 mm 3. Left spindle: 120 mm 4. Spindle top: 150mm 5. Spindle top: 150mm 6. Spindle below: 120mm Images are from our archive of a machine of the same model. (Technical information according to the manufacturer - without guarantee!)

Condition: ready for operation (used), Working width 410 mm Length of the planing table 1450 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 2650x850x1100 mm weight of the machine ca. 750 kg Surface planer F 410 N ----- Technical manufacturer's description: Gjdpfx Aljwzmu Debjiu Planing width: 410 mm Total table length: 2600 mm Table height: 855 mm Feed table length: 1450 mm Aluminum planing fence swivels up to 45° Planing fence dimensions: 1100 x 170 mm 4-knife planing shaft diameter: 120 mm Knife shaft speed: 5000 rpm Motor power: 4 kW TERSA monobloc one-way reversible cutterhead SCM dressing protection device integrated in machine stand 120 mm diameter extraction nozzle Manual star-delta switch Motor protection switch, undervoltage release Lockable main switch Automatic motor brake Pivoting auxiliary fence ----- Price of the above machine on request! ----- (technical data according to manufacturer - without guarantee!) All prices quoted are net and subject to VAT.

Condition: reconditioned (used), Year of construction: 2017, Number of spindles 5 St. Working width 240 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 6-36 m/min. Weight ca. 3500 kg control SCM Control 10 SCM Superset NT with workpiece return ----- The machine is in cleaning and completely checking process at the moment. Brief Summary: ----- - 5 spindles - Powerful motors - Left and upper spindles controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system 3rd spindle ----- First left vertical spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm T-set quick-clamping system Electronic horizontal positioning / motorized width adjustment 4th spindle ----- Giedpjwwl Nlsfx Albsu First upper horizontal spindle Motor with brake 11.0 kW Diameter 40 mm Speed 6,000 rpm T-Set quick-clamping system Electronic radial positioning / motorized height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake 7.5 kW Diameter 40 mm Speed 6,000 rpm SCM Control 10 Includes workpiece return system Includes existing used planer heads. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 1995, functionality: fully functional, SCM Sandya 10 SCM 1100 R+R+RT Wide Belt Sander Specifications: • Condition - used, after a comprehensive inspection • Manufacturer - SCM • Model - Sandya 10 • Working width - 1100 mm • Max. working height - 160 mm • 4 sanding units in sequence: - Steel calibration roller - ø 160 mm - Hard rubber roller - ø 160 mm - Combi unit (rubber roller + segmented platen with step function) - Dust removal brush • Main motors with power of 18.5 and 12/15 kW • 2 machine operating speeds (on the second motor) • Infinitely adjustable conveyor speed • Electronic thickness indicator for the sanded part • Oscillation on the optics • Air blow on the 2nd and 3rd units • Possibility of lowering/raising each unit separately • Thickness gauge for the sanded part • Table prepared for a vacuum pump (pump not included) • Abrasive belt size - 2150 x 1115 mm • Dust extraction connections: 4 x 155 mm and 4 x 120 mm • Weight approx. 1,800 kg • Year of manufacture - 1995 • Overall dimensions 220 x 180 x 210 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to switch on and check the device on-site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Gsdpfx Ajzcy I Eslbjiu Financing and transport: • We arrange transport using the MDD fleet, courier companies, or external carriers • We offer financial support in the form of leasing or leasing financing