Used Select Stair Milling Machine for sale (66,865)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 Njdpsyxr T Tjfx Akfjwf With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 300 mm, CNC stair milling machine with 4 controlled axes. 4 units Yaskawa servo drives. Working length 5500 mm. Working width 900 mm. Working height 300 mm. HSD 7 kW milling motor with tool change system. 5-position fixed tool changer station. 8-position rotating tool changer station. 20 vacuum suction cups. Conveyor belt with chip removal and extraction connection. Enclosures (mechanical and light barriers). The machine requires a new central monitoring system in the control unit. The machine is in good technical and mechanical condition. Nedpfx Ajyxtn Eekfewf

Condition: not inspected (used), Year of construction: 1984, 1 milling unit 2.8/3.5 kW nominal current 6,4/9,3 A workpiece thickness max. 130 mm Lateral table for routing work Nwsdjga Tu Dspfx Akfof

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, SELECT 20800 step milling machine for recessing treads and risers into stair stringers and posts. The machine features stops for tread length, tread thickness, riser length, riser thickness, and projection dimension. In a single clamping, one tread and one riser can be milled in approximately 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Voltage: 3-phase, 400 V. Maximum clamping height: 300 mm. Nedpfswut Abjx Akfjwf

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. You can adjust the step length, step thickness, riser thickness, tread height and step nose. Nwodpfxsv H D Tvs Akfsf The machine has been completely overhauled and is technically in mint condition. Newly painted.

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Nwjdpsyxzacefx Akfsf

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW Njdpsyahv Sjfx Akfowf EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots Njdpfx Aksx D Tbmsfowf T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Nedpfxsxxb Rrj Akfjwf Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Nwedpfeyzxz Nox Akfof Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, table length: 1,800 mm, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 540 mm Travel Z-axis: 520 mm Main spindle power: 7.5 kW Spindle speed: 275 - 2,000 rpm Table length: 1,800 mm Table width: 400 mm Nodoy Avvaepfx Akfswf MACHINE DETAILS Control manufacturer: Heidenhain Number of axes: 3 Tool holder: BT50 Power: 12.0 kW Dimensions & Weight Dimensions (L x W x H): 2100 x 2100 x 2200 mm Weight: 3,600 kg EQUIPMENT Tools

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 1,800 rpm, table length: 7,000 mm, TECHNICAL DETAILS Travel range X-axis: 5,300 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 2,000 mm Table size: 7,000 x 1,000 mm Tool holder: SK 50 Spindle speeds: 12.5 – 1,800 rpm Spindle motor: 22 kW Feed rate range: 6 – 10,000 mm/min Rapid traverse: 15 m/min Nedsy Dg I Nopfx Akfowf Number of tool changer positions: 24 MACHINE DETAILS Total power requirement: 70 kW Dimensions & Weight Space requirements: approx. 8.7 x 4.7 x 4.1 m Machine weight: approx. 30 t EQUIPMENT Electronic handwheel Automatic swivelling milling head, vertical/horizontal 2 x 180° Milling head swivels automatically in the rear axis 72 x 5° Automatic tool changer (ATC 24) Coolant system Extended cross travel (Y-axis) 1,500 mm Extended vertical travel (Z-axis) 2,000 mm

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Nwjdsyf A H Nopfx Akfef Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: excellent (used), functionality: fully functional, Minimax Router 600 Overhead Spindle Moulder Spindle to arm distance: 600 mm Nodpfjy Hhv Tox Akfewf Two-speed spindle drive motor: 2.2/1.5 kW Two spindle speeds: 9000/18000 RPM Spindle tilt adjustment: 45-90-45 degrees Vertical spindle stroke: 80 mm Height-adjustable work table Pneumatic spindle control with foot pedal

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Minimum length of the processed element 470mm Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs Njdpfxov Tv Urj Akfjwf

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, milling length: 750 mm, milling spindle length: 750 mm, spindle stroke: 150 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Nwedpfx Akjxzimtsfof Working length: 750 mm Maximum milling height: 150 mm Spindle diameter: 50 mm Spindle motor power: 15 kW Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Machine dimensions: 1450 x 1600 x 1800h mm

Condition: excellent (used), Manufacturer: OPTIMUM Maschinen Germany Model: F150 Type: CNC milling machine / machining center Spindle: 12 kW (S1: 9 kW) Power supply: 400 V / 50 Hz Total power: approx. 25 kW Nodsy E Nqvepfx Akfowf Machine weight: approx. 3520 kg Tool taper: BT40 X-axis travel: approx. 750 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Work table: approx. 800 × 450 mm (T-slots) Tool changer: automatic Chip conveyor: integrated

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2792.28 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Nodpsy Hf Rzofx Akfowf EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.410 with intermediate table and table height adjustment via toothed rack OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2625.31 € 10 mm B 16 220 mm 60 - 6000 U/min 0,54 kW 350 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug Nwjdpsy Hf Rnefx Akfof 3 years warranty for single shift Operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3303.85 € 6 mm B 12 220 mm 100 - 10000 U/min 0,54 kW M5 452 mm 700 mm 1130 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 6/8 (in E335/ST60) Drilling capacity / normal drilling performance Thread cutting system Control panel with OLED display Nsdpfx Akoy Hf Rhjfjwf Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 2292.56 € 10 mm B 16 220 mm 250 - 3000 U/min 0,45 kW 320 mm 520 mm 820 mm 44 kg 60 mm 140 - 315 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 10/12 (in E335/ST60) Robust, high quality and inclined rotation hood for easy speed reading LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Undervoltage release Njdoy Hf Rbspfx Akfewf Drill protection with electr. Fuse Connection cable with Schuko plug (1.2 m) 3 years warranty for single shift operation Art. - No. 217.400 with drill head height adjustment OPTIONS: Machine cabinet with door and drawer Drill package 2 (vice & keyless chuck)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 3649.63 € 15 mm MK 2 220 mm 40 - 4000 U/min 0,75 kW M12 400 mm 520 mm 850 mm 65 kg 70 mm 85 - 370 mm 300 x 250 mm 70 mm Drilling capacity / normal drilling Performance 15/18 (in E335/ST60) 17 Nm Thread cutting system Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic Drilling depth stop Stepless speed control via central rotary knob Nwsdpfx Akjy Hf Nwjfjf EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with Schuko plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Machine cabinet with door and drawer Drill package (vice & keyless chuck)

Condition: used, functionality: fully functional, Metal milling machine Gualdoni E50 Njdpsy Eqdhofx Akfswf Table length: 1400 mm Y-axis: 300 mm Z-axis: approx. 450 mm Spindle motor power: 4 kW

Condition: excellent (used), Year of construction: 1989, x-travel 1500 mm y-travel 1000 mm z-travel 700 mm table: 1500 x 1000 mm Nedpfx Aksu Id N Defjwf control FIDIA weight of the machine ca. 11 t

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Clamping table area mm 250 x 1130 Working stroke: longitudinal mm 800 cross mm 350 vertical mm 450 Taper in spindle ISO 40 Range of revolutions r.p.m. 45 - 4500 Number of revolutions steps 16 Main motor output kW 2,2/3,0 Total machine input kVA 4,0 Machine dimensions mm 2650 x 1980 x 2260 Nwodpfsy Enumox Akfof Machine weight kg 1760