Used Sensor Head Color Camera for sale (21,706)

Condition: excellent (used), functionality: fully functional, For sale is a Keyence IV2-G500CA vision sensor, color version, from the high-performance IV2 series by Keyence. The device is in excellent optical and technical condition – tested, clean, and free of damage. The IV2-G500CA is a compact color vision sensor with integrated illumination, ideal for use in industrial image processing, quality control, and automation applications. Technical specifications: Ncjdpfx Aox Hyt Roflow Model: IV2-G500CA Type: Color camera / vision sensor Manufacturer: Keyence Corporation (Japan) Series: IV2 Series Compact design with integrated lens and illumination CE and KC certified Connection via Keyence IV2 connection cable (not included) Scope of delivery: 1× Keyence IV2-G500CA sensor head (without controller, cable, or additional accessories) Note: A compatible IV2 controller (e.g., IV2-500C or IV2-500MA) and a connection cable are required for operation. The device offered here is the sensor head only, not a complete system.

Condition: used, Video camera -aus: warehouse liquidation -Color camera -Dimensions: Ø 24 x 75 mm -Weight: 120 g Nodpfx Afsd E Uqfelecw

Condition: good (used), Video camera -from: Warehouse clearance -Color camera -Dimensions: Ø 24 x 75 mm Ncodpfx Aed E Uqijflsw -Weight: 100 g

Condition: good (used), Hang 150 Double-Head Riveter for Binders Manufacturer: Hang Germany Machine has been overhauled and is ready to use. Ncjdpfx Afjzhkivjlow The machine is used for riveting all types of ring mechanisms. Two riveting heads with adjustable spacing. Cardboard thickness: 0.2-4mm Throat depth: 310mm Head spacing: adjustable from 35-440mm Cycle time: 0.5s Weight: 570kg Power supply: 380V The cycle is initiated by a foot pedal.

Year of construction: 1998, condition: excellent (used), Max. roll diameter unwinder: 750 mm (Shaft 76) Max. roll diameter rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufactured by: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are slim; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm Nsdpozn Ayysfx Afljcw 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x razor blades

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Ncedpfeb Rnv Ssx Aflow Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: used, REF: MM6436 Chinese 4-head filler with gating system and touch-screen controls. Nedpjza T I Hjfx Aflocw Valves capable of hot filling. Previously used for filling a 500ml syrup product, potentially 250-1000ml range. Electric requirements - 240V / 50 hz / 1 ph. Belt - 82mm. Overall dimensions - 2100mm long x 1030mm wide x 1950mm high. Will need guarding to meet CE spec.

Condition: ready for operation (used), Year of construction: 2010, HP Indigo 5500 Digital Press 6 color Only 8.4 mios Fully Functional Includes Chiller Available for immediate shipment, this HP Indigo 5500 is in excellent working condition Model: HP Indigo 5500 Condition: Fully functional and production-ready Ncedpfx Aox Hrpqsflew

Condition: used, Drilling capacity: 35/40 mm Spindle mounting: MK 4 Overhang: 230 mm Table size: 1050 x 625 mm Table height above floor: 560 mm Ncsdpfx Aeb N Ahloflow Small/large distance between table and drill chuck: 549/960 mm Chuck travel: 170 mm Spindle speeds, continuously variable: 50 - 800 rpm Space requirement: 1050 x 1000 x 2170 mm Weight: 250 kg

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Nodpepu A D Aofx Aflscw Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm Nedpfxji Apuhs Aflocw - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: used, This listing is for the Watson Marlow 313DW Peristaltic Pump Head The unit is in full working condition and is ready for immediate release Key Features The Watson-Marlow 313DW is a single-channel, rapid-load peristaltic pump head designed for laboratory and industrial fluid handling applications. It is part of the 300 Series, known for their flip-top design that facilitates quick and easy tubing changes. Key Features Ncedexv Apwepfx Aflow High Flow Rate: The 313DW model is equipped with a three-roller mechanism, enabling a maximum flow rate of up to 2,000 mL/min when using 1.6 mm wall thickness tubing. Tubing Compatibility: Accepts standard 1.6 mm wall thickness tubing with bore sizes ranging from 0.5 mm to 8 mm, offering flexibility for various applications. Durable Construction: The pump head is built with a glass-filled polypropylene back; IXEF front; glass-filled nylon rotor, clamps, and mounting plate; and MoS₂-filled nylon rollers. These materials ensure strength, chemical resistance, and long service life. Roller Options: Choose the three-roller model for high-flow applications or the four-roller model for smoother flow and reduced pulsation. Extension Capability: Add up to five extension pump heads, depending on the type and size of tubing used. Note: The number of extension pump heads allowed depends on the type and size of tubing being used. Warranty: Includes a 1-year manufacturer warranty for quality assurance. Applications Chemical Processing: Ideal for accurate, contamination-free chemical transfer. Biotechnology: Suitable for sterile fluid handling. Food and Beverage: For transferring additives, colorants, and ingredients. Water Treatment: Used in dosing and chemical feed systems

Condition: new, power: 338 kW (459.55 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, brakes: intarder, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: central locking, cruise control, fog lights, spoiler, = Additional options and accessories = - CD - Immobiliser - Spoilers - Sun visor - Tachograph = Remarks = Country of origin: SPAIN Ncsdsy Tymdepfx Aflsw Displacement: 11,120cc Brakes: Electronic Braking System Emergency Brake Assist Construction: Tractor Head ADblue tank 135L LED daytime running lights Mobile Phone preparation Bluetooth Fifth wheel Electr. And headed rear view mirrors Rear differential lock Electr. Stability Programm ESP Air Suspended front seats Electronic Stability Programm ESP Lane Departure Warning System Model: AS440S46T/P Exterior Color: White Cylinders: 6 Kilometer: 740,000 km less than Interior Color: Med. Grey Max Axle Load: 8,000 / 13,000 kg

Condition: new, power: 346 kW (470.43 HP), fuel type: diesel, axle configuration: 6x6, wheelbase: 3,800 mm, fuel: diesel, gearing type: mechanical, emission class: euro3, Year of construction: 2026, Equipment: air conditioning, cruise control, differential lock, fog lights, = Additional options and accessories = - Immobiliser - Spare wheel = Remarks = Cabin type: Active Time Country of origin: Spain Displacement: 12,900 Steering: LH Drive Construction: Tractor Head EBS + BAS Type: AT720T47WTH Fifth Wheel: Jost fifth wheel Rear Axle : HR-TP Colour: 50105- White IC 194 Headlamps Protection Roof Rotating LED lights Reverse Buzzer Pneum. Horn-Chassis Without PTO preparation Bunk Curtains External Sunvisor 2 lowered bunks w/o prot net Headed Electric rear mirrors Drive T. 14.00R20 Front Multileaf Susp Speed Limiter 80KM/H Rear Axle ratio 5.01 Senza ADM Safety Hor. Filter Cartridge Horizontal air filter 630cc air compressor Standard airtank plating Steel air tanks 90A alternator Standard gear mode 08329 APU free discharge Horiz Batt side fram STD cab insulation Standard grey plastic part Without roof 02640 Mechanical Cab Suspension Manual Cab Tilt AT low roof cab Roof in standard color Standard reverse Temperate countries preparation S Disp oper ped post Fabric air susp driver seat Limitation on CC Lower exhaust pipe Eng RPM = 1900 REV/ 5th W EC POSI06139 front anti roll bar Rear anti roll bar Filter HP TR/NO heat Serb. Comb. 390L ZF 16S 2520 to GBOX Standard Headlights Plates in ECC languages Jack R. overhang 780mm Loads 8000-130000-13000 kgs Bulb rear lights Mechanical battery switch Fabric Sta. 2 way adj. pass Engine plate radiator guard Provision radio and CB Rear suspension no spacer Rear cross member Rear multileaf susp Steel wheels Twinned wheels Grey IC44 chassis Standard cab trim mph/kph speedometer soft touch foam steering wheel with stickers79240 Aux. chassis for 5th wheel Pre heater Generic towhook Trattam. Prot. STD 15 Pin trailer plug Towing version Ft/Rr Torque 1:1 Tyre inflation hose VIN code check digit warning Triangle Radice VIN WJM STD setting C11/C13 Ncsdpfx Afsy Tylgelsw Steel front bumper = More information = Number of cylinders: 6 GVW: 33.000 kg

Condition: excellent (used), Year of construction: 1990, LEDINEK BSG 150 head sharpener with knife setting device - in a warehouse - Slovak production TECHNICAL PARAMETERS engine power 0.55 kW sharpening length 440 mm tool diameter 125 mm - 203 mm manual feed Ncsdpjihpl Rsfx Aflsw spindle diameter 50 mm knife setting device Machine dimensions: 120/85/165 cm weight 400 kg

Condition: excellent (used), Catalog number 7994 TECHNICAL DATA - max. width of the workpiece 230mm - max. height of the workpiece 130mm 7 spindles: Nodpfx Aey T Nu Doflocw 1) horizontal lower 230mm 4kW 2) vertical right 130mm 3) vertical left 130mm (2 and 3 spindles) 11kW 4) horizontal upper 230mm 5.5kW 5) horizontal upper 230mm 5.5kW 4 and 5 spindles are electrically adjustable up/down 6) horizontal lower 230mm 4kW 7) universal 230mm, adjustable at an angle of 360° 5.5kW - all spindles adjustable up/down, left/right - spindle diameter 40mm - 4 infeed rollers from above, geared, pulling - 4 outfeed rollers from above, pulling, rubber, smooth, including 3 double rollers - metal roller from below, pulling - feed on cardan shafts - rollers pneumatically pressed - stepless speed adjustment of the feed rate on an inverter - feed motor 3kW - working pressure 6-10 bar - electric adjustment of the planing thickness - central lubrication of the table - length of the infeed table 1960mm - diameter of the dust extraction nozzles 3x120mm, 4x140mm - dimensions L/W/H 5360x1800x1660mm - weight approx. 4000kg ADVANTAGES – German production, WEINIG brand – with 7 heads – DTR documentation – universal spindle – used planer, very good condition Net price: 75900 PLN Net price: 18070 EUR, depending on the exchange rate of 4.2 EUR (Prices may vary due to significant fluctuations)

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 Ncedszpbrqjpfx Afljw - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: excellent (used), CATALOGUE NUMBER: 6679 TECHNICAL DATA - max. width of workpiece: 250mm - max. height of workpiece: 170mm 6 spindles: 1) horizontal lower: 250mm, 5.5kW 2) vertical right: 170mm, 5.5kW 3) vertical left: 170mm, 5.5kW 4) horizontal upper: 250mm, 7.5kW 5) horizontal lower: 250mm, 7.5kW 6) universal: 250mm, adjustable at 360°, 5.5kW - 6 spindles, electrically adjustable up/down - all spindles adjustable up/down, left/right - spindle diameter: 40mm - 6 top feeding rollers, toothed, pulling, including 2 double rollers - 6 top delivery rollers, pulling, smooth rubber, including 2 double rollers - 2 top pressure rollers - 1 bottom feeding roller, toothed, pulling, swiveling on the table in front of the first spindle - 2 bottom delivery rollers, pulling, smooth metal - 4 bottom side pressure rollers - feed via Cardan shafts - rollers pneumatically pressed - stepless feed speed adjustment on a frequency converter, 6-30m/min - feed motor: 4kW - working pressure: 8-10bar - electric adjustment of planing thickness - body lifting motor: 1.1kW - central lubrication of the table - length of the infeed table: 2180mm - diameter of extraction nozzles: 6x150mm - dimensions (L/W/H): 5000x1800x1900mm - weight: approx. 4600kg ADVANTAGES - Made in Italy - 6 heads - DTR + CE documentation - Ideal for both wet and dry wood - Universal spindle Nodpfszlrznjx Aflecw - Excellent condition / like new Net price: 114900 PLN Net price: 27350 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (prices may change in case of significant exchange rate fluctuations)

Condition: used, Vertical milling head, milling head, angle milling head MAHO suitable for MH300 or MH400. Year of manufacture approx. 1990. Tool holder: SK 40. Quill stroke: 60 mm. Centering diameter on the flange plate: 102 mm. Outer diameter of flange: 180 mm. Bolt circle on flange plate: Ø 150 mm. Mounting holes on flange plate: 4x Ø 11 mm. - Quill feed: 0.015 / 0.03 / 0.06 / 0.12 mm/rev. - Head drive via shaft Ø 32 with 10 mm keyway. - Knurled wheel with scale for quill stroke. - Angle scale on angle milling head 2x 90°. Dimensions L x W x H: 300 x 280 x 300 mm. Total weight: 31.4 kg. In good condition. Nedpfx Aoxf Ur Neflecw

Condition: used, Keyway milling head, head for DECKEL milling machine, type FP 1 Factory number: 21948 Dovetail width: approx. 74 - 88 mm Dovetail height: approx. 14.5 mm Dovetail length: 285 mm Distance from the front edge of the dovetail to the center of the gear: approx. 200 mm Stroke size: max. 80 mm Stroke rate: max. 475 double strokes/min. Tool holder: 4-sided, 16 x 16 mm with clamping plate - Stroke size adjustable via eccentric adjustment - Drive from the machine gearbox, within the dovetail guide (as with the normal vertical head) Nodpfx Asznn Hrsflecw - This keyway milling head is inserted into the dovetail guide in place of the normal vertical milling head (Mounting in place of the vertical milling head) - Drive gear in the keyway milling head, 39 teeth, gear width 15 mm, presumably 15° pressure angle - Keyway milling head can be rotated 360° on the flange plate, degree scale +/- 35° - Small breakout point on the housing Weight: 28.5 kg DECKEL FP1 has a pressure angle of 15° on the drive wheel. DECKEL FP2 + FP3 have a pressure angle of 20° on the drive wheel.

Condition: reconditioned (used), functionality: fully functional, The used MIND DART DL4 rapid-feed milling machine is particularly suitable for tooling work, thanks to its tilting head and the ability to use a quill (including with automatic feed) with automatic lubrication of the guides. Ncedpfx Aeznvmyofljw Equipped with independent automatic feeds, it also includes a dividing head with tailstock and related gears, dividing set, and some tools. The machine has been refurbished to meet standards and is in perfect working order.

Year of construction: 2011, condition: reconditioned (used), functionality: fully functional, HSS discs, Ø 350 mm – thickness 2.5 mm – number of teeth 280 – tooth pitch 4 mm. Three-phase motors with 2 speeds, 2.2/1.4 kW – 1440/720 rpm – 230/400V – 50 Hz Direct motor-to-disc drive Disc arbor, Ø 32 mm Blade rotation at 4 different speeds (15 – 30 – 45 – 90 rpm) Pneumatically rotating worktable from 90° to 45° inwards Head with vertical sliding movement on a linear guide First head, fixed Second head, mobile: automatic positioning with manual override option Nsdozl Ub Dspfx Aflocw Positioning speed (automatic) of the mobile head: 20 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Roller conveyor for the mobile head (3 m) Minimum cutting length between the two heads: 480 mm Maximum cutting length between the two heads: 5000 mm Manual kit for undercutting Oleopneumatic disc feed (adjustable feed speed – rapid approach and retraction)

Condition: ready for operation (used), Dittel Marposs AE-SENSOR-SF 2xM5 3.0 VM10P O3PZ1114207 SN O16LW2808, used, in good condition, 100% functional, scope of delivery as shown in the photos. Ncedpfxeznq Ncs Afljw

Condition: ready for operation (used), Dittel F21518 / sensor with protective hose, SN 05238 FC-C, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nedpoznq I Sofx Afljcw

Condition: like new (used), Year of construction: 2015, I sell the 4-head brushing machine Prochera SP-300 x 4C 4 Brushes 0-1500 rpm Right / Left 1 Polishing brushes Feeding speed 0-23 m/min. Max. Working width 300mm Max. Working thickness 100mm Year : 2015 Weight : 1500kg Total power: 17,2 KW Ncodpfxszn Ax Nj Aflew + Spare brushes. Metal, Tynex, 2 pcs. horse hair Still in production. Possible to test. Available immediately.