Used Sml Coex Cast Film Extrusion Line for sale (12,372)

Year of construction: 2011, condition: good (used), The extrusion line No. 1 was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system INFRA STRUCTURE (ADDITIONAL UNITS): Dryer 1 – 4 with 4500-liter volume; heating capacity 48kw
 Dryer 5 with 2500-liter volume; heating capacity 20kw
 Dryer 6 with 1500-liter volume; heating capacity 15kw
 Each extruder has a gravimetrical batch-dosing unit with 3 stations. Each extruder has a melting pump and a 2-piston filter change system. MAIN LINE COMPONENTS MANUFACTURERS: SML: extruder; Chair, rollers, winding device GWK: cooling extruder KREYENBORG: screen changer Cloeren: feed block, slot die PIOVAN: dryer, dosing device SERVE: Edge band cutting device MATHO: suction RAPID: Edge strip shredder KONGSHILDE: Recyling edge strips, start rollers INFSTAUB: filling station Rcodjpah U Tspfx Afhjd SMK: chillers SIEMENS: control OCS: camera system SEMET: labeling system AFS: Corona Sation BETA CONTROLL: Radiometric thickness measurement SML: autom. FYLING SPLICE winding unit, BECKOFF control SIMCO: antistatic ALTEK: automatic roll manipulator (transfer carriage)

Year of construction: 2000, condition: used, General Technical Description: The Macchi 3-Layers is a three-layer blown film co-extrusion line designed for the production of high-quality tubing and sheeting films. The line is capable of processing LLDPE, LDPE, mLLDPE, MDPE, and HDPE. Film production utilizes an upward bubble-up working principle. The machine is equipped with a 350 mm 3-layer die head and delivers an output capacity of up to 450 kg/hour. EXTRUSION GROUP: Extruders: 65 mm + 80 mm + 65 mm • Infrared heating zones • Hydraulic screen changers The Coexflex Size 3 extrusion group includes: – Two high-performance extruders 65/30D (layers A and C) – One high-performance extruder 80/30D (layer B) – Bimetallic barrels – Nitrided, high-mixing screws – Water-cooled grooved feed sections – AC motors with digital frequency converters (74 kW for 65 mm, 100 kW for 80 mm) DIE HEAD: • Model TE502 • 350 mm diameter, die gap 1.8 mm • IBC (Internal Bubble Cooling) • Electroless nickel-plated flow channels • 4+4 ceramic heating zones • Mounted on a die cart with integrated air distribution manifold COOLING SYSTEM: • Dual-lip Plast-Control air ring • Coexflex version includes Double Flux Cooling Ring ASR3, with inverter-driven blower and interchangeable inserts TAKE-OFF UNIT: • Take-off width: 1800 mm • Oscillating nips • Side gusseting capability WINDING SECTION: • Double automatic back-to-back winder • Fully automatic roll change • Maximum winding width: 1750 mm • Cardboard core diameter: 76 mm FILM SPECIFICATIONS: Film widths achievable with 350–400 mm die: 1300–1700 mm Rcedpfx Aoyt Ikvefhjd Thickness range: 18–200 μm Output example (Coexflex specs): 1600 mm width, 100 μm LDPE → 400 kg/h LINE SPECIFICATIONS: • Total line height: 10 m • Mechanical winder speed: 7–110 m/min • Installed electrical power: 320 kW, 415 V, 3-phase + neutral • Cooling water consumption: 6 L/min • Compressed air requirement: 6 bar AUXILIARY EQUIPMENT: • Tower • E+L web guiding system • Piovan gravimetric weight control • Piovan Quantum dosing units • Plast-Control automatic thickness control • Calibrating basket • Corona treater (Ferrarini & Benelli) • FBF cold-needle micro-perforation • Air shafts (8 pcs) This translation uses precise, industry-standard terminology suitable for machinery and equipment descriptions on professional trading platforms.

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Rcsdpfsu Ttf Nex Afhod Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: new, functionality: fully functional, Year of construction: 2022, Complete extrusion line for the production of PVC shrink film, specifically designed for sleeve-label applications. Built in 2022 by RL Plastproject (Italy), the machine is brand new, never installed, and immediately available. Redpfxow Ahfgs Afhocd Technical Specifications: Product: PVC shrink film for sleeves Material: Rigid PVC dry blend Extruder: Single-screw with venting and gravimetric dosing Output: approx. 180–200 kg/h Film thickness: 40–80 micron Usable film width: up to 620 mm Die width: 900 mm Line speed: up to 60 m/min (depending on film) Cooling: Calender with chill roll Orientation: Transverse shrink forming unit Corona treater: Integrated Winding: Dual-position slitter-rewinder Control system: Siemens PLC with touchscreen HMI Installed power: ~220 kW (to be confirmed) Air requirement: 6 bar Footprint: approx. 25 x 6 meters

Condition: good (used), Extrusion Line with Extruder & Co-Extruder. Sheet configuration B/A/B used for PP. Direct cooling unit (SMK) and SBI measuring unit newly installed in 2015. Rodpen Utt Hofx Afhscd * Max. output: 1350 kg/h * Main screw output: 950 kg/h * Main screw: 180mm / 33D * Co-extrusion output: 400kg/h * Co-extruder scew: 120mm / 33D * Die width: 650mm * Roll stack: 3 * Winding unit for Jumbo rolls up to 1500kg This Extrusion Line is already disassembled and secured for transport (Location: Waalwijk, Netherlands).

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, This extrusion system, featuring a LEISTRITZ ZSE 40 MAXX (28D) twin-screw extruder and a ventilation system, will be auctioned online on our RESTLOS auction platform as part of our industrial auction: "Liquidation of a well-known toy manufacturer - industrial equipment - packaging system - sorting system." Rcsdpjzpxn Njfx Afhsd Machine details: Complete extrusion system with two Leistritz extruders, including a ventilation system and a mezzanine. The system is suitable for a wide range of applications in the plastics, compounding, and processing industries and provides a solid foundation for industrial production operations. Scope of supply: • 2 x Leistritz extruders • Ventilation and extraction system • Associated system components and peripherals Technical data of the extruder: Type ZSE40MAXX-28D Year of manufacture 2011 Drive 125 kW Speed 1,000 rpm Manufacturer's description: The system includes two high-quality Leistritz extruders known for their reliability, performance, and precise processing. The system is complemented by a ventilation/extraction system that ensures optimal air circulation and a clean production environment. The system is sold as a complete package and is suitable for both expanding existing production capacities and setting up a new extrusion line. Additional documentation is available for the system and can be requested if interested. NOTE: There are also 4 silos available as optional extras for the system. A sealed bid can optionally be submitted for these in writing. Functionality not tested, but the system was in use until recently. ATTENTION: Mobile small peripherals are not included in this lot. Please contact us if you have any uncertainties about the scope of supply before placing a bid. The injection molding molds shown at the edge of the picture are also not included in this lot. We strongly recommend inspecting the lot! Subject to reservation This lot will be auctioned subject to reservation. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Year of construction: 1996, condition: excellent (used), film width: 1,300 mm, Used single-layer blown film extruder for sale in excellent condition, featuring a 150 mm die diameter and a production capacity of up to 100 kg/h. Model: Queens EP-65N Processable materials: LLDPE/LDPE/MDPE/HDPE/other blends. Screw diameter: 65 mm Head: • Blown film die head • Die diameter: 150 mm Die gap: 1.2 mm Output: Up to 100 kg/h, depending on material composition • Maximum speed: 120 m/min • Winding width: 1300 mm - Flying knife roll slitting Accessories included: • Tower • Gravimetric weight control system • Masterbatch dosing unit • Calibration cage Redpfx Aexrb Hmofhjcd The machine can be inspected in operation. Offered with spare parts.

Condition: used, Year of construction: 2021, functionality: fully functional, Sale of complete PVC profile extrusion lines We offer for sale 6 complete technological lines for the production of PVC profiles, originating from an operational production facility. The equipment dates from 2011–2025, with some units having undergone major overhauls. The technological lines include: • twin-screw conical extruder Pol-Service Majcher PSMD 65 / PSMD 65/132, • main motor power: 37 kW, • output: approximately 120 kg/h, • calibration table with 2 vacuum tanks (Pol-Service Majcher, Polreplast or Greiner – depending on the line), • caterpillar haul-off with guillotine (Greiner or Gruber Extrusion), Rodpjzlpabsfx Afhscd • stacking device, • vibrating station for unloading Big-Bags. Key information • 6 complete technological lines, • main motor power: 37 kW, • output: approximately 120 kg/h, • equipment from reputable manufacturers: Pol-Service Majcher, Greiner, Polreplast, Rawotechnik and Gruber Extrusion, • selected equipment after major overhauls, • available technical documentation and CE documentation for selected machines. Purchase options: • single technological line, • several selected lines, • complete machine park, • the entire facility with all production equipment. The price quoted is for one line. A detailed list of equipment, technical parameters, technical documentation and additional photos are available upon request. Location: Lower Silesian Voivodeship, Poland.

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Rcodpfouak Nlex Afhsd Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, 🔥 3D printing filament Extrusion Line – DEMO Unit | 1.75–5 mm | Up to 100 m/min | 12 months warranty High-performance extrusion line for production of filaments (3D printing, welding wires, technical strings). Reliable, fully automated solution directly from manufacturer. Completely made in the European Union. _____ Key Features • Materials: ABS, PLA, PET-G, MARLEX, DOWLEX and others • Filament diameter: 1.75–5 mm • PLC control with an automatic operation • Triaxial measurement for precise diameter control Rsdsy Ipflopfx Afhocd • Continuous production (compensator - up to 140 m of filament) • 3-zone cooling tank (up to 80 °C) _____ Technical Data • Line speed: up to 100 m/min • Output: 5–20 kg/h • Screw diameter: 35 mm • Screw length: 30 L/D • Drive power: 9.2 kW • Cooling tank: 6 m • Spool size: 0.5–5 kg (no downtime during change) _____ Condition • DEMO unit – directly from manufacturer • Excellent condition • Available immediately • Full factory warranty for 12 months FCA BOCO price: 158 850,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Year of construction: 2012, condition: used, This Macchi 3-layer blown film co-extrusion line is designed for the production of high-quality polyethylene films with outputs of up to 800 kg/h. The line processes LDPE, LLDPE, MLDPE, and HDPE and is suitable for manufacturing collation shrink film, gusseted shrouds, stretch hood film, tubing, and sheeting. Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3-layer blown film die head TE5303-IBC-350/500 Die diameter: 350 and 400 mm IBC Die gap: 1.8 mm Rcjdpfx Aozkru Eofhed Output: Up to 800 kg/hour, depending on the material formulation Air ring: Dual-flow air ring, carbon fiber Take-off: Take-off unit, 2400 mm wide Oscillating nip rollers Motorized side gusseting Rewinder: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reel diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide, E&L Gravimetric weight control system, Piovan/Doteco Component blender, Shini Dosing units, Doteco Automatic thickness control, Kundig K-Design profile gauge control system Calibrating basket Corona treater, Martignoni Air shafts, 8 pcs

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 Rcjdpfxszl Hz Ns Afhsd CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Redpfsy Exrpsx Afhjcd The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel Redpfx Afjkn Rz Hjhecd KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Make: Reifenhauser Model: Mirex-MT-V 1-RZE 120-1800 Year: 2016 Condition: Excellent Use: PET / PP / PS Foil or Sheet PET: Thickness Range: 0.25 - 2.2mm Output: 2,000 kg/h Max Sheet Width: 1600mm Rcedpfovbcbusx Afhsd Extruder: RZE 120mm Electrical Supply: 3 x 480V 60Hz with N Calendar Roll Width: 1800mm Calendar Roll Diameters: 450 / 700 / 700mm Silicon Bath Max Sheet Width: 1600mm Silicon Bath Sheet Thickness Range: 0.15 - 1.5mm 4 Position Winder WOB 1800 for double web winding included. All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system Rcsdpfjuac Ugjx Afhod - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

Year of construction: 2023, condition: new, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Rjdpfx Aoxr Hgxofhocd Year: 2023, never used, still in its original packaging.

Condition: used, Year of construction: 2009, 1250 MT PRESEZZI BRASS ROD OIL HYDRAULIC EXTRUSION PRESS LINE W/ OCN HANDLING MANUFACTURER - PRESEZZI YEAR - 2009 SERIAL NUMBER - 2671-2009 PRESS TONNAGE - 1250 MT WORKING PRESSURE - 260 BAR BILLET DIAMETER - 145MM BILLET LENGTH MAX - 650MM MAIN CYLINDER (SINGLE ACTING) WORKING PRESSURE - 260 BAR RAM DIAMETER - 760MM POWER - 1149 MT SIDE CYLINDERS (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM THRUST FORCE DURING EXTRUSION - 107 TON THRUST FORCE DURING RETURN - 65 TON TOTAL MAIN CYLINDER AND SIDE CYLINDER TRUST FORCE - 1256 TON CONTAINER MOVEMENT (DOUBLE ACTING) Rsdpezad Evsfx Afhjcd OEPRATING PRESSURE - 260 BAR BORE - 160MM ROD DIAMETER - 100MM SEALING FORCE AT 300 BAR - 107 TON OPENING FORCE AT 280 BAR - 65 TON SHEAR CYLINDER (DOUBLE ACTING) OPERATING PRESSURE - 260 BAR BORE - 100MM ROD DIAMETER - 70MM SHEARING FORCE - 20 TON ASCENDING FORCE - 10 TON HIGH PRESSURE REXROTH PUMP GROUP: MAIN PUMPS NUMBER OF PUMPS - 3 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A3VSO0500HSE/30R-PPH13N00 OPERATING PRESSURE - 260 BAR FLOW RATE - 500 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 200 KW PER PUMP AUXILLARY PUMPS NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO140DFR/31R-PPB-12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 140 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 55 KW PER PUMP PILOT PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A10VSO45 DFR/31-PPA12NOO OPERATING PRESSURE - 160 BAR FLOW RATE - 45 CM3/ROTATION PER PUMP ROTATION SPEED - 1500 RPM PER PUMP POWER - 18.5 KW PER PUMP CONTAINER PUMP NUMBER OF PUMPS - 1 MANUFACTURED - BOSCH REXROTH PUMP TYPE - A11VO40DR/10R-NPC12NOO OPERATING PRESSURE - 300 BAR FLOW RATE - 40 CM3/ROTATION PER PUMP ROTATION SPEED - 1000 RPM PER PUMP POWER - 15 KW PER PUMP MAIN PRESS LINE COMPONENTS / FEATURES COIM AUTOMATED BILLET FURNACE WITH INFEED TABLE BILLET LOADING STATION QUICK CHANGE DIE CHANGEOVER TABLE OCN SINGLE PULLER OCN WALKING BEAM COOLING TABLE OCN ENTRY FINISH SAW FEED TABLE OCN FINISH SAW OCN EXIT BUNDLING TABLE PRESEZZI OPERATORS DESK (LEFT HAND DIRECTION)

Year of construction: 2006, condition: used, functionality: fully functional, Complete Extrusion Line for Plastic Pipes Luigi Bandera / Graewe / Supertech Year of manufacture: 2006 For sale: Complete extrusion line for the production of plastic pipes. Installed in a mobile container setup = 3 x 40-foot sea container. (Walking Pipe system). Ideal for mobile production or limited space. Rcjdpfx Aszbkkhofhsd Specifications: Extruder: Luigi Bandera S.p.A. Year of manufacture: 2006 Serial number: 251371 / 251372 Downstream processing / cooling line: Supertech Industrie – Walking Pipe system Saw / cut-off unit: Graewe GmbH Type: RA 250/4 Year of manufacture: 1999 Control system: Krauss Maffei Installation: fully integrated in container (plug & play concept) Description: This robust extrusion line is suitable for the production of plastic pipes (PE/PP/PVC depending on configuration). The line consists of a powerful Bandera extruder, followed by a complete calibration, cooling and transport section (Walking Pipe), and a Graewe cut-off saw. Applications: Drainage pipes Cable protection pipes Industrial pipelines Irrigation systems 💬 Price on request 📍 Viewing possible by appointment; address = 7822 Ath, Belgium Keywords: Technical / industrial Extrusion machine Extrusion system Extrusion line Screw extruder Melt processing machine Plastic processing machine Pipe production machine Profile extrusion machine Continuous forming machine Melt and forming system

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Demonstration line, Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing Rcedpfx Afji Dtb Ashed > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: excellent (used), functionality: fully functional, machine/vehicle number: ZE60 A- Econ EUP 600, Stock- No.: 2858 1 used, partly overhauled and tested compounding-pelletizing line, consisting of: Berstorff ( Krauss Maffei ) compounding extruder i Type ZE 60 A - 34 L/D twin-screw co-rotating extruder Rcjdey At N Rspfx Afhjd Extruder drive 160 kW AC Degassing with vacuum pump Laser separating head / melt filter Eprotec Melt x10 melt pump ECON EUP 600 underwater pelletizing system, complete with Start-up polymer diverter valve incl. hydraulic Water system pellet spin-dryer / centrifuge Control boards with Siemens Touch panel >> 12-month PLASTICO warranty OPTIONAL at extra cost: Material conveying Gravimetric loss-in-weight dosing-blending Granule classification Pellet filling station for Big Bags or Octabins Start-up in your factory by our Technicians We have more complete compounding extruders, pelletizing systems, loss-in-weight gravimetric blenders & more in Stock. Visit us in D 42329 Wuppertal or send us your inquiry, you´re welcome.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. Redpfx Ajh Eyd Aofhscd 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Rsdpfx Aed Sg Hrsfhscd Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Rcsdpogbffvofx Afhsd Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Rcsdpfx Afowg R Rtohed