Used Soldering Bath for sale (500)

Year of construction: 1970, condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm Width: 200 mm Depth: 40 mm Solder capacity: 16 kg Power consumption: 2400 W For mains voltage: 220 V Hjdpfx Ahsb Nxf Ts Sent

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. Hsdpfx Aozmqv Hsh Sont It was operating 2-4 hours during test run. The whole system is in new state.

Condition: used, This listing is for the Grant GD120 Water Bath/Circulator The unit is in full working condition and is ready for immediate use The Grant GD120 is a digitally controlled stirred water bath and circulator ideal for laboratory use, offering high precision and flexibility. Here's a breakdown of its features and capabilities: Key Features Immersion Thermostat with Intelligent Control Optimisation (ICO): Enables adaptive PID control for exceptionally stable temperature regulation. Integral Pump: Built-in circulation pump with a maximum flow rate of 17 L/min, allowing both sample immersion and external fluid circulation. User Interface: Equipped with a clear digital display, a rotor plus two-key control, timer function for reaction timing, and visual + audible alarms to notify operators of critical conditions. Preset Temperature Control: Supports one adjustable operating setpoint plus three preset temperature options for fast switching. Safety Features: Includes float-switch low liquid protection and an adjustable over-temperature cut-out for sample and user safety. Liquid Type Selection: Automatically adjusts heater power and temperature parameters depending on chosen liquid (e.g., water, oil, glycol mixtures). Hedpfx Ajxhfl Ejh Sont Temperature Range & Accuracy Plastic Tanks (P-series): From around ambient +5 °C up to ~99 °C. Stainless Steel Tanks (S-series): From –15 °C up to ~120 °C. High Stability: ±0.02 °C for stable temperature control. Technical Specifications & Obsolescence The GD120 series includes multiple tank sizes: plastic tanks (P5, P12, P18) and stainless steel tanks (S5, S12, S18, S26, S38), offering varied capacities for different lab needs. This series is now considered obsolete, though it remains functional and reliable for many applications. Supporting Documentation & Manual Operating Manual: The GD120 is covered by the general purpose stirred thermostatic baths manual (shared with GD100), outlining temperature settings, calibration procedures, safety guidance, and maintenance. Datasheet Summary: Positioned within the broader Grant Optima product range, the GD120 sits between simpler (GD100, up to 100 °C) and higher-spec models (GR150 up to 150 °C, GP200 up to 200 °C)

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Hjdpfxszmap Aj Ah Sjnt Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Profile Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available Hnedpoqcu Acjfx Ah Set

Condition: used, Grant Aqua 5 Water BathThe Grant Sub Aqua 5 Plus is a digital, unstirred water bath designed for precise temperature control in laboratory applications. It is part of the SUB Aqua Pro series, known for its high-quality construction and reliability.​ Key Specifications Temperature Range: +5°C to 99°C Temperature Stability: ±0.2°C Capacity: 5 liters Internal Dimensions: 281 x 131 x 132 mm External Dimensions: 335 x 215 x 200 mm Heating Power: 0.35 kW Material: High-grade stainless steel tank Display: Digital with PID control for quick heat-up and precision Additional Features: Three programmable temperature presets Countdown timer with audible buzzer Front panel lock-out User-settable sample protection and fixed thermal cut-out Gable polycarbonate lid included​ This model is suitable for applications requiring stable and precise temperature control, such as sample incubation, enzyme reactions, and media preparation. Hnedpfjxv Ayvex Ah Sjt

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 12 276 / REV 13 976, power: 30 kW (40.79 HP), overpressure (max.): 0.5 bar, tank capacity: 110 l, No minimum price – guaranteed sale to the highest bidder! The distillation unit underwent an overhaul in 2024. TECHNICAL DETAILS Capacity: 110 l Water jacket volume: 180 l Operating overpressure: 0.5 bar Heating method: Electric heating elements Hjdpfx Aszzmk Aoh Sent MACHINE DETAILS Machine type: Column still with water jacket Power: 30 kW

Condition: used, Year of construction: 2016, The DT-250 series is a hot-bar/ACF bonding machine, intended for connecting flexible circuits, PCBs, and displays, among other applications. The DT-250 features a manually operated 2-position front/rear slide with approximately 200 mm of travel. Manufacturer: Unitek Eapro B.V., Helmond, Netherlands Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Type: ACF DT-250-GH Serial number: 0620905 Year of manufacture: 2006 Power supply: 230 V Current: 6.3 A Phase: 1-phase CE marking Property Specification Type DT-250 Technology Pulsed Heat / Hot Bar Application ACF bonding / heat-seal bonding / reflow Slide Manual, 2 positions Travel 200 mm Hjdpfx Ahozzau Uj Sont Bonding head SH500 Maximum force 30–500 N Pneumatic operation Yes Air pressure 4–8 bar Thermode temperature up to approx. 600 °C Temperature control Uniflow pulsed heat Workpiece/fixture up to approx. 160 × 160 mm

Condition: like new (used), Year of construction: 2026, functionality: fully functional, The SW-320 is a good competitor for small-batch selective wave soldering machines. It is the most affordable machine and features a very modern programming method using a camera, drawings, and image importing. Hodezzdhfepfx Ah Sent Easy maintenance, with nozzles that can be easily exchanged via a magnetic connection. SW-320YT L*W: 50×50～320×250 mm Substrate thickness: 0.8～3 mm Pin length:

Condition: used, functionality: fully functional, For sale is a Versaflow 3/45 selective soldering machine manufactured by ERSA. Serial number: S011B-15G0525 Dimensions: 5.70 x 1.69 x 1.66 Weight: 2300 kg Note: Width adjustment is not possible (the transport width has been fixed to the frame width). Hnjdezzldbepfx Ah Sst Price upon request.

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors Hedozlx E Tspfx Ah Sjnt

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Hnodpfx Ahjzwpgls Sst

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Hsdpeya H Uyefx Ah Ssnt

Year of construction: 2012, condition: used, Two identical reflow soldering ovens with different years of manufacture (2008/2012) are offered. Working width: 45mm-516mm, clear passage height top/bottom: 35mm/37mm, max. conveyor speed: 2m/min, drive: pin chain conveyor, heated/cooled process zone: 3725mm/1115mm, heating cassettes: 20, control: PLC. Machine dimensions X/Y/Z: approx. 6265mm/1201mm/1375mm, weight: approx. 1900kg. Inspection possible by arrangement. Hjdpfozvv Itex Ah Sjnt

Condition: used, Year of construction: 2011, SMC Deutschland GmbH Temperature Control Bath, Water Cooled, INR 244 713D Model: INR244713D Condition: Used Technical Specifications: Thermo-Con 220-230VAC 50/60Hz General Information: Hnodpfjx I Al Ejx Ah Set SMC Thermo-Con Temperature Control Unit (TCU), removed from ASML Yieldstar S-200B. Cooling/temperature regulation (MCW/PCW) for optics, electronics, sensor applications ASML 4022.639.27493

Year of construction: 2015, condition: ready for operation (used), Three Rehm reflow soldering ovens for the printed circuit board industry are available. 1) 2x Rehm VXC basic 2450 Type 523, year of manufacture: 2015, power: 45kW, exhaust air: 1000m³/h, preheating zones: 5, peak zones: 2, cooling zones: 3, total process zone length: 2100mm, throughput capacity: approx. 100printed circuit boards/h, length: approx. 5000mm. 2) Rehm VXC basic 2100 Type 422, year of manufacture: 2014, power: 40kW, exhaust air: 1000m³/h, preheating zones: 4, peak zones: 2, cooling zones: 2, total process zone length: 2450mm, throughput capacity: approx. 115printed circuit boards/h, length: approx. 4300mm. The systems were thoroughly cleaned and serviced in December 2025. Documentation available. An on-site inspection is possible. Expected to be available from August 2026. Hedpfxezghf Eo Ah Sont

Condition: used, Year of construction: 2018, Configuration: Single Track Multi Busbar, voltage: 380VAC 3P/N/PE/50Hz, power: 15kW, compressed air: 0.6MPa, machine dimensions X/Y/Z: approx. 7000mm/2050mm/2370mm. The stringer is currently retrofitted for TECC-Connect and can be converted back to the soldering process. The machine is fully functional and ready for operation. Documentation available. Inspection possible by arrangement. Hsdpfxez A Ei Rj Ah Sjnt

Condition: used, Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55 2Mdolue S021B-23A0548D, used, 2023, price: €190,000 (conveyor not included) Hsdpfxsx Tgvlj Ah Ssnt Specifications available on request.

Condition: used, Year of construction: 2005, functionality: fully functional, Gas-heated salt bath oven Maximum temperature 1200 °C Hedpju S Ictsfx Ah Sjnt Power: 180KW Gas heating You are welcome to come by for a viewing by appointment.

Year of construction: 2013, operating hours: 3,649 h, condition: used, Machine is in working condition and maintained according to schedule. Hnjdpfxozvcg Nj Ah Sst 1 fluxer and 6 pots. Will be available in coming weeks. Ask for additional information and quote!

Condition: good (used), Year of construction: 2007, ASSCON Systemtechnik VP1000-56 * PCB size: 500 × 600 mm * Maximum component height: 50 mm * Machine weight: 400 kg * Supply voltage: 400 V / 50 Hz (3/N/PE) * Connected power: 10 kW * Average power consumption: 3.5 kW * Standby power consumption: 1.9 kW * Compressed air supply: 5 bar, oil-free compressed air * Media consumption: approx. 2.5 m³/h * Galden® filling volume: 20–25 kg * Heat-up time: approx. 25 min Hnedjzqcmfopfx Ah Sst * Machine dimensions (L × W × H): 1,430 × 1,385 × 1,350 mm * Loading/unloading height: 920 ± 20 mm * Cooling: Air/convection, open or closed cooling water circuit possible

Condition: used, functionality: fully functional, We are offering a 20FT sanitary container, available for pickup in Meppen. ✅ CONTAINER TYPE: Sanitary container ✅ DELIVERY CONDITION: Used, watertight 2 units of toilets including toilet paper holders 2 units of urinals with flush valves Hnodpfjz Apnmsx Ah Set 5 units of hand wash basins 1 unit of shower with curtain 1 unit of water heater The container is sold in used condition and may have defects, impurities, color variations, rust, etc. ✅ DIMENSIONS L x W x H: 6058 x 2438 x 2800, interior height 2500 mm. ✅ TRANSPORT: Please provide us with your postal code so that we can prepare a free and non-binding offer for the container, including delivery and, if necessary, unloading from the truck. ✅ VARIETY: In addition, you will find a wide range of sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) and for every need. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Year of construction: 2022, condition: used, Frame is from 2012 and machine fully rebuilt in 2022 by ERSA OEM. 1x fluxing module 1 drop jet flux head 180µm 3x preheating modules bottom IR lamps and top side convection Hnjdpjy Uihtofx Ah Sst 2x solder modules multi wave (dip modules) one standard size and one XL with electromagnetic solder pump No traceability system installed New conveyors retrofitted with heavy load chain system Ask for the full overview of the rebuild and its condition!

Condition: used, Year of construction: 2009, Offered here is a soldering robot from ATN Berlin. This is the "Vario" model. Component feeding is realized via exchangeable cassettes. The soldering process uses induction, making it a contactless soldering method. Hnjdpfxoy Slkfo Ah Sot

Condition: new, functionality: fully functional, BULK LOT – tesa NOOBLESSE Bathroom Accessories Set – Retail Value €1,350,000 For sale is a bulk lot consisting of approximately 22,500 bathroom accessory items from the tesa NOOBLESSE range. This offer is ideal for wholesalers, resellers, retailers and larger projects. The lot includes eight different products with a total retail value of approximately €1.35 million. * Easy installation without drilling thanks to the patented tesa Power Kit mounting system * No damage to walls or tiles – also ideal for rented properties * Strong hold and high load capacity – suitable for tiles, glass, metal, marble, wood and many plastics Hnodpfx Ahjznk H Ie Sst * Removable without leaving residue – the accessories can be detached when required * High-quality materials – brushed stainless steel combined with satin-finished glass, rust-resistant and durable * Timeless and elegant design – modern appearance suitable for a wide range of bathroom interiors * Wide product selection – accessories for towels, soap, toilet paper and more * Sustainable solution – reusable mounting system with separately available adhesive kits ## Products Included in the Lot * tesa NOOBLESSE double towel holder 40481 – approximately 6,200 units * tesa NOOBLESSE soap dispenser 40487 – approximately 700 units * tesa NOOBLESSE toilet brush 40480 – approximately 2,300 units * tesa NOOBLESSE towel rail 40484 – approximately 2,000 units * tesa NOOBLESSE toothbrush tumbler 40488 – approximately 3,600 units * tesa NOOBLESSE towel rail 40485 – approximately 3,400 units * tesa NOOBLESSE toilet paper holder 40479 – approximately 2,000 units * tesa NOOBLESSE towel holder 40303 – approximately 2,000 units The complete stock, including the respective quantities, is listed in the images. The purchase of individual partial quantities is also possible. Additional pictures and videos are available upon request. Now is the right time to expand your product range. Secure this exclusive wholesale offer of tesa NOOBLESSE bathroom accessories while stocks last. Contact us today for further information. Benefit from a strong brand, increase your sales and offer your customers high-quality solutions for modern bathroom design with tesa NOOBLESSE.