Used Stahl High Voltage Test Device for sale (44,454)

Condition: used, Available quantity: 4 units “Removed from a production facility of an automotive supplier, professionally dismantled” Designation: DC high-voltage/insulation test module GH-200.11A Manufacturer: STAHL Prüftechnik Dcjdpjzg Ihgjfx Ai Sjn Application: Checking and determining voltage and insulation strength Technical data: - Test voltage (setpoint specification): 100 ... 7500 V DC - Control deviation/measurement accuracy: 0.1 % ± 2 V of the setpoint - Rise rate (ramp): 50 V/s - 30 kV/s - Discharge internal resistance: 100 MΩ - Measurement range: 0 ... 7500 V DC - Output isolation: ± 1500 V max. voltage difference between HV 0 output and PE connection - Trigger current: 1 µA ... 10 mA - Measurement ranges: - Range 1: 0 ... 10 mA - Range 2: 0 ... 200 µA - Resolution: 1 nA - Measurement uncertainty: - Range 1 (10 µA to 10 mA): < 0.5 % of the measured value ± 0.5 µA - Range 2 (0.5 µA to 200 µA): < 1.0 % of the measured value ± 0.01 µA - Discharge energy: < 350 mJ Interfaces: - Ethernet (Modbus protocol) - Optional: Profinet, EtherCAT - Optional: 2-channel safety circuit Special features: - Safety current limited to 10 mA - Precise insulation measurements in the GΩ range through guard connection - Compact industrial design for installation in automated testing applications - Voltage supply with wide-range input

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Dodpfxsd Dc Uno Ai Secn Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Safety Tester for High Voltage Test Station - EATON Sefelec 506-S The device was purchased in 2023 and is in excellent condition. The SEFELEC 506-S test device for electrical safety testing, an EATON next-generation model, is based on ARM dual-core technology components and is DSP-controlled. This technology offers the operator optimal stability and repeatability of measurements. The high precision and measurement speed are tailored to meet the requirements of quality assurance in production and incoming goods inspection. The sequence function facilitates the operation of the SEFELEC 506-S test station when integrated into a test stand or test bench. The new SEFELEC model series features a 7" touchscreen that impresses with its simple and intuitive operation. - Standard interfaces: Ethernet / RS232 / USB / PLC - Optional: IEEE488-2 interface - Dual safety circuit SIL2 - Automatic selection of test series - Sequence mode for combining multiple consecutive tests Withstand voltage at 5kVAC 500VA and 6kVDC Detection modes by current threshold or current fluctuations (ΔI) Burn function mode without current detection Megohmmeter 200 GΩ, test voltage from 20 VDC up to 1000 VDC Optional: 2TΩ range PE testing at 32A - 8VAC, measurement 0 ... 1Ω Optional: testing current 50A Programmable test ramps Ramp up, hold, ramp down Multi-ramp mode, up to 7 steps Dodjxqxt Iopfx Ai Sjcn TFT touchscreen 7", 16 million colors, for programming and display of current tests and results Integrated ARM Dual Core Control & 3D NAND technology for optimal precision, stability, and repeatability Integrated DSP for higher test speeds Large internal memory for storing configurations and test results Fully compliant with IEC 61010-2-034 (Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2: Particular requirements for testing and measuring circuits for insulation resistance and dielectric strength) Shipping is possible upon arrangement. #8312-1

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Dcedpfx Aozl H Hxji Son Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: used, “functionally tested; item originates from the dismantling of equipment at an automotive supplier” Quantity: 5 available Manufacturer: Stahl Prüftechnik Type: FR-110.01A Function: Testing device for functional and process monitoring in industrial applications Power supply: 230 V AC Display: LED / Digital display Housing: Metal Application: Quality assurance, leak testing, process control Dcodpfx Aiozh A D Eo Ssn

Condition: excellent (used), Atlas Ci3000+ Xenon Weather-Ometer Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Model: Ci3000+ Weather-Ometer Machine Type: Xenon Weather-Ometer / Weathering Test Device For sale is a used Atlas Ci3000+ Xenon Weather-Ometer. The device is suitable for artificial weathering, light aging, material testing, quality control, as well as aging tests of plastics, paints, coatings, textiles, and materials. Technical Data Light Source: Xenon Arc Lamp Lamp Rated Power: 4,500 W Xenon Lamp Operating Range: 1,700 - 4,500 W Device Model as Displayed: Ci3000+ W Sample Sensor 1: Black Standard Sample Sensor 2: Black Panel Light Sensor 1: CI 300 - 400 nm Light Sensor 2: CI 420 nm Power Connection: 220 / 380 V Frequency: 50 Hz Connection Type: 3/N/PE Rated Current: 50 A Power Consumption: 9.5 kW Control Voltage: 24 VDC Compressed Air Supply Required Operating Pressure: 80 - 100 PSI / 552 - 689 kPa Compressed Air Consumption: approx. 4 CFM / 0.11 m³/min Dimensions approx.: 950 x 730 x 1,830 mm (W x D x H) Required Footprint approx.: 1,050 x 2,030 mm (W x D) Weight approx.: 404 kg Minimum Distance Exhaust Hood: approx. 102 - 152 mm Operating Data Equipment Touchscreen Control Panel Xenon Burner Test Chamber with Sample Basket Black Standard Sensor Black Panel Sensor CI 300 - 400 nm Light Sensor CI 420 nm Light Sensor Water-Cooled Lamp System Exhaust Connection Dedpfezf D Rnox Ai Socn Interface Connections Integrated Humidification System Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Existing Documentation as Shown in Pictures Existing Accessories as Shown in Pictures Areas of Application Artificial Weathering Light Aging Test UV and Xenon Testing Material Testing Plastic Testing Paint and Coating Testing Textile Testing Automotive Industry Quality Assurance Research and Development Scope of Supply Atlas Ci3000+ Xenon Weather-Ometer Existing Accessories as Shown in Pictures Existing Documentation as Shown in Pictures Condition Used Good Optical Condition Optical Condition as Shown in Pictures Inspection possible by appointment. Scope of supply as shown in the pictures. Subject to changes and errors in technical data as well as prior sale.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 Dodpfx Ajz D S Ezsi Secn The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Djdpfx Asf Axn Aji Sjcn Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: used, Quantity: 2 units available Functionally tested; item originates from the dismantling of equipment belonging to an automotive supplier. Dcedpezmm Ixefx Ai Ssn Manufacturer: SPS electronic Type: RL42-L Function: High-voltage relay for insulation and dielectric strength testing Switching voltage: up to 5 kV DC Switching current: up to 10 mA Coil voltage: 24 V DC Application: High-voltage test equipment, safety circuits

Year of construction: 2020, condition: like new (used), functionality: fully functional, MED-CONT MODULAR SYSTEM Originally custom-built for medical device manufacturing, the MED-CONT Modular System is a turnkey, relocatable modular technical facility offering approximately 100 m² of high-quality laboratory, production and office space. The system is ideally suited for: Djdpfxjznmvre Ai Sjcn Medical device manufacturing Biotechnology and life science companies Electronics manufacturing and assembly Research & Development (R&D) centres Universities and research institutes Start-ups and scale-up companies Pilot production and prototyping Quality control and testing laboratories Pharmaceutical manufacturing support Clean assembly and light manufacturing Contract manufacturing (CMO/CDMO) Engineering and automation companies Humanitarian and disaster response projects Military medical and technical field operations Mobile laboratories and temporary technical facilities The system comprises three 40' High Cube CARU ISO technical containers and one 20' office/administration container, providing a fully integrated and relocatable working environment that can be deployed wherever high-quality technical space is required. Key Features Approx. 100 m² modular technical facility 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Fully insulated construction Heating and air conditioning (HVAC) 220 V / 380 V EU electrical installation High-quality LED lighting Ethernet network infrastructure Indoor-stored, outdoor-deployable Modular configuration – containers can be connected or operated individually Built in 2020 Excellent condition Fully functional Typical Applications Medical device manufacturing Electronics assembly Laboratory operations Pharmaceutical applications Research & Development Pilot production Start-up manufacturing Quality control laboratories Corporate innovation centres Technical training facilities Mobile production facilities Mobile technical support centres Humanitarian and disaster response projects Military field laboratories Office Container The integrated office container provides a comfortable administrative workspace featuring: Office area for up to four workstations Meeting table for 5–6 people Heating, cooling and Ethernet network connection Ideal for administration, engineering, project management and customer reception Included in the Sale The sale includes the complete MED-CONT Modular System, consisting of: 3 × 40' High Cube CARU ISO technical containers 1 × 20' office / administration container Additional laboratory, production and utility equipment is available by separate negotiation. Business Advantage The MED-CONT Modular System represents a cost-effective alternative to constructing or refurbishing conventional laboratory and technical facilities. It enables organizations to establish high-quality laboratory, production and office space within a fraction of the time required for traditional construction, while maintaining the flexibility to relocate or expand the facility as operational needs evolve.

Condition: excellent (used), Here we offer you a weathering test device. Dodpfxjzdtkue Ai Sjcn Heraeus Atlas Xenotest BETA – a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV drive Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Sample chamber temperature up to 80°C, regulated Measurement sensor on sample level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Sample chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electronic version: 3/N/PE AC 400V ± 10 % 50-60 Hz Power connection: 32A Power consumption: approx. 12 kVA Rated power of the xenon lamp: 2200 VA Power of the xenon lamp: 2800 VA Rated current: 16A Lamp current max.: 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum sample area: 4000 cm² Weight: approx. 400 kg Type: Heraeus Atlas Xenotest BETA LM Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Universal testing machine for material testing / material analysis Testing of tensile strength, bond tensile strength, and shear strength of masonry and wood connections, etc. - Nail pull-out test - Compression test on cement and mortar prisms - Bending test on cement and mortar specimens - Compaction test - Bending test on wood and concrete - Shear strength test on wood - Splitting test on wood - Scaffolding connection test - Shear strength test on walls - Tensile test on walls - Tensile test on structural steel - Tensile test on wood Dcedpoxmv H Refx Ai Son - Pull-out test on structural steel - Reversal bending test on structural steel - Anchor pull-out test - Bond tensile test I have made a video demonstrating the function of the testing machine. I can send this video to a mobile number via WhatsApp or Signal! Shipping and loading are possible at my warehouse!

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Canon High Capacity Stacker H1/J1” finishing machine Dcedpfx Aoz Ixzqji Ssn Item for sale: 1 x Canon High Capacity Stacker H1/J1 Condition: This offer is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Compatible with various Canon imagePRESS models, including the C650/C750/C850, C710/C810/C910 and C8000VP/C10000VP. The device has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sturdy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Dsdszg Er Aepfx Ai Sscn Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. Dcodpfx Aioy Aggcs Sen The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. 📸 Included: device as shown in the pictures

Condition: good (used), Resato HBU-B160 Gas High-Pressure Workshop Testing System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of the facilities to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure tests guarantee the quality and safety of components used in oil and gas extraction. By injecting a chemical fluid, the well is stimulated. With the controller, high-pressure systems control and regulate counter-pressure and fluids. In this way, oil and gas can be extracted more safely. Dcsdpfor Hmihsx Ai Ssn Manufacturer: Resato HBU testing system Type: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc Max. pressure: 7 bar 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing You can find more new and used items in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Reicherter Wolpert Hardness Testing Machine / Hardness Tester Manufacturer: Reicherter Model: Briro VA II Test Loads: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat Depth: 150 mm Dodpfxjx U Tlvo Ai Socn Test Area Height: 300 mm Brinell (ISO 6506): 5 / 10 / 15.625 / 30 / 31.25 / 62.5 / 187.5 / 250 Vickers (ISO 6507): 5 / 10 / 20 / 30 / 40 / 50 / 125 Accessories: See photos for details You are welcome to come for an inspection. We can arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. Requirement: a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are the property of their respective owners and are used only for identification and description purposes. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2007, Stiefelmayer Brivisor KL-4 Hardness Testing Machine Testing height: 150 mm (with testing table) Outreach: 200 mm Device footprint: 560 mm x 250 mm x 770 mm (W x D x H) Load range: 0.05 - 10 kgf Weight: approx. 45 kg Dcedpfx Aiezzynho Son Year of manufacture: 2007 Vickers: HV 0.1 | 0.3 | 0.5 | 1 | 2 | 3 | 5 | 10 Brinell: HBW 1/5 and HBW 1/10 You are welcome to visit us for an inspection. We can also arrange cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data as well as errors in the description of the article may occur and are subject to change.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Dedpfx Aezh D S Rji Socn Temperature range for preheating +5°C to +40°C Temperature change duration Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Liebisch Type: S 1000 A-TR / 42016211 Chamber-type testing equipment with a 1000-liter test chamber volume for salt spray tests. Constamatic® TR Dedezh Ht Rspfx Ai Sscn This series includes automatically controlled chamber-type testing equipment of type A-TR. The internal device control is operated via a touchscreen. All functions are displayed on a touchscreen with intuitive user guidance. Technical data: Device type: S 1000 A-TR External dimensions of the housing: (W x D x H in mm) 2600 x 1120 x 1210 Internal dimensions of the test chamber: (W x D x H in mm) 1535/1425 x 800/780 x 660/650 Max. load of the sample holder: 10 kg / shelf 10 kg Operating voltage: 230 V +6/-10% Connected load S: 2700 W Control range for humidification S: up to 70°C Control range for test chamber K: up to 50°C Control range for test chamber S: up to 50°C Frequency: 50/60 Hz Device fuse: 12 A Temperature control: PLC Over-temperature protection: yes Volume of test chamber: 1000 liters Stock of test solution: approx. 150 liters Test solution consumption / hour: approx. 0.7 – 1.0 liters Water filling of the base pan: 15 liters Weight: 450 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: ready for operation (used), CV Instruments THR-700E Hardness Tester Rockwell Digital Hardness Tester Test Force: 98.07 N (10 kgf) Test Force/Load: 588.4 N (60 kgf), 980.7 N (100 kgf), 1471 N (150 kgf) Maximum Height: 170 mm Maximum Depth: 165 mm Dimensions: approx. 215 mm x 500 mm x 750 mm (W x D x H) Weight: approx. 85 kg You are welcome to arrange an inspection. Dcodpfx Aijytn Hko Son We can also organize a cost-effective shipping solution for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop to see more of our offerings. Brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical specifications and errors in the article description are possible and subject to change.

Condition: used, “functionally tested; item comes from the dismantling of equipment at an automotive supplier” Quantity: 9 available Dodpszhn A Hsfx Ai Sscn

Condition: good (used), High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor Dedpfxovvmn Uo Ai Socn -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 220 V, oil tank capacity: 5 l, machine/vehicle number: GDI-6000, Equipment: CE marking, It features a specially designed ergonomic structure. (The cabinet section also serves as a cargo carrying box.) Aluminum body, test rail, and bottle holder; flexible, custom test tubes resistant to hot and cold weather conditions, 6X150 (mg). From 1 injector to 6 injectors, with easy-to-connect fittings, injectors can be connected in a short time. Thanks to the injector drip reservoir, you can perform detailed spray pattern detection. Each test lasts a maximum of 90 seconds. With a 200 bar system (Electronic Measurement) specially designed for the GDI-6000, pressures are measured clearly. The GDI-6000 reaches a maximum of 200 bar. Thanks to this pressure, drip tests can be observed very clearly. With the ability to print receipts, you can provide test results to service centers and organizations that require them. Thanks to the DATABASE, the (mg) values that more than 6000 different types of injectors should deliver can be seen on the 7.0-inch touch screen. Thanks to the NEW-ENJ+ MODE, you can create and save injectors and injection parameters that are not found in the DATABASE. Thanks to the OHM-TEST MODE, you can measure the injector (OHM test) values. AUTO-1: Low speed (4000 RPM) AUTO-2: Medium speed (5000 RPM) AUTO-3: High speed (7000 RPM) Dcsdez D H Dfjpfx Ai Son DRIP TEST: Thanks to the Leaking Out mode, you can perform injector drip (leakage) tests clearly under pressure. Thanks to the MANUAL MODE, you can perform the desired RPM, PULSE, and TIMER tests with the RPM+ PULSE+ and TIMER+ settings.

Condition: good (used), High-voltage system, high-current system, high-voltage system, transformer -Manufacturer: Himmel, high-voltage system, high-current system -Type designations: Sky HG 64-25 KTSHigh frequency: 0.7 MHz Dcedpfx Aispy Rx Ne Ssn -Rated power: 25 kW -Individual components/technical data: see photos, nameplate -Dimensions: 1605/880/H1840 mm -Weight: 830 kg