Used Stas 13.50 Biostar Mit Vbk E-Powerplans 93M³ for sale (75,225)

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Ncedeyh S Aiopfx Akfer Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Ncodpfjgcw Rmex Akfor Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Ncjdpfxofi Nmwo Akfer Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama tarpaulin 900g -10 mm floor -V-plates 2000x1500x4 -Service door on the front wall -12 pairs of lashing eyes in the front wall Njdpfxofi Nmps Akfocr Chassis: Reinforced version with continuous chassis, new structure manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version Axle and suspension "disc brake 22.5" Jost axle units version, 3*9 tons with DCA - air suspension, lifting and lowering, Wabco Smartboard, electronic brake wear system BVA, 1st axle with traction aid (without tractor unit equipment) Tires and wheels 6 wheels with tires of size 385/65 R 22.5 premium tires Ww. on steel rims, 11, 75*22.5 ET 120 Seat post mech. Support winches, 2x20 ton support load Braking system EBS E-system Wabco with RSS system (Roll Stability Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear Electrical system According to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear end, 24 volt system with 1*15-pin and 2*7-pin socket, with side outline lights in LED design 2 separate LED reversing lights integrated in the U-protection, Structure/trough: "structure fully welded inside" reinforced side walls Aluminum trough, side walls 30 mm thick ALU plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, ALU front wall with 600 mm plank profile 2-3 mm thick in straight design, with 2 ALU wing doors 50/30 mm thick, running residual emptying wall with Kevlar tarpaulin approx. 1,500 mm long plus side with Kevlar ? plan seal Hydraulic system: ?Cargo ? Floor? sliding floor system Sliding floor system in the floor with hydraulically moved ALU ? profiles on ALU ? Square profiles with approx. 880 PE-HD sliders, type CF 8 mm floor version, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, operating pressure 190 - max. 240 bar, ALU end pieces welded into the moving floor, without hydraulic hoses Accessories: 6 PVC fenders with 2 anti-spray mud flaps, 1 ALU E wheel holder, side aluminum collision protection in foldable version, 1 tool box approx. 860*460*400 mm in plastic, 3.7 m aluminum ladder, roll-up tarpaulin approx. 660gr./m2 with roll-up tarpaulin system including roll-up slats if required with side. Tension belts or with quick release, walkway on the front wall with access, 3 steel bows with locking mechanism that can be swung out and locked, aluminum protective cover with hinges that can be folded down for lighting, etc... +590¤ transfer costs Empty weight: approx. 7,700 kg Offer and images subject to change

Condition: used, axle configuration: 3 axles, first registration: 09/2017, loading space length: 10,550 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 50 m³, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-beam longitudinal members with welded cross members. Chassis width approx. 1,600 mm Axles and Suspension Disc brake 430 mm "Off Road Version" SAF-Intradisc axle assemblies 3 x 9 t with SAF air suspension, air bellows centrally arranged to the chassis longitudinal member, 1st axle liftable with start-up aid and manual forced lowering, Smart Board info center, lift-lower valve, 3rd axle with electro-hydraulically lockable trailing steering axle, Njdpjxf Sn Iefx Akfscr Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 approx. 40-50% remaining tread with Alcoa aluminum rims "satin" 11.75 x 22.5 ET 120, UNI-wheel bolts for aluminum rims Landing Legs Mechanical version with one-sided operation in 2 speeds with swivel foot for air suspension, 2x20t support load Brake System According to E.C. standard, two-line system Wabco, spring-actuated parking brake acting on two axles and Wabco EBS-E incl. RSS (Roll Stability System), Wabco Smartboard info center, aluminum air tank system Electrical System According to STVZO regulations with 2 five-chamber lights type Aspöck Ecopoint 2, 24-volt system with 2x7 and 1x15-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, All air and electrical lines are cleanly routed in plastic pipes! Tipper Body/Container body fully welded inside Aluminum tipping body, side walls 30 mm thick plank profiles (2-3 mm), 600 mm wide welded, floor 8 mm thick high-wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced, straight design, rear wall as double-wing door in straight version with 2 wing doors 1/2-1/2 design, each with a grain hatch, air vibrator under the floor with pneumatic control, rear bow in aluminum can be swivelled, two hold-down devices with rubber buffers attached to the tipper body at the front wall, Hydraulic System Tipping cylinder with "Cardan" mounting, 7,630 mm stroke Hydraulic cylinder mounted on front wall with operating pressure 220 bar, brand Hyva, 220 bar with approx. 2.5 m hydraulic hose and loose half 1", tipping angle approx. 48 degrees Accessories 6 Parlok mudguards, complete spray flap across the full vehicle width attached to the underrun protection, ALU spare wheel holder, foldable side underrun protection on the right, large toolbox type 860, approx. 3 m aluminum ladder, 3 centrally raised aluminum swing hoops approx. 150 mm higher, roll tarp with central light strip and separate reinforcements in the wear areas approx. 660 g/m² quality with roll tarp system, all-round rubber rope at the rear end of the tarp with two hooks to attach to the rear swing hoop, catwalk on container body with access on the left, tarp closure on the side with tension belts, rear tarp closure with welded-in rubber rope to prevent water ingress, robust foldable underrun guard in aluminum with two towing eyes left and right incl. fastening bolts, 2 "Clear-Pass" spray flaps on mudguards according to EC standard, etc. Offer and images subject to confirmation.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Ncjdpfx Ajxplxzekfer Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: like new (used), first registration: 12/2023, Year of construction: 2023, operating hours: 160 h, Hydraulic oil cooler Ncedpfx Asx Tn Upekfer High-performance hose protection LED light on boom Quick coupler MS01 Standard equipment of the machine, width: 710 mm / 1,100 mm extended 180 mm rubber tracks Double-acting auxiliary hydraulics Two travel speeds CE certification This offer is non-binding; no guarantee for equipment details. Subject to errors, changes, and prior sale!

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 906 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female Ncodpfx Akoy Dmu Nsfor * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2019, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,160 mm, color: grey, Year of construction: 2019, Axle configuration Tyre size: 385/65R22.5 Axle brand: JOST Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Rear axle 2: Max. axle load: 9,000 kg; Left tyre tread: 80%; Right tyre tread: 80% Rear axle 3: Max. axle load: 9,000 kg; Left tyre tread: 50%; Right tyre tread: 50% Weights Unladen weight: 7,440 kg Payload: 34,560 kg Nodpfx Aex Trmijkfocr Gross vehicle weight (GVW): 42,000 kg Maintenance APK (roadworthiness inspection): valid until 09/2026 Identification Registration number: OR-26-YP Further information Please contact Bob Beukers for more information.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Njdpfx Aoykuhcekfjcr Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) Ncjdpfx Akeykud Djfer F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: ready for operation (used), Siemens 6RB2030-0FA01 Simodrive power module, E version as per photo, SN ST-00R874393, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, delivery scope as shown in photos. Nedpfx Aoxagxdekfscr

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Nsdpfegcw Rijx Akfscr Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, Production orientation: Vertical Conveying system: Infeed and outfeed optional and dependent on product Film feed: Rear Forming shoulder: Fixed Operator display: Touchscreen with memory function Drives & controls: 3 servo motors and PLC control system Packaging length: 50–190 mm Packaging width: 50–150 mm (depending on film width) Packaging height: Dependent on forming shoulder Speed: 15–30 bags/min, depending on material, pack size, and product Film width: 110–320 mm Power consumption: Approx. 4.6 kW Machine material: “304 stainless steel with surface treatment” Printer bracket: Suitable TTO or ink wheel printer optionally available at extra charge Delivery time: Current lead time under 10 weeks Z-conveyor system: €8,500 Features: Stainless steel configuration, suitable for the food industry • Application for granules and small parts such as screws • Sectors: Pet food, food (coffee, nuts), metal industry • Simple touchscreen operation with color icons • Safety protection covers • Can be integrated upstream/downstream with other machines Ncedpfx Akoq Ikhaofjr • Customer-specific modifications/designs on request • 12-head scale integrated, hopper 0.8L Additional options (on request and at extra cost): • Euro hole punch etc. Production orientation: vertical

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 500 kg, The machine was purchased during a company liquidation. Flowpack Machine ITALDIBIPACK Dibiflow 500 – Year of Manufacture 2021 – Excellent Condition For sale is a high-quality flowpack packaging machine from ITALDIBIPACK, model Dibiflow 500, year of manufacture 2021. The machine is in excellent, well-maintained condition and is ideal for the efficient packaging of various products in tubular bags. Technical Data Manufacturer: ITALDIBIPACK S.p.A. Model: Dibiflow 500 Year of manufacture: 2021 Power connection: 400V – 3Ph + PE + N – 50/60 Hz Power: 4.3 kW Weight: approx. 500 kg Features & Equipment • Robust stainless steel construction • High-quality sensors for product and film detection • Adjustable guide rails for different product widths • Clean, modern control and drive technology • Ideal for food, non-food, industrial products, and more • CE marking • Perfectly suited for continuous packaging processes Condition Nedpexw S Ixefx Akfscr The machine is ready for immediate use and shows only minor signs of wear. The guide systems, rollers, sensors, and the entire mechanical assembly are in very good condition (see photos). Price Negotiable – €15,000 + €4,000 for printer.

Condition: used, empty load weight: 4,800 kg, maximum load weight: 13,200 kg, first registration: 11/2017, next inspection (TÜV): 10/2024, total length: 7,500 mm, total width: 25,500 mm, total height: 39,700 mm, suspension: air, tire size: 385 / 55 R 22.5 / 8mm, front tire size: 385 / 55 R 22.5 / 8mm, operation weight: 18,000 kg,

Condition: new, maximum load weight: 29,996 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,350 mm, loading space height: 1,460 mm, loading space volume: 25 m³, Year of construction: 2026, Equipment: ABS, NEW VEHICLE – IMMEDIATELY AVAILABLE!!! FOR SALE, FOR RENT, OR RENT WITH PURCHASE OPTION BY ARRANGEMENT!!! Stock no. 5718 Nedpfxsyz H Tas Akfocr New vehicle – immediately available! For sale, for rent, or rent with purchase option by arrangement! Approx. 25m³ Schmitz steel rear tipper semi-trailer with electric Cramaro tarpaulin / lift axle / also available for rent!! ----* Manufacturer: Schmitz Cargobull * Model: SKI 24 SL 7.2 * Year of Manufacture: 2026 * Gross Vehicle Weight: 36,000 kg * Unladen weight (per registration documents): 6,004 kg * Payload: 29,996 kg * Axles: 3x SCB axles / 1st axle liftable / starting aid / disc brakes * Suspension: Air suspension with raise and lower function * Tyres: 385/65 R22.5 NEW on steel rims * Colour: Body anthracite grey RAL 7016, chassis RAL 9005, tarpaulin deep black * Volume: approx. 25 m³ (7.48 m long x 2.35 m wide x 1.46 m high) * EBS * Fifth wheel height (unladen): 1,250mm * Rear swinging tailgate with 2-hook lock, all-round seal, and additional tension locks * Floor: 5 mm * Side walls: 4 mm * Automatic lowering during tipping * 3.50m aluminium hook-on ladder right side * Cramaro electric sliding tarp (400mm bow height) with remote control * Automatic foldable rear headboard * Access ladder front left * Individual mudguards with splash guards at rear * Steel parking supports (full capacity) * Bracket for hydraulic hose * Road paver brake electronically controlled via EBS * Folding underrun protection * LED rear lights with dynamic indicator * LED work lights left and right * 2x LED reversing lights at rear * LED side marker lights linked with indicator * 1x LED rear fog lamp * 1x tow coupling New vehicle – immediately available! For sale, for rent, or rent with purchase option by arrangement! Notice on possible errors in the listing: Despite careful preparation, errors may occasionally occur in the text or technical details. We accept no liability for mistakes, changes, or prior sales. All information is provided without guarantee. Please contact us to confirm details or clarify any questions.

Condition: new, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Purchase, rent, or lease with an option to buy – available by arrangement! Meiller 25m³ insulated tipper body with electric sliding tarp - NEW! --- * Manufacturer: Meiller * Type: MHPS44.3-N - Insulated tipper body * First registration: - (New vehicle) * Colour: Tarp RAL 9006 White Aluminium, Chassis RAL 7021 Black Grey * Capacity: approx. 25 m³ (approx. 7.60 m long x 2.30 m wide x 1.50 m high) * Axles: 3x BPW axles / 1st axle liftable / starting aid / disc brakes * Tyres: 385/65 R 22.5 tread S NEW * Suspension: Air suspension with raise and lower function * ABS / EBS * Swing tailgate with side toggle latches and rear wall seal * Internal access at the front left * Front hopper corners chamfered for improved material flow * 5/6 mm floor * 4 mm side walls * 4 mm front wall * 4 mm rear wall * Chassis frame in welded construction made of high-strength fine-grain steel * Fifth wheel height unladen: 1,247 mm * Fifth wheel height laden: 1,217 mm * Electric Meiller sliding tarpaulin with remote control * Individual mudguards Ncjdpewd Dhmefx Akfer * Aluminium air tanks * ECAS with automatic lowering during tipping operation * TPMS tyre pressure monitoring system * Foldable underrun protection * Additional LED reversing spotlight New vehicle! Purchase, rent, or lease with an option to buy – available by arrangement! Notice regarding possible errors in the advertisement: Despite careful preparation of this advertisement, occasional errors may appear in the text or details specified. We accept no liability for mistakes, alterations, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify further questions.

Condition: used, empty load weight: 5,200 kg, maximum load weight: 12,000 kg, first registration: 08/2017, next inspection (TÜV): 09/2023, total length: 7,500 mm, total width: 25,500 mm, total height: 39,700 mm, number of seats: 2, operation weight: 17,200 kg,

Condition: used, maximum load weight: 28,720 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 10/2015, next inspection (TÜV): 02/2027, total width: 2,550 mm, total height: 3,450 mm, Year of construction: 2015, Equipment: ABS, * Steel round tipper body * 1st axle liftable * BPW ECO Plus axles with drum brakes * Wabco Trailer EBS-E * Platform with sliding tarpaulin * Tire size: 385/65R22.5 * Technical gross weight: 38,500 kg * Unladen weight: 6,760 kg * Total length: 8,650 mm * Next safety inspection (SP) due: 08/2026 * Vehicle number: 11976 --- Nsdjyyt H Dopfx Akfocr Errors and prior sale excepted. Advertising decals and various labels have been digitally removed. We are happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we’ll take care of the rest. Among other services, we can offer the following (at additional cost): - Trade-in of your old vehicle - TÜV/SP inspection - Complete export processing - Financing arrangement - Application for export license plates - Vehicle transport and handover - Vehicle registration - Breakdown recovery and vehicle transport Your VTS Team

Condition: used, maximum load weight: 28,720 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 10/2015, next inspection (TÜV): 01/2027, total width: 2,550 mm, total height: 3,450 mm, Year of construction: 2015, Equipment: ABS, * Steel round tipper body * 1st axle liftable * BPW ECO Plus axles with drum brakes * Wabco Trailer EBS-E * Platform with sliding tarpaulin ----* Tire size: 385/65R22.5 * Technical gross weight: 38,500 kg Ncodpfx Aksyyt Hwofer * Unladen weight: 6,760 kg * Overall length: 8,650 mm * Safety inspection due: 07/2026 ----Vehicle number: 11978----Subject to errors and prior sale----Advertising and various decals have been digitally removed. -----We are happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer the following for an additional charge:----Trade-in of your old vehicle, TÜV/safety inspection, complete export processing, financing arrangements, procurement of export license plates, vehicle transfer, vehicle registration, recovery and vehicle transport----?YOUR VTS TEAM

Condition: new, mileage: 70 km, power: 88 kW (119.65 HP), overall weight: 3,500 kg, fuel type: diesel, color: white, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU ? Commercial Vehicle Centre in Germany, offering expertise, service and consultation, presents: ISUZU M21 TT E with three-way tipper, snow plough and silo spreader Net / export price: €69,900 2-year warranty on the chassis from the date of initial registration or up to 100,000 km Standard equipment: - 1.9 L diesel engine, VGS turbocharger with intercooler, common rail direct injection, 88 kW / 120 HP, EURO VI OBD-E (torque 320 Nm at 1,600 – 2,000 rpm) - Particulate filter system with DPD system and AdBlue (Self-cleaning system allows filter regeneration without a workshop visit, thanks to the new DPD regeneration technology that indicates when action is needed. Simply press the DPD button, and the system cleans itself in 20 minutes) - 6-speed manual transmission - 205 / 75 R16 C tyres, twin tyres on rear axle - Independent suspension front, rigid rear axle with leaf springs - Max. axle load front: 2,100 kg / rear: 2,435 kg - Disc brakes front and rear - Diesel tank: 70 L / AdBlue tank: 14 L - New, modern cab with excellent space utilisation, generous headroom and ample knee clearance, outstanding ergonomics and visibility, low entry height – Optimal night-time visibility with BI-LED headlights and LED rear lights - Cab paint: Arc White 729 - Cab width: 1,815 mm, rear axle width: 1,860 mm, height: 2,155 mm (cab roof) - Driver’s seat with armrest, dual passenger bench, 3-seater, headrests, seatbelt warning - Driver and passenger airbag, seatbelt tensioners for driver and passenger - Height and tilt adjustable steering wheel, interior mirror - Electronic immobiliser - Electric parking brake with Auto Hold-HSA system acting on the driveshaft - DAB+ radio 6.2" with Bluetooth – Apple Carplay/Android Auto compatible - Rear-view mirror with integrated display for reversing camera - Driver information display 7" - Steering wheel controls - Fog lamps, daytime running lights, automatic lighting - Electric windows, electrically adjustable and heated exterior mirrors - Central locking with remote control, tyre repair kit - Air conditioning Safety Pack 1 features: - ABS: Anti-lock Braking System with BAS - ASR: Traction control on rear axle - EBD: Electronic Brakeforce Distribution - EVSC: Electronic Stability Control - LDWS: Lane Departure Warning System Ncodpfx Ajyxubmokfjr - MOIS: Moving Object Detection - DWS: Distance Warning System - MAM: Emergency Braking Assist (obstacle detection) - FVSN: Forward Detection - DDAW: Driver Drowsiness Alert - TSR: Traffic Sign Recognition - TPMS: Tyre Pressure Monitoring System - AEBS: Advanced Emergency Braking System - RM: Reversing camera with monitor - AEBS: Autonomous Emergency Braking for pedestrians and cyclists Superstructure: Reinforced aluminium three-way tipper (Dimensions approx. 3,100 x 1,950 x 400 mm inside) - Folding side panels, rear panel pendulum-mounted and folding - Raised front panel with ladder rack and support at cab height, protective grille - Side-mounted toolbox on chassis - Recessed tie-down rings in the floor - Electrohydraulic tipping function Includes additional vehicle features: Underbody and chassis preservation Tow ball coupling, 2.5 t towing capacity incl. wiring kit, 13-pin 12V socket All-season tyres 205 / 75 R16 C M+S (surcharge for 7 units) Amber beacon, etc.

Condition: new, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total width: 1,930 mm, total height: 1,860 mm, Year of construction: 2026, Humbaur Three-way Tipper with Electric Pump and 600mm Mesh Side Extensions – HTK 3000.31 Base Price – €9,250 Our Promotional Price – €7,900 incl. 19% VAT, including steel mesh side extensions! Freight costs included (self-collection in Nuremberg), including registration certificate! Description: The HTK three-way tipper stands out not only for our consistently high quality standards. It comes equipped with a practical hand pump, which can easily be replaced with an electric hydraulic pump if required. For models with a permissible total weight from 3,000 kg upwards, both the electric and hand pumps are factory-installed. Tipping your payload becomes effortless, making unloading a seamless operation! Technical Data: * Trailer Type: Twin-axle * Construction: Aluminium * Rear Tipping Angle: 45° * Three-way Tipping Angle: 45° * Unladen Weight: 880 kg * Gross Vehicle Weight: 3,000 kg * Payload: 2,120 kg * Internal Length: 3,140 mm * Overall Length: 4,500 mm * Internal Width: 1,750 mm * Overall Width: 1,930 mm * Internal Height: 350 mm + 600 mm steel mesh side extension * Overall Height: 1,260 mm + 600 mm steel mesh side extension * Loading Height: 745 mm * Tyres: 13 inch Standard Equipment: * V-shaped drawbar, fully hot-dip galvanized * Chassis and tipping bridge fully hot-dip galvanized * Tipping bridge made from one-piece steel Ncsdpfx Asyw Eh Iekfor * Hand pump, option for electric hydraulic pump; from 3,000 kg GVWR both electric and hand pump fitted * Humbaur multifunctional lighting * Side walls made of anodized aluminium, fully removable * Rear tailgate with pendulum function * Lashing rings fitted in the bed floor, tensile strength 800 kg per ring * Support wheel * Channel for ramp storage (prepared for aluminium ramps for easy retrofitting)

Condition: used, mileage: 1,001 km, first registration: 01/2018, overall weight: 7,800 kg, color: white, driver cabin: other, gearing type: other, loading space volume: 6 m³, loading space length: 3,400 mm, loading space width: 2,000 mm, loading space height: 450 mm, Year of construction: 2018, Vehicle location: Bovenden, steel body, lashing eyes, swing gates. Body: 3-way tipper body with aluminium extension side panels (450mm) & electric hydraulic pump, approx. 6m³. Suitable for example for Mercedes Sprinter or Iveco Daily! TOP condition, only mounted on truck for approx. 16,000km! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Nedsyuy N Tepfx Akfscr

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453308, power: 2 kW (2.72 HP), load capacity: 750 kg, lifting height: 26,000 mm, platform length: 5,080 mm, platform width: 1,200 mm, overall weight: 18,260 kg, transport length: 5,690 mm, transport width: 1,390 mm, transport height: 3,170 mm, construction height: 4,160 mm, fuel type: electric, tire size: 28x12 -22, color: red, Equipment: UVV, all wheel drive, Technical Specifications Year of manufacture: 2022 Engine: Electric Working height: 28.00 m Platform height: 26.00 m Platform extension: 1.90 m Platform dimensions (L x W): 5.08 m x 1.20 m Overall dimensions (L x W x H): 5.69 m x 1.39 m x 4.16 m Max. load capacity: 750 kg Drive: 4 x 53 VAC / 2.0 kW Ncodpeyqyzujfx Akfjr Lifting drive: 53 VAC / 28.0 kW Travel speed: 0.1 - 1.5 km/h Gradeability: 30% Weight: 18,260 kg All-wheel drive, outriggers, fully functional, UVV, general signs of use