Used Strip Decoiler for sale (2,416)

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Lsdpfx Aoif Sg Sekfsrk Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: good (used), functionality: fully functional, Decoiler for up to 150 kg coil weight, stepless speed adjustable from 5 to 25 m/min. Rjbmnaoyyvzkj Sh Uer Lodpfx Aoyyyrmskfsrk

Condition: new, functionality: fully functional, Decoiler for up to 150 kg coil weight, fixed rotation speed of 10 rpm. Lrsdpfsyyvzksx Akfek

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Ljdpfohx R Etsx Akferk Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, Equipment: CE marking, TECHNICAL SPECIFICATIONS DOUBLE MANDREL DECOILER MILLUTENSIL TYPE SL MD 600: Model: SL MD 600 Lrjdpfxeyt Eldo Akfok Type: 600x400 Serial number: SM2-0043 Year of manufacture: 2010 Max. load per mandrel: 600 kg Max. strip width: 400 mm Max. strip width with arms: 300 mm Min. opening: 360 mm Max. opening: 620 mm Revolutions per minute: 16 Installed power per mandrel: 1.1 kW Voltage/frequency: 400 V / 50 Hz Auxiliary voltage: 24 V Weight: 1,000 kg Machine is in excellent condition. Complete with user manual and CE conformity declaration.

Condition: used, functionality: fully functional, Year of construction: 2015, The mechanical CIDAN decoiler DO is an easy-to-maintain decoiler with an adjustable central shaft. Lrjdpfox Sw U Njx Akfek

Condition: good (used), functionality: fully functional, Motorized decoiler, manufacturer SOPREM Load capacity: 200 kg Ljdpfx Ajyr Rdcekfork Coil diameter: 900 mm Maximum strip width: 220 mm Expanding range: approx. 240 - 550 mm

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder manufacturer/type AMADA ORII ST 02 Z Lrsdjxvitvjpfx Akfsk coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: excellent (used), Year of construction: 1973, functionality: fully functional, loading capacity: max. 700 Kg. disc diameter: 1.000 mm coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm Lsdpfxjxtp Eyo Akferk

Condition: excellent (used), Year of construction: 1995, loading capacity: max. 40 Kg. disc outside diam. 650 mm bundle outer diam. max. 600 mm bundle innert diam. 170 - 310 mm Lodoi T Ir Aepfx Akferk bundle width: max. 200 mm

Condition: excellent (used), Year of construction: 1978, loading capacity: max. 700 Kg. disc diameter: 1.000 mm Lrsdpei Hi Swofx Akfsk coil outside diam. max. 900 mm coil inside diam. 240 - 560 mm coil width: max. 120 mm

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder Lsdpfetgvgpox Akfsrk

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Ljdpswvv Rqofx Akfsrk Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Lrjdpfxoytqxpj Akfjk

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw Lrodpfx Aksgf Aaqjfok LIKE NEW UNUSED 4 PIECES IN STOCK

Condition: good (used), functionality: fully functional, Year of construction: 1985, Max. load 750 kg Max. belt width 300 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Lredpfsy E Ukujx Akfok DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1984, material width 300 mm coil weight 0,5 t material thickness 0,4 - 3,0 mm coil internal diameter 420 - 520 mm coil external diameter 1200 mm no. of straightening rolls 9 straightening roll diameter 50 mm number of draw-in rolls 2 diameter of draw-in rolls 50 mm power requirement 1,5 kW weight 1,55 t dimensions (WxDxH) 2,5 x 1,2 x 1,8 m Straightening machine with infinitely variable drive, supporting rolls, 2-point-adjustment of the straightening rolls Ljdpevuk Icjfx Akfsrk Decoiler not driven, with pneumatic lag break, manual centralized expansion

Year of construction: 2026, condition: new, Compact and reliable mechanical decoilers for light and medium coil handling with multiple capacity options. Bosporas Machinery is a manufacturer of coil processing and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our mechanical decoilers are designed for efficient, stable and cost-effective coil handling in various industrial applications. These machines offer reliable unwinding performance with compact design and easy operation, making them ideal for press feeding lines and light coil processing systems. The system is based on a mechanical expansion mandrel structure combined with motor-driven rotation and adjustable speed control, ensuring controlled and stable coil feeding. Lodpfx Akjyzd I Ieferk AVAILABLE MODELS 750 kg Mechanical Decoiler 2.500 kg Mechanical Decoiler 4.000 kg Mechanical Decoiler TECHNICAL RANGE Coil Weight Capacity: 750 kg – 4000 kg Coil Width Range: 20 mm – 1300 mm (depending on model) Coil Outer Diameter: 700 – 1300 mm Coil Inner Diameter: 300 – 630 mm / 480 – 600 mm (model dependent) ENGINEERING FEATURES Mechanical expansion mandrel system Motor-driven rotation system Frequency inverter controlled speed adjustment Belt and pulley transmission system Brake-controlled mandrel system Right-to-left / left-to-right operation capability OPTIONAL FEATURES Pneumatic upper arm (snubber arm) system Coil hold-down system Custom mandrel configurations Integration with press feeding systems OPERATIONAL ADVANTAGES Compact and space-saving design Cost-effective solution for light and medium coils Easy installation and operation Low maintenance requirements Flexible configuration options APPLICATION AREAS Press feeding lines Stamping and metal forming Sheet metal processing Roll forming lines General industrial applications REFERENCE & EXPERIENCE Images included in this listing show reference installations of similar mechanical decoilers successfully manufactured and commissioned in different countries. These references demonstrate our proven engineering capability and international project experience. Additional references and technical details can be provided upon request.

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Bidding obligates timely collection between 23/06/2026 and 26/06/2026! Auction of two decoilers, one of which is an EOC V 1000 AE-S (2001) Lodpfsy D Tlnex Akferk TECHNICAL DETAILS Diameter: approx. 1,200 to 1,500 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,500 x 1,800 mm Weight: 600 kg External reference: 69

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-quality and customized industrial solutions worldwide. This hydraulic decoiler is designed for heavy-duty coil handling applications, ensuring stable, safe and efficient unwinding of steel coils in industrial production lines. The system is available for capacities ranging from 6 tons up to 20 tons, depending on production requirements. Equipped with a hydraulic mandrel expansion system and high-pressure hold-down arm, the machine provides controlled and balanced coil feeding even under heavy loads. CONFIGURATION 6 Ton Hydraulic Decoiler 10 Ton Hydraulic Decoiler 15 Ton Hydraulic Decoiler 20 Ton Heavy Duty Hydraulic Decoiler Configuration varies depending on coil weight, width and line requirements. KEY FEATURES Hydraulic mandrel expansion system Hydraulic hold-down (snubber arm) for stable unwinding Forward–backward body movement for precise line alignment Coil loading car for safe and fast coil positioning Coil centering system Lredpfx Ajyy Sf Eokfjk Optional mandrel support for heavy coils OPERATIONAL ADVANTAGES Safe and stable coil handling Reduced operator intervention Improved production efficiency Short lead time compared to European manufacturers Long service life with robust structure APPLICATION AREAS Press feeding systems Coil processing lines Sheet metal production Automotive and steel service centers OPTIONAL EQUIPMENT Available optional features: Hydraulic coil loading car for safe and efficient coil handling Hydraulic hold-down (press arm) system for controlled unwinding Forward–backward movable decoiler body for precise line alignment Mandrel support system for heavy-duty applications REFERENCE PROJECTS Images included in this listing represent reference installations of similar hydraulic decoilers delivered and commissioned in recent years across different countries. These projects reflect our proven manufacturing capability and international experience. Additional references can be shared upon request.

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm Lodpfx Akox Emdgeferk

Condition: repair required (used), Sheet Metal Processing Unit, Decoiler, Straightener, Guillotine Shear, Reinhardt Maschinenbau GmbH Ras 228.60 Used Machine Manufacturer: Reinhardt Maschinenbau GmbH Model: Ras 28.60 Maximum Sheet Width: 1500 mm Maximum Sheet Thickness: 1.5 mm Total Weight: 9350 kg Features: Decoiler Measuring Unit Sheet Straightener Guillotine Shear Electrical Data: Voltage: 400 V Power: 12 kW Frequency: 50 Hz Current: 35 A Lrsdpovkbrqjfx Akfek Note: The control panel display is not functioning.

Year of construction: 2025, condition: new, Decoiling trolley for rubber strips COMALL JOINT Double, new Ledpod Dbp Usfx Akfork

Condition: used, Year of construction: 1988, gebraucht 1988 070009 prompt, Zwischenverkauf v Deutschland 1600 € 1 Ljdpfx Aswirq Tokfsrk 400 mm 700 mm 1500 mm 2050 mm 820 mm 1000 mm with brake with 2 spare mandrels

Condition: used, Year of construction: 1988, Strip feed line for sheet metal coils with decoiler and integrated feeder unit. Manufacturer: H. Schleicher GmbH & Co. Model: RMS 8-70/160-650 Model: HE-200-900 Spz Year of manufacture: 1988 Lredpfx Akoyyn Icefek Strip width: 100 – 600 mm Strip thickness: 0.5 – 3 mm Max. load: 11 t Voltage: 24 / 380 V Frequency: 50 Hz Power: 5 kW