Used Teka Dust Extraction,Filtration Teka for sale (7,634)

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Cjdpfx Abel Dw U Dsxerf Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: good (used), Year of construction: 2010, Dust extraction, filter ventilation, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is insufficient to maintain air quality in the workshop. Side-mounted ducts with a pollution capture point draw in contaminated air and direct it to the filter section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. Compressed air pulses clean the cartridge filters automatically at required intervals. After the compressed air hits, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the discharge of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. The filter is cleaned by a microprocessor controller with compressed air pulses during operation, which results in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA in accordance with EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges, each 36 m2) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of manufacture - 2010 Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Cedpfx Abeib Dadoxjrf Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Year of construction: 2019, condition: good (used), Dust extraction,welding fume extractor,cartridge filter self-cleaning,pneumatic,vacuum for plasma,laser,sandblasting,sodding,blasting and all kinds of dry dust. Brand: TEKA / Bystronic Model: Filtercube 4H / FilterBys Version 2 Year of manufacture: 2019 Filter cleaned by microprocessor controller with compressed air pulses during operation thus high efficiency of the device. Low compressed air demand thanks to the system "Power-Spray" The Filtercube central filter unit equipped with cartridge filters is the ideal solution for almost all problems in the area of smoke and dust filtration. Fan on the clean side which reduces the risk of explosion to a minimum. Application: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general hall filtering (push-pull system, displacement system) extraction system in combination with an extraction table extraction system for grinding of non-exploitable materials Parameters: 5.5 Kw fan Capacity 3800 m3/h Vacuum pressure 3250 Pa Inlet diameter : 250 mm Crsdpfx Ajnyhvqjbxef Filtration area of 100 m2 Equipped with "DUST-VAC" unit , which automatically pumps the dust into a separate tank. Possibility to order new filter cartridges tailored to the customer's needs Technical documentation included.

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Codpfxoxf Up Ij Abxjrf

Year of construction: 2003, condition: used, Colour: Cream Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 140 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Connection diameter [mm]: 400 - Number of connections [pcs]: 1 - Options: Collection container, Control cabinet - Transport dimensions: 1300mm x 1400mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information Crjdpsztbwhsfx Abxof VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2003, condition: used, Colour: Beige Empty weight: 1.000 kg Dimensions (LxBxH): 130 x 310 x 290 cm - Year: 2003 - Documentation available: No - CE marking present: Yes Codjzta Acepfx Abxerf - CE certificate present: No - Capacity [m³/h]: 9000 - Main fan [pcs]: 1 - Main fan power [kW]: 7.5 - Options: Welding fume extraction, Control cabinet - Transport dimensions: 1300mm x 3100mm x 2900mm (l x w x h) - Transport weight [kg]: 1000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Extraction capacity: 4200 m³/h Crsdpfx Abjxbf Rbjxjf Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm)

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) Crjdpfey N Duqex Abxjf - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. Csdjx Agpzepfx Abxerf It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, intake vacuum (max.): 2,400 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 2,350 mm, total length: 3,000 mm, total width: 1,100 mm, overall weight: 900 kg, Dust extractor, chip extractor, self-cleaning pneumatic vacuum filter Alko Mobil Power JET 300 The filter is pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. The fan is mounted on the clean air side, minimizing the risk of explosion. Ideally suited for wide belt sanders and all types of dry dust generated in various technological processes. Cedpfx Aoy A Iwcsbxsrf Fan power: 7.5 kW Capacity: 6000 m3/h Vacuum: 2400 Pa Connection diameter: 300 mm Air return Stock number: 1130

Condition: new, Year of construction: 2025, SCV8900TC VIBER BIG-BAG is a modern industrial dust extractor designed for intensive use in woodworking and manufacturing facilities. Thanks to the BIG-BAG system and the automatic VIBER filter cleaning system, the unit ensures continuous operation with minimal maintenance while offering a very large waste capacity. It is a unique solution on the Polish market. Key Advantages BIG-BAG – high-capacity container significantly extending the time between emptying cycles VIBER system – automatic filter shaking system ensuring long-lasting filtration efficiency TC housing – effective acoustic insulation and vibration dampening REHEAT – heat recovery from extracted air, improving the facility’s energy efficiency DAMAGE PROTECT – mechanical impeller protection against hard object intake Exceptional suction system tightness – maximum efficiency and no heat loss during winter Construction and Technology The unit is equipped with a metal, dynamically balanced impeller that guarantees quiet and stable operation while maintaining maximum airflow performance. The chip extraction fan is powered by a reliable 7.5 kW motor. The impeller blade design has been aerodynamically optimized to reduce energy consumption. Precision and Performance With a capacity of 8,900 m³/h and filtration of particles down to 5 microns, the system ensures perfect working conditions even in the most demanding woodworking and industrial applications. The SCV8900TC VIBER BIG-BAG chip extractor allows seamless connection to multiple machines simultaneously, supporting continuous operation. Application The machine is dedicated to professional woodworking shops, carpentry workshops, furniture manufacturers, and large industrial production lines where maintaining clean air is crucial. The central dust extraction system performs perfectly in cooperation with machines such as panel saws, edge banders, sanders, and CNC machining centers. Standard Equipment Polyester filters with 5-micron efficiency Cjdpeup Df Tofx Abxsrf Automatic filter cleaning system (VIBER) Built-in REHEAT system BIG-BAG waste collection unit DAMAGE PROTECT system Control cabinet Optional Equipment HEPA filter for finer dust fractions Bin fill level monitoring Differential pressure sensors Remote control system Technical Specifications Power supply voltage: 400 V Motor power: 7.5 kW Motor speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Number of filters: 45 pcs Filtration area: 23 m² Inlet diameter: 350 mm Capacity: 8,900 m³/h Vacuum pressure: 3000 Pa Air velocity: 32 m/s Noise level: 80 dB Number of BigBags: 1 pc BigBag capacity: 1250 L Dimensions: 2400 × 1100 × 3600 mm Weight: 540 kg

Condition: new, Year of construction: 2026, SCV11300TC VIBER BIG-BAG – Advanced Industrial Dust Extraction System with Dual BIG-BAG Waste Collection The SCV11300TC VIBER BIG-BAG is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. The unit stands out with its use of two high-capacity BIG-BAG collection bags, significantly improving waste management efficiency. Equipped with advanced filtration and protection systems, it provides effective extraction of sawdust, dust, and chips even during long-term continuous operation. Main Advantages of the Machine Two BIG-BAG collection bags – a unique market solution that increases waste storage capacity. VIBER system – automatic filter cleaning ensures constant extraction performance. TC housing – fully enclosed, sound-insulated construction reducing noise and vibrations. DAMAGE PROTECT system – mechanical protection preventing rotor damage caused by larger particles. REHEAT system – heat recovery from exhaust air, improving the energy efficiency of the facility. Design and Technology The SCV11300TC VIBER BIG-BAG is equipped with a reinforced 11 kW motor and a precisely balanced rotor, ensuring stable, reliable operation and high extraction performance of 11,300 m³/h. The housing has been designed for effective acoustic insulation and maximum suction system tightness, resulting in cleaner and warmer air in the workplace. Precision and Work Efficiency Thanks to 64 polyester filters with filtration efficiency down to 5 microns, and the possibility of installing an additional HEPA filter, the unit provides safe and highly effective air purification. The high suction speed (28–32 m/s) enables efficient removal of chips and sawdust from multiple workstations simultaneously. Applications The SCV11300TC VIBER BIG-BAG is an ideal solution for: woodworking plants, furniture factories, operators of panel saws, edge banders, and sanding machines, industrial installations requiring a central dust extraction system. Standard Equipment VIBER system – automatic filter cleaning Two BIG-BAG collection bags Control cabinet with operator panel TC housing with acoustic insulation DAMAGE PROTECT protection system Optional Equipment HEPA filter for extremely fine particles BIG-BAG filling level sensors Automatic fan reverse system Technical Specifications Cjdpfxoudav Ne Abxjrf Parameter Value Power supply voltage 400 V Motor power 11 kW Motor speed 3000 rpm Filter type Polyester, 5 microns / filter category "G" Filter dimensions Ø160 × 960 mm Number of filters 64 pcs Filtration area 30 m² Inlet diameter 350 mm Outlet diameter 500 mm Extraction capacity 11,300 m³/h Negative pressure 3000 Pa Air velocity 40 m/s Noise level 80 dB Number of BIG-BAGs 2 pcs BIG-BAG capacity 1250 L each / 2500 L total Dimensions (L × W × H) 3250 × 1100 × 3700 mm Weight 820 kg

Condition: new, Year of construction: 2026, DCV4500 VIBER – Modern Industrial Dust Extraction System with Automatic Filter Cleaning The DCV4500 VIBER is a modern industrial dust extraction system designed for continuous, efficient, and quiet operation in demanding woodworking environments. The unit ensures stable extraction performance throughout the entire operating cycle, minimizing the risk of efficiency losses and production downtime. Main Advantages of the Machine VIBER system – automatic filter cleaning without interrupting operation. Full upper enclosure – significantly reduces noise and vibrations. Extraction capacity of 4500 m³/h – ensures effective dust removal even with several machines operating simultaneously. Highly sealed system design – prevents heat losses and guarantees clean air in the production hall. New safety protection system – improves operational reliability. Metal rotor – dynamically balanced for quiet and vibration-free operation. Design and Technology The machine is based on a reinforced, hardened steel construction. Its compact dimensions allow the extractor to be installed close to a wall or between machines without limiting the available working space. Metal waste containers equipped with viewing windows and a mobile system enable quick emptying and easy monitoring of filling levels. Service doors provide convenient maintenance access and simplify the replacement of filter bags. Precision and Work Efficiency The dust extraction fan used in the DCV4500 VIBER provides an air suction speed of 28–32 m/s. Thanks to the specially designed rotor blade geometry, maximum efficiency is achieved with minimal energy consumption. At the same time, filtration down to 5 microns effectively captures fine dust particles, improving workplace air quality and enhancing the final quality of processed materials. Applications The DCV4500 VIBER is an advanced central dust extraction system ideal for: woodworking plants, furniture manufacturers, producers of wooden components. It efficiently supports machines such as sanding machines, panel saws, edge banders, and other equipment generating large amounts of dust and chips. Its reliable operation makes it suitable for both serial production and intensive industrial use. Standard Equipment Control cabinet with ON/OFF function 18 polyester filters with filtration efficiency down to 5 microns Metal waste containers with viewing windows Full sound-insulated enclosure Optional Equipment HEPA filters for filtration of particles below 5 microns Ceiling-mounted duct systems for multiple machines Equipment for operation with container level sensors Technical Specifications Parameter Value Motor power (S1) 3.0 kW Power supply 400 V / 50 Hz Motor speed 3000 rpm Extraction capacity 4500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 200 mm Cedpfx Aeuc Unqsbxerf Air velocity 28–32 m/s Filtration area 6 m² Number of filters 18 Filter material Polyester, 5 microns / filter category "G" Dimensions 752 × 1502 × 2200 mm Weight 220 kg

Condition: new, Year of construction: 2026, DCV8900TC VIBER Industrial Dust Collector – Advanced Extraction System with Automatic Filter Cleaning The DCV8900TC VIBER is a modern industrial dust extraction system designed for intensive operation in professional woodworking plants and industrial production facilities. Combining advanced technology with maximum efficiency, it ensures stable extraction performance while reducing noise and vibration levels. The integrated VIBER automatic filter cleaning system minimizes maintenance requirements and maximizes operational reliability. Key advantages VIBER system – automatic filter shaking and cleaning without interrupting operation. TC acoustic enclosure – effective noise insulation and vibration reduction. DAMAGE PROTECT system – mechanical protection against the intake of hard foreign objects. Cjdpfx Aoudaazobxerf REHEAT heat recovery system – recovers heat from exhausted air, improving energy efficiency. High airflow capacity of 8,900 m³/h – designed for large industrial facilities. High airtightness construction – cleaner air and reduced heat loss inside the production hall. Construction and technology The extraction unit is equipped with a reinforced metal impeller that is dynamically balanced to ensure stable, quiet, and reliable operation. The fan blade geometry has been optimized for maximum suction efficiency and reduced energy consumption. The integrated REHEAT system enables recovery of thermal energy from discharged air, significantly lowering operating costs and improving the overall efficiency of the ventilation system. Precision and performance The DCV8900TC VIBER maintains a constant suction velocity of 28–32 m/s, even when operating with multiple machines simultaneously. Polyester filters with a filtration accuracy of up to 5 microns, with the option of installing HEPA filters, ensure excellent air quality in demanding industrial environments. The automatic filter cleaning system maintains consistent airflow performance and reduces downtime associated with manual maintenance. Applications The DCV8900TC VIBER is designed for large-scale woodworking, furniture manufacturing, and industrial production facilities. It is ideal for extraction from machines such as: edge banding machines sanding machines panel saws format saws CNC woodworking equipment The unit works perfectly as a central dust extraction system for multiple production stations operating simultaneously. Standard equipment Automatic VIBER filter cleaning system TC acoustic insulated enclosure REHEAT heat recovery system DAMAGE PROTECT protection system Control cabinet Metal waste containers (500 L) Polyester filter cartridges Optional equipment HEPA filter system Additional air distribution system Ceiling-mounted extraction connections Technical specifications Parameter Value Motor power 7.5 kW / 400 V, 50 Hz Motor speed 3,000 rpm Extraction capacity 8,900 m³/h Maximum vacuum pressure 3,000 Pa Noise level 80 dB Suction inlet diameter 300 mm Air velocity 28–32 m/s Filter surface area 20 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 45 Dimensions (L × W × H) 2400 × 1170 × 2240 mm Weight 500 kg

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction Cjdpfx Abjuc U N Usxsrf REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Optional Equipment HEPA filters Ceiling-mounted extraction system Additional suction pipes and connectors Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: new, Year of construction: 2026, SCV15000TC VIBER BIG-BAG is a professional industrial dust extraction system designed for large woodworking facilities and industrial production lines. Equipped with two high-capacity BIG-BAG containers, it ensures maximum operational continuity and simplified handling while minimizing downtime. It is an ideal solution for extracting sawdust and dust from high-demand machinery requiring highly efficient air filtration. Key Advantages Capacity of 15,000 m³/h – ensures effective extraction even in the most demanding industrial applications 18.5 kW power output – high-efficiency S1-duty motor designed for continuous operation in harsh conditions VIBER system – automatic filter shaking system extending filter lifespan TC housing – fully sound-insulated enclosure reducing noise and vibration Two BIG-BAG containers – significantly increased waste capacity and more convenient unloading REHEAT – heat recovery system from exhaust air, reducing energy losses DAMAGE PROTECT – mechanical protection of the impeller and suction duct against damage caused by large objects Construction and Technology The SCV15000TC VIBER BIG-BAG is built on a rigid steel structure designed for intensive use in demanding industrial environments. The chip extraction fan features a dynamically balanced impeller with aerodynamically optimized blades, ensuring consistently high performance with low noise levels. The filtration unit consists of 117 polyester filter cartridges with a filtration surface area adapted to intensive dust extraction processes. Precision and Performance Thanks to high vacuum pressure and a large inlet diameter (400 mm), the extractor efficiently removes chips, dust, and sawdust from multiple workstations simultaneously. The design allows operation as a central extraction system, enabling full integration with an entire production line. High energy efficiency and the automatic filter cleaning system significantly reduce the need for frequent servicing, lowering operating costs. Applications The SCV15000TC VIBER BIG-BAG is recommended for operation with: panel saws and sliding table saws wide belt sanders edge banders and CNC milling machines automated woodworking and wood-based material processing lines Standard Equipment VIBER automatic filter cleaning system Polyester filters (117 pcs) TC sound-insulated housing DAMAGE PROTECT protection system Control cabinet with main switch Two BIG-BAG containers with support frames Optional Equipment HEPA filters for particles below 5 microns Bag fill level sensor Automatic shut-off valve Spark detection and fire suppression system Technical Specifications Power supply voltage: 400 V Motor power: 18.5 kW Rotational speed: 3000 rpm Filter type: Polyester, 5 microns / filter category “G” Filter dimensions: Ø160 × 960 mm Filtration area: 59 m² Number of filters: 117 pcs Inlet diameter: 400 mm Capacity: 15,000 m³/h Vacuum pressure: 3000 Pa Crjdpoup Difefx Abxsf Air velocity: 40 m/s Noise level: 80 dB Number of BIG-BAGs: 2 pcs BIG-BAG capacity: 1250 L each / 2500 L total Dimensions (L × W × H): 3850 × 1500 × 3800 mm Weight: 1150 kg

Condition: new, Year of construction: 2026, The CORMAK ODL6K extraction and filtration system is a modern solution that provides safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. The ODL6K is distinguished by an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. This is a comprehensive solution that increases safety, improves work efficiency and extends the service life of laser systems. The ODL6K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL6K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL6K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fireproof filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient dust collection and cleaning, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. Crodowcd I Ropfx Abxof The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters Number of filter cartridges 6 Air flow 6000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 7.5 kW Inlet diameter 300 mm Weight 590 kg Dimensions (L x W x H) 1150 x 1950 x 2250 mm

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Crsdewcdrvepfx Abxsf Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: good (used), Year of construction: 2011, Chain filter Capacity : 45.000 M3/hour ( 336 filter bags, in good condition ) 2 x 22 Kw dust extraction fans Csdpfezrtfzjx Abxorf Measures : L 8100 x W 2600 x H 7200 mm ( Must be dismantled in 2 sections for transport ) Electric cabinet with touch screen Location : south part of Denmark, close to German border

Condition: used, Industrial Dust Extraction System, Dust Collection Unit, CORAL POLIVAL 2 ADPE, Used Machine Manufacturer CORAL S.p.A. (Italy) Model Crjdpfjzh H Ubox Abxsf POLIVAL 2 ADPE Technical Specifications Serial Number: 00000201 Rated Power: 4.0 kW Motor Speed: 2800 RPM (high-speed, high-suction fan) Operating Voltage: 400 V, Three-phase Construction: Weather-resistant, modular galvanized steel housing Extraction Surface: 3700 × 1100 mm Version: ADPE – designed for the safe extraction of potentially explosive fine dust Overall Dimensions Width: 3160 mm Depth: 1100 mm Height: 2010 mm Filter Unit Dimensions Width: 2930 mm Depth: 1100 mm Height: 950 mm

Condition: used, TEDAK 3 Dust Filtration Unit Specifications: Crjdpezmd Trjfx Abxjf Manufacturer: TEDAK AB Country of origin: Sweden Model: TEDAK 3 Article No.: 111200 Serial No.: 13246 Operating pressure: 30 kPa Electrical control cabinet included Filter housing included Suitable for filtration of wood dust, chips and other dry materials in the woodworking industry

Condition: used, Year of construction: 2016, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,927 m³/h, suction capacity: 9,500 m³/h, intake manifold diameter: 350 mm, filter area: 42 m², noise level: 74 dB, total height: 2,420 mm, total length: 5,000 mm, total width: 1,250 mm, overall weight: 1,500 kg, Dust extraction system, wood chip extraction system, NESTRO NE 350 P self-cleaning negative pressure filter. Automatic filter cleaning with a pneumatic actuator. The fan is located on the clean air side, minimizing the risk of explosion. The unit is suitable for wide-belt sanding machines and all types of dry dust generated during various manufacturing processes. Fan power: 11 kW. Capacity: up to 9500 m3/h. Rated capacity: 6927 m3/h. Negative pressure: 2400 Pa. Nozzle diameter: 350 mm. Filtration area: 42 m2. Year of manufacture: 2016. Dimensions: Length: 5.00 m Depth: 1.25 m Height: 2.42 m Weight: 1500 kg Crodpjzdddyofx Abxof Stock number: 1143

Condition: excellent (used), Walther NOVA 2000 extraction and dust collection unit with 2 extraction arms Codsivta Nspfx Abxerf mobile, on castors 2 units available In very good, ready-to-use condition!!!

Condition: excellent (used), Dust extraction and filtration system, Nedermann Type 663 Crjdpfx Abjiyyxcjxof with 2 extraction arms In very good condition, directly from production!!!

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos Crjdpfx Aerw A U Isbxjf -Dimensions: 855/750/H1085 mm -Weight: 120 kg