Used Temperature Test Chamber 1000 Liters for sale (29,608)

Condition: excellent (used), CTS Temperature testing chamber T-55/1000 Li, water-cooled Temperature range: -50°C to +100°C Rated voltage: 400V 3/N 50Hz Rated power: 9.5 kW Rated current: 18 A Compressor: TFH2511Z / TFH2511Z, refrigerant R404A/R23 The type designation of the CTS chamber series is as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature -55°C 3) 1000 means: 1000-liter test chamber volume 4) Li means: special equipment for testing with lithium-ion batteries Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for customer-specific control of the test item Test chamber lighting: energy-efficient, bright LED light strip mounted on the door Insert rack: Stainless steel, support surface 970 x 980 mm Load per rack max. 35 kg Total load with max. rack load 100 kg 1a Conduit NW50 1b Conduit 2x NW125 1c Conduit 2x Rp 314° for Minimax Technical performance data: Temperature tests: Temperature range -50°C to +100°C Temperature deviation ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Fpsdpfozg Ty Usx Ap Den Heating 2.5 K/min Cooling 2.5 K/min Thermal compensation approx. 4000 W at +20°C approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test item, without thermal compensation and without additional equipment. Options can affect the performance data. Dimensions: Test volume 1000 liters Test chamber dimensions Height, approx. 1000 mm, Width, approx. 860 mm, Depth, approx. 1100 mm External dimensions Height, approx. 1950 mm, Width, approx. 1270 mm, Depth, approx. 1900 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated current 18 A Rated power 9.5 kW Protection class IP 54 Sound pressure level < 58 dB(A) (measured according to DIN EN ISO 3744 at a distance of 1 m from the front) Weight approx. 1000 kg Heat dissipation to the installation room 10.4 kW Refrigeration unit: water-cooled, low-noise, fully hermetic stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm Fodpfx Apjziizys Dspn - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss WT-1000/70/5 Temperature Test Chamber For sale is a pre-owned temperature test chamber manufactured by Weiss, model WT-1000/70/5. This unit is designed for precise temperature testing in industrial and laboratory environments, and is suitable for use in research, development, and quality assurance applications. The test chamber allows for reproducible temperature cycles across an extended temperature range and is particularly suitable for material testing, aging tests, and stress tests under defined temperature conditions. Technical Data Manufacturer: Weiss Model: WT-1000/70/5 Type: Temperature Test Chamber Temperature Range: -70 °C to +180 °C Temperature Deviation (over time, center of usable space): ± 0.1 to ± 0.5 K Temperature Homogeneity (spatial): ± 0.5 to ± 2 K Fpedpfx Asy D Nyusp Don Heating rate: 6.1 K/min Cooling rate: 6 K/min Test chamber volume: approx. 1000 liters Test chamber dimensions (approx.): 950 x 1100 x 950 mm (H x W x D) External dimensions (approx.): 2000 x 1415 x 2105 mm (H x W x D) Permissible total load, test chamber floor: 150 kg Permissible load per shelf: 50 kg Rated voltage: 3/N/PE AC 400 V ± 10% / 50 Hz Rated current: 38 A Rated power: 26 kW Refrigerants: R404 / R23 Weight: approx. 955 kg Features - Water-cooled system - Spacious test chamber - High rate of temperature change - Industrial grade construction Condition Used, with age- and use-related signs of wear. Service / Inspection For quality assurance, the following work is carried out on the offered systems: - Function check and replacement of necessary components - If required, refilling with legally compliant refrigerant - Leak test with certificate - Documented test run following successful inspection Scope of delivery - Weiss WT-1000/70/5 temperature test chamber - Accessories as shown Notes - Connection via 400 V three-phase power required - Shipping by freight carrier required due to size and weight - Sale from commercial inventory - All information subject to change - Prior sale reserved - For further information, feel free to contact us.

Condition: excellent (used), Vötsch VT 7100 Temperature Test Chamber -70°C to +180°C Features • Touch panel • Microprocessor-controlled monitoring and control system MINCON/32 • Extremely low noise level • Protection of test specimens through independent temperature measurement • Maintenance-friendly design • Door with window (including test chamber lighting) • Streamlined air flow Manufacturer: Weiss Vötsch Type: Temperature test chamber Model: VT 7100 Control system: MINCON / 32 Operating unit: Touch panel Test chamber volume: 990 l Temperature range: -70 °C to +180 °C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.1 to ±0.5 K Temperature change rate (cooling): 2.2 K/min Temperature change rate (heating): 3 K/min Electrical connection: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 13.8 kW Rated current: 29 A Weight: 910 kg Dimensions of the test chamber: Width: 1100 mm Depth: 950 mm Height: 950 mm Fpodpfxoph Uzxe Ap Dsn External dimensions: Width: 1390 mm Depth: 1855 mm Height: 1995 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Year of construction: 1990, condition: good (used), Weiss temperature test chamber WT 11-18 KWP 500/40 Spring, summer, autumn, and winter – your products must be able to withstand different temperatures during manufacturing, transport, storage, and use. The temperature test chambers from Weiss Technik help you to test the influence of thermal conditions on the properties, function, and service life of your products. Manufacturer: Weiss Technik Type: KWP 500/40 - 180 DU Designation: WT 11-18 Type: Temperature test chamber Test chamber volume: 500 liters Temperature range: -40°C to +180°C External dimensions: 110 cm wide, 173 cm deep, and 204 cm high Internal dimensions: 80 cm wide, 85 cm deep, and 85 cm high Pressure: 25 bar Voltage: 380 V Frequency: 50 Hz kVA: 4.7 Refrigerant: R 502 Year of manufacture: 1990 Condition: used Complete factory closure, large selection of storage platforms, pallet racks, shelving systems, paternosters. Fpjdpfx Aeh Izh Iep Den High-quality industrial machines, lathes, grinding machines, hand tools. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), ötsch VTS 7027-15 Temperature Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-15 Machine Type: Temperature Testing Chamber / Climatic Testing Chamber Test Chamber Volume: approx. 270 liters For sale is a used Vötsch VTS 7027-15 temperature testing chamber with programmable touch panel control. The unit is suitable for rapid temperature cycling tests, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging and stress tests. Technical Data: Temperature Range: -72 °C to +180 °C Heating Rate: approx. 17 K/min Cooling Rate: approx. 18 K/min Temperature Deviation over Time: ±0.1 to ±0.5 K Temperature Homogeneity (Spatial): ±0.5 to ±2 K Test Chamber Volume: approx. 270 liters Refrigerant: R404A / R23 Refrigerant Quantity: 6.5 kg / 2.3 kg Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 16 kW Rated Current: 31 A Cooling: Water-cooled Version Cooling water inlet and cooling water outlet available Dimensions: Internal Dimensions (W × D × H): approx. 580 × 620 × 750 mm External Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Equipment: Programmable Touch Panel Control S!MCON/32-NET Control Fpedjz A U N Tjpfx Ap Djn Stainless Steel Test Chamber Large Observation Window Test Chamber Lighting Side Access Ports for Test Specimens Stainless Steel Shelves Temperature Limiter RS232 Interface Program Mode and Manual Mode Shipping Data: Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight: approx. 835 kg Transport by forklift / lifting vehicle Condition: Used Visual condition as shown in the pictures. Scope of Delivery: Vötsch VTS 7027-15 Temperature Testing Chamber Touch Panel Control Stainless Steel Inserts as Shown in the Pictures Accessories as Shown in the Pictures Availability: Upon agreement. Scope of delivery as pictured. Subject to change, errors and prior sale.

Condition: excellent (used), Here, we offer a Weiss temperature chamber. Weiss temperature test chamber with S!MCON / 32 control, air-cooled (Refrigerant converted to R-452A) Control panel »Touchpanel« On the »Touchpanel« control panel, all control and operating commands can be triggered by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure sufficient ventilation of the machine part, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and test equipment to be placed in the test chamber. Feedthrough installed as standard R1: 125 mm L1: 50 mm Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse, to be provided by the customer: 16 A, slow-blow Sound pressure level approx. measured at a distance of 1m from the front, 1m height: 61 dB(A) Refrigerant: R-452A Weight: 620 kg Type: WT3-600/40 For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: Fpjdpezga Huofx Ap Den 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), Liebisch Constamatic S1000M-TR Corrosion Testing System Fjdpfxezcdyxs Ap Djpn Manufacturer: Gebr. Liebisch GmbH & Co. KG Type: S1000M-TR (4BVL) Made in Germany Corrosion testing system / salt spray chamber for performing salt spray, condensation water, and cyclic climate tests. Technical Data Test chamber volume: approx. 1000 liters External dimensions: approx. 2600 x 1120 x 1255 mm Test chamber dimensions: approx. 1435 x 780 x 600 mm Temperature range, test chamber: ambient temperature to 50 °C Temperature range, humidifier: ambient temperature to 70 °C Test solution reservoir: approx. 100 liters Voltage: 230 V Frequency: 50 - 60 Hz Phases: 1~ Rated current: 12 A Power consumption: 2700 W Test methods DIN EN ISO 9227 DIN EN ISO 6270-2 VDA 621 / 415 ASTM B368 MIL STD 202 F-101D VW PV 1210 Equipment Automatic control Temperature control for test chamber and humidifier Salt spray testing Condensation water testing Cyclic climate tests Pressure regulator Manometer Test specimen holders and test rods Reservoir for test solution Large insulated hinged lid with gas springs Condition Used equipment from industrial application. Optical condition according to the images. Interior with visible deposits and color changes due to test media. Control unit is active, the device can be switched on. A complete technical functional test under real test conditions was not carried out by us. Inspection possible by arrangement. Scope of delivery: see images. Loading can be arranged. All information is provided to the best of our knowledge based on nameplates, manufacturer's markings and available information. Subject to errors and changes.

Condition: excellent (used), Vötsch VTS 7027-10 Temperature Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VTS 7027-10 Machine Type: Temperature Testing Chamber / Climatic Testing Chamber Test Chamber Volume: approx. 270 liters For sale is a used Vötsch VTS 7027-10 temperature testing chamber with programmable touch panel control. The system is suitable for professional temperature testing, environmental simulation, material testing, electronics and component testing, quality assurance, as well as development, aging, and stress tests. Technical Data: Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 10 K/min Temperature Change Rate (Cooling): approx. 14.5 K/min Temperature Deviation (Time): ±0.3 to ±0.8 K Temperature Deviation (Spatial): ±0.5 to ±2 K Test Chamber Volume: approx. 270 liters Refrigerant: R404A / R23 Refrigerant Quantity: 8 kg / 2.1 kg Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 14 kW Rated Current: 26 A Cooling: Water-cooled design Cooling water supply and return lines available Dimensions: Internal Dimensions (W × D × H): approx. 580 × 620 × 750 mm External Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Equipment: Programmable touch panel control S!MCON/32-NET control, monitoring, and regulation system Fjdpfxsz A A Eco Ap Dopn Interior made of stainless steel Large viewing window Test chamber lighting Side openings for test specimens Stainless steel shelves Adjustable temperature limiter Software temperature limiter RS232 interface Water-cooled refrigeration unit Transportation Data: Dimensions (W × D × H): approx. 870 × 1,895 × 1,775 mm Weight according to model documentation, without options: approx. 835 kg Transportation by forklift or similar lifting vehicle Condition: Used Optical condition according to the images. Scope of Supply: Vötsch VTS 7027-10 temperature testing chamber Touch panel control Stainless steel inserts as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), Vötsch Type: VTS³ 7027-25 Heraeus Vötsch temperature testing chamber, water-cooled Fpjdpfxezg Eygj Ap Den Performance data: With a temperature change rate of 25 K/min Test chamber dimensions: height 750 mm, width 580 mm, depth 615 mm External dimensions: height 1775 mm, width 780 mm, depth 1895 mm Temperature range: -72°C to +180°C Temperature deviation (over time): ± 0.1 to ± 0.5 Temperature homogeneity (spatial): ± 0.5 to ± 2.0 Temperature change rate (cooling): 25 K/min Temperature change rate (heating): 25 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 270 liters 2x side ports, diameter 125 cm 1x side port, diameter 50 cm Chamber is water-cooled Test chamber lighting: LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 26 KW Rated current: 44 A Refrigerant: R-452A and R-23 Weight: approx. 980 kg For your safety as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), CTS Type: T-70/600/S Water-cooled temperature testing cabinet Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for customer-specific test specimen control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Fpjdpfxjzg Ty Ie Ap Djn Test volume 600 liters Test chamber dimensions height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leakage test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), CTS Type: T-70/600/S Water-cooled temperature testing chamber Refrigerant: Converted to R-452A Control: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site control of the test item Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20 °C approx. 2500 W at +0 °C approx. 1800 W at -40 °C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation, and without additional equipment. Dimensions: Fedpfx Apjzh D E Rj Djpn Test volume 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Rated current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg For your security as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: excellent (used), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal struts to increase the floor load capacity Fpodpszh Htwjfx Ap Den Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 1900 mm, width approx. 1050 mm, depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Year of construction: 2013, condition: excellent (used), Temperature Test Chamber VTS³ 7160-5 H Water-cooled For sale is a used temperature test chamber from the manufacturer Vötsch. The test chamber is suitable for temperature and climate testing, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: Vötsch Type: VTS³ 7160-5 H Equipment type: Temperature test chamber Test chamber volume: approx. 1568 liters Test chamber dimensions: approx. 1100 x 950 x 1498 mm (W x D x H) Housing dimensions: approx. 1300 x 2635 x 2013 mm (W x D x H) Weight: approx. 1700 kg Temperature range: -70 °C to +180 °C Temperature change rate (heating): approx. 5 K/min Fsdpfx Apszv S Hfj Depn Temperature change rate (cooling): approx. 4 K/min Max. heat compensation: approx. 5000 W Temperature deviation (time): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.1 to ± 2.0 K Refrigerant: R404A Refrigerant quantity: 5.20 kg ND max.: 18 bar g HD max.: 25 bar g Refrigerant: R23A Refrigerant quantity: 1.30 kg ND max.: 18 bar g HD max.: 25 bar g Cooling water consumption under full load at Temperature difference Dt = 10 K: 2.2 m3/h Temperature difference Dt = 5 K: 4.4 m3/h Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.6 kW Rated current: 32 A Features Touch panel operation Interior made of stainless steel Side access ports Test chamber equipment as shown in the pictures Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition according to pictures Scope of delivery 1x Vötsch VTS³ 7160-5 H temperature test chamber Important note: For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight transport possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone. Fjdpfxjzii A Rj Ap Dopn

Condition: excellent (used), Vötsch VC 4060 Climate Testing Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VC 4060 Machine Type: Climate Testing Chamber / Temperature Testing Chamber Test Chamber Volume: approx. 600 liters Control System: S!MCON / 32 Cooling: water-cooled Refrigerant: R452A For sale is a used climate testing chamber from Vötsch. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical Data Test Chamber Dimensions: approx. 800 x 800 x 950 mm (W x D x H) Housing Dimensions: approx. 1090 x 1960 x 1995 mm (W x D x H) Weight: approx. 600 kg net Temperature Range: -40 °C to +180 °C Temperature Change Rate (Heating): approx. 4.0 K/min Temperature Change Rate (Cooling): approx. 3.0 K/min Temperature Deviation (Time): ±0.1 to ±0.5 K Temperature Deviation (Spatial): ±0.5 to ±2 K Temperature Gradient: approx. 1 to 4 K Climate Range (Temperature): -10 °C to +95 °C Humidity Range: 10 % to 98 % RH Humidity Deviation: ±0.1 to ±3 % RH Temperature Deviation (Climate Operation, Time): ±0.1 to ±0.3 K Temperature Deviation (Climate Operation, Spatial): ±0.5 to ±1.0 K Temperature Gradient (Climate Operation): approx. 1 to 2 K Power Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated Power: 7.8 kW Fodpfx Aozf E E Tjp Dspn Rated Current: 15.0 A Fuse: 16 A slow-blow, on-site 1 cable entry Ø 50 mm installed on the left 1 cable entry Ø 125 mm installed on the right Test chamber made of stainless steel Touch panel operation Equipment S!MCON / 32 control system Touch panel operation Interior made of stainless steel Test chamber lighting Side cable entries Ø 50 mm and Ø 125 mm Shelving / test chamber equipment as shown in the pictures Water-cooled system Documentation / operating manual Accessories as shown in the pictures Application Areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Supply 1x Vötsch VC 4060 Climate Testing Chamber Documentation / operating manual Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Inspection possible by appointment Note: The unit has been converted to use R452A refrigerant. Scope of supply as pictured. Subject to changes and errors in the technical data, as well as prior sale.

Condition: excellent (used), CTS TS-70/200-5/S Temperature Testing Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: TS-70/200-5/S Machine Type: Temperature Testing Chamber / Stress-Screening Testing Chamber Test Chamber Volume: approx. 200 liters For sale is a used temperature testing chamber from the manufacturer CTS. The testing chamber is suitable for temperature testing, stress screening, environmental simulation, material testing, quality assurance, as well as development and endurance tests. Technical Data Temperature Range: -70 °C to +180 °C Temperature Change Rate (Heating): approx. 8 K/min Temperature Change Rate (Cooling): approx. 6 K/min Max. Heat Radiation at +20 °C: approx. 3500 W Test Chamber Dimensions (approx.): 650 x 400 x 750 mm (W x D x H) Housing Dimensions (approx.): 920 x 1345 x 1800 mm (W x D x H) Weight (approx.): 550 kg Power Connection: 400 V 3/N / 50 Hz Power Consumption: 10.9 kW Rated Current: 15.7 A Protection Class: IP22 Refrigerant, Pre-cooling Stage: R404A Refrigerant Quantity, Pre-cooling Stage: 2.5 kg Refrigerant, Cooling Stage: R23 Refrigerant Quantity, Cooling Stage: 0.6 kg / 15 bar Operating Pressure PS: 25 bar Test Pressure PT: 20 bar Equipment Touch panel operation Viewing window in the door Stainless steel interior Test chamber lighting Side openings as shown in the pictures Shelves / test chamber equipment as shown in the pictures Over-temperature test specimen protection Eurotherm safety controller RS232 interface Documentation / documents as shown in the pictures Areas of Application Temperature testing Stress screening Environmental simulation Material testing Electronics testing Quality assurance Research and development Scope of Delivery 1x CTS TS-70/200-5/S Temperature Testing Chamber Shelves / test chamber equipment Existing documentation / documents Accessories as shown in the pictures Condition Used Optical condition as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes and errors in technical data as well as prior sale. Fsdszf Hi Hepfx Ap Dopn

Condition: excellent (used), We are offering a Weiss temperature test chamber for sale. Weiss Temperature Test Chamber with S!MCON / 32-controller, water-cooled Control Unit: "Touchpanel" All control and operation commands can be initiated by simply touching the function symbols on the "Touchpanel" control unit. Adjustable Feet The test chamber is equipped with adjustable feet to compensate for floor unevenness and to provide adequate ventilation for the machine section. Cable Ports Cable ports are installed on both the right and left sides of the test chamber. These allow measurement cables and test devices to be routed into the test space. Ports included as standard: - R1: NW 125 mm - L1: NW 50 mm (The refrigerant has been converted to R-452A) Test Chamber Volume: approx. 600 liters External dimensions with hinges and door lock: Height: 1995 mm, Width: 1090 mm, Depth: 1660 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1000 mm, Depth: 1660 mm Fodpfx Apsziyb Re Depn Internal dimensions: Height: 950 mm, Width: 800 mm, Depth: 800 mm Temperature Test Data: Temperature range: -42 to +180 °C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min Maximum thermal compensation: 2500 W Operating Data: - Test chamber lighting: Halogen bulb 2 x 24V, 50W - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated current: 15 A; Rated power: 7.8 kW - Fuse (on-site): 16 A slow-blow - Sound pressure level: approx. 58 dB(A) (measured 1 m in front, 1 m height) - Refrigerant: R-452A - Weight: 620 kg Type: WT3-600/40 Important information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refill with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement) < 69dB (A) Side feedthrough: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R 452A and R 23 Weight: approx. 570 kg Type: VTS 7034-5 For your security as a buyer, please note the following: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant Fpsdpfx Ajzd R Tgjp Den 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have on the phone.

Condition: good (used), Feutron Temperature Testing Chamber -40 to +100°C The Feutron TPK 3403/125, thanks to its robust design, is a reliable workhorse for standardized temperature tests. The main application areas for this model are: 1. Electronics and Component Testing This is the most common application. It involves testing how components react to extreme temperatures: Functional testing: Does the circuit board still function flawlessly at -40 °C or +150 °C? Burn-in tests: Artificial aging of components through continuous operation at high temperatures to provoke early failures. 2. Material Testing Investigation of physical changes in materials: Brittleness: Do plastics or rubber seals become brittle in the cold? Deformation: Do composite materials warp in the heat? Storage tests: How stable do chemical substances or adhesives remain over long periods at a constant temperature? 3. Quality Assurance (QA) Sample testing: Tests carried out during production to ensure that the production process meets the specified temperature ranges. Standard testing: Conducting tests according to common industry standards (e.g., DIN EN 60068), which prescribe specific temperature profiles. 4. Research & Development Prototyping: Testing new housing designs or materials under controlled thermal conditions before mass production. Manufacturer: Feutron Type: TPK 3403/125 Temperature range: -40 to +100°C Refrigeration unit: Air-cooled condenser Temperature stability: approx. ±0.1 to ±0.5 K Usable volume: approx. 125 liters Refrigerant: R22 Operating overpressure: 23 bar Power connection: 220/280V-3-50Hz Supply line fuse: 25 A Protection class: IP 20 Weight: 480 kg "Everything from a single source: We would be happy to offer you suitable bank financing for your project." Fpedpfsy Nynasx Ap Den More items – new and used – can be found in our shop! International shipping costs upon request!

Condition: excellent (used), Here we offer you a temperature test chamber. Water-cooled Technical specifications: Temperature operating range Fpodpfx Apsziyphj Djn Temperature range in °C: -70 / +180°C Temperature change rate according to DIN 50 011, Part 12 Cooling rate: approx. 5 K/min Heating rate: approx. 5 K/min Dimensions: Test volume: 350 liters Test chamber dimensions (approx.): Height 750 mm, Width 650 mm, Depth 720 mm External dimensions (approx.): Height 1800 mm, Width 850 mm, Depth 1640 mm Operating data: Electrical connection: 400 V, 3/N, 50 Hz Nominal power: 13.3 kW Refrigerant: R404A / R23 Weight: approx. 650 kg Type: TS-70/350 Important safety information for buyers: The following steps are performed on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, monitored with calibrated instruments. Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) Further questions can be answered by phone.

Condition: excellent (used), CTS Climate Test Chamber T-70/600 Water-Cooled Temperature Range: -70°C to +180°C Rated Voltage: 400V 3/N PE 50 Hz Rated Power: 6.7 kW Rated Current: 10.2 A Compressor: TFH2480Z/TFH2511Z, Refrigerant R23/R404A Control System: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- keys - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for user-side test specimen connections Shelving: Stainless steel, shelf area 820 x 710 mm Load capacity per shelf max. 35 kg Total load capacity with full shelf configuration 100 kg Cooling Unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Fpodpfjziycbex Ap Djn Temperature Testing: Temperature range -70°C to +180°C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate according to DIN 50 011, Part 12 measured at the center of the test chamber: Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refer to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without thermal radiation, and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating Data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current 10.2 A Protection class IP 22 Condensate drain non-pressurized, R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information reserved!) Further questions can be answered by phone.

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C For combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature tests as well as tests in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, and development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific Simpac unit Fpodpfxjz Ixwlo Ap Djn Equipment type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate (cooling): approx. 10.5 K/min Temperature change rate (heating): approx. 12.0 K/min Test chamber dimensions (W x D x H): approx. 1,100 x 1,100 x 950 mm External dimensions (W x D x H): approx. 1,525 x 3,590 x 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Large stainless steel test chamber Observation window Test item feedthroughs Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Areas of application: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Existing connection and supply components Accessories as shown in the pictures Shipping or freight forwarding possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by phone.

Condition: good (used), Heraeus Vötsch HC 4055 Temperature Testing Chamber Manufacturer: Heraeus Vötsch Type: HC 44055 Temperature chamber Temperature range: +180°C Rated voltage: 380V, +/-10%, 3/N, 50Hz Rated current: 13.5 A Rated power: 9 kW Housing dimensions: W 1065 x D 1560 x H 1890 (mm) Observation window: Width x Height 350 x 640 mm Fsdouuilvopfx Ap Dspn Test chamber: (L x D x H) approx. 800 x 795 x 855 mm Test chamber volume: 550 l Chamber is air-cooled Caution: Chamber can only be operated as an oven. Refrigeration circuit is empty and deactivated. Climate control system is deactivated. Disconnected contactors: 03K2 Compressor 03K5 Condenser fan 15K6 Panel heater Semiconductor relay 21V4 Humidifier. Weight approx. 550 kg You can find more new and used items in our shop! International shipping costs upon request!

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Fsdpfx Apozzli Re Dspn Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.