Used Tpe Jobstack for sale (70)

Year of construction: 2009, condition: used, Compensating stacker for stacking printed products Year 2009 Iedpfxsv Sdcho Acaotk

Year of construction: 2010, condition: good (used), functionality: fully functional, The front carriage is in reasonably good condition and contains various male and female connectors. Iodpjzb U Rlefx Acastk

Condition: used, Year of construction: 2020, functionality: limited functionality, overall weight: 150 kg, GRUNDFOS Electronically Controlled Dry-Running Pump TPE 100-250/2-S A-F-A-BAQE-ND1 Single-Stage Inline Pump Art. 99114824 PN16. 3 x 380-500 V DN100 with MGE160MH-2-FF300-JA Motor We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but fully operational. The pump was functioning flawlessly up until removal a few weeks ago. Manufacturer: Grundfos Iedpfjyc T Apex Acajtk Model: TPE 100-250/2-S A-F-A-BAQE-ND1 Description: Single-stage inline pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2930 rpm Rated flow: 135 m³/h Rated head: 20.1 m Mechanical seal: BAQE Pump housing: Cast iron Impeller: Cast iron Gross weight: 157 kg For further technical details, please refer to the nameplate. Scope of delivery as shown. Inspection prior to purchase is possible and expressly encouraged. 2 units available. Price: per unit #Shelf 21-1-9 Shipping possible, but buyer pays shipping costs. Single-stage volute pump with opposing suction and discharge ports in inline design. Suction and discharge ports have the same diameter. The pumps are constructed according to the top-pull-out principle, i.e., the pump head (motor, headpiece, and impeller) can be easily removed for servicing or maintenance while the pump housing remains in the piping. The pump is equipped with an unbalanced rubber bellows seal. The mechanical seal complies with EN 12756. Piping connection via DIN flanges PN 16 according to EN 1092-2 and ISO 7005-2. The pump features a fan-cooled permanent magnet synchronous motor. The motor efficiency corresponds to energy efficiency class IE5 according to IEC 60034-30-2. For speed control, the motor is equipped with a frequency converter and PI controller, both integrated into the motor terminal box. Electronic speed control enables continuous adaptation of motor speed and thus pump output to current demand. The pump is equipped with a differential pressure sensor.

Condition: new, functionality: fully functional, Grundfos TPE 50-430/2 S-A-F-A-BQQE-LD1 Single Stage Close Coupled In Line Centrifugal Pump. Specifications: Iodpfjtp A Shsx Acastk DN50 flanges 345mm between flanges Q = 35.1m3/h H = 33.9m n= 2920 /min Good working condition. Please check out our other listings as well.

Condition: good (used), Year of construction: 2003, operating hours: 10,405 h, load capacity: 4,000 kg, lifting height: 3,200 mm, fuel type: diesel, mast type: duplex, construction height: 2,400 mm, Linde H40T-02 Duplo 320 Sideshift Perkins Diesel, 2003 Itsdpfozr Eplox Acask A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always present. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, Isdpjzarn Eofx Acajtk - more details available

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Iedpfx Acew D R N Reajtk Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph Itjdpfx Acjyighijajk - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Year of construction: 2019, condition: used, Technical details: control: Sinterit Studio 2019 Open voltage: 220/50 V / Hz total power requirement: 1,0 (max. 1,8) kW weight of the machine approx.: 90 kg dimensions: 690 x 510 x 900 mm Itjdeu N Auuopfx Acask 3D printer SLS Laser System IR Laser Diode 5 (W) Max. Print distance diagonal: 316mm Flexa/TPE - high accuracy max. print volume 110 x150 x 250mm PA - high accuracy max. print volume 90 x130 x 230mm X/Y accuracy: 0.05mm table size/working space: 150 x 200 x 260mm built-in nitrogen chamber nitrogen consumption: 0,48 m³/h heating system with max. chamber temperature: 200°C Accessories: Glass plate (Laser Protective Glass) 1x USB (software accessible), Software Sinterit Studio 2019 open, supported formats STL,OBJ,3DS,FBX,DAE,3MF, operating system MS Windows Light source (Set of Infrared heaters 24V) various bottles with polyamide powder div. small parts *

Condition: good (used), Year of construction: 1998, operating hours: 7,998 h, load capacity: 3,200 kg, lifting height: 4,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, Hyster H3.20XML Triplo 460 Freelift / Sideshift Perkins Diesel 1998 Video available via WhatsApp. Ongoing stock; see our website. Prices ex Nuland. Van de Wert Trading B.V. maintains a varying stock of machinery, trucks, trailers, and attachments. All our deliveries are at trade prices, sold AS-IS with no warranties. (see our terms and conditions) For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Itedpoynh Auefx Acask 5391 LR Nuland

Year of construction: 1981, condition: refurbished (used), functionality: fully functional, Previous application: Production of TPE films up to 6 mm thick. Many other polymers possible. The plant has been in operation until now and can be inspected at any time in Nuremberg. The line consists of: Kuhne K45-24D single-screw extruder Screw diameter: 48 mm Itsdpfxju Ttf Ne Acaek Process length: 24D Drive power: Heating capacity: 6.0 kW Net weight: 1150 kg Wide slit nozzle: Foils up to max. 330 mm width Calender Gross roller width: 1200 mm Net roller width: 1100 mm (max. film width) Take-off device and impact shears

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453778, power: 15 kW (20.39 HP), load capacity: 680 kg, lifting height: 13,000 mm, platform length: 3,980 mm, platform width: 1,830 mm, overall weight: 8,340 kg, transport length: 4,880 mm, transport width: 2,330 mm, transport height: 2,260 mm, construction height: 3,020 mm, fuel type: electric, tire size: 315/55/D 20, color: red, Equipment: all wheel drive, Technical Data Year of manufacture: 2022 Engine: Electric Working height: 15.00 m Platform height: 13.00 m Isdpfx Acsyxc Saeaetk Platform extension: 1.43 m Platform dimensions (L x W): 3.98 m x 1.83 m Overall dimensions (L x W x H): 4.88 m x 2.33 m x 3.02 m Max. load capacity: 680 kg Load capacity when extended: 227 kg Max. persons: 7 Drive system: 32 VAC / 9.0 kW Lifting mechanism: 32 VAC / 15.9 kW Travel speed: 1.0 - 6.0 km/h Gradeability: 40% Weight: 8,340 kg General signs of use, fully functional

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453768, power: 15 kW (20.39 HP), load capacity: 680 kg, lifting height: 13,000 mm, platform length: 3,980 mm, platform width: 1,830 mm, overall weight: 8,340 kg, transport length: 4,880 mm, transport width: 2,330 mm, transport height: 2,260 mm, construction height: 3,020 mm, fuel type: electric, tire size: 315/55/D 20, color: red, Equipment: all wheel drive, Technical Data Year of manufacture: 2022 Engine: Electric Itodpfeyqzx Uox Acaok Working height: 15.00 m Platform height: 13.00 m Platform extension: 1.43 m Platform dimensions (L x W): 3.98 m x 1.83 m Overall dimensions (L x W x H): 4.88 m x 2.33 m x 3.02 m Max. load capacity: 680 kg Load capacity when extended: 227 kg Max. persons: 7 Drive system: 32 VAC / 9.0 kW Lifting mechanism: 32 VAC / 15.9 kW Travel speed: 1.0 - 6.0 km/h Gradeability: 40% Weight: 8,340 kg General signs of use, fully functional

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Iedozhdldjpfx Acaotk Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: used, mileage: 6,200 km, power: 115 kW (156.36 HP), first registration: 11/2025, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: automatic, number of seats: 3, loading space length: 2,900 mm, loading space width: 2,100 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Subframe: Stable, lightweight aluminum construction. Longitudinal and transverse beams made of aluminum. Subframe connected to the chassis according to the truck manufacturer's guidelines. External frame with lashing points. Floor: Consisting of 18 mm thick vehicle construction panels, with a film coating on the underside to prevent moisture penetration, and a non-slip screen-printed texture on the top. The panels are laid flat and sealed around the perimeter. Front wall: Closed with corner posts extending to under the roof, filled with aluminum hollow profiles. Side walls: Equipped with a PentaWave sliding tarp system, which is supported both at the top and bottom in specially shaped profiles. The sliding rollers inside allow the side walls to be moved effortlessly. These can be easily and quickly closed using the integrated tensioning system. Rear wall: Open, prepared for the installation of rear doors (see special versions!). Roof: Fixed roof, consisting of clamped crossbars in a 400 mm grid, with a tarp above. Impact protection: Aluminum strip attached to both sides to guide the Penta-Wave system. Accessories: 1 set of mudguards including mud flaps Holder for wheel chocks Red position lights above the rear portal on the left and right, as LEDs 3rd brake light in the center above the rear portal doors, as an LED Contour marking according to ECR R48, white on the sides and red at the rear, strip width 55 mm Load securing with KIM system 3 rows of Ancra Jungfalk with TRS locking bars KIM 5 x 7 cm (ceiling-guided) with horizontal spring telescopic rods Ijdpfxozhdk Tj Acaotk 3 additional locking bars KIM 5 x 7 cm (without ceiling guidance). Mounting of barrier bars to the additional locking bars on the right and left made of aluminum square tube for load securing in the longitudinal direction. Interior lighting 1 LED light strip, centered in the body, including connection to the driver's cab switch. Two-wing rear door Made of aluminum sandwich panels with internal rotary latch closures. The doors have a smooth surface (optimal for lettering). Drop-down brackets for hole rows in the outer frame 4 pieces per side, mounted with a flap and stop nut (more can be installed upon customer request). Side impact protection Side flank protection, brackets galvanized and foldable, planks anodized. Rear view camera Rear view camera including connection to the monitor or navigation system installed by the truck manufacturer. If you have any questions about this vehicle, please contact Mr. Markus Müller:

Condition: excellent (used), Year of construction: 2000, operating hours: 4,957 h, free lift: 4,000 mm, fuel type: diesel, gearing type: automatic, color: yellow, Year of manufacture: 2000 Unladen weight: 4,610 kg Lifting capacity: 3,000 kg Technical condition: very good Itjdpszd E S Djfx Acask Optical condition: very good Please contact Thierry Leemans for further information.

Condition: new, Telemecanique TSX TPE01 Prom Programmer, unused in original packaging, 100% functional, scope of delivery as per photos Ijdpezu Hg Defx Acastk

Condition: used, Year of construction: 2021, Grundfos Dry-Running Pump, electronically controlled TPE3 40-80 S-A-F-A-BQQE-CDB Art. 99272194 Single-stage in-line pumps with speed-controlled MGE motor PN16. 3 x 380-500 V DN100 with MGE90SC 2-56C-IA-150 motor P.C.: 2114 We are offering the Grundfos electronically controlled dry-running pump. ⭐︎ Condition: Good (used) The electronically controlled dry-running pump is used but operational. The pump was functioning perfectly up until removal a few weeks ago. Manufacturer: Grundfos Type: TPE3 40-80 S-A-F-A-BQQE-CDB Description: Single-stage in-line pumps with speed-controlled MGE motor Frequency converter: integrated Pump speed: 2970 rpm Rated flow: 12.3 m³/h Rated head: 5.4 m Mechanical seal: BQQE Pump casing: cast iron Impeller: cast iron Gross weight: 41 kg For further technical details, please refer to the nameplate. Scope of delivery as pictured Inspection prior to purchase is possible and expressly encouraged. #Shelf 11-1-9 Shipping possible, but the buyer bears shipping costs. Worldwide shipping available. Iedpeyf Hf Nefx Acajtk

Condition: used, power: 480 kW (652.62 HP), first registration: 01/2026, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, traction control, trailer coupling, - Heated mirrors - Leaf spring suspension - Differential lock - Low noise - Air conditioning - Air-suspended seats - PTO MAN TGS 35.480 BB 8x4 EuromixMTP EM 10 L Registered in: 01/2026 700 km MAN D2676 LFAY, 6-cylinder diesel engine 12.4 liter displacement 480 hp / 353 kW 2,450 Nm of torque Emission standard Euro 6e Iedpfx Ajzuxztscaetk MAN EVBec high-performance engine brake, steplessly adjustable MAN TipMatic 12.28 OD automatic transmission MAN TipMatic Efficiency driving program MAN TipMatic Offroad driving program Rocking function Axles and chassis 8x4 axle configuration Front axle: 9,200 kg, steered Rear axle: MAN HPD-1382, 13,000 kg, outer planetary axle with through-drive Differential locks on both driven rear axles Axle ratio i = 3.63 Leaf spring suspension front and rear Stabilizer on front and rear axles Emergency steering pump Tires and rims Front axle: 385/65 R22.5, steering/construction site profile Front axle: 385/65 R22.5, steering/construction site profile Rear axle: 315/80 R22.5, drive/construction site profile Rear axle: 315/80 R22.5, drive/construction site profile Steel rims front: 11.75 x 22.5 Steel rims rear: 9.00 x 22.5 Steel rims painted in white aluminum Wheel nut covers on both front axles Braking system and safety Electronic Braking System EBS Anti-lock Braking System ABS Anti-Slip Regulation ASR Electronic Stability Program ESP Full brake assist Emergency Brake Assist EBA Electronic parking brake Spring brake parking brake on the rear axles Additional pneumatic parking brake on the front axles MAN EasyStart hill start assist Disc brakes on both front axles Drum brakes on both rear axles Steel air tank Lateral underride guard Front underride guard Round rear underride guard Cab and comfort MAN NN cab Narrow, medium length and normal height Air-suspended driver's comfort seat with armrests Air-suspended passenger comfort seat with armrests Textile seat covers Multi-function steering wheel, adjustable in height and inclination Instrument panel Professional, 12.3 inches MAN Climatronic air conditioning system Auxiliary heater, 4 kW Automatic windshield wipers with rain sensor Automatic headlight control with light sensor Tinted front and side windows Central locking Two vehicle keys Two sockets, 12 V and 24 V MAN EasyControl with four externally operated functions Washable door interior panel Storage and stowage compartments in the cab rear wall Color scheme Moon Grey Lighting H7 headlights LED daytime running lights H7 fog lights High beam assist LED side marker lights Two LED outline lights Two yellow LED rotating beacons on the cab roof Two LED work lights on the cab roof Preparation for body lighting Electric two-tone horn Mirrors and camera preparation Exterior mirrors, electrically adjustable and heated Curb mirror right, electrically adjustable and heated Front mirror Design for body widths from 2,400 to 2,600 mm Preparation for two cameras

Condition: used, functionality: fully functional, Layher Allround U-Console with Pin 0.39 m – used This used Layher AR U-console with pin (length 0.39 meter) is specifically designed to create additional working width on your Layher Allround scaffolding system. Ideal for extending work platforms towards facades or for maintenance and renovation tasks that require more space. ✅ Features: Length: 0.39 meter Design: steel (lightweight LW version), robust and durable Original Layher Allround system component Quick and safe installation without special tools needed Used condition: fully functional, with normal signs of use ✅ Benefits: A cost-effective alternative to new parts. Available directly from stock, also in larger quantities. Itedpfowzxcmsx Acaek Reliable Layher system material, globally recognized for its quality. 👉 Availability & delivery: Large quantities in stock. Worldwide delivery possible. Collection is also possible. Separate quotations are made for large orders.

Condition: used, mileage: 6,38,926 km, power: 375 kW (509.86 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 14,790 kg, maximum load weight: 11,135 kg, overall weight: 26,000 kg, axle configuration: 3 axles, wheelbase: 4,300 mm, brakes: retarder, gearing type: mechanical, emission class: euro6, suspension: steel-air, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, fog lights, navigation system, onboard computer, parking heater, truck registration, | DAF XF 510 Timber Transport 6x4 | Crane Penz 12Z9.50, Year: 2018 | Load capacity: 4m: 2,670 kg, 6m: 1,550 kg, 8m: 1,370 kg, 9m: 1,180 kg | Short log body with 2 pairs of stakes | Lane change warning system, distance control cruise control | Engine brake and retarder, driver's seat with air suspension | Electric windows, EURO6, automatic transmission | Seat heating, auxiliary heater, air conditioning, auxiliary air conditioning, radio/CD | Differential lock, toolbox | Fog lights | ABS, ESP, payload = 11,035 kg | Tires: Front axle: 385/65R22.5, Rear: 315/80 R22.5 | Loading length approx. 6.00m | Wheelbase 4300mm/1400mm | Sale only to commercial businesses! | Subject to errors and prior sale. Itedpezmxp Ijfx Acajk

Condition: used, This listing is for a CS Cleaver Scientific S0100A-CLE-230V Vortex Mixer. Itedpfx Asxx Avcscajk The unit is in full working condition and is ready for immediate release. This Cleaver Scientific variable speed Vortex Mixer combines fast, efficient mixing with minimal vibration. Unlike other vortex mixers using elliptical orbits, the true circular orbit of the CSLVORTEX facilitates uniform sample-vortexing even at low speed. The CombiHead head, which is supplied as standard, accepts many different tube sizes, while the unique overmoulding technology used in its manufacture provides a sturdy plastic core with non-slip TPE that fits optional heads for microplates, microtubes, PCR strip tubes, 15ml and 50ml tubes and blood vials. CSLVORTEX may be used in touch or continuous mode, being activated by simply depressing the sample head and then stopped by releasing the pressure. An optimised counter balance system within the CSLVORTEX minimises vibration and movement of the unit during operation, whereas its lightweight construction and small footprint allow it to be readily transported and used in areas where space is restricted.

Condition: used, functionality: fully functional, Year of construction: 2022, machine/vehicle number: 2453428, load capacity: 750 kg, empty load weight: 13,400 kg, transport length: 4,950 mm, transport width: 2,460 mm, transport height: 3,000 mm, fuel type: electric, color: red, Equipment: UVV, all wheel drive, Technical Data Year of manufacture: 2022 Engine: Electric Working height: 22.00 m Platform height: 20.00 m Platform extension: 2.70 m Platform dimensions (L x W): 4.85 m x 2.25 m Overall dimensions (L x W x H): 4.95 m x 2.46 m x 3.86 m Iodpfxsyqyzzj Acajtk Load capacity: 750 kg Load capacity (extended): 750 kg Max. persons: 4 Driving speed: 0.4 - 5.0 km/h Drive system: 4 x 32 VAC / 3.3 kW Lifting system: 2 x 48 VDC / 10.0 kW Climbing ability: 40% Weight: 4,300 kg General signs of use, fully functional, UVV certified

Condition: used, mileage: 6,76,738 km, power: 552 kW (750.51 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 15,500 kg, maximum load weight: 10,425 kg, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 09/2026, brakes: retarder, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 2, loading space length: 5,100 mm, front tire size: 385/65/R22.5, rear tire size: 315/80/R22.5, maximum speed: 90 km/h, number of beds: 1, Equipment: ABS, air conditioning, cabin, compressed air brake, crane, cruise control, differential lock, onboard computer, steel tracks, truck registration, | VOLVO FH 16 with Penz 12Z crane, manufactured in 2016 | Double telescopic crane (2 extensions) | Retarder | Automatic transmission, EURO 6 | Air conditioning, multi-function steering wheel, cruise control | On-board computer | Trailer coupling | 15,500 kg unladen weight | Length of the timber loading platform: 5.10 m | Errors and prior sale excepted. Itedpey U Eb Nofx Acaek

Condition: used, power: 440 kW (598.23 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,000 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, retarder, traction control, - Adaptive cruise control - Heated mirrors - Leaf spring suspension - Differential lock - Low noise - Speed limiter - Intarder - Air conditioning - Air-suspended seats - Rear view camera - Power take-off (PTO) X TO GO „EUROMIX TO GO“ OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, DIRECTLY FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN URGENT NEED. (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: - Immediately deployable complete vehicles (concrete mixer/dump truck) - Immediate availability directly from the manufacturer - Superstructure, assembly, commercial vehicle - Best price-performance ratio - Financing options - Trade-in of your old vehicles MAN TGS 32.440 8x4 BB CH Euromix MTP EM 9 L MAN TGS 32.440 8x4 BB CH Year of manufacture: 2026 First registration: New 440 hp (324 kW) Euro 6e MAN D2676 diesel engine MAN TipMatic automatic transmission Permissible total weight 32,000 kg Wheelbase 2,505 mm Front axle track 1,795 mm Rear axle track 1,400 mm Leaf spring suspension front and rear (BB) Fuel tank 220 liters AdBlue tank 35 liters Cab color: Pure white RAL 9010 Cab Cab NN (narrow, medium length, normal height) Comfort cab mounting Steel bumper Tinted front and side windows Central locking Electrically adjustable and heated exterior mirrors Curb mirror on the right Front mirror Two vehicle keys Comfort features Air conditioning Air-suspended comfort driver's seat with armrest Passenger seat with storage box Multi-function steering wheel, adjustable in height and tilt Digital instrument cluster Professional 12.3 inches Exterior sun visor Sunblind on the driver's side Interior and reading lights Numerous storage compartments Safety & Assistance Systems Emergency braking assistant EBA Plus Turning assistant Traffic sign recognition Driver alertness system (Driver Monitoring System) Front Detection System Reversing Motion System ESP (Electronic Stability Program) ABS EBS ASR Cruise control Tire pressure monitoring system with temperature display Tire pressure monitoring for trailers Hill start assist MAN EasyStart LED daytime running lights Fog lights Automatic headlight switching Multimedia & Connectivity MAN Media System Advanced Navigation system Europe Online Traffic Itjdpfxszntqvj Acaok Smartphone integration (Apple CarPlay / Android Auto) MAN sound system Connectivity Board module Preparation for MAN Apps Digital tachograph Pirelli 315/80 R22.5 tires Disc brakes on the front axles Drum brakes on the rear axles Differential locks on the rear axles MAN EVBec high-performance engine brake EUROMIX MTP - Concrete mixer body EM 9 L Model: EM 9 L Nominal volume 9m³ ready-mix concrete Lightweight mixing drum Lightweight mixing drum made of H S450 material Lightweight mixing spiral made of HARDOX S500 material Gearbox, manufacturer ZF-P5300 Hydraulic pump, manufacturer Bosch Rexroth Hydraulic motor, manufacturer Bosch Rexroth