Used Triulzi Sy 2600 6.3.6 for sale (2,398)

Year of construction: 2007, condition: excellent (used), Horizontal glass washing machine TRIULZI SY 2600 6.3.6 Year of production: 2007 Maximum working width: 2600 mm Minimum glass size: 180 x 250 mm Glass thickness: 2 - 35 mm Working speed: 2 - 8 m/min (by inverter) Iijdpjx Ecwmofx Agysh Washing machine consists of: - inlet conveyor approx. 1000 mm long, - pre-washing, - 3 pairs of brushes (6 pcs.), - 3 pairs of air drying knifes (6 pcs.), - 3 water tanks (two with heating), - outlet conveyor approx. 1400 mm long. Total length approx.: 6900 mm Very good and clean condition As is Available immediately

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 22,900 W, overall weight: 6,550 kg, controller manufacturer: SIEMENS, controller model: 828D, number of slots in tool magazine: 12, number of axes: 6, This 6-axis DOOSAN PUMA 2600 SY II was manufactured in 2020. It features a maximum turning diameter of 376 mm and a turning length of 760 mm. The machine is equipped with a powerful spindle speed range of 20–4,000 rpm and a robust turret with 12 tool stations. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA 2600 SY II horizontal turning machine we have for sale. Contact us for further details. • Controlled axes: X, Z, Y, B, C1, C2 • Slant bed: 30°Travels and rapid traverse • B-axis (sub-spindle) travel: 830 mm • C1-axis: ±360° • C2-axis: ±360° • Rapid traverse (X / Z / Y / B): 30 / 30 / 10 / 30 m/minMain spindle • Spindle nose: ASA A2-8 • Hydraulic chuck: 254 mm, 3-jaw • Max. torque: 730 Nm • Spindle bore: 91 mm • Drawtube ID: 82 mm • Integrated built-in spindle motor • C1 positioning resolution: 0.001°Sub-spindle • Spindle nose: ASA A2-5 • Hydraulic chuck: 170 mm, 3-jaw • Speed range: 60–6,000 rpm • Motor power: 18.2 kW • Max. torque: 220 Nm • Spindle bore: 62 mm • Drawtube ID: 50 mm • Built-in motor • C2 positioning resolution: 0.001° • Part ejector stroke: 120 mmMachining capacity • Max. swing over bed: 780 mm • Max. swing at front door: 680 mm • Max. swing over carriage: 630 mm Iedpez N Dhtsfx Agyoih • Max. turning diameter: 376 mm • Max. turning length between centers: 760 mm • Max. bar capacity, main spindle: 81 mm • Max. bar capacity, sub-spindle: 49 mm • Off-center milling capacity (Y-axis): 105 mm (±52.5 mm) • Max. cantilever workpiece weight: 260 kg • Max. workpiece weight using sub-spindle: 520 kgTurret and driven tools • Turret type: BMT-65 • Turret indexing positions: 24 • Tool stations: 12 (all 12 driven) • Indexing time: 0.15 / 0.65 sec • Turning tool size: 25 × 25 mm • Boring tool capacity: Ø50 mm / Ø32 mm • Driven-tool speed: 50–5,000 rpm • Driven-tool power: 4.1 / 7.79 kW • Max. driven-tool torque: 79.8 Nm • ER-32 capacity: Ø3–20 mm • Rigid tapping: Yes Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter over cross slide: 630 mm, turning length: 760 mm, turning diameter: 376 mm, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, spindle motor power: 15 W, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,163 mm, total length: 3,560 mm, total width: 1,945 mm, turning diameter over bed slide: 780 mm, overall weight: 6,550 kg, bar passage: 81 mm, Equipment: documentation/manual, I am offering a Doosan Puma 2600 SY II CNC lathe, a high-productivity machine equipped with a Y-axis, main spindle, and sub-spindle, ideal for complete machining operations in a single setup. The machine is fitted with a bar feeder and numerous accessories, is fully operational, and can be seen running by appointment. The lathe is in excellent operating condition, regular maintenance has been performed, and it can be demonstrated in idle mode by appointment. Included accessories: . Top Automazioni bar feeder model X-Files S380SX . Chip conveyor . Tool presetting system Iiodpfxeymdt To Agyoh . Bellegrandi collet chucks on main and sub-spindle . Workpiece pick-off arm with conveyor belt . Static and driven tool holders

Condition: ready for operation (used), Year of construction: 2018, operating hours: 18,845 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 53 mm, travel distance Z-axis: 830 mm, spindle motor power: 33,000 W, controller manufacturer: SIEMENS, controller model: 828D, number of axes: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018, designed for precision in horizontal turning. Ideal for complex machining tasks, this machine ensures robust performance and durability. If you are looking to get high quality turning capabilities consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for more information. Additional equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • Machine includes a rotary indexing magazine • Machine includes a gantry robot Machine Benefits Iodpfeyr R A Eox Agysih Qualitative Machine Benefits • Tool change time: 1. 0 second • Max speed (station): 5000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump capacity: 1. 5 kw Technical Machine Benefits • Max. Turning diameter over bed: 780 mm • Max. Turning diameter over slide: 630 mm • Max. Turning length: 760 mm • Main spindle torque: 719 nm • Spindle mount (main): a2 #8 • Sub spindle speed: 6000 rpm • Sub spindle power (30 min): 18. 2 kw • Sub spindle torque: 220 nm • Spindle mount (sub): a2 #5 • Number of stations: 24 (12 driven) Extra Information Machine still under power

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Iisdpjzrmiaefx Agyjh

Condition: excellent (used), Year of construction: 2010, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees, 12 station turret , 22KW Motor, Iedoz Rzzajpfx Agyjih Main spindle 4,000 rpm, sub-spindle 4,500 rpm, 3 jaw chuck, parts catcher, toolsetter,

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 780 mm, turning diameter: 376 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, rotational speed (max.): 4,000 rpm, Equipment: rotational speed infinitely variable, 6-axis CNC lathe with sub-spindle, driven tools and Y axis Iedpfx Astvl U Hogyeih

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, turning length: 1,073 mm, turning diameter: 380 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 255 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 1,100 mm, bar passage: 81 mm, total height: 1,960 mm, total length: 3,805 mm, total width: 2,100 mm, overall weight: 5,800 kg, Equipment: documentation/manual, Hyundai WIA SE2600LSY is a high-performance CNC turning centre equipped with a Y-axis and sub-spindle for complete machining of complex components in a single setup. The machine features a FANUC i-Series control, BMT55 live tooling with speeds up to 6,000 rpm, and a maximum turning diameter of 380 mm. It is equipped with a 10" main spindle and 6" sub-spindle, providing excellent flexibility for both turning and milling operations. Optional equipment included: Automatic tool setter 15 bar high-pressure coolant pump Chip conveyor with chip container Iedsz Izngjpfx Agysih Bar feeder interface Parts catcher Standard set of tool holders, including 2 + 2 live tool holders

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, ABB Robotics IRB 2600-12/1.85 IRC M2004 robot, complete Controller: IRC5 M2004 Number of axes: 6 Iedpez Rlg Hofx Agyjih Max. payload: 12 kg Max. working range: 1850 mm Year of manufacture: 12/2013 Scope of delivery: Robot, controller, cables, teach panel, circuit diagrams Used item – shows normal signs of wear. Further details, article numbers and images available upon request. Two weeks start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Price is per robot. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please provide country, city and postal code. Freight costs on request – please provide the delivery address.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 86966, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, total height: 3,850 mm, total length: 8,350 mm, total width: 4,200 mm, overall weight: 35,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, spindle motor power: 57 W, spindle nose: SK50, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, For sale is an AXA VHC50-2600 XTS, including a KUKA robotic system with conveyor belts (partial sale possible). An spare parts package worth approximately €180,000 is also included. The price is including delivery to your location – within Germany. Iiedpfxsz S T Rco Agyeh For more detailed technical specifications, please see the attached documents. An inspection can be arranged at any time. Installation and recommissioning can also be organized.

Condition: used, Year of construction: 2009, functionality: fully functional, The machine is disassembled and stored in a warehouse. Photos of the modules are available upon request. Please submit reasonable offers. We have a Kern 2600 machine for sale; below is information about the envelope machine offered for sale: Equipped with Mail Factory KVS Inserting and Sealing Module K990 Cutter – NOT INCLUDED DE Direct Entry Module x 1 unit LM Spacer Module x 1 unit FSH Folding Module x 1 unit BFGD Module x 2 units Transport Module x 1 unit Output Bin x 4 units Ijdpfxoy Eym Ue Agyoih VRO with conveyor Additionally included are modules from another machine: EFQR Single Sheet Feeder right x 1 unit (One motor mounting plate is missing; the rest is 100% complete) SIGR Continuous Forms Cutter right with K2600 Options Station x 1 unit BFGD Module (only for parts, incomplete, without covers) x 1 unit LM Spacer Module (functional, fully complete) x 1 unit VRO with conveyor (functional, fully complete) x 1 unit

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB 2600-12/1.85 Type B + Trackmotion 2.9 meters, complete, like new, DTC 7 hours, 2019 Isdez Tacnspfx Agyeih DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar loader. * 12-station turret, all stations motorized. * Y-axis travel: ±60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct-drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N·m. * Motors without belts or gearboxes. Iiedpez Sx N Rjfx Agyeh * Main spindle size: A2-8. * Sub-spindle size: A2-6. * Bar capacity: 80 mm. * 250 mm Kitagawa B-210 main spindle chuck with metric system. * 210 mm Kitagawa B-208 sub-spindle chuck with metric system. * Prismatic guides on all axes. * Main spindle speed: 4,000 rpm. * Motorized tool speed: 6,000 rpm. * Daikin oil cooler for both spindles. * Mapps 4 conversational automatic programming system. * Automatic force control and tool wear monitoring. * Rapid traverse speed: 30 m/min on the X and Z axes. * Turret indexing time: 0.2 seconds. * Two Renishaw arms for automatic tool measurement. * Communication ports via USB, PCMCIA card, and RS-232. * Installation interface for bar feeder. * Automatic workpiece collector. * Dual foot pedal for independent opening and closing of the main spindle and sub-spindle. * Side-mounted hinged chip extractor with integrated particle filters. * Extensive selection of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical schematics, programming guide, and operating manual. * Weight: 6,200 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.

Condition: used, Year of construction: 2004, machine/vehicle number: 2161, For sale is a Schüco LKF 2600 machine for processing aluminum and steel profiles, manufactured in 2004. The machine is particularly suitable for the efficient processing of long profile lengths. The 3-sided processing over a processing length of 2,600 mm allows complex milling patterns to be incorporated into door and frame profiles without having to remove the profile from the clamping device. The pneumatic profile clamping system with four adjustable clamping cylinders ensures secure fixation of the profiles during processing. The pneumatic 180° rotation allows the profile to be conveniently positioned for processing the opposite side. A special advantage of the machine is the pneumatic rotation of the clamped profile by 180°. This allows processing on multiple sides to be carried out comfortably and precisely. Isdpfx Agoz Spttjyoih Technical data: • 3-sided processing with a processing length of 2600 mm. This allows the operator to mill the milling pattern, e.g., of a 5-point locking mechanism, into a door profile without having to remove the profile from its clamping device. • During processing, the speed of the milling cutter can be adjusted to the profile. • 1 vertical milling spindle • Pneumatic rotation of the profile by 180° • All intermediate angles can be adjusted via a clamping device • Pneumatic profile clamping with 4 adjustable horizontal clamping cylinders • The working head is lowered manually and pneumatically fixed at the working height • Copying templates along the entire length of the machine

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B robot, fully equipped with options. Iijdsz Tac Uspfx Agyjh DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two renowned robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Iiedpfezwvv Tsx Agyeh Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, ABB Robotics IRB 2600 20/1.65 IRC5 M2004 robot, Multimove 12-axis Number of axes: 12 Max. payload: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of supply: Robot mechanics, Multimove 12-axis control cabinet, teach pendant, connection cables Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected on request. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city and postal code. Freight costs on request – please specify delivery address. Ijdezmq S Iepfx Agysih

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, ABB Robotics IRB 2600 20/1.65 IRC5 M2004 robot, only mechanics Number of axes: 6 Max. payload: 20 kg Max. working range: 1650 mm Year of manufacture: 9/2014 Scope of delivery: Robot mechanics Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks start-up guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Iodpfx Aszmuc Dogyjih Free loading / ex works. The stated amount is net and applies per item. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. The maximum printing format is 1150 x 990 mm. Iedjzq Eg Uspfx Agyeih

Condition: like new (used), Year of construction: 2018, DOOSAN GT 2600 M LATHE YEAR 2018 ONLY: 652 CUTTING HOURS MAX. ROTATING DIAMETER: 630 mm MAX. MACHINABLE LENGTH: 658 mm MAX. MACHINABLE DIAMETER: 460 mm BAR FEEDER CAPACITY: 82 mm SPINDLE SPEED: 35 - 3,500 RPM SPINDLE MOUNT: ASA - 8 TRAVEL: X: 265 mm Z: 680 mm MOTORIZED TURRET Iisdpfoz D Eq Rex Agyeh TAILSTOCK CHIP CONVEYOR TOOL PRESETTING WEIGHT: 5,500 KG

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, ABB Robotics IRB 2600 20/1.65 Foundry Plus IRC5 M2004 robot Iisdjzmq Rkjpfx Agysh Number of axes: 6 Max. payload: 20 kg Max. working range: 1650 mm Year of manufacture: 2012 Scope of delivery: Robot, control cabinet, teach panel, connecting cables Used item – shows normal signs of wear. Further details, article numbers, and images available upon request. Two-week commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT amount shown. Collection on site at 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the number of items, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – please specify country, city, and postal code. Freight costs available upon request – please specify delivery address.

Condition: used, Year of construction: 2023, operating hours: 647 h, functionality: fully functional, CNC lathe Hyundai WIA HD2600 – Year of manufacture 2023 – Top condition For sale is a CNC lathe Hyundai WIA HD2600 from 2023. Technical data: Manufacturer: Hyundai WIA Model: HD2600 Year of manufacture: 2023 Operating hours: only 647 h Condition: very good condition, almost new Chuck: SCHUNK Ø 400 mm Sale can include the chuck upon request The machine has been used very little and is in excellent technical and optical condition. It is ready for immediate use and can be inspected by appointment. Advantages: Very low operating hours Powerful and precise CNC lathe High-quality SCHUNK chuck Ø 400 mm Immediately available Isdpfozdcinsx Agyeih We are happy to provide you with further information, technical details or a customized offer. Parameter Value Max. turning diameter 460 mm Max. turning length 659 mm Diameter of rotation over bed 630 mm Diameter of rotation over slide 460 mm Spindle bore 91 mm Max. bar diameter 80–81 mm Spindle speed 3,500 rpm Spindle power 26 / 18.5 kW Spindle torque 734 Nm Spindle nose A2-8 X-axis travel 265 mm Z-axis travel 680 mm Rapid traverse X/Z 24 / 30 m/min Turret 10 stations Tool holder 25 mm / Ø50 mm Tailstock MK5 (Morse taper 5) Machine weight approx. 5,800 kg

Condition: like new (used), Year of construction: 2026, operating hours: 50 h, functionality: fully functional, machine/vehicle number: YC-2600, Toilet roll rewinding machine toilet roll cutting machine Isdpoz Ixyyjfx Agyjih toilet roll packing machine air compressor one jumbo paper roll 1368kg more than 2000 paper cone free full package only €37000

Condition: excellent (used), Year of construction: 2024, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 4803, type of input current: AC, overall weight: 2,200 kg, total width: 2,600 mm, total length: 2,600 mm, total height: 2,300 mm, input voltage: 400 V, power: 5.5 kW (7.48 HP), input frequency: 50 Hz, A nearly new GKM KTS 2600 DS with less than 500 operating hours. This is a tumbling screen machine with a patented adjustment for the three-dimensional movement, allowing the dwell time for each product on the screens to be individually adjusted. The main shaft is driven by an electric motor and V-belt. Technical data: • Tumbling screen machine with a 2600 mm diameter and 5 screen decks • Inlet DN 300, outlet DN 300, stainless steel Iisdpfszl U Uwsx Agyeh • Screen lifter for easy removal • Approximately 4000 silicon balls for screen cleaning for difficult materials • Motor 5.5 kW, 400 VAC, 50 Hz • ATEX EXII-/3D Ex h IIIB T155°C design – Zone 20 inside, Zone 22 outside • Outlets are individually adjustable and adaptable • Installed screen sizes: 2 mm, 1 mm, 0.56 mm, 0.4 mm, 0.32 mm • Spare screens: 0.63 mm, 0.71 mm, 1.5 mm The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Technical data, prices, and images can be found in the PDF files attached. Iisdpfxozuddys Agyjh