Used Trumpf Hl556D for sale (429)

Condition: good (used), Trumpf HAAS Type: HAAS Laser HL556D Kdjdpfx Acsc Tk Iyjcol Laser light wavelength: 1064nm Minimum power: 5 W Maximum power regulated: 550 W Beam parameter product: 25 mm-mrgd External dimensions: width 1250mm, height 1580, depth 720m Power cable with plug: Length: 5.5 m Plug: CEE round plug, 5-pin 63A-6h Cooling water hoses: Connections for supply and return: 1 inch The hoses are plugged onto the connections and sealed with 2 hose clamps each. Electrical interfaces: Serial interfaces for service purposes Ethernet interface for operating PC Interface of the analog input card ASV interfaces for safety circuits Output for measured values of the laser power Interface for connecting the control panel Emergency stop interface Electrical connection values: Mains 20-01-37-00 400 V ± 10%, 3P + PE, 50 Hz 20-01-38-00400 V ± 10%, 3P + PE, 60 Hz Scope of delivery: (laser system, laser head and replacement cable ...) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 14,434 h, controller model: Siemens Sinumerik 840D, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, Equipment: safety light barrier, TECHNICAL DETAILS Laser power: 4,000 W Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Sheet metal thickness, steel (max.): 20 mm Sheet metal thickness, stainless steel (max.): 15 mm MACHINE DETAILS Control model: Siemens Sinumerik 840D Beam-on hours: 14,434 h Power-on hours: 39,875 h EQUIPMENT Closed machine frame with integrated laser unit Laser unit: CO2 laser TFL 3200 high-frequency unit, maintenance-free turbo-radial blower, mirror telescope Automatic pallet changer Longitudinal conveyor belt for small parts/waste Drives: Maintenance-free three-phase AC servo motors Additional high-dynamic Xp-axis Cutting head quick-change device Laser cutting head with 5" lens and 7.5" lens Cutting gas pressure setting, programmable APC capacitive height control and process control Automatic focus position adjustment AutoLas Plus Laser power control Positioning laser diode HI-LAS high-pressure cutting Fast processing with SprintLAS ContourLAS for producing smaller holes PMS plasma sensor Automatic sheet metal edge detection Programmable power cycles Compressed air cutting PCS Process Control System Kdedpfx Aey Rk Uyoccsl Microweld Spraying device for safe thick sheet metal processing Automatic shutdown Work area lighting Workshop programming ToPs 100 lite Control: Siemens Sinumerik 840D Open control system based on PC, easy operation, online help, integrated e-shop, diagnostic function, maintenance log, technology data, teleservice Safety equipment: Multi-beam light barriers, beam guidance completely encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 3,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, table length: 3,000 mm, table width: 1,500 mm, TRUMPF TruLaser 5030 3kW Fiber with LiftMaster! Laser head replaced in 2024 TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Cutting heads: 1 Sheet thickness mild steel: 20 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 15 mm Sheet thickness copper: 4 mm Sheet thickness brass: 3 mm Laser power: 3,000 W Laser model: TruDisk3001 (4C) MACHINE DETAILS Control type: CNC Last documented maintenance: 10-12 Sept 2025 Operating hours (as of 09/2025): 53,082 h (currently approx. 54,000 h) Dimensions & Weight Kdodpfx Acsy Rkz Hscjl Space requirement: 9,300 x 4,700 x 2,200 mm Machine weight: 12,700 kg Electrical connection: 40 kVA / 80 A Electrical power consumption: 23 - 33 kW EQUIPMENT CE documentation and manuals LiftMaster Automatic nozzle changer Extraction system Operating manual Chiller + extraction system Compressor not included Note: Transporting the machine requires 1 standard truck and 1 truck with a width of 3m.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 70,119 h, machine/vehicle number: A0111A0021, controller model: TruControl 1000, laser source model: Festkörperlaser, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,270 mm, Equipment: CE marking, safety light barrier, TECHNICAL DETAILS Working area: 2,500 x 1,270 mm Parts flap: 300 x 500 mm Clamping claws: 2 units Laser Solid-state laser: TruDisk 3001 LLK outlets: 1 unit Fiber optic cable: 10 m Cutting head Lens focal length: 200 mm MACHINE DETAILS Kodjy R Uatopfx Accedl Operating hours Laser on-time: 70,119 h Total operating hours: 73,936 h Control Laser control: TruControl 1000 Screen size: 15" EQUIPMENT Robust, easily accessible C-frame Precision linear guide system for high-accuracy processing Linear magazine including 2 clamping claws Maintenance-free drives Repositioning device with programmable hold-down Brush tables Good parts container Chip bin Enclosed beam guidance via fiber optic cable ContourLine FocusLine NitroLine Chiller unit Diode-pumped excitation for long service life Upgradeable for up to 3 additional LLK outlets Quick-change cutting head system ControlLine Electro-hydraulic punching head Programmable hold-down plate Tool length compensation Punch lubrication spray Slug extraction system Open control based on Bosch PNC-P Control panel with TFT color display Teleservice via Internet Automatic shutdown USB port Network connection CE marking Multi-beam light barriers Laser source safety monitoring system Quick disconnect for hydraulics Scatter radiation protection Additional LLK outlet for operation with Trumpf system MultiTool function MultiBend function Thread forming function Marking / fast embossing function Roller and deburring technology function Softpunch function Adaptive stroke calibration Spray lubrication for die Additional clamping claw Individually opening clamping claws Height-adjustable clamping claws Automatic clamping claw closing Repositioning cylinder with height-adjustable pressure pieces Sensor for parts chute Loading/unloading aid for brush tables Vibration-damped foundation Chip conveyor with tilting bin Liftable brush segment Parts conveyor belt

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,691 h, machine/vehicle number: A0261G0093, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 8,000 W, sheet thickness (max.): 32 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 115 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area X-axis: 6,000 mm Working area Y-axis: 2,500 mm Working area Z-axis: 115 mm Kjdey Iz N Ajpfx Accedl Maximum sheet thickness, mild steel: 32 mm Maximum sheet thickness, stainless steel: 30 mm Maximum sheet thickness, aluminum: 25 mm Maximum sheet thickness, copper: 10 mm Maximum sheet thickness, brass: 10 mm Maximum workpiece weight, pallet changer: 3,300 kg Maximum workpiece weight, both pallets: 5,700 kg Max. speed: 140 m/min MACHINE DETAILS Control unit: Siemens Sinumerik 840D SL Operating system: Windows 10 IoT Laser power: 8,000 W Laser type: TruDisk 8001 Average power consumption: 17 kW Compressed air: 5 m³/h Dimensions (L x W x H): 16,770 x 7,158 x 2,130 mm Operating hours NC on-hours: 17,501 h Laser on-hours: 4,691 h EQUIPMENT Incline conveyor Fully enclosed machine frame Viewing window Automatic pallet changer Left-side installation Cooling unit Dust cover for control cabinet Working area lighting Process monitoring cameras Multi-sheet processing Positioning laser DetectLine BrightLine Smart Collision Prevention Performance Package Melt Cutting Copper cutting package Brass cutting package Highspeed cutting package Drop&Cut

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, operating hours: 13,817 h, controller model: Siemens Sinumerik 840 D, laser power: 3,200 W, punching force: 22 t, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,280 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 3,200 W Laser model: High-frequency excited CO2 laser TLF 3200W Press force: 22 t X-axis travel: 2,585 mm Y-axis travel: 1,280 mm MACHINE DETAILS Control system: Siemens Sinumerik 840 D Laser beam hours: 13,817 h Laser on hours: 71,637 h Operating hours: 80,188 h EQUIPMENT - Sturdy C-frame - Linear guide with integrated magazine - Maintenance-free three-phase servo motors - Programmable hold-down for repositioning - Sensor-monitored part chute 500x500 mm for punching and laser station - Ejector cylinder at the laser chute - Programmable cutting gas pressure control - Laser cutting head: 5'' lens, quick-change system, height control Kjdpfx Ajy Iz H Ioccedl - Multi-beam light barriers - Quick shut-off hydraulics - Extraction system - Compact dust extractor - Protective device against stray radiation at the cutting head - Brush table - Sign function / rapid beading - Softpunch - Small parts blow-out device - Repositioning cylinder - Warp detection - Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 33,749 h, machine/vehicle number: A1240A0497, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS Travel Range X-Axis: 4,000 mm Travel Range Y-Axis: 2,000 mm Travel Range Z-Axis: 115 mm Maximum Workpiece Weight: 1,700 kg Maximum Speed: 140 m/min Positioning Accuracy Positioning Deviation Pa: 0.1 mm Average Positioning Accuracy Ps: 0.03 mm Laser Data Maximum Laser Power: 4,000 W Wavelength: 10.6 µm Sheet Thickness Mild Steel: 25 mm Sheet Thickness Stainless Steel: 15 mm Sheet Thickness Aluminum: 10 mm MACHINE DETAILS Control: CNC Sinumerik 840D SL Total Power Consumption: 11–65 kW Beam-On Time: 19,152 h (as of 28.08.2025) Laser-On Time: 33,749 h (as of 28.08.2025) Dimensions & Weight Kdodpfxoy Rqnge Accel Dimensions (L x W x H): 12,000 x 5,300 x 2,200 mm Machine Weight: 14,000 kg EQUIPMENT Automatic longitudinal pallet changer Longitudinal chip conveyor Oil vaporizer PierceLine FocusLine NitroLine PlasmaLine TruFlow 4000 CO2 laser with optimized standby mode Maintenance-free radial turbine High frequency excitation TASC laser control Laser power control Laser logbook LensLine with status monitoring Cutting head with 250 mm focal length Quick-change cutting head device (UTI) ControlLine Lens with RFID chip ContourLine Micro-welding FastLine AdjustLine Internet remote services FlyLine Easy workshop programming

Condition: excellent (used), Year of construction: 2008, Trumpf TruBend 5085 Ksdpfxsyxdv Ho Accjdl Manufacturer: TRUMPF Model: TruBend 5085 Year of manufacture: 2008 Product number: F1025K Serial number: B0503A0302 Maximum press force: 85 tons Stroke: 540 mm Clearance: 445 mm Weight: 8,600 kg Bending length: 2,720 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 69,301 h, control type: CNC control, degree of automation: automatic, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser source model: Truflow3200, laser hours: 41,349 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 140 m/min, feed rate Y-axis: 140 m/min, repeat accuracy: 0.01 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: nozzle changer, Trumpf TruLaser 3030 (L20) Laser Cutting Machine Year of manufacture: 2013 Working area: 3000 × 1500 × 115 mm Rated laser power: 3,200 W Control system: Siemens Sinumerik 840 D SL Maximum sheet thickness: Steel (St): up to 20 mm Stainless steel (VA): up to 12 mm Aluminum (Al): up to 8 mm Maximum traverse speed: 140 m/min Positioning accuracy: 0.01 mm Dimensions: Length: 9,300 mm Width: 4,600 mm Height: 2,200 mm Kdjdpfx Acsxmpn Uscsl Weight: 12,000 kg Equipment: Automatic nozzle changer, voltage stabilizers included

Condition: good (used), functionality: fully functional, Year of construction: 2013, AVAILABLE FROM October 2026 Punching force: 220 kN Laser power in watts: 4000 Travel range - x: 2500 mm Travel range - y: 1250 mm Cutting capacity in structural steel: 8 mm Cutting capacity in stainless steel: 8 mm Cutting capacity in aluminum: 6 mm Workpiece weight: 280 kg Machine weight approx.: 24,000 kg Dimensions: 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Traveling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Slag cone detection Kdodpfjy Tm Dpex Accsl TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control etc.

Condition: excellent (used), Year of construction: 2017, TruBend 5130, including Toolmaster, manufactured in 2017. 130 tons, 3 meters. Kdodpoy Tmnhefx Accol

Condition: good (used), functionality: fully functional, Year of construction: 2000, Punching force, max.: 220 kN Sheet metal length: 2500 mm Kedey Tl U Hspfx Accedl Sheet metal width: 1250 mm Laser power in watts: 3000 Sheet metal thickness: 8 mm Max. workpiece weight: 230 kg Machine weight, approx.: 23,000 kg Operating hours: - Laser on-time: 87,583 h - Beam on-time: 13,564 h

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency For sale is a used TRUMPF TruLaser 5030 fiber from 2014. According to the previous owner, the machine was in continuous productive use until 2025 and operated without any known problems. Subsequently, as part of an insolvency, the system was shut down for approximately one year and no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. The main power cables were roughly cut by an electrician during disconnection (typical in such a case). However, these cables can be reordered or replaced professionally. Ideal machine for a buyer who wants to refurbish, clean, connect, and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Kedpfxey Tmcxe Accsdl Travel distance X-axis: 3,000 mm Travel distance Y-axis: 1,500 mm Travel distance Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for the system Universal cutting unit Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine stood for approx. one year due to insolvency Connection cables to the main power supply are cut and must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before re-commissioning Machine documentation is not completely available according to the expert opinion Positive points to mention Last service according to documentation in 2021 Cutting unit was renewed in 04/2021 Machine was in operation until 2025 Very interesting basis for in-house refurbishment A fantastic special price is possible Sale Location: Germany Availability: immediate Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Trumpf TruPunch 2020 Ksdpfsy S Adpsx Accedl

Condition: ready for operation (used), Year of construction: 2001, number of axes: 5, This 5-axis TRUMPF TrumaBend V85 press brake was manufactured in 2001. It features an electro-hydraulic ram drive, CNC backgauge system, and a modern protective cover. The machine includes a 4-axis back gauge system and both hydraulic upper and lower tool clamping. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85 machine we have for sale. Contact us for more information about this machine. Additional equipment • Top drive concept in two-cylinder design y1/y2 • Electro-hydraulic ram drive with proportional valve technology • Ram travel measuring system with spring deflection compensation via glass scales • Modern block hydraulics • Cnc backgauge system • Safe finger adjustment from the front • Self-centring, manual, hardened upper tool holder for vertical tool change • Hardened, manual lower tool holder • Programme-controlled lower tool displacement (i-axis) for 2 positions • Modern protective cover Machine Benefits Technical Machine Benefits Kdodpfx Acox D Nkdscjl • Oil cooler • Working width 2. 000mm Extra Information Special Equipment: Back gauge system 4 axes (X, R, Z1, Z2) Hydraulic and hardened upper tool clamping (Wila system) Hydraulic lower tool clamping (Wila system) CNC crowning BendGuard safety device 2 pcs. Support brackets Network No tools included

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 120 t, stroke length: 200 mm, table length: 3,110 mm, overall weight: 8,300 kg, Manufactured by Trumpf (Germany) Year of manufacture 2006 Control: DELEM DA-65TW Bending capacity, ton 120 Max plate length, mm 3110 Adjustable stroke, mm 200 Power required, kW 11 Machine dimensions, mm 3600 x 1750 x 2330 Machine weight, kg 8300 Ksdpsy S R Upefx Accedl The press brake is fully complete, under power, equipped with 6 axis and tools.

Condition: excellent (used), Year of construction: 2014, 3 kW resonator power Kdsdpfxeyxc Afs Accsl

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 Kdodpfx Acey R Sc Escol :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Kdedey Shc Djpfx Accjl

Condition: good (used), Year of construction: 2012, TruBend 5050 Kdedpfx Aey Shcdeccjl

Condition: good (used), functionality: fully functional, Year of construction: 2014, Sheet width: 3000 mm Sheet length: 1500 mm Sheet thickness: 8 mm Ksdpfx Aoy Sak Tjccodl Workpiece weight: 200 kg Maximum punching force: 220 kN Total power requirement: 9.5 kW Approx. dimensions: 7395 x 6540 x 2072 mm Equipment: - Sheetmaster - Operating hours: 65,000 h

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. Kodpeyhnukofx Accsdl This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: used, Year of construction: 2020, operating hours: 31,623 h, laser power: 4,000 W, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2026, Machine Configuration: Standard Equipment: Machine - Working area: 3000 × 1500 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status light - Ambient operating temperature 5 to 40 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting unit - Single-head cutting strategy - Universal cutting unit with adaptive lens system - Protective glass - Online condition monitoring of protective glass Control - Fast reproduction - SINUMERIK 840D SL control - Ergonomic control panel with 21.5″ wide-screen multi-touch color display - Integrated technology data - Auto shut-off - Programmable selection of cutting gas/pressure - Microweld - Remote support interface - Production planning Kdodpfx Acey Sivfscel - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine - PierceLine - Copper cutting package - Brass cutting package Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Light barriers - Multi-chamber extraction system - Machine paneling with certified viewing window, right door Extended Standard Equipment - Compact dust extractor - Support slats made of construction steel - Network installation via remote support Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 4001 with 1 LLK output Additional Machine Functions - Drop&Cut - Integrated camera 1 for process monitoring Additional Cutting Packages - Highspeed Eco cutting package Extended Machine Equipment - Dust protection for device panel Data transmission - Wireless Operation Point Availability: approx. 6–8 weeks after receipt of order, at the earliest end of June 2026 Price: on request Current location: TRUMPF Reconditioning Facility Netherlands The machine is currently undergoing reconditioning!

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, pressing force: 37 t, number of axes: 6, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: TRUMPF TASC 6000 (15") • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front Kdodpfx Aox D D Hyoccsl • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: good (used), Year of construction: 2014, functionality: fully functional, laser power: 4,000 W, laser type: fiber laser, TruLaser Robot 5020 LW01 4000 Watt X x Y x Z Working Area max (mm): 2000 x 1000 x 700 Laser Power: 4000 Watt Operating Hours: 19,975 h Laser Beam On: 10,353 h Standard Equipment Machine: - KUKA Robot KR30 HA (High Accuracy) - Robot working area (per layout) - Software package Laser Robot Tech - Paper documentation - Basic media supply kit - Robot media guidance - Robot height extension Kedpfjy Saulsx Accjdl - KTL alignment set - Mobile operating trolley for KCP - Compact dust extractor 3000 m³/h, plate filter, extinguishing unit - Laser safety cabin - Extraction piping - Laser safety window - Cable ducts Robot: - Magnetic coupling Workpiece Positioner - DKP400.1 rotary/tilt positioner - DKP 400.1 energy supply - DKP 400.1 actuator/sensor interface - 3D clamping plate 800 x 100 mm, Demmeler system - Twin-station turntable - Active safety system for partition wall, turntable Euro - Energy supply for turntable - Actuator/sensor interface turntable - Flexible fixture holder turntable - Modular clamping system - Stand for modular clamping system incl. counterholder Extended Laser Equipment - TruDisk 4002 - Cooler for TruDisk 4002 - 30 m fiber optic cable Technology Package - Laser welding technology package - Motorized focus adjustment option - TeachLine option - Gas supply block for shielding gas Argon Laser Safety Cabin - Automatic sliding door - Video surveillance with camera