Used Ugo Basile 7025 for sale (76)

Condition: good (used), The 7025 Rodent Ventilator is a positive pressure pump (according to Starling's Ventilator method), designed for use with guinea pigs, rats, mice and small birds. The 7025 drive consists of a variable speed geared motor linked by a novel variable stroke mechanism to easily interchangeable cylinder/piston assemblies. Their precisely regulated geared-motor speed is controlled by an electronic feedback-controlled drive, thus providing the most accurate and reliable stroke rate control of any respirator available. Electronic noise broadcasting is negligible, and the pumps are also quiet to the ear. The unique linkage mechanism insures that: the piston almost touches the cylinder end with each stroke, regardless of the pre-set volume, thus insuring all air taken into the pump is expelled with each stroke. The volume, clearly indicated on a stationary dial, is adjustable by means of a knob while the pumpis either running or at standstill. The reciprocating motion is generated, adjusted and transmitted to the piston by rods and articulatedjoints only. The lack of sliding friction leads to: practically no wear and no backlash, hence silent operation and exact stroke reproducibility. The 7025 can be equipped with 5, 10 or 30ml cylinder/piston assembly. The operation of the ventilator may be "paused" by an external TTL logic signal (optional feature). Synchronised START/STOP feature available as optional (series 7125). The picture features a Rodent Ventilator 7025, together with the 6025 for Cat/Rabbit Codpfx Afjh N D Ile Asrd Good working condition. Please check out our other listings as well.

Year of construction: 2008, condition: ready for operation (used), A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible. Cjdpfxjwynv Hj Af Aord

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,145 mm, mast type: triplex, construction height: 2,340 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,066 kg, drive type: Treibgas, construction width: 1,240 mm, LPG forklift Load center of gravity: 500 Fork width: 120 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrodynamic Condition: As good as new Technical condition: New Front tires Type: Non Marking Front tires Size: 28x9-15 Front tires Condition: 80 - 100% Cedpfot Ddzwjx Af Ajrd Rear tires Type: Non Marking Rear tires Size: 6.50-10 Rear tires Condition: 80 - 100% Description: Full cab with heating, work lights front + rear, BluSpot front + rear, 3rd + 4th valve to fork carriage, rotating beacon, indicators, reversing camera, hand lever load guard, sideshift, 3rd valve, 4th valve, rear working lights, front working lights, heating, load guard, full cab, safety light, non-creeping tires, interior mirror, rotating beacon, windscreen wiper, LED, seat,

Condition: new, functionality: fully functional, Year of construction: 2022, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,050 mm, fuel type: electric, mast type: triplex, construction height: 2,210 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,104 kg, drive type: Elektro, construction width: 1,265 mm, Electric 4-wheel forklift Load centre: 500 mm Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Codpfxjt Ddzdj Af Aerd Condition: New machine Technical condition: New Front tyres type: Non-marking Front tyres size: 28x9-15 Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres size: 18x7-8 Rear tyres condition: 80 - 100% Battery voltage: 80V Battery capacity: 500Ah Battery manufacturer: GBD Battery type: PzS Battery year of manufacture: 2025 Battery condition: New Description: Overhead guard with front windscreen, front and rear working lights, BlueSpot front and rear, 3rd and 4th valve up to fork carriage, fork positioner, rotating beacon, manual levers, side shift, fork positioner, Cascade fork positioner with side shift, opening range: IK-IK 60-735 mm, 3rd valve, 4th valve, rear working light, front working light, front windscreen, load backrest, full free lift, safety light, non-marking tyres, interior mirror, rotating beacon, windscreen wiper, LED, seat,

Condition: used, Year of construction: 2022, operating hours: 13 h, load capacity: 1,600 kg, lifting height: 4,600 mm, free lift: 1,545 mm, mast type: triplex, construction height: 2,112 mm, fork length: 1,150 mm, empty load weight: 1,285 kg, drive type: Elektro, construction width: 820 mm, High lift truck Load center of gravity: 600 Fork width: 180 mm Fork thickness: 60 mm Mast type: Triplex Condition: As good as new Crsdpfx Ajt Ddt Hef Aed Technical condition: New Front tires type: Polyurethane Front tires Condition: 80 - 100% Rear tires Type: Polyurethane Rear tires Condition: 80 - 100% Battery Volt: 24V Battery Ah: 200Ah Battery manufacturer: GBD Battery type: PzS Battery year of manufacture: 2023 Battery condition: 80 - 100% Non-creeping tires,

Condition: excellent (used), functionality: fully functional, engine power: 2.2 kW table length: 290 cm table width: 80 cm Crjdpfx Aezdyhmef Asd electric table adjustment belt width: 150 mm power supply: 380 V

Condition: excellent (used), Hugo Beck SL 412/25 Shrink tunnel Hugo Beck Shrink tunnel Csdpfx Aop H T Iuef Aerd SL 412/25 380 V 6/9 KW power Air circulation fan Cooling fan 2 x control heating 1 x basic heating 1 x additional heating with chain transport Dimensions Tunnel length: 120 cm Machine: LxWxH = 166x64x26cm You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, electrical drives: Siemens Simoreg DC converter Codpfx Afedl Anbj Ajrd SIEMENS Simoreg 6RA7025-6FV62-0 DC electric drive, digital automatic control (converter) nominal power, kW 28.8 Input: 3AC 460V - 50A 50/60HZ Output(DC Rating): DC+-480V 60A Output(US Rating): DC+-500V 30A Field Supply: Input: 2AC 460V 10A 50/60Hz Output: DC 375V 10A

Condition: ready for operation (used), Year of construction: 2007, A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible. Csdjzc Rfbepfx Af Ajrd

Condition: ready for operation (used), functionality: fully functional, total length: 5,000 mm, film width: 550 mm, product height (max.): 200 mm, product width (max.): 400 mm, product length (min.): 80 mm, Equipment: documentation/manual, Shrink wrapping machine Manufacturer: Hugo Beck Type: Flexo 500 S Horizontal flow wrapping machine with side sealing for tubular film, consisting of a wrapping machine and a subsequent shrink tunnel. The Flexo 500 tubular film machine boasts the highest degree of variability and flexibility. Whether for frozen pizzas, biscuit boxes, fruits and vegetables, books, skis, laminate flooring, or various household products, etc. – with this machine, you can quickly adapt to any application, for example, for daily changing orders. - Wrapping machine Hugo Beck Flexo 500 S, year of manufacture 2003 Workpiece dimensions: Width approx. 55 - 400 mm Height approx. 2 - 200 mm Length from min. approx. 80 mm to theoretically unlimited Consumable/film: half-tube, PE, PP Roll diameter: 350 mm Film width: 550 mm Feed rate approx. 20 m/min. Rated voltage 400/230 V, 50 Hz, 3 phases Rated current 5 A Connected load 3 kW Machine dimensions approx. 2500 x 1500 mm L x W Weight approx. 650 kg - Shrink tunnel Hugo Beck Type HV 601, year of manufacture 2002 Working width approx. 600 mm Clearance height approx. 300 mm Feed rate continuously adjustable Chain slat conveyor, silicone-coated transport slats Temperature control via electric thermostat, separately adjustable lower and upper heat Heating approx. 4 - 12 kW Rated voltage 230/400 V, 50 Hz, 3 phases Rated current 19 A Crjdpfx Ajyw H Rkof Asd Connected load approx. 12 kW Machine dimensions approx. 2500 x 1100 mm L x W Weight approx. 400 kg

Condition: new, Year of construction: 2024, functionality: fully functional, power: 3.6 kW (4.89 HP), input voltage: 230 V, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: mechanical, overall weight: 11 kg, compressed air connection: 6 bar, working height: 65 mm, The perfect zero joint - for laser edgebands / hot-air edgebands / co-extruded edgebands - Up to 65 mm edge height - Up to 3 mm edge thickness - Mobile or stationary use Crjdpfxor H Eals Af Aed - Tool-free changeover - Up to 3 mm edge thickness - approx. 4 min heating time - 230 V / 50 Hz

Condition: used, Year of construction: 2010, functionality: fully functional, The machine has been returned and is now functioning properly after a new machine was purchased. Codpozbipijfx Af Ajrd

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Description: - L-sealer Shrink tunnel Cedpfx Afjulixqo Ajrd

Condition: new, Year of construction: 2026, The KANTENKING is the most favorable edge processing solution for creating the zero joint for the trades with feed speeds from 10m / min, as well as in the industrial sector, with high speeds up to 22 m/min. The Kantenking HTK3030 has a speed of max. 22 m/min.. Ceded Dczzspfx Af Ajrd Your edge edger is still "in good condition", but you have already heard a lot about the null joint and ask yourself, if this is also suitable for you. You can retrofit the HOT-AIR system in any existing edge banding or BAZ. The Hot-Air-System has low maintenance and reliable. You tell us your wishes and machine data. So we can together with you and your ideas make an offer for the optimal product. Feed speeds up to 22 m/min. are possible. The Hot-Air-System is optimally integrated in your edge banding or machining center. Please don't hesitate to contact us.

Condition: used, Year of construction: 2008, functionality: unexamined, total height: 1,500 mm, total width: 1,700 mm, total length: 3,100 mm, type of input current: three-phase, input voltage: 400 V, compressed air connection: 6 bar, L sealer Crjdpfx Aexnm Rpef Aed

Condition: excellent (used), Year of construction: 2008, Description to follow! Cjdpfsyrhmbox Af Aord

Condition: ready for operation (used), Profile belt sander Swivel table Price 800. Crodpot R Tl Ssfx Af Aed

Condition: ready for operation (used), HUGO BECK horizontal flow wrapper type FLEXO 400 S, pass-through width: 55-400mm, pass-through height: 2-150mm, product length: from 80mm to unlimited, film roll width: 550mm half tube, roll diameter: 350mm, working height: 850mm +/- 50mm adjustable. Machine dimensions: approx. X/Y 2000mm/1450mm. Inspection possible by appointment. Cjdpfxjxt Rk Rj Af Aord

Condition: excellent (used), Year of construction: 2013, Hugo Beck Rotary Feeder TA 4415 The rotary feeder is the most frequently used feeder in the graphic sector. It feeds products into a packaging or inserting machine. Thanks to its rapid adjustability—from very thin to comparatively thick products—the rotary feeder is suitable for a wide range of different items. All versions are characterized by high flexibility, motorized height adjustment, as well as independent drive and control systems. Codpfjyk Eqhsx Af Ajrd Technical Data: Length: 70–400 mm Width: 90–440 mm Height: up to 8 mm Output: up to 15,000 cycles/hour

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Universal Feeder HB 350 Crsdpfxjyk Emvo Af Aod The Universal Feeder HB 350 is capable of handling even very heavy products with a height ranging from 2 to 80 mm. Thanks to its independent control and drive unit, it operates completely autonomously. It enables fully automatic feeding of both main products and inserts. For example, magazines or catalogs with a length of 148 – 420 mm, a width of 105 – 315 mm, and a height of 2 – 60 mm can be easily inserted. The performance of this universal feeder reaches up to 18,000 cycles per hour. Thanks to its motorized height adjustment, it can be used flexibly.

Condition: good (used), Shrink tunnel from a German manufacturer: -Tunnel opening approximately 500 x 200 mm. -Temperature adjustable up to 250 degrees and transport speed adjustable up to 25 m/min. -Option for fixed or rotating tunnel bars. -Deflector plates allow the hot air streams to be adjusted separately at the top and in the middle. Codpfx Ash U A I Rjf Asrd -Bottom air flow can be activated separately. -The machine can be moved or locked in place using adjustable foot rollers.

Condition: used, machine/vehicle number: IC1377, Year of construction: 2018, operating hours: 3,920 h, load capacity: 2,500 kg, lifting height: 3,170 mm, construction height: 2,275 mm, enginetype: Diesel, manufacturer: Still Crsdpszh Sgvefx Af Ajd

Condition: good (used), Year of construction: 2011, operating hours: 9,807 h, load capacity: 2,500 kg, lifting height: 5,530 mm, fuel type: diesel, mast type: triplex, construction height: 2,475 mm, empty load weight: 4,148 kg, mileage: 9,807 km, Diesel Triplex forklift Year of manufacture: 2011 Cedjzg I Hcepfx Af Aord Brand: Still (Germany) Capacity: 2,500 kg Lifting height: 5,530 mm Mast height (fully raised): 2,475 mm Equipped with: FORK SPREADER, SIDE SHIFT Fork length: 1,800 mm Watch the video on YouTube!

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 500 mm, overall weight: 4,050 kg, total height: 2,100 mm, product length (max.): 2,950 mm, This Inanlar CNC HAP 70 25/21 was manufactured in 2018. It features a bending length of 2,550 mm and a bending force of 70 tons. The machine includes a finger protection system and supports for safety and efficiency. With a main motor power of 5.5 kW and a stroke of 185 mm, it's ideal for precise bending operations. Contact us for more information about this machine. • Bending force: 70 tons • Bending capacity (steel 400 N/mm² over full length): 3 mm • Distance between uprights: 2,100 mmSpeeds • Down speed: 90 mm/s • Working speed (bending): 8 mm/s • Return speed: 70 mm/sAxes • X-axis speed: 250 mm/sSafety & equipment • Finger protection system (spaced pads): 2 units • Table supports: 2 unitsHydraulics & power • Oil tank capacity: 180 liters • Main motor power: 5.5 kWTooling / geometry • Ram stroke: 185 mm Csdpfx Afjya D U Re Asrd • Distance between prism table and ram: 380 mm • Throat depth: 310 mm • Table height: 800 mm • Table width: 110 mm Technical Specification Bending Length 2550 mm

Year of construction: 2007, condition: ready for operation (used), A wooden window sash assembly line consisting of three main components is available. 1) Sash stop table with punching unit and Powasert automatic screwdriver. 2) Max Striffler glazing bead saw. 3) Ruchser RU-GOB-ES corner hinge and handle drilling machine, year of manufacture: 2007. Documentation available. An on-site inspection is possible. Package sale only. Crjdozi Eimopfx Af Asd