Used Vemagcart Washer for sale (1,250)

Condition: good (used), • Semi Staal cartwashes for 200-300 liter wagons. • Type : VV1-1. • Capacity : 20-30 vemag carts/h Pedpfxod Ix Htj Andepw • Total dimensions : • Length : 240cm. • Width: 285cm. • Heigth : 280cm.

Condition: new, Year of construction: 2026, functionality: fully functional, FABO Log Washers are designed to remove woods, plastic clay contaminants and other harmful materials from gravel, stone and hard ore feeds. Designed to successfully clean the most difficult materials, FABO Log Washers allow the user to obtain valuable products from what was once considered waste. When selecting a Log Washer, the variety of feed material must be taken into consideration. The volume and shape of the feed material can influence the capacity of a particular size fraction. FABO can provide a list of capacities and water requirements based on the user's material. Key benefits to the buyer include improved wear characteristics, reduced costs and the ability to efficiently wash aggregates and drift out clays/sands/lights (wood/plastics) on one chassis. Ppsdpsy I Nugsfx Andew

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Ppedpfx Anezlr N Sodow Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! Ppjdpfx Asy H Aizendow *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. Ppodpfx Asq Nf S Rsndew 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. Pjdpfx Anoxpxyrodopw The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Year of construction: 2020, condition: new, PLC microprocessor control Ppodpfxofz Dvvs Andew • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Podsfz Ax Sopfx Andspw The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control Ppsdpfx Aneflpmqsdow • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Pedsfzrapspfx Andopw The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Pedpfx Aefz A D Nondepw The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? Pjdpoxp Urdjfx Andspw CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting

Condition: excellent (used), 476 USED Hobart basket washer. EXTERNAL DIMENSIONS (in cm): - W:145 - L: 94 Ppjdpfxjzpzn Es Andsw - H: 193 (open: 280) INTERNAL DIMENSIONS (in cm): - W: 120 - L: 68 - H: 80 The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2023, 462 USED Hobart bakery basket washer, dishwasher with water softener. TECHNICAL DATA: - year of production: 2023 - equipped with a water softener EXTERNAL DIMENSIONS (in cm): - width 138 - length 95 (135 with door open) - height 202 (244 with door open) INTERNAL DIMENSIONS (in cm): - width 122 - length 68 Pjdpeznxduofx Andepw - height 84 (for spray arms) Paid options available: transport of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), inner diameter: 1,500 mm, inner dimension height: 900 mm, pressure: 4 bar, temperature: 90 °C, load capacity: 800 kg, operating pressure: 4 bar, For sale: a spray washing machine from the Finnish brand Aqua Clean. The entire unit is made of acid-resistant steel and additionally insulated. The washing area has a diameter of 150 cm and a height of 90 cm. The machine allows for setting the working time and temperature up to 90°C. Spraying is performed from below, from the side, and from above under a pressure of 4 atmospheres. The pump has had its seals replaced with Viton seals, which are resistant to harsh chemicals. It also features an exhaust fan for removing fumes. The load capacity is 800 kg. A video demonstrating the machine in operation is attached to the advertisement. Transportation is possible throughout the EU. Psdpfxozgx H Ts Andopw

Condition: excellent (used), I'm selling a lightly used spray washer from the Danish company Compact, model 1000-H. The machine is ready to work without leaks. We can work on site or send a video. The raised version, which is standard 70 cm high, is 100 cm above the basket. The version is made entirely of stainless steel and is additionally insulated. It sprays from the bottom, top, and side. Adjustable operating time and temperature. The basket diameter is 100 cm. The tank holds 330 liters. It weighs 800 kg. It has a 500 kg load. It has a steam extraction fan. Possible transport within the EU Ppedpfxozqd Tye Andow

Condition: new, Year of construction: 2026, functionality: fully functional, A workshop washer is a universal tool that should be found in every service center, garage or workshop. This indispensable device allows you to quickly and inexpensively remove dirt. A very big advantage is the ability to use the washer in a closed room. Cabinet parts washer ensures effective removal of various contaminants, from oils to hard-to-reach residues, ensuring safety and prolonged efficiency of components. The applied technology not only guarantees cleanliness but also provides protection against corrosion. It should be noted that cleaning results depend on the detergents used. The parts washer is designed to use up to 90 liters of cleaning solution, with a maximum tank capacity of 140 liters. To achieve maximum efficiency, the pump inlet should be covered. The pump operates in a flow range of 2.7 to 3.6 liters per minute, allowing precise cleaning of surfaces, even those with minor cracks, using a strong stream. The liquid is drawn from the bottom of the tank in a closed circuit and delivered under pressure through a flexible hose. The workshop washer has four legs, ensuring stable operation and an optimized working height. The cover locks automatically when opened. The device is also equipped with a worktop below the tank level, which can be used to place accessories for washing or cleaned parts to allow them to dry. Assembly of the device is required. Technical data: Tank capacity 140L Psdpferh Ey Rjx Andepw Maximum volume of washing liquid 90L Maximum pump efficiency 2,7–3,6 l/min Power supply 230 V Dimensions 1130x540x885 mm Tray dimensions 800x500 mm Weight 43 kg Power supply 230V We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, functionality: fully functional, This cabin pressure washer made of high-quality stainless steel is a tool that raises cleaning standards to a new level. Designed with professional applications in mind, this washer offers reliability, durability and performance. Made from high-grade stainless steel, it provides durability and resistance to environmental conditions, ensuring long-lasting performance even in the most demanding working conditions. Unit description: With a robust stainless steel construction, our cabin washer is corrosion resistant and provides long-lasting performance even in harsh environments. Equipped with advanced pressure technology, it provides effective removal of dirt, oil, grease and other contaminants from a variety of surfaces. Our cabin pressure washer is an essential tool for businesses that value cleanliness, efficiency and reliability. It will make cleaning tasks easier, faster and more efficient, resulting in customer satisfaction and improved productivity. Cleaning takes place in a closed circuit, using a washing liquid heated to as much as 70 degrees Celsius. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is equipped with a dual-function gun from which either air alone or air with detergent can be discharged. This allows the washed object to be dried with compressed air. Using a cabin pressure washer made of stainless steel has many advantages, including: 1. thanks to the high water pressure combined with detergents, the washer removes even the most stubborn dirt such as oil, grease and rust, ensuring clean and shiny surfaces. 2. the cabin washer enables larger surfaces to be cleaned quickly and effectively in less time than traditional manual cleaning methods. 3. with different pressure setting options, the washer can be adapted to different types of surfaces and types of dirt, making it a versatile cleaning tool. 4. made from high quality stainless steel, the washer is corrosion and damage resistant, ensuring a long service life and minimising the need for maintenance. 5. the cabin washer is easy to operate, allowing operators to quickly learn how to use it and achieve professional results without lengthy training. 6. with its fast and effective cleaning, the cabin washer contributes to increased productivity, which can lead to time and cost savings for the company. Using a cabin pressure washer is not only an investment in cleanliness, but also in efficiency and durability, which translates into benefits for both companies and individual users. Ppedpeuc Tpyofx Andow Parameters of the MP180 pressure washer: Washer capacity 180 litres Frequency 50 Hz Weight 56 kg Voltage 230 V Height with legs 1450 mm Height without legs 920 mm Internal width 740 mm Internal height (to open lid) 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: new, Year of construction: 2026, functionality: fully functional, WORKSHOP PRESSURE WASHER MP150 Features: Washing takes place in a closed circuit, using a washing liquid. The preparation comes out of the nozzle of the gun at a pressure of up to 8 Bar, thanks to which it thoroughly cleans hard-to-reach places and heavily soiled parts with carbon deposits, greases or oils. The washer is very well suited for the regeneration of turbochargers and for cleaning heavily soiled parts made of steel, cast iron, aluminum and other alloys. The cover of the washer has been equipped with pneumatic cylinders that increase the safety and quality of work with the washer. The cabin is equipped with lighting of the working area as standard. The washer has a two-function gun, from which air alone or air with a washing agent can come out. The washed item can be dried with compressed air. *We kindly inform you that the washer is for self-assembly. Podpfx Ansvugwmsdspw Technical data Capacity: 160L Liquid tub capacity: 8-14 L Working pressure: 5-8bar Weight: 29 kg Air regulation Pneumatic gun Illuminated cabin Ventilation working Dimensions: 770x610x700mm

Year of construction: 2010, condition: good (used), For Sale: Brand: Lets Type: Crate washer Ppjdeznh D Djpfx Andew The crate washer is adjustable in height and width. Included: - Soap pump Maximum crate dimensions: width x height 650 mm x 240 mm Suitable for crates with a width of 600 mm. Overall machine dimensions: length x width x height 3200 mm x 1200 mm x 2150 mm It is possible to view this crate washer on-site. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Year of construction: 2009, condition: good (used), For Sale: Make: Kittner Type: Crate washing machine + dryer Automatic feed Included: - Crate washer + dryer - Electrical diagrams The crate washer is adjustable in height and width. Maximum crate dimensions: width x height 420 mm x 270 mm Overall machine dimensions: length x width x height 4000 mm x 1200 mm x 1640 mm It is possible to view this crate washer on site. If you have any questions or comments, please do not hesitate to contact us. Ppedpfxsznhwqe Andsw Sincerely, Leo Holland

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Ppjdpfxod I Aw Es Andew Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.

Condition: new, A mass production washing machine where parts are transported by hanger conveyor and washed by passing through tunnels. Washing is done by spraying or immersion ultrasonic dipping. Working Principle: Parts are transferred by hanging on to the hooks of the top loading conveyor belt. General process cycle: Washing - Rinsing - Optionally Ultrasonic Immersion Washing - Drying All of the HANGWASHes are tailor-made and have lots of options depending on your needs. Please feel free ot contact with us for further information. Pjdpfx Anod I E Itsdspw

Condition: new, INTERSONIK shock absorber pipe washing machine is specially designed by INTERSONIK design and manifacture engineers. PLC controlled machine provides both very little process time and perfect cleaning and dryness. Some technical details about the machine: PLC controlled. High pressure stainless steel pump Heavy duty blower Very little cycle time Psdpfjd R Az Rjx Andjpw Compatible with different diameters and lengths Pump filter system Ideal for the automotive industry. Please feel free to contact us for other details. You can check our youtube channel and visit our website.

Year of construction: 2023, condition: new, INTERSONIK VAPCON is designed and produced by INTERSONIK engineers and used for eliminating water vapor generated by industrial parts washers. For a parts washer operating with 70 degrees Celcius hot water it is amazing that there is no water vapor emission during the washing and when the lid is opened as well. Ppodped Nwlfefx Andjw In the video, you can see an industrial application of VAPCON. VAPCON helps improving work safety by eliminating the vapor and save nature by recycling the water. Ideal for parts washers. For detailed information please contact us.