Used Viber-System We1530R 1500 Kg / 3 M for sale (1,21,016)

Condition: new, Year of construction: 2026, Load capacity 1500 kg Lifting height 3000 mm Total mast height 3483 mm Battery voltage 24 V Battery weight 2×23.5 kg Battery capacity 85 Ah Drive motor power 0.75 kW Lift motor power 2.2 kW Travel speed (with / without load) 4.2 / 4.5 km/h Turning radius 1366 mm Fork length 1150 mm Maximum fork spread 700 mm Fork width 165 mm Total height (lowered forks) 1983 mm Own weight 560 kg Noise level < 70 dB(A) Wheel type Polyurethane (PU) Drive wheel Ø210 × 75 mm Cjdpfszr Ey Dsx Ai Sorh Load wheel Ø80 × 60 mm Stabilizer wheel Ø115 × 55 mm Wheel arrangement (front / rear, x = driven) 1x, 1/4

Condition: new, Year of construction: 2026, Load capacity 1500 kg Fork lift height 3000 mm Mast type Two-stage Fork length 1150 mm Fork width 550 mm Minimum fork height ≤ 90 mm Traction / lifting motor 0.75 kW AC / 2.2 kW DC Battery 24 V / 100 Ah (lead-acid) Battery weight 2×32.5 kg Charging time approx. 4 hours Crjdpfxozr E Dio Ai Ssh Charger power supply 230 V AC Travel speed (with / without load) 3.5 / 4.5 km/h Lift speed (with / without load) 100 / 155 mm/s Mast height (folded / extended) 2083 / 3568 mm Turning radius 1482 mm Weight 600 kg Operator platform: Foldable, with safety lock Noise level: < 70 dB(A) Wheel type: Polyurethane Drive wheel size: Ø250 × 80 mm Bearing wheel size: Ø80 × 60 mm Additional wheels (dimensions): Ø115 × 55 mm Wheel arrangement (front/rear, x = driven): 1x, 2/4

Condition: excellent (used), Approx. 1500 m² single-story steel platform Used, good condition, see pictures. Manufacturer: STOW Length approx. 58.5 m Width approx. 54.6 m Height (bottom edge) 3.4 m Height (top edge) 3.7 m Load capacity 500 kg/m² C-profile and Sigma-profile construction Fastened with screws and nuts Adjustable grid spacing in length Floor construction is 38 mm chipboard, highly compressed, tongue and groove Underside white, top side gray coated Negotiable price: Offer upon request! Partial sale possible! Dismantled and loaded. Goods are in stock. Transport costs available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. Csdpod S S N Rofx Ai Sjrh (Subject to changes and errors in technical data, information and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse) Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ PROMPTLY AVAILABLE: • Over 10,000 linear meters of racking promptly available • 20,000 m² of warehouse platforms & steel platforms immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR ASSORTMENT (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance orders, we offer a real all-round carefree package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete inventory including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of others. Our full service is provided by our own employees: Cataloging, office preparation, inspection, goods dispatch, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Crodpfx Ajzz Rw Hoi Sjh Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201

Condition: like new (used), Staff Ice System BTX150 Ice Cube Machine / Ice Maker 150 kg/24h Year 2022 Technical Specifications Gelato BTX150 A Staff Ice System ice machine for the production and storage of ice cream. Designed for manufacturing and storing ice cream. Automatic extraction. Stirrer with durable polyethylene blades. The double lid allows ingredients to be added during the process. Vertical tank for complete control of the production process. 50 customizable operating programs. Technical features: Maximum ice cream production per cycle: 2 liters. Ice cream production: 15 l/h. Dimensions: 43.5 x 59.2 x 59.5 cm. Credpfx Aioyzc Rue Sjh

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 406 × 813 mm. Magnetic chuck 400 × 800 mm. Maximum table load with magnetic chuck: 500 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 350 × 40 × 127 mm. Spindle speed 1450 rpm. Crjdpszr H Najfx Ai Seh Spindle motor power 5.5 kW. Total machine power 9 kW. Surface roughness up to Ra 0.63 µm. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Another model with a larger worktable is available: the SMP40100AHD (406 x 1020 mm) - priced at €26,000.

Condition: excellent (used), functionality: fully functional, load capacity: 1,500 kg, Equipment: foot remote control, 3-axis PEMA welding positioner APS 1500 Credpsyupd Hefx Ai Soh - stepless height adjustment - includes hand-held remote control - maximum load 15,000 N (1,500 kg) - rotation speed 0.07 - 1.3 rpm - rotational torque 1,000 Nm - hydraulic tilting up to 135° - tilting torque 3,000 N - max welding current 700 A - plate diameter 700 mm - height 780 - 1,550 mm - dimensions 1,640 x 810 mm - power supply 3 x 400 V / CEE 16A - weight 730 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, load capacity: 1,500 kg, The Siegmund M positioner is ideal for welding, assembly and maintenance work. Positioning is carried out using a manually driven handwheel. Positioner with load capacities of up to 1,500 kg. Crsdpevlgzasfx Ai Sjh Torque 900 Nm Handwheel with handle Ø 315 mm U-angle compatibility System 28 Max. length of U-angle 3,000 mm A - Working height 850 mm B - Column height 955 mm C - Total height 1,140 mm D - Width of base plate 600 mm E - Length of base plate 600 mm Price does not include 3D accessories. Prices 3-D accessories, heavy cast parts, wall thickness 28mm, everything processed, special prices New: original angle 28 U-shape 500mm x 200mm x 200mm (surcharge 500.-€) or 2000mm x 200mm x 200mm (surcharge approx. 1000.-€) or 2400mm x 200mm x 200mm (surcharge 1300.-€) or with table top 28 hole, 2000mm x 1000mm x 200mm (surcharge 2000.-€) several positioners are available

Condition: like new (used), 1500 m² Schäfer R3000 warehouse racking system, 3 stories Used, in top condition, like new, see pictures. Ground floor: steel construction warehouse racking system, above: 2 floors of Schäfer shelving system Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 stories Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications, and prices, as well as prior sale! See our terms and conditions, all prices excl. VAT, ex warehouse). Lenox Trading – Top warehouse technology & used and new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of warehouse racking & steel construction racking immediately available • 30-50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether it's pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racks or racks for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, disassembly and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS: ONLINE AUCTIONS & LIQUIDATION For disassembly and clearance projects, we offer a complete, all-round carefree package: 1. Fixed-price purchase: Purchase of merchandise, equipment & complete inventory including a thorough cleanup. Crsdpshzw Hijfx Ai Ssh 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: Cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough handover. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2026, 3-jaw chuck 200 mm Max. turning diameter over bed 410 mm Turning diameter over cross slide 255 mm Turning diameter in bridge recess 580 mm Center distance 1000 mm Center height 205 mm Top slide travel 140 mm (accurate 0.02 mm) Cross travel 210 mm (accurate 0.02 mm) Longitudinal travel 750 mm (accurate 0.2 mm) Cjdpfxszr I D Se Ai Ssrh Bed width 250 mm Spindle bore 52 mm Spindle nose D1-6 CAMLOCK Spindle taper MK6 Lathe post dimensions 100 × 100 × 32 mm Max. tool dimensions 20 × 20 mm Spindle speeds: 16 ranges, 45 – 1800 rpm Spindle speed range: 45, 70, 90, 108, 140, 165, 215, 255, 330, 385, 510, 585, 770, 900, 1170, 1800 rpm Metric thread (42) 0.2 – 14 mm/rev Inch thread (42) 2 – 72 TPI Modular thread (18) 0.3 – 3.5 mm D.P. thread (21) 8 – 44 DP Longitudinal feed range (17) 0.05 – 1.7 mm/rev Cross feed range (17) 0.025 – 0.85 mm/rev. Tailstock quill diameter 50 mm Tailstock quill stroke 120 mm (accurate 0.02 mm) Tailstock quill taper MK4 Main motor power 2.2 / 3.3 kW Coolant pump power 90 W Dimensions (L × W × H) 2050 × 900 × 1650 mm Weight 1600 kg A larger model (410 x 1500 mm) is available for €6,800 net.

Condition: excellent (used), Year of construction: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Injection pressure: 2020 bar Credpoz Iql Isfx Ai Soh Metering volume: 231 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 580x590 mm ejector: hydraulic clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runners Injection unit hardened - bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/width/height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: new, Year of construction: 2026, Center distance 1500 mm Center height 210 mm Swing over bed 500 mm Swing over cavity 710 mm Swing over bed slide 300 mm Bed width 405 mm Spindle bore 82 mm (D8) Spindle taper 90-(1:20) Speed ​​range 9 – 1600 rpm Maximum tool size 25 × 25 mm Longitudinal feed range 0.028 – 6.43 mm Cedpjzr I H Hsfx Ai Sorh Cross feed range 0.012 – 2.73 mm Metric thread 0.5 – 224 mm / 48 ranges Inch thread 56 – 1/4 TPI / 45 ranges Modular thread 0.5 – 112 mm / 42 steps DP 56 thread – 1/4 DP / 45 steps Center diameter 75 mm Center travel 150 mm Tailstock taper MK5 Motor power (S1/S6) 7.5 / 9 kW (10 HP) Pump power (S1/S6) 0.1 / 0.12 kW Machine dimensions (L × W × H) 2700 × 1150 × 1800 mm Weight 2850 kg A larger model is available, 660 x 2000 mm, priced at €14,800 net.

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar Crodpfoz Iz Sfjx Ai Soh

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Csdpfxoyi Uq Ue Ai Sjrh Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Noise level 68–71 dB

Condition: new, New refrigeration compressor (compressor) from the renowned manufacturer Copeland. Condition: New – warehouse stock (old stock), with no signs of operation. The compressor is factory-prepared, protected, and equipped with safety labels. Identification data (from nameplate): • Manufacturer: Copeland • Type: D3RS/1500/EWM7000 • Catalog number: 606.110.14 • Serial number: 356784 (BBC-YORK) • Design: semi-hermetic • Application: refrigeration / air conditioning system • Configuration: Block 1 • Start-up: U. Direct start (direct-on-line starting) • Equipment: Oil sump heater (Kurbelwannenheizung) Electrical data (from Copeland nameplate): • Power supply: 3~ 50 Hz • Speed: 1,450 rpm • Volumetric capacity: 49.90 m³/h • Voltage: 380–420 V (Y) • Starting current (LRA): 117–129 A • Max. operating current (MRA): 28.8 A Crjdpoyga Utsfx Ai Ssh • Max. working pressure H/L: 25 / 20.5 bar • Test pressure H/L: 27.5 / 22.6 bar • Degree of protection: IP54 • Year: 1996 Oil (recommended): • Mineral: Fuchs KM / Suniso 3 GS / Capella WF 32 / Shell 22-12 The compressor is ideal as a new replacement part, for modernization of refrigeration or air-conditioning installations. Sale as shown in the pictures.

Condition: new, Year of construction: 2026, Automatic grinding thanks to PLC control. Worktable 250 x 500 mm. Magnetic chuck 250 x 500 mm. Maximum table load with magnetic chuck: 180 kg. Servo-driven vertical axis for precise automatic feed. Hydraulic longitudinal table feed. Automatic vertical and cross feed. Worktable speed 7–23 m/min. Grinding wheel dimensions 200 x 20 x 31.75 mm. Spindle motor power 2.2 kW. Total machine power 3.7 kW. Surface roughness up to Ra 0.63 µm. Includes: coolant system, magnetic separator, hydraulic station, lubrication, magnetic chuck, PLC controller, and touchscreen. The automatic vertical feed range includes values ​​of 0.005 / 0.01 / 0.02 / 0.03 / 0.04 / 0.05 mm/stroke, allowing you to adjust the operating parameters to the type of material, required accuracy, and desired surface finish. Codpfezr H E Ujx Ai Serh Another model with a larger worktable is available: the SMP3063AHD (635 x 305 mm) and costs €22,000.

Condition: new, functionality: fully functional, Year of construction: 2026, actuation type: electric, pipe diameter (max.): 35 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 360 °, bending radius (max.): 150 mm, bending radius (min.): 32 mm, overall weight: 28 kg, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, the mobile bending machine with great performance: The compact, mobile design enables precise and repeatable bending stationary and directly at the installation site up to a tube diameter of 35 mm, CU 42 mm. A powerful three-phase motor and a precision gearbox provide powerful drive. The motor speed is automatically adjusted, resulting in increased return speed and shorter cycle times. Optimum bending accuracy and very high repeatability are achieved by position detection directly on the bending axis. The bending angle is easily and quickly set to 0.5° using pushbuttons. The large LCD display clearly shows the angles. The storage of up to three bending angles enables the rational bending of tubes with different bending results. For transport, the compact unit with accessories can be neatly and safely stored in sturdy transport cases. The "upright tube and rotating tool" principle ensures low space requirements during bending. Sliding shoes are used for thin-walled tubes to enable crease-free bending and to bend bends with the slightest deformations from, for example, stainless steel and copper tubes. Cedpfx Asnfvx Noi Sorh With the PB20 profile bending attachment, flat, square and round iron can be bent without problems. POSSIBLE APPLICATIONS: - Hydraulic piping - Sample construction - Sanitary and heating construction - Technical data: - Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material. - Bending radius min/max: 36 mm/150 mm - Precise digital bending angle adjustment 0.5°. - Maximum 180º bending result; for special applications Endless operation possible - Hexagonal shaft 40 mm for quick tool change - Safety foot switch with emergency stop function - Alternating current 230 V connection - Weight 29 kg - Frequency converter and three-phase motor - 3 bending angles storable OPTIONAL ACCESSORIES: - Slide shoe holder - double roller holder - Profile bender PB20 - for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm - tripod base - machine case - tool case - Small bending device KBV - Special tool according to specification OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Year of construction: 2018, operating hours: 386 h, lifting height: 3,400 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, Year of manufacture: 2018 Empty weight: 1.581 kg Lifting capacity: 1.500 kg Crodpfxjz I A Ste Ai Seh CE mark: yes Technical condition: good Visual appearance: good Mast type: duplex = Additional options and accessories = - Battery charger = Remarks = Please contact Bas Sindorf , ) for more information

Condition: excellent (used), Year of construction: 2024, TBM-D 2009006 – Position Sensor Box / Inclination Sensor Box V3 Csdeyc H R Topfx Ai Ssrh Manufacturer: TBM SW-Entwicklung und Elektronik GmbH (Germany) Production date: 02/2024 Power supply: 12 V DC, power consumption 70 W Condition: used, very good, fully functional Professional measurement/control box designed for industrial applications. The device is used for handling and processing signals from position/inclination sensors in test systems, automation, and research & development stations. Equipment and features: • LCD display for parameter presentation • Numeric keypad for configuration and operation • D-Sub communication interface • 12 V power sockets • Robust aluminum housing • CE marking • Device inspected (TBM inspection stickers)

Condition: excellent (used), Year of construction: 2008, DEMAG Injection Moulding Machine System 1500/1500-16000 Basic Data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Dimensions of mounting plates (H × V): 2150 × 1880 mm Clearance between tie bars (H × V): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Injection weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and Hydraulic Equipment Rated pump motor power: 165 kW Heater power: 97 kW Cedeyugalopfx Ai Sjrh Machine Dimensions and Weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service History / Repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board 2017 – new motor and pump no. 2 2017 – new injection cylinder rod BS with seals 2017 – replacement of oil cooler circulation pump 2017 – replacement of TeachBox (robot) 2018 – replacement of pumps P1 + P3 (at 65,800 h) 2018 – hydraulic oil change Optional ESS (Energy Saving Systems) The machine can be equipped with a modern ESS servo drive system, which significantly improves energy efficiency in hydraulic plastic injection moulding machines. The system controls the operation of the hydraulic pump motor through a frequency inverter, which adjusts the motor speed to the machine’s actual demand during the production cycle. As a result, electricity is consumed only when it is truly needed. Main Benefits - Up to 30% reduction in energy consumption - Servo drive technology for hydraulic pumps - Global quality and proven technology used in the plastics processing industry - Reduced energy loss during machine idle time - Lower heating of the hydraulic system - Extended service life for the motor and hydraulic components - Option for installation in existing hydraulic injection moulding machines The ESS system allows significant reduction of machine operating costs while maintaining full production performance parameters.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. Crodpfx Aiow I Ez Io Seh ( Source: Kuka's Website )

Year of construction: 2026, condition: new, High capacity semi-finished coil slitting line available with fast delivery and turnkey configuration. Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. FAST DELIVERY ADVANTAGE Semi-finished machine with accelerated delivery possibility Main production stages already completed Delivery within approximately 75 working days Much shorter lead time compared to new production Special opportunity offer This coil slitting line is currently in semi-finished production status, offering an important delivery advantage for companies looking for faster commissioning and reduced lead times. Since critical manufacturing processes and major components are already prepared, the line can be completed and delivered significantly faster compared to a newly manufactured machine. The system is designed for high-capacity production and demanding industrial applications. It ensures stable operation, high slitting precision and reliable performance even under continuous heavy-duty working conditions. TECHNICAL SPECIFICATIONS Material Thickness: 0.3 – 3 mm Coil Width: up to 1500 mm Coil Weight: up to 20 Ton Slitting Speed: up to 40 m/min Slitting Accuracy: ±0.1 mm LINE COMPONENTS Hydraulic decoiler (20 Ton capacity) Hydraulic coil loading car Infeed system with straightener unit Slitting head with precision knife adjustment Scrap winding system Tension unit and separator system Hydraulic recoiler Exit system and automation Csdpfxoyzbzro Ai Sjrh ENGINEERING FEATURES High precision slitting performance Servo-supported and stable feeding system Robust slitting head with gearbox transmission Adjustable knife system for different slit widths Heavy-duty structure for industrial production Advanced automation system (HMI controlled) OPERATIONAL ADVANTAGES Faster delivery compared to newly manufactured lines Reduced investment waiting time Reliable and stable production Suitable for various materials (steel, aluminum, etc.) Competitive lead time advantage 24/7 after sales support APPLICATION AREAS Steel service centers Coil processing facilities Sheet metal manufacturers Automotive and construction industries

Condition: used, mileage: 5,65,000 km, power: 243 kW (330.39 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 10 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, loading space length: 8,150 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, Year of manufacture: 2018 Front axle: Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Double wheels; Tyre profile left inner: 100%; Tyre profile left outer: 100%; Tyre profile right outer: 100%; Tyre profile right outer: 100% Empty weight: 9.705 kg Carrying capacity: 8.895 kg GVW: 18.600 kg Tail lift: Dhollandia, 1500 kg APK (MOT): tested until 03/2027 Registration number: 41-BKR-3 = Additional options and accessories = - 3 Seats - Airbag - Air horn - Aluminium fuel tank - Camera system - Heavy duty engine brake - Lat to lath timbered - LED- lighting - Lock diff - Radio Crjdpfx Ajz Azr Dsi Ssh - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat 2x

Condition: used, Pillar jib crane, indoor crane, workplace crane -Load capacity: 500 kg -with chain hoist: SWF type 50/F -Year of construction: 1980 -Main stroke: 4.5 m/min -Fine stroke: 0.75 m/min -Projection: 3000 mm -Total height: 3760 mm -Hook height: 2940 mm -Swivel range: 360° -Transport dimensions: 3490/1100/H1400 mm Csdpfx Ajfla Rnoi Serh -Own weight: 748 kg

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases Cjdpong A R Sjfx Ai Ssrh - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site