Used Vtm Group Dpf Cleaning Machine for sale (68,872)

Condition: new, functionality: fully functional, total length: 1,200 mm, total height: 2,100 mm, total width: 2,500 mm, empty load weight: 750 kg, input voltage: 400 V, water tank capacity: 400 l, warranty duration: 12 months, DPF DUO PREMIUM = CLEANING CABIN + DRYER FOR DPF/FAP FILTERS This set of devices allows for maximum optimization of the regeneration process. A well-organized operator can work with three filters simultaneously. Washes Dries Advantages of the DPF DUO Premium: -> A separate dryer doubles work efficiency -> We are the only ones to offer a large-diameter hose that connects to the DPF. A larger diameter = more water = more effective cleaning -> Our filter mounting system is free of elements placed inside the DPF filter tube that could block the water flow. This allows the full performance of the water and air pump to be utilized, shortening regeneration time. -> The large cabin provides the freedom to mount the cleaned filter. The operator, based on their experience, can choose the position in which the filter will be washed. Pgjdsxm Szqspfx Adkep -> Protection against excessive pressure in the filter during cleaning -> Protection against lack of airflow through the filter during drying -> Possibility to individually set the cleaning program according to the filter capacity -> Stable securing of the filter during drying -> Three-stage dirty water filtration system -> Water heating controller -> Insulated water tank -> Training at the customer's site can be provided The device enables the removal of soot and ash from DPF/FAP filters without negatively impacting the filter structure, restoring up to 99% of the nominal flow rate. Our technicians have dedicated significant effort to ensure that both the cleaning procedures and the detergents used are safe for the environment and machine operators. The operator checks the filter for mechanical damage using an endoscopic camera. If signs of melting, ceramic core cracks, or other apparent mechanical damage interfering with the DPF are detected, regeneration will not be possible. The regeneration process takes place in a closed chamber equipped with filters preventing harmful contaminants from escaping into the environment. Water with cleaning fluid circulates in a closed loop and is filtered throughout the process, significantly extending bath life. The DPF DUO Premium cleans filters using water, chemistry, and air. A precisely selected, computer-controlled sequence of water and detergent dosing, combined with air and impulses generated by compressed air, ensures high regeneration efficiency. After the cleaning process is complete, an additional device dries the filter with air at 90°C, ensuring complete evaporation of the cleaning solution. After drying, the machine performs a final backpressure measurement. This measurement can also be taken before cleaning, allowing subsequent comparison of backpressure values before and after the process. The device is equipped with a printer that allows generating a measurement report. The washing time for filters from passenger cars or light commercial vehicles is 20–40 minutes, which enables regeneration of up to a dozen filters in 8 hours. High efficiency combined with low operating costs guarantees a rapid return on investment.

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. Pjdpfx Ajpbv Hgedkogp + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: new, Year of construction: 2025, warranty duration: 12 months, water tank capacity: 300 l, type of input current: three-phase, total width: 2,360 mm, total length: 970 mm, total height: 2,030 mm, input frequency: 50 Hz, DPF Filter Regeneration Machine - MOTSLER SLR Premium The MOTSLER SLR Premium is a high-quality, reliable, economical, and very user-friendly machine designed for the professional cleaning of DPF, FAP, GPF, SCR, DOC, EURO6 filters, as well as catalytic converters. It supports all filter sizes—from passenger cars, vans, trucks, to construction machinery and equipment. The unit is entirely made of stainless steel and built using high-quality components sourced from leading Polish and European manufacturers such as Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, and Hager. The SLR Premium machine carries out the complete DPF cleaning process, which includes: initial measurement, cleaning, drying, final measurement, and concludes with a printed DPF cleaning report. Technical Specifications: - Device dimensions (L/W/H) [mm]: 2360 x 975 x 2031 - Chamber dimensions (L/W/H) [mm]: 1600 x 830 x 1090 - Machine construction: 304 stainless steel - Weight: 550 kg - Power supply: 3 x 400V 50 Hz - Max. power: 11 kW - Optimal power consumption: 6.9 kW - Circuit protection: 20 A - Tank capacity: 300 liters - Pump performance: 250 L/min - Hose diameter: 1.5” DN 40 - Water drain: 2” DN 50 Pjdpfx Aetrmrisdksgp - Drying temperature: 100 – 120°C - Water temperature: 10 – 50°C - Max. air flow (drying): 325 m3/h - Air pressure (drying): 300 mbar - Drying and cleaning: bidirectional manual - Contamination measurement: on dry and wet DPF filter - Filtration: 250 – 1 micron - Pre-filtration: 2 pre-filters - Filter replacement frequency: approx. every 40–100 cycles - Noise level: 70 dB - Min. ambient temperature: 3°C - Declarations of conformity: EC, CE Equipment: - Single-pipe SWS system - Professional PFS filtration system (cartridge replacement every 40–100 DPF filters) - 7” touchscreen display - Thermal printer for cleaning reports - Caster wheels - Adjustable leveling feet - Tempered glass windows - 2 cleaning hoses - 17 adapters for connecting DPF filters - 8 rubber seals for adapters - 4 DPF filter retainers - 4 adapter clamps - Inspection camera - Foam neutralizer - 2 pre-filters - Main filter cartridge - DPF CleanX cleaning fluid Equipment / Adapters: - All adapters for passenger cars and trucks - Set of rubber seals for adapters - DPF filter locks to prevent movement WHAT DISTINGUISHES THE SLR PREMIUM MACHINE? Build Quality: - Constructed entirely from stainless steel with components from leading European manufacturers: Schneider, Fatec, Weintek, Ebara, Calpeda, Eaton, Wieland, ensuring top-tier precision. Single-Pipe SWS System: - All processes are conducted through one hose, eliminating the need to stop the machine, open doors, or reconnect the DPF filter between cleaning, drying, and measurement hoses. PFS Filtration System: - Multi-stage filtration system featuring two reusable stainless steel pre-filters and a main filter with a 4.8 m² area, supporting from 40 to 100 DPF filters per cycle. Side Ventilation: - Enables operation in low-ceiling spaces. Steam does not condense on the machine’s top, avoiding water ingress into electronics, electrical short circuits, or machine damage.

Year of construction: 2025, condition: new, A post-lease refurbished unit for regeneration of DPF, FAP, GPF, SCR, EURO5, EURO6, DOC and catalytic converters. Podpfx Adsig H H Eskjgp The device after a comprehensive overhaul: -new hoses and seals -regenerated turbine and water pump - latest software version -manufacturer's warranty ASK ABOUT AVAILABLE MODELS AND PRICE!!!

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Pgedov S Dihopfx Adksp The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database Pedpfx Aettg S Uodkogp • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: new, DRIVESHAFT BALANCING MACHINE BVI-03-88 Balancing machine for professional repair of cardan shafts up to 200 kg. The hard-bearing machine is adapted for heavy cardan shafts of trucks and special machinery. The high sensitivity of the supports allows also high-quality balancing of cardan shafts of passenger cars. The machine is designed for balancing cardan shafts in the facilities of cardan repair workshops. The machine can be quickly reconfigured for balancing a large amount of single cardan shafts of various designs, as well as for the production of small batches of shafts. Pgedpen E Skwjfx Adkop . . . TWO TIMES faster then your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . .. ... HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 5200mm, weight up to 200kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Hard-bearing type machine - safe balancing of shafts with large initial unbalance • Machine is operated by one worker • Sliding tailstock spindle - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 200 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 5200 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2500 rpm Parameters of the supply network 380V, 3 Ph, 50Hz Power consumption, minimum, 3 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 1100 kg

Condition: new, Year of construction: 2025, Technical Specifications: Laser Power: 2kW Laser Type: Continuous Fiber Laser Laser Source: MAX Adjustable Cleaning Length: 0 – 300 mm Approximate Cleaning Speed: 10 – 60 m2/hour Laser Wavelength: 1070 nm Output Power Stability: ± 2% Laser Cooling System: Included (with antifreeze) Power Supply: 220V 50Hz Pgsdpfx Adozkkc Uokjp Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 – 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 10 m Machine Dimensions (L x W x H): 1,000 x 650 x 950 mm Weight: 230 kg CE Certification: Included

Condition: new, VSR turbocharger high-speed balancing machine SBR-10 SBR-10 professional specialised equipment for high-speed balancing of assembled turbo cartridges. Equally useful for car and truck turbocharger. Psdpfenfvmhsx Adkjgp The machine was designed for entry level turbocharger repair workshop, including medium re-manufacturers. It solves a wide range of tasks that repair centres face on a daily basis. The SBR-10 simulates the same testing and balancing conditions as the turbocharger on the vehicle, this allows the quality of the repair to be guaranteed. It also allows checking turbocharger for oil leakage. A well-balanced turbocharger has a long service life which reduces the return rate of turbochargers and helps to build up your reputation. HIGHLIGHTS Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos Includes adapters for installing turbochargers with lower oil inlet and reverse rotation turbines Oil system with oil heating allows to recreate similar conditions to the real one during balancing. The turbocharger rotation and measurement is automatic. The cycle includes acceleration to maximum speed, measurement during the cycle, and air shutdown. Emergency shutdown is provided in case of extreme vibration increase, which prevents cartridge destruction even in case of assembly errors Automatic cycle allows to carry out vibration measurement in a short and sufficient period of time. Vibration measurement of the turbocharger housing - up to a value of 10G, which 2 times better than other analogs. KEY FEATURES • car and truck turbocharger balancing • Any turbocharger installation • All type turbocharger adapters • Reverse rotation adapters • Balancing speed up to 300 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Automatic cycle turbocharger balancing • An industrial fanless touch screen pc control system • Access to self-editing of the data base • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum compressor wheel diameter 120 mm Maximum rotation speed 300 000 rpm Pneumatic system operating pressure 0,8 – 1,0 MPa Minimum air receiver volume 1000 L Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1274 mm Weight 285 kg We manufacture fuul range turbo repair equipment. Please contact us to get more info! 👇

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. Podpfon E N E Esx Adkegp HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: new, ATP-1000 tester can be successfully used in companies engaged in turbocharger repair, as well as in car repair services offering a wide range of repair works to determine the cause of turbocharger malfunction. It is also suitable for companies supplying electronic actuators. The tester checks the functionality of the actuator as a whole and its individual elements such as the position sensor and servomotor. Separate diagnostics of each element allows you to accurately determine the condition of the turbocharger actuator and detect a problem, if one exists. The ATP-1000 is easy to use and allows you to quickly check the condition of the actuator and its components. This has made it an effective tool for monitoring the functionality of actuators. HIGHLIGHTS Testing of electronic actuators for turbochargers Programming (adaptation) of SIEMENS electronic actuators Testing of 12V DC motors up to 2A Testing of boost solenoids used in pneumatic systems Testing of electronic and pneumatic actuator position sensors Works with all common types of actuators and similar in principle of operation. Communication protocols: PWM, CAN, ADC, SENT. Pedpfxen E S T Uo Adkegp KEY FEATURES • Protection of the device by current 2A for 3 seconds • Automatic detection of DC motor polarity inside the actuator • Tooltip for color-coding the cable to the selected actuator type • Display position sensor readings as a percentage • Display of additional parameters of HELLA programmable actuators: firmware number, programmed angle value • Portable version for testing directly on the vehicle • USB control of actuators, when working together with the software of GEOMET-2000 turbo flowbenches. • Regular updating of the tester firmware СABLES Set of diagnostic cables for actuators 12 pcs. Set of diagnostic cables for position sensors 6 pcs. Cable set for uncommon turbines 11 pcs. USB cable 1 pc. Cable AC/DC 12V, 4A power supply 1 pc. !!!! If you are looking for an electronic actuator programmer, ask me.

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction Pgjdpfx Adewk Ittekjp The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry Pgodpevtn Hmjfx Adkjp - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: new, Dynamic Hard-bearing Balancing Machines of the 9D716 series have originally been designed to meet the needs of a wide range of customers. They are undoubtedly the best solution if you need to balance a wide range of rotor types, weights and sizes. This has led to their use in a wide range of industries. The machines have many unique technical solutions that allow you to set up and balance complex rotors in the shortest possible time without losing the accuracy of the unbalance detection. MACHINE HIGHLIGHTS • The specially designed rollers use advanced patented Exact Barrel grinding technology and are mounted on precision bearings. • The monolithic design of the supports and base eliminates vibration losses during balancing by reducing the number of "oscillating system" elements. • Allows large initial unbalances to be measured without destroying the machine, and rotor unbalance to be corrected directly on the machine. • The low natural resonance frequency of the supports allows the rotor to be balanced at low speeds. • The width of the support rollers and roller block allows the installation of rotors with very short rotor bearing journals. The modular design allows rotors with unusual configurations to be mounted using spacers or tools. Pgsdjn Hwqvepfx Adkjp • The height of the roller block is adjustable, allowing rotors with different journal diameters to be balanced and the rotor to be centred during machine set-up. • The unique "Micro-Tuning" technology eliminates the effects of axial slippage during rotation. • The belt drive has a patented "long stroke" design that allows any rotor to be rotated using only two drive belts. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MACHINE DESIGN OPTIONS • Axial drive that uses a cardan shaft. Capable of transmitting high torque from the electric motor to the rotor. This type of drive is used for parts with high aerodynamic resistance or special design features (e.g. augers). • Drilling module for unbalance correction of the rotor without removing it from the machine. Convenient to use to increase the productivity of the operation. • Extended machine bed. The base of the machine can be made for any length of rotor. In our practice we have had machines for rotors of 12 metres in length. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • World-leading functionality and accuracy. SPECIFICATIONS Weight range of balanced rotors 5 - 500 kg Maximum rotor diameter (above the bedding) 1300 mm Diameter of rotor support journals 30 - 180 mm Distance between centres of rotor support journals 200 – 2000 mm Support type Rollers Transmission element for rotor rotation Belt / Cardan Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 4.0 kW Parameters of the supply network 380V, 3 Ph, 50Hz

Condition: new, Turbocharger core balancing machine DBST-20 Low-speed turbocharger core balancing machine meets the needs of turbocharger repair workshops. Machine is used for balancing common truck and passenger car turbos. It is multi-functional and universal, so it is suitable for many large turbochargers of special vehicles, railroad and marine turbines, and even for industrial turbochargers of gas and diesel power plants. The DBST-20 is used for balancing common truck and car turbochargers. It is multifunctional and universal, so it is suitable for many large turbochargers of special vehicles, railway and marine turbines, and even industrial turbochargers of gas and diesel power plants. This stand allows for the final balancing of cartridges due to the specific design features of large turbines. The stand is used for balancing turbocharger cartridges at low speeds, as well as for checking turbocharger cartridge oil leaks. This is a larger version of the DBST-10 model that our company has developed specifically for large turbochargers weighing up to 30 kg. HIGHLIGHTS High accuracy of determining the unbalance of the rotor (0.4 g ∙ mm / kg). Reinforced torsional vibration suspension - high accuracy of vibration transmission, quality balancing results. Mounting the cartridges on their standard surfaces (as on the engine) allows the installation of almost all turbochargers. Wide range of accessories and adapters for installing any kind of turbos. Includes adapters for installing turbochargers with lower oil inlet. Oil system with oil heating allows to recreate similar conditions to the real one during balancing. 3-stage system of oil filtration allows to eliminate an unbalance directly on the machine by portable grinders. The measuring system displays the balancing process in real time and monitors the rotor unbalance behaviour on the screen to achieve the best possible result. Rotor adjustment and machine calibration are performed by the operator, ensuring maximum machine sensitivity at all times. Safe turbo shaft speed allows risk-free quality running-in of assembled cartridges, which significantly increases cartridge reliability after repair. KEY FEATURES • High accuracy 2 plane balancing • Truck and car turbocharger balancing • Any turbocharger can be installed • All type turbocharger adapters included • Quick and easy turbo core installation • Balancing speed up to 10 000 rpm • Fast oil heater and temperature regulation • 3-stage oil filtration • Real-time unbalance measurement • Calibration of the machine by the operator • Industrial fanless touch screen PC control system • Creation and printing of reports on turbocharger balancing SPECIFICATIONS Maximum turbocharger weight 30 kg Maximum turbocharger diameter 300 mm Maximum turbocharger length 300 mm Maximum rotation speed 10 000 rpm Minimum achievable residual specific imbalance, 0,4 g mm/kg Pneumatic system operating pressure 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1120 х 780 х 1350 mm Weight 285 kg Pgsdpfen Nxcfjx Adkep

Condition: good (used), Year of construction: 1996, REF: MM5685 1 x Sorma Group automatic punnet netting machine. Manufacturer - Sorma Group. Pgjdot Evzropfx Adkep Model - PK8. Serial number - 1095. Date of manufacture - 1996. Speed - 35 packs/minute. Adjustable width of infeed conveyor by removing guides - 120mm to 140mm. Overall dimensions - 3.4m L x 1.1m W x 1.8m H.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Tsunezawa Group automatic filleting machine that can be operated by 1 person. This is a specialised, high-efficiency filleting machine designed for salmon processing, specifically to remove the belly bones while producing a three-piece fillet (three-way filleting). Manufacturer - Tsunezawa Group Co., Ltd. Model - TAF-BG Filleting Machine. Date of manufacture – 2019. Throughput – 20 to 30 fish / minute, depending on fish size. Processing capability – can handle fresh salmon and thawed salmon down to -4C. Electrical requirements – 400 V / 50 hz / 3 phase. Power consumption – 3.45 kW. Overall dimensions - 2300mm long x 1550mm wide x 1800mm high. Weight – 1,000 kg (approx.). Condition – Very good - last used for production in summer 2025. Pgodey Rimzspfx Adksp Supplied with User Manual and spare knives.

Year of construction: 2026, condition: used, The latest generation device for surface cleaning. It is ideal for cleaning paints, oils, dirt, rust, tarnish, resin, etc. The laser is used wherever standard cleaning techniques have failed. Laser cleaning does not cause abrasion, is non-contact and does not overheat the material. The latest generation device for surface cleaning The cleaning device is easy to install and extremely easy to use. It is ideal for cleaning paints, oils, dirt, rust, tarnish, resin, etc. The laser is used wherever standard cleaning techniques have failed. Laser cleaning does not cause abrasion, is non-contact and does not overheat the material Environmentally friendly Cleaning surfaces with a laser device is not only extremely effective, but also environmentally friendly. No chemicals are used during the cleaning process, thanks to which the cleaned material is not subject to chemical corrosion. Accuracy and no material damage The device can clean very sensitive surfaces such as aluminum, carbon, stainless steel, carbon fiber reinforced polymer or coated materials. By increasing the strength of the beam, we can also make the treated surface rough. The usefulness of the machine for cleaning with a fiber laser allows it to be used in various industries. Technical parameters Pgedezp Ealspfx Adkep Laser power 2000W Total Power 4kW Power 400V Scan frequency range 10 - 100Hz Cable length 7m Pulse frequency 5 - 100 kHz Weight 180 kg Dimensions 700 x 1200 x 1250mm The possibilities of the cleaning laser paint removal cleaning of welds tire cleaning rust removal laser degreasing degreasing of molds removal of the oxide layer restoration of stone elements cleaning screw drives removing paint from castings removal of corrosion of rotor blades removing corrosion from gears The price is a net price. Price does not include shipping costs. PLEASE NOTE!!! This machine is a returned item; it is second-hand but in working order. NO WARRANTY AND NO RETURNS!!

Condition: excellent (used), 2-tank metalparts-cleaning machine usable length: 800 mm usable width: 600 mm Pgodpfxezndnlj Adkop usable hight: 400 mm loading capacity: 150 Kg. volume of washing-tank: 1.000 Ltr. volume of flush-tank: 1.100 Ltr.

Condition: new, Year of construction: 2026, CORMAK CL300 Pulsed Laser Cleaning Machine 300W The CORMAK CL series pulsed laser cleaners are industrial devices designed for fast, precise, and non-contact removal of contaminants from metal, non-metal, and wooden surfaces. Depending on the application requirements, three power variants are available – CL200, CL300, and CL500 – all based on JPT MOPA pulsed fiber laser sources. This ensures high process stability, a wide range of parameter adjustment, and the ability to work both with delicate components and more demanding surfaces. Technical Specifications Parameter Value Dimensions (W × H × D) 260 × 460 × 490 mm Weight 31 kg Laser Source Brand JPT Fiber Interface QCS Operating Mode MOPA Laser Wavelength 1064 nm Maximum Pulse Energy 5 mJ Fiber Cable Length 5 m Laser Pulse Frequency 1–3000 kHz Pulse Duration 13–500 ns Laser Spot Size 7 ± 1 mm Laser Line Length 0.01–150 mm Laser Line Width 0.01–150 mm Process Gas None required Scanning Area (Lens) 130 × 130 mm, F254 Cooling System Air-cooled Scanning Speed 0–30000 mm/s Operating Temperature 10–30°C Operating Humidity < 70% non-condensing Operating Voltage AC 230 V, 50/60 Hz Efficient and Precise Surface Cleaning CORMAK laser cleaning systems effectively remove: rust, paint coatings, varnishes, operational deposits, oxides, oil residues, resins, and other difficult contaminants. Thanks to adjustable pulse energy, frequency, and pulse duration, the cleaning process can be optimized for both: precise and selective cleaning of molds, dies, tools, and precision components, and efficient preparation of larger surfaces for further processes such as welding, painting, or bonding. The non-contact nature of laser cleaning minimizes the risk of mechanical damage, microcracks, or deformation of the base material. Advanced JPT MOPA Technology The use of JPT MOPA laser sources provides a wide adjustment range for pulse frequency and pulse width, allowing optimal energy density settings depending on the type of contamination and the base material. The long fiber cable increases working flexibility at greater distances from the main unit, which is especially useful when working on: large structures, production lines, installed machine components, steel constructions, molds, facades, and industrial equipment. All CL series models operate at a wavelength of 1064 nm, ensuring high effectiveness on common industrial materials such as: structural steel, stainless steel, aluminum alloys, and many other technical substrates. Cost-Effective and Environmentally Friendly Operation The CL series devices are air-cooled and do not require process gases or abrasive materials, which: simplifies installation, reduces operating costs, minimizes maintenance requirements, and makes the cleaning process more environmentally friendly. Pgsdjy Sgn Sopfx Adkjp High scanning speeds combined with adjustable beam parameters significantly reduce processing time compared to traditional methods such as: sandblasting, shot blasting, or chemical cleaning, while ensuring repeatable results and a high-quality surface finish after cleaning.

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper Podpfxjzmbi Rj Adksgp Condition: Ready for use and fully functional Technical condition: normal Front tire size: 3.00-4 Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible for us at any time. We also gladly buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Working width: 750 mm; Effective sweeping width: 1100 mm

Condition: used, functionality: unexamined, Year of construction: 2012, Available for shipment. Machine is operational condition. Ask for additional information including photos and pricing! Pgodpfx Aoyup R Todkop

Year of construction: 2023, condition: new, INTERSONIK is established in 1988 and since then manufacturing industrial cleaning machines both ultrasonic type and sprayed type. INTERSONIK always has high standards and aims to provide solid and durable products to its customers. Ultrasonic washing machines are designed and manufactured with the 30 year of experience and engineering that belongs to INTERSONIK from A to Z. K model ultrasonic cleaning devices are perfect parts washing systems for degreasing and precise cleaning. Some Details About Ultrasonic Machines: -28 Khz ultrasonic frequency -AISI 304 or AISI 316 Stainless Steel -Automatic fill valve -Liquid level control -Pump filter -Unlimited basket options -Unlimited size and number of tanks -Many other options and extras ultrasonic washing machine, ultrasonic cleaner, ultrasonic degreaser, ultrasonic for automotive, ultrasonic for coating industry, 28 Khz ultrasonic cleaner Pgsdpsd Iz Dnjfx Adkop Please feel free to contact us for details and other choices.

Year of construction: 2023, condition: new, INTERSONIK MINISONIK series provides fast, reliable and economic solution in parts washing! Perfect parts washing systems for degreasing and precise cleaning Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Minisonik ultrasoniks washer are available in 4 different size, 4l , 12l , 18l and 28 liter versions. All minisoniks are ready for delivery. Minisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check the technical specifications in the attached document. ultrasonic cleaner, 18 liter ultrasonic cleaner, 12 liter ultrasonic cleaner, 4-liter ultrasonic cleaner, 28-liter ultrasonic cleaner, tabletop ultrasonic cleaner, benchtop ultrasonic cleaner Pgedpjd I Dnvefx Adkep Please feel free to contact us for further details

Year of construction: 2023, condition: new, INTERSONIK MIDISONIK series provides fast, reliable and economic solution in parts washing! Intersonik ultrasonic cleaners are perfect parts washing systems for degreasing and precise cleaning. Operation Principles: High frequency (25 kHz) which is obtained in liquid, creates millions of microscobic air bubbles loaded with vacuum energy, strike to dirty surfaces and explode and so oil, chip, carbon, lime, blood tissue are removed. Midisonik ultrasonic washers are available in 4 different size, 40l , 50l , 60l and 80 liter versions. Midisonik’s Standarts: - Machine is produced completely in stainless stell - Timer is mechanical or digital [optional] - Operation temperature is controlled by mechanical or digital thermostat (optional) Application Areas: ► Automotive spare parts cleaning like injector elements, pump’s elements, spark plug etc. ► At hospitals, clinics, laboratories, medical materials and surcigal instruments. ► Dentist’s instruments. ► Jewellery products. ► Electronic components and PCB cards. ► Textile industry equipments. Please check technical spesifications in the attached document. ultrasonic cleaner, ultrasonic washing machine, 40 liter ultrasonic cleaener, 50 liter ultrasonic cleaener, 60 liter ultrasonic cleaener, 80 liter ultrasonic cleaener, ultrasonic cleaner for automotive, ultrasonic degreaser Psdpjd I Dpdefx Adksgp Please feel free to contact with us for further details.