Used Wa Wille 305/210/H110 Mm for sale (78,732)

Condition: good (used), Compressor control, compressor control, control panel, control box, control unit Lajdpfx Aljg Td D Hoyjh -Manufacturer: WA Wille Automationstechnik, control box control unit -Type: unfortunately no type designation -Dimensions: 305/210/H110 mm -Weight: 4.2 kg

Condition: good (used), Cast iron marble plate Length: 3500 mm Width: 2500 mm Thickness: 300 mm Height on feet: 900 mm Delivered with 12 leveling feet Weight : 6,3 T Laodpfx Alsz H Iymjyjh

Condition: like new (used), Year of construction: 2015, load capacity: 1,000 kg, lifting height: 5,050 mm, construction height: 2,900 mm, operating hours: 3,183 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + S - 2W5050 ID: 25053.2983 Category: Used Mast: 2W Lowered height: 2,900 mm Lifting height: 5,050 mm Capacity: 1,000 kg Laedpfjzq Udvsx Alyjh Platform height: 4,250 mm Picking height: 5,850 mm Initial lift: Yes Cabin width: 1,000 mm Year: 2015 Hours: 3,183 h Battery capacity: 48 V / 465 Ah Options: - Side guidance / Rail guidance

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system 3 identical paternosters are available External dimensions: Height 6500 mm Width 3670 mm Depth 1560 mm 46 supports with a payload of 305 kg each In the clear usable dimensions: H = 210 mm W = 3050 mm D = 520 mm Chain pitch 254 mm Additionally available: 46 intermediate shelves for halving the usable height Total payload up to 14200 kg Ljdpfx Alerw A Eioysah Storage table at 1000 mm above floor level with stainless steel worktop Color: GRAY / DARK GRAY, surface cleaned, signs of wear possible Drive motor power: 1 x 5.5 kW / 400 volts Subject to errors and technical changes. Details may vary from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, plate width 3200 mm plate depth 2000 mm plate height 210 mm weight of the machine ca. / t Clamping plate Lsdpfx Aeud Ipqjlyoah Dimensions: 3200 x 2000 x 210 mm T-slot dimensions: ? x ? x ? (H)

Condition: good (used), Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch Lajdpfx Ajyffm Eslyjh -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Simatic OP7, number of rollers: 4, roller (bottom) diameter: 470 mm, roller (top) diameter: 530 mm, side roll diameter: 400 mm, roller diameter: 530 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 2,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 65 mm, sheet thickness stainless steel (max.): 50 mm, overall weight: 40,000 kg, total length: 6,000 mm, total width: 2,900 mm, total height: 2,900 mm, power: 55 kW (74.78 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 4, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, plate bending roll capacity 3000x50 mm Davi modelMCB3053 Hydraulic 4 roll plate bending machine, year 1998 plate width 3000 mm thickness rolling 50 mm pre-bending 40 mm width on the rolls 3100 mm upper roll size 530 mm lower roll 470 mm side rolls 400 mm Power electric 70Hp on hydraulic unit voltage 380/50 Lsdpfx Aey D Ngzslysah - Installed configuration Hardened surface of the 4 rolls conical bending attachment – hardened cone bending Console electric with digital position readout of the rolls Controller Siemens Simatic OP7 NC programmer for automatic rolling Hydraulic power driven the central rolls with axial gearbox Pre-pinch pressure adjustable plate edge pre-bend. Drop-end open front for unloading closed shells Rerolling system for calibration roundness of welded shells. Safety and emergency system installed. Manuals original for operation and maintenance Dimension 6000x2900 x h 2900 mm weight 40000 kg

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Overhauled tensioning machine 2025 - for blades with widths up to 210 mm - mounted on a sliding carriage with flywheel drive for tensioning along two parallel lines along the blade length - tension pressure adjustable and controllable gradually - includes a hammer for correcting possible imperfections, with straightness ruler (flatness) - 0.75 kW motor Lodpfx Aew Ewd Dolysah - table with 4 legs for supporting the blade

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Walter, face milling cutter head Lajdpfxowbn Ewe Alyoh -Type: WA ER 06 Ø315 mm -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate Lodpetp Rfhefx Alyjah -Mounting plate: with dovetail guide -Clamping surface: 1955 x 1040 mm -Height: 110 mm -Dovetail: 27 to 45 mm / 35 mm high -Pin opening: 47 x 47 mm -Quantity: 2x mounting plates available Price: per piece -Transport dimensions: 1955/1040/H110 mm -Weight: 1288 kg

Condition: excellent (used), Faceplate (28665) Diameter: 305 mm Manufacturer: TG Laodpfx Aloxazn Hoyoh Height: 90 mm T-slot width: 18 mm Jaw height: 48 mm Center bore diameter: 178 mm Bolt circle diameter for mounting screws: 178 mm For M12 screws Weight: 34 kg

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 21 mm, turning diameter: 210 mm, turning length: 580 mm, total length: 1,200 mm, total width: 500 mm, total height: 550 mm, spindle speed (max.): 1,710 rpm, spindle speed (min.): 140 rpm, overall weight: 120 kg, spindle motor power: 550 W, OFFER OF THE WEEK – 5% DISCOUNT! UNIVERSAL LATHE TYTAN 580 210 × 580 mm The Tytan 580 is a very reliable lathe designed in a simple and logical way. It is suitable for home workshops, educational workshops, and industrial use. Laedpfx Aljyrrzcjysh THE LATHE DOES NOT INCLUDE A STAND THE LATHE IS IN STOCK AND AVAILABLE FOR IMMEDIATE SHIPPING Technical Specifications Turning diameter: 210 mm Distance between centers: 580 mm Spindle speed: 140 – 1710 rpm Number of speed ranges: 6 Spindle taper: MT3 Spindle bore: 21 mm Tailstock taper: MT2 Tailstock quill travel: 65 mm Longitudinal feed: 0.04 – 0.2 mm/rev Metric thread pitch: 0.4 – 3 mm/rev Inch thread pitch: (16) 8 – 48 TPI Motor power: 0.55 kW / 230 V Weight: 120 kg Machine dimensions (L × W × H): 1200 × 500 × 550 mm Standard Equipment 3-jaw chuck – 125 mm Drill chuck Chuck guard Tool post guard Set of cutting tools Arbor Delivery to the customer is possible. Shipping costs are calculated individually by the transport company.

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg Ljdpfxocfyghj Alysah

Condition: used, Clamping table, clamping angle, dividing head, dividing head, rotary table, milling machine table, clamping angle with three-jaw chuck, clamping angle with lathe chuck Lsdpfx Aloitt R Doyjah -Round table. with three-jaw chuck -Chuck size: Ø 210 mm -Spindle bore: Ø 64 mm -Center height: 150 mm -Dimension: 310/250/H260 mm -Weight: 47 kg

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons Lodsx Dtt Aopfx Alysah The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Approx. 1,000 – 1,500 units, transparent storage boxes, L: 350mm, W: 210mm, H: 200mm - used: Price per unit, ex warehouse: €3.50 (net), plus €5.00 / wooden pallet! Price for complete purchase: €3.00 (net) / unit, plus €5.00 / wooden pallet! Lasdpfx Aozxcnxjlysh Minimum purchase quantity: 198 units (2 pallets) Manufacturer: Mixed, predominantly Promat MK3 (now Tecwerk) Type: Transparent storage boxes Year of manufacture: unknown Color: Blue and yellow, significantly more blue External dimensions: approx. L: 350mm, W: 210mm, H: 200mm Internal dimensions: approx. L: 280-300mm, W: 190mm, H: 190mm Weight per container: approx. 650g Load capacity: 20kg Packing dimensions: 1200 x 800 x 2000mm Condition: Dry, slightly dusty, scratches, some with QR codes, remnants of labels present Available: immediately Location: 78234 Engen

Condition: good (used), diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump, diesel generator, diesel generator -Manifold: from generator MWM RHS 518V16 -Dimensions: see photos Lajdpfx Asivqmlolyjh -Total dimensions: 800/210/H70 mm -Weight: 8.7 kg

Condition: used, Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed Laodpshhf Aiefx Alyeh -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Heat exchanger: Oil cooler, shell and tube heat exchanger Laedpfx Aeyzn Dtelysh -Connections/Dimensions: see photos -Dimensions: 1005/1600/H110 mm -Weight: 13.5 kg

Year of construction: 2017, condition: used, General information Year of manufacture: 2017 Mileage: 99.451 km Field of application: Grounds care Technical information Power: 110 kW (150 HP) Type of fuel: Diesel Weights Empty weight: 1.600 kg Carrying capacity: 2.145 kg GVW: 3.745 kg Environment Emission class: Euro 6 Condition General condition: good Technical condition: good Visual appearance: good Additional information Please contact Christian Theißen for more information Manufacturer: Audi Model: Audi A4 Avant / emergency vehicle hatchback Year of build: 2017 Condition: Used Lajdpfx Aljzh Uyxjyeh Data: First registration: 07/2017 Fuel type: Diesel Mileage: 99.451 KM Gear type: Automatic Engine power/displacement: 110kW / 1968 cm³ Total permissible weight: 2.145 kg Empty weight: 1.600 kg Length: 4726 mm Width: 1842 mm Height: 1393 mm Environment badge: Green / Euro 6 Colour: white Equipment: Automatic front flashers, automatic air-conditioning, seats: 5, airbag, power window and power side-view mirrors, central locking system, ABS, ESC, radio, power steering Information: Equipment set-up: detachable emergency light and siren, hands-free system for mobile phones Location: 41468 Neuss immediately available

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Ljdpfouqgbtex Alyeah Sawing range at 90° round 210 mm flat 240 x 190 mm square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 2002, For sale: a professional hydraulic guillotine, AMADA PROMECAM GX 630, manufactured in 2002. Reliable industrial guillotine shears designed for precise sheet metal cutting. Maximum cutting length: 3050 mm, steel thickness: up to 6 mm. The machine is connected and fully operational; it can be inspected, tested, and trial cuts can be performed. Lasdpfez A Amgjx Alyjh New cutting blades were replaced approximately two years ago. The guillotine cuts accurately and cleanly. Key Information: Manufacturer: AMADA PROMECAM Model: GX 630 Year of Manufacture: 2002 Serial Number: C020110 Working Length: 3050 mm Max. Steel Thickness: 6 mm Cutting Force: 197 kN Power: 5.5 kW / 7.5 HP Power Supply: 400–415 V / 50 Hz Current: 16 A NC Control and Back Gauge The machine is equipped with an AMADA NC controller, allowing the operator to set the required cutting dimension and the number of cuts. The programmable back gauge, up to 1000 mm, automatically adjusts to the required position, making it convenient to perform repetitive cuts of the same size. Equipment: AMADA NC control system Programmable back gauge up to 1000 mm Hydraulic sheet clamping system Adjustable blade gap according to the thickness of the sheet being cut Front table extension for large sheets Front sheet support Foot pedal control New cutting blades, replaced approximately 2 years ago The machine is connected and fully operational; it can be inspected and tested. If you have any further questions, please do not hesitate to ask.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lowered suspension Equipment: - Spare wheel - LED lighting - Approach angle 10° Net price: €7,865.55 / Gross price: €9,360.00 Article number: A3T235502100.01 Technical data: • Brand: Brian James • Model: A Transporter • Vehicle type: Car transporter • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 500 x 210 x 0 cm • External dimensions (LxWxH): 672 x 249 x 69 cm • Loading height of the floor: 52 cm • Permissible total weight: 3,500 kg • Unladen weight: 855 kg • Payload: 2,645 kg • Chassis: Low loader (wheels beside the body) • Tires: 155/70R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum alloy wheels in anthracite • Low frame design enables an extra low loading height of 520 mm • Very stable, welded steel frame • Vehicle designed for all options even after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, etc. can be retrofitted at any time • Closed loading area made of durable and robust phenolic resin plywood with an anti-slip surface. • Front floor storage box with lock and spring-assisted lid • Pattern of holes for wheel tracks made of galvanized steel • Numerous lashing points and a highly load-bearing floor offer flexible lashing options as well as perfect grip. • Side panels color: black • Frame completely hot-dip galvanized • Easy-to-extend, roller-mounted (Easy-Glide) loading ramps (2000 mm) ensure an extremely flat loading angle • Fold-out, spring-assisted support legs complement the extendable ramps. Can be folded in and out with your foot within seconds • Rear supports with dual function: When unfolded, they support the load, and when folded in, they securely lock the ramps in their position during transport. • Spare wheel mounted • Reverse driving automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar REINFORCED • 13-pin connector • Reversing light • Large LED safety lighting • Complete LED lighting: Extremely bright, durable and reliable. • Robust protection of the rear lights • Integrated rear fog light • Support wheel in the center • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Lajdpjzy A Nxofx Alysh Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale excepted -

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CE Glass 2100mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New water suction rubber, new bearings. Working direction: from right to left Max glass height: 2100mm Number of brushes: 4 (also for Low-e glass) Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor Lsdpfx Alexb N Rfsyoah The machine is fully inspected, cleaned and in perfect working order and can be viewed on our premises!

Condition: good (used), Technical specifications: Working length: 2100 mm Max. bending capacity: 10.0 mm Laedpfx Alswchn Ueyjh Pre-bending: 8.0 mm Top roller diameter: 200 mm Bottom roller diameter: 180 mm Number of driven rollers: 3 Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 5.5 kW CE mark Dimensions (length x width x height): approx. 3100 x 1150 x 1250 mm Weight: approx. 4 tons Accessories: Several roller sets for pipe and profile rolling The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.