Used Weber Schraubautomaten Screwdriver for sale (633)

Condition: used, Year of construction: 2016, Parts of a screwdriving station. This was only used in test operations. These consisted of two screwdriving units mounted on a robot gripper. The system was used to screw battery components together. Built in 2016, the system was in storage for the past few years and then sold by Audi. The screw used is approximately 72mm long and M6. Rexroth parts (installed twice): 0 608 720 039; i= 6.74; w=85% Ijdpfx Acewh Nu Tjroic 0 608 820 113; Type: 3DMC060; 60Nm 0 608 701 017; max. 20,000 rpm; 3~ 0-230V, max. 14A; 0.11Nm/A 0 608 810 021 0608 810 037; Type 3ULG; i=1; efficiency 95% Weber: 1x ZEL 360 conveyor 1x control unit as shown Everything as shown, inspection requested, as it is unclear whether the system is complete.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Iiedpfx Acjx Twcpersc

Condition: like new (used), Year of construction: 1990, Wide belt sander WEBER OFZ-2-1350 working width 1350 mm number of aggregates 2 1. sizing roller with the engine with power 18,5 kw 2. aggregate with the viscera with the power 11 kw brush with the power of 11 kw Ijdpfx Acogm Tqworeic sweeping brush smooth regulation of feed speed weight of the machine: 2700 kg

Condition: ready for operation (used), Weber 1117033 04.07 screwdriving unit 438612/KW - Length: 48 cm, used, in good condition, 100% functional, delivery as shown in the photos. Iiodpfxex Dxq He Acroc

Condition: new, Diamond Weber WM 306791 A/R0 3 diamond tool , serial no. according to photo ,unused in original box, 100% functional, scope of delivery according to photos Iisdpfoi D Upksx Acrsc

Condition: good (used), Year of construction: 2014, approx. 8-10 units, labeling machine incl. printer – used: Price per unit, ex works: only €3,950.00 (net)! Price for the unit, year of manufacture 2023: €4,950.00 (net)! Manufacturer: Weber Type: Legi Air 4050EG, and e.g.: 4050E CC (Gen. 3 – year of manufacture 2023) Year of manufacture: 2014 Serial number: e.g.: 50001222 Includes stand and applicator (partially side-mounted, partially top-mounted) Condition: good Available: from approx. Q4/2026 Location: Hamburg Iiodpszbylhsfx Acrsc

Condition: good (used), Year of construction: 2014, Approx. 4 units of compact label dispensers for applying pre-printed labels, Weber, Alpha Compact – used: Price per unit, ex-works: only €2,950.00 (net)! Manufacturer: Weber Type: Alpha Compact Year of manufacture: 2014 Includes stand and applicator 100 – 240VAC Condition: good Ijdezbylbepfx Acroic Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), WEBSITE HYDRAULIC RESCUE SET WEBER HYDRAULIK DIN 14800 H2 For sale: Professional hydraulic rescue set by WEBER HYDRAULIK, used in technical rescue operations by fire brigades, emergency services, and industry. The set includes: - Manual hydraulic pump - 2 hydraulic cylinders / spreaders - Hydraulic hoses - End fittings, adapters, extensions - Spreading and supporting elements - Original transport case Ijdpfsyxtcvex Acrjic - Documentation as shown in the photos Technical data: Manufacturer: WEBER HYDRAULIK Set type: Hebesatz DIN 14800 H2 Working pressure: 630 bar Lifting force: 80 kN or 150 kN Condition: Used Condition: - Fully operational - Complete set as pictured - Normal signs of use, paint abrasions - Stored in transport case Additional information: - Professional equipment - Ideal for workshops, technical service providers, emergency services, or collectors - Shipping or personal pickup available

Condition: used, boneless meat, sausage, cheese, or fish 400V, 50 Hz/3/N/PE 32A approx. 10 kW compressed air connection values: min. pressure 4 bar cutting system sickle blade: max. speed at blade head WSK 2,000 min-1 Drive: feed, cup, portioning unit CCU: servo motors Drive power transmission: toothed belts Feed power transmission: precision ball screw drive Cutting thickness: 0.1 to 100 mm (depending on product and cutting capacity) product passage width: adjustable up to max. 380 mm product passage height: adjustable from 125 to max. 180 mm (optionally up to 200 mm) programming: dialogue via touch screen program memory locations: 100 2 sickle blades total dimensions (L x W x H): ± 3,000 x 1,600 x 2,700 mm + "Wibotec" single-pan weighing scale Type Continuous checkweigher 200 - Web 99T 355 -365 Web Module Length: approx. 485 mm Width: approx. 535 mm Weight: approx. 150 kg Power transmission of the drives: gears 9 g - 3750 g + Monosorting rocker Type CCR Length: approx. 450 mm Width: approx. 380 mm Weight: 250 kg Drive power transmission: toothed belts Iiedpfxozcl Nbs Acroc Motor type: asynchronous motors or servo drives, depending on the slicer type + Conveyor belt Type CCE total dimensions (L x W x H): ± 4,100 x 960 x 1,500 mm drive power transmission: toothed belts motor type: asynchronous motors or servo drives

Condition: excellent (used), CATALOG NUMBER 7910 TECHNICAL DATA - Max. working width: 1350mm - Max. working height: 150mm – From above: - Rubber pressure roller I unit (metal grooved roller for calibration) II unit (two smooth metal rollers + sequential sanding pad) - Rubber pressure roller - Cleaning brush – From below: Iisdpfxsy T Ip Te Acrsc - Infeed roller, metal - Feed belt - Outfeed roller, metal, slip type - Pneumatic belt oscillation with photocell control - Electric table lifting - 2 feed speeds: 2–14m/min - Main motor: 5.5/15 kW - Brake - Grinding height potentiometer - Feed motor: 0.75kW - Working pressure: 8 bar - Extraction nozzle diameter: 200mm, 120mm - Dimensions (L/W/H): 1860x2200x1980mm - Weight: 1995kg ADVANTAGES – German-made – Unpainted – DTR technical documentation included – Used sander, in very good condition Net price: 38,900 PLN Net price: 9,260 EUR based on 4.2 EUR rate (Prices may change with significant rate fluctuations)

Year of construction: 2017, condition: excellent (used), Bluhm weber legi-air 4050 labeling machine More pieces in stock! year built: 2016-19 Print resolution 8 dots/mm (203 dpi) 12 dots/mm (300 dpi) 24 dots/mm (600 dpi) Print speed Up to 400 mm per second Tamp sizes (mm) Tamp-Blow standard of 12.5 x 7 to 160 x 300 mm, label lengths must be limited in accordance with label quality, longer or smaller labels are possible using special tamps Label gap Minimum 3 mm Label roll 300 mm diameter, up to 450 running meters, core 76 mm (3"), outside winding (optional inside winding) Data interfaces RS232, RS422, RS485, Ethernet Optional: Profibus Dimensions (L x H x W) Iiodefp A I Ejpfx Acrjc 770 x 560 x 580 mm, Applies to system with 250 mm stroke Display controller Multi-language operator guidance 5.7" VGA touch display Service interval indicator Polling, editing and saving of label data USB connection for memory medium or keyboard Compressed air connection 6 bar, the compressed air must be clean, dry and oil-free

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm B-axis (table) 360.000 x 0,001° deg milling-head swivable +/- (HV) 360.000° deg pallet size: 1000 x 800 mm table load 3000 kg tool taper SK 50-B spindle turning speed range max. 8000 U/min transmission ratio 2 spindle drive (100/40 % ED) 37/50 kW feeds x/y/z -stepless 30000 mm/min total power requirement 100 kVA dimensions of the machine ca. 11555 x 7998 x 5050 mm Additional information Universal machining center 5 axes simultaneously Original purchase price: EUR 1.295.000,- First machine installation in September 2011. A geometry measurement report (dated 30. August 2025) is available. Equipment: CNC-control Siemens 840D Solution Line Isdpszazryefx Acreic Separate handheld control unit, wired, Siemens HT-2 2-station pallet changer with safety light barrier 110-position tool changer (max. tool length 600 mm) with 2nd Siemens 840 D control panel Tool taper cleaning system Special cabin with oil mist extraction system Coolant tank 3.300 liters, pump pressure 4 bar/50 bar (Q1/Q2) Chip conveyor Workpiece measuring probe Manual books Spare part: New ball screw. Note: The machine will be sold without tool holders, tools, and clamping devices.

Condition: as good as new (ex-display), The scope of delivery includes: 01x waste container, second choice Manufacturer: Weber Ijdpfoku Aw Nex Acrjic Depth lid closed: 755 mm Depth lid open: 770 mm Height 1,320 mm Lid closed Total width: 1,350 mm Capacity: 360 kg Volume: 770 liters Further data / information: Material color of garbage can: black Lid material color: yellow Usable width: approx. 1,085 mm Usable depth: approx. 640 mm Usable height: approx. 1,000 mm Material: polyethylene (PE) Tires: 4 tires (2x braked) Tare weight: 68 kg Note: Effective width and effective depth are tapered towards the bottom. General information about the item: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 1992, spindle diameter 100 mm x-travel 3500 mm y-travel 2500 mm total power requirement 44 kW Iiedpfey U N I Tjx Acrec weight of the machine ca. 38 t dimensions of the machine ca. 8,1 x 6,2 x 4,5 m

Condition: new, Year of construction: 2024, Facility managers and property managers know the problem: On the due date, i.e. when the garbage truck empties the garbage cans, all the garbage cans must be at the collection point. If the garbage cans are normally in the underground garage, the caretaker has to janitor has to take all the garbage cans up the ramp of the underground garage. up the ramp. This is time-consuming and exhausting or even impossible impossible. A 240 kg garbage can filled with waste paper can weigh over over 200 kg, a 1100 liter waste container even weighs over a ton. even over a ton. If this is the case, the janitor needs the help of a second person. This is cost-intensive. Weber offers time and health-saving solutions to this problem. Iiodpsi Nnrusfx Acrjc problem. Talk to us about our waste garbage can frames for 1100 liter waste containers and our waste garbage can trolleys for 120 and 240 liter garbage cans. By the way, battery-powered towing vehicles are of course also available from us. gentle on health effective 400 kg payload galvanized can be coupled together Professional device - not for public road traffic Adapter: Ball head Trailer hitch

Year of construction: 2009, operating hours: 14,793 h, condition: used, machine/vehicle number: 93.437.292, WEBER control system, X-axis: 1,350 mm, max. workpiece thickness: 90 mm, grinding dust extraction system PIONIER dust collector ZF-1 Eco, year of manufacture: 2008, serial no.: 081220, 7,000 m³/h, weight: 800 kg. Iijdpfx Acey T Ny Horec

Condition: used, mileage: 1,001 km, power: 4 kW (5.44 HP), gearing type: other, fuel type: diesel, color: yellow, first registration: 01/1999, Year of construction: 1999, driver cabin: other, Vehicle location: Bovenden, Hatz Diesel Engine E 673LS! Forward and reverse gear! Iisdpfx Acexy Swxerjc The exact year of manufacture and power output cannot be determined as there is no type plate present! Equipment details provided without guarantee; subject to change, prior sale, and errors!

Condition: used, mileage: 1,001 km, power: 2 kW (2.72 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 62 kg, first registration: 01/2018, Year of construction: 2018, driver cabin: other, Vehicle location: Bovenden. Honda GX R120 petrol engine! Accessory specifications provided without guarantee; subject to changes, prior sale, and errors reserved! Iiedpfx Acjxy Swrorec

Condition: used, mileage: 1,001 km, power: 3 kW (4.08 HP), gearing type: other, fuel type: gasoline, color: blue, empty load weight: 103 kg, first registration: 01/2017, Year of construction: 2017, driver cabin: other, Vehicle location: Bovenden, Honda GX 160 petrol engine! Includes rubber mat! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Iodoxy Sw Espfx Acroic

Condition: ready for operation (used), Year of construction: 2010, Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine. Machine frame and feed • Heavy-duty welded steel construction for 3 sanding units • Constant feed height: 900 mm • Control panel and sanding belt change on the left (in feed direction) • Continuously variable feed speed: 3–18 m/min, frequency-controlled • Vacuum conveyor belt version with 5.5 kW vacuum blower and vacuum channel to the top edge of the machineUnit 1: Cross-belt unit • Pressure lamella belt with felt and graphite • ISD link pressure bar system with 11 mm workpiece detection and 44 mm pressure bar width • Workpiece-controlled sanding belt blow-off deviceUnit 2: CBF combination unit • Grooved rubber contact roller Ø 130 mm, 60 Shore • Cross-feed lamella belt with separate 4.0 kW drive • ISA link pressure beam system with 11 mm workpiece detection and 22 mm pressure width (counter-rotating) • Workpiece-controlled oscillating sanding belt blow-off deviceUnit 3: Cross-belt unit • ISD link pressure beam system with 11 mm workpiece detection and 44 mm pressure beam width • Workpiece-controlled sanding belt blow-off deviceControls and functions • Siemens MP 377 12" Multi-Panel HMI: 12" color display, program memory for 300 programs, all parameters set via program • WEBER i-Touch control with rotary knob navigation • WEBER AWDM: automatic thickness adjustment at machine inlet with start switch • Over-thickness safety roller at inlet: automatic lifting of contact roller and segmented pressure beams; feed shutdown • ISA/ISD control: high-resolution workpiece detection in 22 mm increments; free loading of complex shapes; multiple loading with minimal spacing; adjustable grinding intensity and pressure via program • ISA linkage pressure beam system (Unit 2): pressure piece movable longitudinally and transversely • ISD segmented pressure beam system (Units 1 and 3): separate adjustable edge pressure (outer edge only or outer and inner edges); selectable for longitudinal and transverse edges or longitudinal onlyTechnical data • Working width: 1350 mm • Drive unit 1 (Eco-Drive, frequency-controlled): 15.0 kW • Drive unit 2 (Eco-Drive, frequency-controlled): 20.0 kW • Drive unit 3 (Eco-Drive, frequency-controlled): 15.0 kW • CBF drive: 3.0 kW • Vacuum blower drive: 5.5 kW • Anti-rebound feed (frequency-controlled): 3.0 kW • Height adjustment drive (frequency-controlled): 0.75 kW • Sanding belt speed (frequency-controlled): approx. 3–20 m/s Iijdpfx Acoy Twwysrec • Sanding belt size (cross belts): 2 × 150 × 5100 mm • Sanding belt size (wide belt): 1370 × 2620 mm • Workpiece thickness (min/max): 4–140 mm • Working height (constant): 900 mm • Stepless feed speed: 3–18 m/min Additional equipment • Workpiece ejection device with WEBER ES system (workpiece-controlled; energy-saving; individual slide control) • WANDRES micro-cleaning, single-brush version (power sword brush with integrated micro-moistening for optimal paint dust removal)

Condition: used, Slicer Weber CCS 304 Iijdpfjzcxnkex Acrsc The fully automatic Weber CCS304 slicer has been specially developed for slicing large volumes of meat, poultry, fish, and cheese. The machine is suitable for processing both fresh and cooked products, making it an ideal solution for medium-sized to large-scale food processing operations. Virtually all types of sausages and cheeses can be sliced without pre-freezing and arranged in either shingled (overlapped) or stacked portions. The slicer features a large product infeed with a maximum product length of up to 800 mm. Equipped with a large 460 mm blade, the machine can process a wide variety of products at speeds of up to 400 slices per minute. The intuitive touchscreen control system allows operators to easily program multiple slicing programs, enabling fast and efficient product changeovers. The machine is manufactured entirely from stainless steel. Technical Specifications - Production capacity: up to 400 slices per minute - Portioning options: shingled (overlapped) or stacked portions - Product infeed dimensions (W × D × H): 250 × 800 × 135 mm - Slice thickness range: 0.5–50 mm - Discharge height: 960 mm - Voltage: 400 V (3 + N, 50 Hz) - Power: 3 kW - Weight: 936 kg - Year of manufacture: 2007 - Machine dimensions (W × D × H): 3820 × 850 × 2120 mm

Condition: good (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. Iiodpjvgnr Ajfx Acroc - Arm spreader. - Hydraulic pump.

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. - Hydraulic pump. Iisdsvgnhwjpfx Acroc

Condition: excellent (used), I sell a set of hydraulic tools for rescue Weber- Hydraulic. - Hydraulic shears. - Arm spreader. Iiodpfevgnttex Acroc - Hydraulic pump.

Condition: used, functionality: fully functional, Year of construction: 2025, Weber Vibratory Plate CF 1 HD-III — Year of manufacture 2025 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Iiedpjy A Hbmefx Acrec Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 1,300 plus VAT | EXW Einbeck | Delivery upon request