Used Welding Device for sale (15,617)

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 52.693.00, feed length X-axis: 1,525 mm, feed length Y-axis: 1,525 mm, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, Welding Robot – Fully Equipped Vertical Bend Arm Robot 6 axes Reach: 1525 mm Equipped with automatic welding gun, type: DIX MALZ 520 Wire feed device, manufacturer: FRONIUS, type: ROB.VR1500 DINSE-ZA Includes 2 rotary welding tables Plate dimensions: each 1200 × 750 mm Pneumatically driven cleaning device Positioning and straightening station for the torch Current source, manufacturer: FRONIUS, type: welding device TPS 4000 Supplied with technical documentation Note: The machine can be transported on a standard truck. Technical Attributes Dimensions (L × W × H): approx. 4700 × 3500 × 3800 mm Weight: approx. 5000 kg Year of construction: 2000 Prjdpsrl S Ufefx Alweb

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Pedpfxeyqr Sxj Alworb

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Psdpfxjyrg H Hj Alworb

Condition: used, Plasma impulse gas metal arc welding machine, pulse machine EWM Type Tetrix 400 Plasma / Tetrix 400 DC-P Robot Psdezwb R Njpfx Alwjrb Plasma welding and soldering machine Art. No.: Serial No.: Year of manufacture 2003 Output: 400 amps = 40% duty cycle 360 amps = 60% duty cycle 300 amps = 100% duty cycle Setting range: stepless Open-circuit voltage: approx. 26 volts Mains connection: 400 volts, 50 Hz, 32 amps plug - Digital display for current - Digital display for voltage, job, and program - Various welding programs can be selected - Pulse mode - Separate 4-roller wire feeder EWM, Type DV cold wire hand with connecting hose package approx. 5 meters - Approx. 4 meter hose package - External EWM water cooling, Type Cool 71 U41 DKF - External high-voltage unit - Welding machine equipped with 1 mm welding wire Space required L x W x H: 1300 x 640 x 1830 mm Weight: 245 kg Very good condition

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: documentation/manual, foot remote control, Tilting device for containers, welding table, welding turntable, roller stand 3000 kg load capacity with foot-operated remote control Podpfx Aljzu I Ipewsrb Speed infinitely adjustable, 80 to 1600 mm/min. Diameter 40 mm to 1400 mm Roller diameter 200 mm L: 800 x W: 370 x H: 450 Model or color variations possible Note: Height adjustment / support stand dimensions can be customized for an additional charge. Example as shown in the image. Additional charge: €1200.

Condition: used, MIG/MAG pulsed gas shielded welding machine, EWM, type Phoenix 301 Progress Puls Force Arc Serial No. Art. No.: Year of manufacture: 2007 Power: 300 amps = 60% duty cycle 250 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 29 volts Mains connection: 400 volts, 50 Hz, 16 amps plug - Digital display for voltage and current - Pulse function - Various welding programs selectable - 2-cycle, 4-cycle and spot welding - Water-cooled - 4-meter hose package, NEW, with central connection Pedpfx Aljz Afhiewjrb - Welding gas pressure regulator, NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition - fully functional - ready for demonstration

Year of construction: 1980, condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1,000 kg -Rotational movement: electrically continuously adjustable 0-1 rpm Psdpfeyaniljx Alwsrb -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1750/1170/H1620 mm -Weight: 1392 kg

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Psdpfx Asg Icfpelworb Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 2014, condition: ready for operation (used), A welding turning device Jucat consisting of two parts with the workpiece in the middle is available. Design: 2-column system, max. load capacity: 6000kg, rotational torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Prodoyrg Hyopfx Alwjb

Condition: good (used), continuous welding machine, film welding machine Podpfx Alovyq Duswjrb -Manufacturer: Rische, continuous welding machine film welding machine Polystar -Type: Polystar 350/5 DSM-TE -Voltage: 220 V -Technical data: see photo type plate -Dimensions: 520/250/H5600 mm -Weight: 12.1 kg

Year of construction: 2009, condition: used, For sale is our welding system from AEF Hauzenberg. This is an electrode welding system. Inside the unit, there are three zones where welding processes can be carried out simultaneously. The system is equipped with a control cabinet featuring a PLC, allowing the process parameters of the welding operation to be set. We used Silfos (AG) brazing alloy. Included in the delivery is also a water chiller from Habor, model HWK-1000PTSB2. Pjdpfxjy Skq Rj Alwerb

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prodpfx Asy Ihbxolwsb Prior sale reserved.

Condition: like new (used), Year of construction: 2024, load capacity: 10,000 kg, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Prsdpfx Alow D Rhaowob Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Tank rotating device for welding pipes and tanks Manufacturer: PH Maschinenbau Type: PH-RBA 30000-SO AT01H424 Year of manufacture: 2002 Load capacity of the rotating device: 30 tons Rotational speed: 0 to 2 m/min Tank diameter: 500 - 7000 mm Roll spacing: 100 to 2500 mm Center distance between rolls: 500 to 2950 mm Roll diameter: 400 mm Roll width: 540 mm Motor power: 2 x 0.55 kW Power connection: 230 volts, 50 Hz - Infinitely variable speed adjustment via SEW frequency inverter - Cable remote control - Right and left rotation - Both roll pairs are driven - Rolls with 4 rubber tires each - Manual adjustment of the roll spacing via trapezoidal screw spindle - Rail-mounted chassis with drive, steel cast wheels with smooth roll surface Space requirement L x W x H: 3750 x 2100 x 1200 mm Weight: 3.2 t Podpszin A Aefx Alwerb Good condition

Condition: used, MIG/MAG pulsed gas shielded welding machine FRONIUS, Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Power: 330 amps = 50% duty cycle 300 amps = 60% duty cycle 210 amps = 100% duty cycle Adjustment range: stepless Open-circuit voltage: approx. 50 volts Open-circuit voltage: approx. 30 volts Mains connection: 400 volts, 50 Hz, 32 amps, plug - Digital display for voltage and current - Pulse function - Various welding programs can be selected Welding processes: MIG/MAG/TIG (program and manual operation) 2-cycle, 4-cycle, 4-cycle special and spot welding - Separate 4-roller wire feeder FRONIUS, Type VR 152, with connecting hose package approx. 1.5 meters - 4 meter hose package NEW, with central connection FRONIUS - External FRONIUS water cooling unit, Type FK 71 - Welding gas pressure regulator NEW - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H: 900 x 660 x 1550 mm Weight: approx. 160 kg Pjdpfx Alsyxy Tbjworb Good condition - fully functional - ready for demonstration The unit is also suitable for TIG and electrode welding. Additional equipment for TIG and electrode welding is not included in the scope of supply.

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Pjdpfowtq Dtex Alwjrb Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: used, Welding turntable ESS type DT 50 No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation Prodpfx Ajrwq Urolweb - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic Psdpfx Ajpy Uzyslwerb - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: like new (used), Year of construction: 2024, Special price, used for 1/2 year, as new, with warranty Self-centering complete set, dual drive, synchronous with hand remote control, digital display, and foot control Diameter from 300 mm to 3500 mm Drive roller diameter 300 mm Dimensions: length: 1900 mm x width: 470 mm x height: 390 mm Continuously adjustable speed 200 – 1200 mm/min. Motor AC 380 V Psdpfx Aewt A Nzolworb

Condition: used, Tank rotating device, roll rotating device, welding rotating device, boiler rotating device Manufacturer: GSD Tank rotating device for welding pipes and tanks Year of manufacture: 2012 Load capacity of the rotating device: 40 tons Rotation speed: 0 to 3.2 m/min Predpjzgx A Ijfx Alwjb Tank diameter: 500 - 7000 mm Roller spacing: 200 to 1750 mm Roller center distance: 600 to 2150 mm Roller diameter: 400 mm Roller width: 480 mm Motor power: 2 x 1.5 kW Mains connection: 400 volts, 50 Hz - Variable speed control via SEW frequency inverter - Cable remote control - Clockwise and counterclockwise rotation - Both roller pairs are driven - Rollers with 5 rubber tires each - Manual adjustment of the roller spacing via trapezoidal screw spindle - Railcar DEMAG, steel castors with smooth roller surface (without drive) Space requirement L x W x H: 4000 x 1850 x 1150 mm Own weight: 4.5 t Good condition

Condition: good (used), Welding rotary device, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary device, gearbox, spur gear gearbox, bevel gearbox -Manufacturer: Guso, welding rotary device, container rotary device on a solid base frame Prjdpfx Alozkfulowjb -Load capacity: kg -Control: with hand terminal, foot pedal and digital speed setting -Three-jaw chuck: Forkardt Ø 400 mm, three-jaw chuck bore Ø 140 mm -Speed: 0-1 1/3 rpm Right/Left rotation -Axles: 1 piece -tiltable: No -Height adjustment: Yes -Base frame: without adjustable feet -Transmission: switchable 2 stages -Manufacturer Sawa- Gearbox type CUSII260/720-S -Translation: 1:6375, 1:1530 -Input shaft: Ø 30 mm -Output shaft: Ø 170 mm -Transport dimensions: 2390/1110/H1520 mm -Weight: 2700 kg

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A -Water-cooled -Dimensions: 1160/500/H810 mm Podpfx Ajlpi S Nolwsrb -Weight: 303 kg

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition Prodpfxewa Uwds Alwob

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. Pjdpoy Efmgsfx Alworb I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 2,000 kg, Column lift and rotation device, 2000 kg load capacity, with adjustable height Sideros Syncrolift positioner Double column Radio handheld remote control (wireless) Year of manufacture: 2024 Load capacity: 2000 kg Minimum working height: 1000 mm Maximum working height: 1500 mm Speed: 1 rpm Vertical adjustment: 500 mm Clamping plate diameter: 700 mm Rotational power: 1.1 kW Lifting motor: 2 x 1.1 kW Prjdpfx Alouk Nigswob Various column lift and rotation devices available: 500 kg, 1000 kg, 2000 kg, 3000 kg, 5000 kg, 10000 kg, 20000 kg Request a quote