Used Wiemers Sr 30 for sale (24,704)

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) Lhsdpfx Aqjw D E Twjvjg - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock Ledpfov Rpnmex Aqvjhg - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Year of construction: 1992, condition: used, Plate heat exchanger for milk processing Ljdpfx Ash Eulgoqvjhg

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 15095.86 € 289.84 € 30 mm MK 3 300 mm 0 - 4000 U/min 3 kW M30x3,5 900 mm 610 mm 1980 mm 385 kg 0,10 / 0,16 / 0,25 mm/U 125 mm 150 - 700 mm 590 x 450 mm 125 mm Drilling capacity / normal drilling capacity 30/35 (in E335/ST60) Main switch Dispositif de taraudage Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill protection with electr. Fuse Lsdpfeynnczsx Aqvjhg Connection cable with CEE plug 3 years warranty for single shift operation Mechanical feed of the Z-axis incl. electromagnetic clutch for (3) feed rates Drilling cross with pushbutton (on/off) for feed rate In tapping mode: Right-left lifting via drill cross switch or optional foot switch OPTIONS: Drill package 5 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 Lsdpfx Ajrr Ehqeqvshg spare part number: 5 Dition: gebraucht

Condition: used, maximum load weight: 29,260 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2016, loading space length: 7,700 mm, loading space width: 2,350 mm, loading space height: 1,800 mm, Year of construction: 2016, Equipment: ABS, Air, lift, BPW disc, EBS, aluminum rims, fall supports, lean-to ladder, PVC half-shell mudguards, UFS foldable, trough made of HB 450 floor 5mm, side walls 3.2mm thick, attached rear wall (aluminum), slider, walkway with ladder, roof frame, PVC roll-up tarpaulin with central locking, WK, loading gauge Lhodswciluopfx Aqvsg

Condition: ready for operation (used), Year of construction: 2015, Three used compressors: 2x Servatechnik SR 300, year of manufacture 2006 No main switch installed, approx. 24,000 operating hours Lhjdpfsy R S Dvex Aqvjg 1x Worthing Creyssensac, year of manufacture 2015, no main switch installed, approx. 72,000 operating hours

Condition: new, The durable planer from the SR series is a machine thanks to which we can adjust the thickness workpiece from the bottom side, the maximum workpiece width is 330/430/530 mm. The high-performance 4 kW motor and the cutting block with four blades ensure high performance quality work and obtaining perfectly straight surfaces. Technical data: Planing width: 530 mm Knife shaft diameter: 120 mm Number of knives: 4 Knife shaft speed: 4700 rpm Ljdpfx Ajlqwwhsqvohg Tilting guide: 0-45° Total length of the table: 2700 mm Max thickness of the workpiece: 5 mm Extraction port diameter: 150 mm Motor power: 4 kW Engine speed: 2880 rpm NEW machine Overall dimensions: Length: 2760mm Width: 920mm Height: 1130mm

Condition: good (used), Safety relay, safety control unit, emergency stop switch Lhsdokia S Espfx Aqveg -Manufacturer: Moeller, safety relays -Type: ESR4-NV3-30 -Quantity: 1x relay available -Dimensions: 95/25/H115 mm -Weight: 0.2 kg

Condition: new, Year of construction: 2026, Delivery time: immediately ex works. Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Rapidly adjustable and ergonomic drilling depth stop - Infinitely variable speed control via rotary knob - Thermal overload protection - Spindle stop - Drill guard with electrical interlock - Connection cable with CEE plug - Mechanical feed for Z-axis - Including electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: right/left rotation TECHNICAL DATA Continuous/standard drilling capacity (mm): R3 - 30/35 (in E335/ST60) (200) Maximum thread cutting capacity: R3 = M30x3.5 Spindle taper MK III Drilling depth: 125 mm Throat: 300 mm Lhedpfxjx Hh Dwo Aqvog Column diameter: 125 mm Usable table surface (W x D): 590 x 450 mm Digital speed indicator Digital drilling depth indicator Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150–700 mm Spindle speeds, stepless: R3 (2-stage with intermediate shaft) 0–4,000 rpm Accessory coolant system (€605) - Separate tank - Capacity: max. 15 l - Pump output: max. 13.4 l/min Accessory drilling package 5 (€855) - Vice [felix] 2.0 150 - Taper shank MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3–16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: free to your door, including packaging NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT DEALER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! REQUEST YOUR OFFER TODAY!

Condition: new, Year of construction: 2024, Thread cutting device OLED display LED lighting Continuous/normal drilling performance (mm) - R1 27/32 mm - R2 25/30 mm Thread cutting performance max. - R1 M34x3 - R2 M20x2.5 Spindle MK III Drilling depth (mm) 125 Throw (mm) 300 Column diameter (mm) 125 Usable table area (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,140 mm Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm Ledpfx Aqott Af Revjhg R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 370 Optional drilling package 5 (€ 855.00 plus VAT) - Vice [felix] 2.0 150 - Taper mandrel MK III/B18 - Reducing sleeve MK III/MK I - Reducing sleeve MK III/MK II - Keyless drill chuck B18 3-16 mm (accuracy 0.17 mm) Free delivery in Germany including packaging! NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), CTS Type: TSR-30/1000 Water-cooled Ledpfjrivfcjx Aqvjhg The type designation of the CTS enclosure series is made up as follows: z. e.g. type TSR -30/1000 1) T means: Temperature 2) S means: stress screening 3) R means: external conditioning 4) -30 means: lower temperature -30 °C 5) 1000 means: 1000 liter test chamber volume Technical performance data: A) TSR-30/1000 basic device without hose connections, i.e. when used as a stand-alone temperature test chamber Temperature tests: Temperature range -40°C to +180°C Final temperature -45°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 6.0 K/min Cooling 5.0 K/min Heat radiation approx. 5000 W at +20°C approx. 4200 W at ± 0°C approx. 3000 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Air volume flow approx.2000m³/h B) TSR-30/1000 basic unit with hose connections, for connection to an external test room provided by the customer Temperature tests: Temperature range -30°C to +170°C Temperature deviation ≤ ±0.1 to 0.5 K in time Average rate of temperature change, measured with short-circuited circuit Heating 4.0 K/min Cooling 4.0 K/min in the range from +150°C to -10°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment, measured with short-circuited circuit Attention: The external test chamber provided by the customer must be absolutely tight and appropriately insulated, any feed-throughs must be optimally sealed on site. Dimensions: Test volume 1000 liters Air circulation connection Ø 200 mm Test chamber dimensions Height 900 mm Width 1000 mm Depth 1100 mm External dimensions Height 1950 mm Width 1270 mm Depth 2245 mm Technical design: Refrigeration unit: water-cooled, low-noise, fully hermetic Infinitely variable capacity adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: Fully opening door, door hinge on the left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 mm Max. load per shelf 35 kg Total load with max. shelf load 100 kg Test area lighting: Halogen lamp 20 W, 12 V Control: - 32 bit controller - LCD control panel Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 13.3 kW Protection class IP 22 Sound pressure level < 60 dB(A) Weight approx. 850 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Sepro robot Type: SR 4030 S3 Year: 08-2006 Lhsdonxkdnjpfx Aqvsg

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 4.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1400kg. Lhedpfx Aqjv Nlmvjvsg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, Premade pouches packaging/filling and closing machine, rotary operation with 6 working positions. Suitable for flat pouches and doypack style pouches. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW(200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 3.5kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1200kg. Lsdpfxev Nlmio Aqvjhg That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2018, condition: used, heat-shrink tube MA47 30/8 MA47  75/22 SRH2 56-16 Lhodpfxevimt Ds Aqvjg black 1   - 10 pieces per packaging unit 9 cartons on stock - price per packaging unit - weight per packaging unit approx. 3 kg

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, year of manufacture 2007 * Unladen weight: 9,500 kg -----Internal vehicle number: 10757----Errors and intermediate sale reserved. WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us easily via WhatsApp. Lhedpfswbyphjx Aqvog Whatsapp Whatsapp

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Maximum pressure 8 bar Maximum load 8 kg Robot weight 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since multiple copies of this item are available and the robots use different tools, Ljdpehbhyuefx Aqvohg these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are plentiful. A total of 24,000 m² of production space is being demolished and sold. Please also check out our other offers. After purchase, the amount is due within 7 business days. You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, axle configuration: 3 axles, first registration: 07/2000, color: other, Year of construction: 2000, Empty weight: 3.940 kg Axle 1: left 6 mm right 6 mm Axle 2: left 5 mm right 5 mm Lodpfx Ajwycwreqvshg Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: new, Year of construction: 2026, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. Lhodpjq H Shcjfx Aqveg You can leave us a message if you need a different model or a different type of crusher.

Condition: good (used), Bandall BA 24/15-30 Banding Machine One of the most recognizable banding machines in the world, a market leader. Manufactured by Bandall, the Netherlands. Machine in very good condition, recently serviced. Year of manufacture: 2016 The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone frame with wheels for transport. Ljdjy Sfayepfx Aqvohg Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Controlled via an LCD panel. Technical specifications: Tape width: 30 mm Performance: 36 cycles/min Machine opening dimensions: 320 x 160 mm A roll of film is included.

Condition: used, mileage: 65,680 km, power: 96 kW (130.52 HP), first registration: 04/2018, fuel type: diesel, overall weight: 3,500 kg, color: red, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0551. GW222H01591 ---- SPECIAL EQUIPMENT - Passenger-side airbag, switchable - Air conditioning FURTHER EQUIPMENT - ABS - Storage compartments - Driver's airbag - Exterior mirrors including integrated side indicators - Mechanical brake assist - Roof light in cargo area - Double roof light in cab - Tachometer - ESP, ASR - Front electric windows - Gearbox: 6-speed manual - Rear door (double-wing), closed - Paintwork: Solid colour - Reach-adjustable steering wheel - Manual headlight levelling - Multifunction display - Particulate filter: Diesel particulate filter - Upholstery: Fabric - Radio pre-wiring (cables and antenna) - Black side protection strips - Right-hand side sliding door, without window - Power steering - Double passenger seat bench - Height-adjustable driver's seat - 12V socket in cargo area - 12V socket in centre console - Partition wall, closed - 8 lashing eyes in cargo area - Service interval indicator - Immobiliser with transponder - Heat-insulating glazing - Central locking with remote control ...and much more. ---- Vehicle is in unprepared/original condition! Nationwide delivery available at extra cost. Lhodsxcc Uyepfx Aqvsg Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing / Leasing possible with no down payment! Any questions? We are happy to advise you!

Condition: good (used), Manufacturer: Rhein-Nadel Automatisation GmbH Type: SRC-N 630-1 R Vibration frequency: 50 Hz/3000 min -1 Lhodpfjgth U Isx Aqveg Electrical power: 220 V Drum diameter: 900mm Adjustable vibration

Condition: good (used), Com J240/30 Banding Machine on a Base One of the most recognizable banding machine manufacturers on the market, manufactured in Japan. The machine operates in manual or automatic mode. Production version, for heavy loads. The machine is mounted on a standalone structure with wheels for transport. Operates on jumbo rolls. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for packaging business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Performance: 26 cycles/min Dimensions of the banded product: 240 x 150 mm Made in Japan. Weight: 70 kg. Lhodpfoy Nzltox Aqvjg

Condition: ready for operation (used), Year of construction: 2019, pressing force: 153 t, travel distance X-axis: 800 mm, This 6-axis HACO SRM30150 was manufactured in 2019. It features an 800 mm travel for the backgauge X-axis and includes manual quick clamping for upper tools. The machine is equipped with two support arms on linear guides and offers options for speed control and premium crowning. If you are looking to get high-quality bending capabilities, consider the HACO SRM30150 press brake we have for sale. Contact us for further details. - Control System: EasyBend-2D Graphical Control (103TFT)- Power Circuit: Star-delta connection- Backgauge: X-axis- Tool Clamping (Intermediate): Intermediate clamping for system tools- Upper Tool Clamping: Manual quick clamping for upper tools- Table Type: Table for system tools- Crowning: Manual crowning- Support Arms: 2 support arms, 750 mm on linear guide- Option - Speed Control: CE-Slow (Max. speed 10 mm/sec)- Option - Backgauge: X-R 800 mm travel path- Option - Premium Control: FastBend 2D Multi Touch Control with 18-inch screen- Option - Premium Crowning: Additional price for CNC Crowning Table with Single-V opening- Included Tools - Upper Tool 1: PS.134.30.R08 L=835 mm (4x)- Included Tools - Upper Tool 2: PS.134.30.R08 L=805 mm Sectioned/Segmented (1x)- Included Tools - Die 1: TMR100.40.30 L=500 mm (6x)- Included Tools - Die 2: Rolleri M.460.R L=835 mm (4x)- Included Tools - Die 3: M.460 R L=805 mm Sectioned/Segmented (1x)- Hydraulic Fluid Status: WITHOUT OIL FILLING- Machine Color: Light gray and dark gray, no cyan blue Ljdpfx Aqjy Tk S Devshg Technical Specification Bending Length 3000 mm