Used Wmw Erfurt Pe2-H-315 Es for sale (62,132)

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Press weight: 71.3 tons Iodpfxeyir Uks Aizjaw

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Iaodpfx Aewx R Rdeizjw Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material feeder, a straightening machine and a roll feeder.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Iajdpozh Dtzefx Aizsw The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: ready for operation (used), Pressing force: 1600kN, throat depth: 450mm, installation height: 560mm, ram stroke: 8-160mm, controls: SCHMERSAL SEPG 05.3.2.0.22/ 95, weight: 16.2t, including documentation. Iedpshz Ua Sefx Aizsaw

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Ijdevbcxtopfx Aizeaw Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Iedpfjzdanzsx Aizoaw Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Iodpfxeykl Ias Aizjaw Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Chuck size: Ø 250 mm -Short taper: 6 Iaodsd Irazjpfx Aizjw -Throughout: Ø 80 mm -Weight: 25.9 kg

Condition: used, Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg Iedpfxsdrwlxs Aizeaw

Condition: used, Bezel, stick, lynette Ijdeb A Td Rjpfx Aizoaw -Max. Passage: Ø 65 mm -Tip height: 83 mm -Edition: gray cast iron -technical drawing with the photos -Dimensions: 250/280/H65 mm -Weight: 6 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 200 mm Iasdpjd Ew Txjfx Aizsw -Weight: 18 kg

Condition: used, Bezel, steady rest, lynette -steady rest: from lathe WMW DLZ 800 Iodpfogul Sxex Aizeaw -Max. Passage: Ø 260 mm -Tip height: 495 mm -Technical drawing: in the photos -Dimensions: 670/130 / H785 mm -Weight: 98 kg

Condition: used, Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos Ijdpsdl U Naefx Aizjaw -Dimensions: 610/120/H650 mm -Weight: 59 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 Iasdpfx Asd Ira Deizow -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg

Condition: used, Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills Iaedodl U Nbjpfx Aizew -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck -Handover: in current condition as viewed -Short cone: has been shortened -Chuck size: Ø 200 mm -Through hole: Ø 54 mm -Hole: cone Ø 104.5 mm -as per pictures, without additional accessories Iaedpfx Ajvbbmcjizow -Weight 14.4 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Isdsd Ew T Aspfx Aizoaw -Mouth size: Ø 250 mm -Recess inlet: Ø 210 mm -Through hole: Ø 80 mm -Weight: 18 kg

Condition: good (used), Centrifugal quick-release chuck, centrifugal chuck, three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 12-30 mm Iasdpfxeb A Rdts Aizow -Cone mounting: Ø 82 mm -Bolt circle: Ø 105 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece

Condition: good (used), Bezel, steady rest, lynette -max. passage: Ø 210 mm -Centre height: 390 mm Iedpfxod S Iyxo Aizsaw -technical drawing: in the photos -Dimensions: 600/125/H625 mm -Weight: 53.5 kg

Condition: good (used), Centrifugal quick-release chuck, centrifugal three-jaw chuck -Outer diameter: 155 mm -Clamping range: Ø 25-45 mm -Cone mount: Ø 62 mm -Bolt circle: Ø 82 mm -Quantity: 2x food available Price: per piece -Weight: 6 kg/piece Iajdpfxeb A Rdxe Aizsw

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -DH200x3-III -TGL: 30-2332 -Mouth size: Ø 200 mm -Recess: Ø 155 mm -Bolt circle: Ø 174 mm -Through hole: Ø 57 mm Iasdeb A Slhspfx Aizew -Weight: 12 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck Isded Im S Hjpfx Aizoaw -Mouth size: Ø 200 mm -threaded mounting -Through hole: Ø 53 mm -Weight: 19.7 kg

Condition: good (used), three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck Iajdpjdq Tt Hjfx Aizsw -Chuck size: Ø 250 mm -Cone: Short cone 8 Ø 139 mm -Bolt circle: Ø 170 mm -Through hole: Ø 80 mm -Weight: 24 kg

Condition: good (used), Three-jaw chuck, 3-jaw chuck Isdpfsdtap Rex Aizeaw -Type: DHB 200x3x5 TGL 30 2332 -Mouth size: Ø 200 mm -Passage: Ø 54 mm -max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Baking: soft Iaedpfx Aijb A Rdzezow -Mouth size: Ø 200 mm -Weight: 22 kg