Used Wmw Erfurt Spotting Press for sale (14,559)

Condition: used, Year of construction: 1985, Offer 25995 Nlodpfx Aewp Eguonkjd Technical Data: - Pressing force 1600 KN / 160 t - Pressure regulation 0 - 160 t - Stroke length approx. 0 - 600 mm - Max. installation depth with straightening bar 1050 mm - Max. installation depth without straightening bar 1400 mm - Stroke speed approx. 0 - 0.6 m/min - Tool height approx. 400 mm - Drive 380 V / 11 kW - Space requirement approx. B 3600 x H 1400 x T 1800 mm - Weight approx. 6500 kg - Accessories - height-adjustable side support rollers - Straightening tool for straightening long material - Straightening bar 1300 x 400 mm with over - Threaded spindle, laterally adjustable supports

Condition: like new (used), Year of construction: 1985, machine/vehicle number: 38754, functionality: limited functionality, operating hours: 200 h, pressing force: 250 t, This plate bending machine was installed new in 1989 and was used for 200 Hrs and never used ever since. The mechanical parts are fully functional and are in perfect condition but the electrical board needs fixing. Force: 250 mp (metric tons) Working Surface Length: 5600 mm Working Surface Width: 400 mm Working Surface Height: 100 mm Weight: Approximately 37,000 kg Press Sizes (LxHxW): 5700 x 3150 x 5200 mm Nlsdpfeykl Iaox Ankod

Condition: like new (used), Year of construction: 1989, Sheet stamping press ERFURT PE2-H-315 ES Manufacturer: ERFURT Made in: Germany Specification: Max slide-block force over distance to bottom dead center 12.5 mm: 3150 kN Slide-block force over distance to bottom dead center 160 mm: 1100 kN Idle stroke amount: 25 mm Slide-block stroke: 500 mm Min closed die height: 680 mm Max closed die height: 1000 mm Moving table dimensions: 2800x1500 mm Die cushion: -Max stroke: 160 mm -Adjustable stroke: 160 mm -Max double-acting force: 630 kN -Max ejector force: 630 kN Main motor power: 45 kW Height above floor level: 7100 mm Nedpfxoyir Uke Ankold Press weight: 71.3 tons

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Nlsdpfx Aevbcxtonkod Movie available

Condition: ready for operation (used), Hydraulic press PYE 160 S - 2 units available Specifications: Capacity: 160 tons Working pressure: 16 MPa Upward speed: 125 mm/sec Downward speed: 200 mm/sec Nlodpfx Aezdanzjnkjd Slide stroke: 500 mm Daylight: 360 mm Max. distance between table and slide: 800 mm Ejector capacity on the table: 63 tons Max. extraction depth: 200 mm Voltage: 380 V Total required power: 17 kW Nominal current: 35 A Total weight: 7 tons Hydraulic press ERFURT PYE 100 S - 2 units available Capacity: 100 tons Table dimensions: 750x560 mm Ram dimensions: 530x400 mm Table height above floor: 710 mm Max. shut height: 800 mm Throat: 360 mm Stroke: 500 mm Downward speed: 320 mm/sec Upward speed: 200 mm/sec Connection power: 17 kW Press weight: 5 tons

Condition: used, Year of construction: 1997, pressure 0630 t stroke 300 mm no. of strokes 10- 75 Hub/min table-size 3600 x 2200 mm passage width 4000 mm ram surface 3600 x 2200 mm column travel -side 2000 mm ram adjustment 150 mm shut height (stroke down, adjustm. up) 1000 mm voltage 400 V height over floor 7600 mm Depth of Press under floor 2500 mm total power requirement 160 kW weight of the machine ca. 225 t dimensions of the machine ca. 750 m² Complete feeding line comes with the machine. It works on a material width of 300- 1600 mm and a thickness of 0,5- 3 mm. Machine has two working tables which move in and out to the front. To the side machine has a stacking device with two pallets. It also has two stacking pallets to the backside. Machine has a Coil charging device of 3 Coils with 25 t, a decoiler Schnutz, a material Nlsdpfjwx R Rdsx Ankod feeder, a straightening machine and a roll feeder.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Njdjzh Dtzopfx Ankeld Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, pressing force: 160 t, overall weight: 10,500 kg, punching force: 160 t, height adjustment type: electric, Eccentric Press ERFURT PEE(II) 160 for Sale For sale is an Erfurt PEE(II) 160 eccentric press in good condition, ready for immediate use. This is a robust and reliable industrial machine, ideally suited for various pressing, forming, and sheet metal processing tasks. Erfurt machines are renowned for their durable construction, solid design, and dependable performance. Therefore, this model is an excellent choice for metalworking companies, workshops, manufacturing businesses, or fabrication shops seeking a proven and high-performance press. Technical specifications: - Type: Erfurt PEE(II) 160 - Design: Eccentric press Nlsdpfx Ajyvzzzjnked - Condition: Good - Operational status: Ready for immediate use This machine impresses with its heavy-duty build and reliable functionality in industrial applications. It is perfectly suited for daily use in production and can be put into operation immediately after purchase. If interested, further information, technical details, and additional photos can be provided upon request.

Condition: used, Year of construction: 1980, Technical details: Nedpeu N A Uujfx Anksld pressure: 400 t stroke: 40 - 140 mm strokes / minute continous: 32 throat: 400 mm dayligth: min/max: 450/590 mm ram adjustment: 125 mm table-size: 1250x750 mm height over floor: 1130 mm total power requirement: ca. 31,5 kW weight of the machine ca.: 23,0 t machine dimensions LxWxH: 3,7 x 1,7 x 3,9 m dimensions electric cabinet LxWxH: 1,0 x 0,7 x 2,1 m further details: - clamping plate : L x W x H : 1260 x 760 x 100mm - with draw cushion device force 250kN, travel approx. 83mm - control via panel i.D. *

Condition: used, Year of construction: 1980, Technical details: Pressure: 160 t stroke: 20-160 mm throat: 400 mm ram adjustment: 120 mm no. of strokes: 71 Hub/min daylight dimension : table/slide up: 720 (bei Hub 160mm) mm daylight dimension : table/slide low: 560 (bei Hub 160mm) mm ram surface area: 900 x 660 mm distance between columns: 500 x 450 mm table surface area: LxBxØ: 1200 x 750 x 100 mm total power requirement: ca. 23.0 kW weight of the machine ca.: ca. 15,0 t dimension machine xH: 2,7 x 1,5 x 3,45 m dimensions electric cabinet LxWxH: 2,0 x 0,65 x 2,15 m Operation via control panel/operator stand/foot control and hand-held control unit The press can be offered with two options. 1st option: Sold as is, not connected, not complete, not functional. 2nd option: The baler will be refurbished, all parts will be exchanged, replaced and puddled. The press will be set up again. Nledpfxsu N A U Io Ankod For inquiries about this press, please select your offer option! in progress. *

Condition: used, Technical details: Nljdpfx Asu Nurfjnkjd diameter of piston: Ø 160 mm weight: 200 kg dimensions: 0,6 x Ø 0,3 m draw cushion for a WMW Erfurt Press type PYE 160 blankholder force 50Mp ejector force 4 Mp stroke up to 160mm flange diameter 280mm piston diameter 160mm piston central drill hole M 16, fixing holes M 24, diameter 118mm hydraulic connection 2x 1 inch *

Condition: used, Technical details: intake diameter: 310 mm weight: 216 kg dimensions L x W x H: 0,5x0,2x0,9 m Nedpfxju Nurxe Ankeld conrods for mechanic press PEE 250 trapezoid thread dia. 146x14mm *

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm Nledjxuv Htopfx Anksd ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: used, rated capacity 23 kW rated current 43 A voltage 400 V For sale is an electrical control cabinet, which originally belonged to the a single-column eccentric press, make Erfurt, type PEE III/160 Njdpfx Aeucgnionkold

Condition: repair required (used), Year of construction: 1998, Max. tool size: 1,600 x 1,300 x 1,700 mm Max. table load: 17 tons Clamping force: 1500 kN Opening force: 750 kN Nsdszkigropfx Ankold Drive power: 25 kW Machine weight: approx. 30 tons

Condition: good (used), Year of construction: 1981, operating hours: 376 h, functionality: fully functional, machine/vehicle number: 01031, total height: 3,200 mm, total width: 1,900 mm, total length: 2,500 mm, table width: 570 mm, table length: 670 mm, overall weight: 10,000 kg, clamping force: 400 kN, input frequency: 50 Hz, input current: 25 A, power: 7.5 kW (10.20 HP), REIS TUS 600 K Coating Press - Operating voltage: 380/260 V Attention: The item must be picked up between September 8 and September 10, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach - loaded onto a truck. Nodpfezlfb Ijx Anksld

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t Njdpfx Ajt Hxczsnkjld dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2010, Technical data: Nlsdpfx Aezlbzkjnkod Pressing force: 30 tons Distance between columns: 1090 mm Installation height: 920 mm Table dimensions: 900 x 850 mm Ram stroke: 320 mm Working speed: 6 mm/min CE marking Dimensions (width x depth x height): approx. 2500 x 2200 x 2550 mm Weight: approx. 4 tons Condition: very good condition, little used The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Pressing force: 40 tons Table surface area: 590 x 1000 mm Ram surface area: 590 x 1000 mm Nlsdpfezkrmnsx Ankjd Stroke: 900 mm Table is extendable, ram plate is swiveling.

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Nljdjxd Tiqjpfx Ankjd Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, Double-column hydraulic press, SMG Type HBP 200 - 2000 / 2000 Nledpfxjdzp Tcj Ankod Manufacturer's No. 7.4117, Year of manufacture 1986 - Refurbished 2000 Clamping force 200 tons Column width at the front 2050 mm Column opening on the side 2030 mm Table surface 2800 x 2000 mm Ram surface 2000 x 2000 mm Ram stroke 700 mm Installation height max. 1850 mm Table height above floor 750 mm Ram retraction force 33 tons Rapid traverse speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety clearance 230 mm Main motor power 75 kW Control pump motor power 11 kW Power supply 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots on the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking in the top dead center position - Linear encoder system with glass scale - Electrical control system renewed in 2000 with SIEMENS PLC S7 - Adjacent control cabinet - 2-hand control panel adjacent - Floor-level installation - Central lubrication - Operating manual with wiring diagrams Space required for the press in upright position L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space required for horizontal transport L x W x H 5900 x 3250 x 2950 mm Weight 38 tons The machine was used as a production press at Volkswagen until 2000. From 2000, the machine was used as a tool try-out press in a toolmaking company. Good condition.

Condition: ready for operation (used), Year of construction: 1985, 1 used spotting press Manufacturer: REIS Model: TUS 160 OK 200 Year of manufacture: 1985 Technical details: Press force: 200 t Table length: 2200 mm Nlsdpoyb Stqsfx Anked Table width: 1550 mm Installation height: 2200 !! mm Ram return force: 6,000 kg Table load capacity: 10,000 kp Total power requirement: ? approx. 25–30 kW Machine weight: approx. 30 t Space requirements: approx. 4 × 7 × 7 m Shipping dimensions: approx. 13.4 × 3 × 3 m

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Nljdpfx Aneufufbsked Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: good (used), Hydraulic press Nlsdpsulwzmofx Ankod TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2002, Manufacturer: Millutensil Type: MIL 203 Control: Siemens SIMATIC OP7 Year of manufacture: 2002 Pressure 0 - 250 Bar T Size T-22 Opening force 35 Ton Closing force 150 Ton Distance between columns 2130 mm Table height above floor 770 mm Upper table rotation 180 degrees Specifications Metric US Standard Capacity 30000 Nlsdpfx Anewpkv Iskjd Distance between the columns 2130 mm Table length 2000 mm Table width 1500 mm Table height 1500 mm Run-in speed 3900 - 4800 mm/min. Working speed 480 mm/min. Return speed 2100 - 3000 mm/min. Dimensions (approximate) Length 6150 mm Width 3500 mm Height 4800 mm Weight 28000 kg Please note: The information on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual conditions. We recommend that you verify all important details.