Used Wmw Gotha Ubr 20 X1600 for sale (29,268)

Condition: used, Year of construction: 1989, Technical details: Ijdpfsyvfy Tjx Anksti plate width: 1600 mm plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Iedpszly Nmjfx Anksti Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: used, Technical details: Pressure: 160 t slide stroke: 32...140 mm no. of strokes: 50 Hub/min throat: 400 mm dayligth: 400 mm adjustment of ram slide: 100 mm table-size: 1000x750 o. Aufspannplatten) mm ram surface area: 850x630 mm tool shank hole: 400x360 mm total power requirement: 15,5 kW weight of the machine ca.: ca. 10,5 t dimension L-W-H: E-Schrank 1,06x0,6x2,0 mm dimensions L x W x H: L:2,9 x B:1,25 x H:3,3 m - single and /or continuous stroke possible - 80A; Air pressure 6kp/cm²; Oil filling approx.30 Liter - 2 clamping plates (1200x760x90mm and 1200x760x70mm faucet hole dia=300mm) - foot control or manual via hand possible Itodpfx Anju N Dfhskoi - last check record was 2006 can be demonstrated under power! i.D. *

Condition: used, Year of construction: 1979, Technical details: Itjdpfx Aou Nfinjnkoi pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm Iedpfou Nfklox Anksti surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Technical details: sheet width: 1080 mm plate thickness: 1,25 mm distance between columns: 1200 mm dimensions LxWxH: 1,9 x 0,6 x 0,9 m weitere Merkmale: 2x Biegewalzen: Itedou Icdyopfx Ankei -Ø 63 x 1080mm -die Oberwalze ist ausschwenkbar -die Unterwalze hat einen Verstellweg von 12mm -Antrieb manuell über Handkurbel 1x Laufwalze: -Ø 63 x 1080mm -mitlaufend -Verstellweg ca. 5mm *

Condition: used, Technical details: pressure: 250 t stroke: Dauerlauf-Leerlauf 40 mm slide stroke: verst./adjust. 36 - 126 mm adjustability of Ram: 110 mm clamping surface ram: 630 x 500 (lxb) mm clamping surface area: 1000 x 750 x 100 mm distance table/ram: 400- 526 mm passage opening in table: 400 x 360 mm operating pressure: 0,6 MPa MPa ejector path: 63 mm throat: 400 mm total power requirement: ca. 20,0 kW dimensions electric cabinet LxWxH: 1,2x0,65x2,1 m dimension machine xH: 2,9x1,2x3,4 m - two hand control - operation panel accessory: - foot plate 2200x1500x40mm Iodpfxou N Ddws Anketi *

Condition: used, Technical details: grinding length: 300 mm grinding spindle - swivable: 350 ° grinding head adjustable: senkrecht: 250 mm adjustment of spindle-head: quer: 230 mm grinding head adjustable: neigbar +/-15° ° grinding diameter: Ø 250 mm spindle revolutions per minute : 2200 - 3500 - 5200 U/min work table:: B:120 x L: 950 mm Itsdpfx Anju Ng Npjksi table movement: Obertisch schräg: recht/links 45° mm table movement: größter Tischweg: 500 manuell mm surface of magnetic-table: 305 x 130 x 100 mm dimensions of grinding wheel: Topfscheibe 125 x 20 Ø 32mm mm total power requirement: 1,8 kW weight of the machine ca.: 1,0 t dimension machine xH: 1,6 x 1,3 x 1,7 m dimensions of hydaulic: 600 x 550 x 870 mm Accessories: Universal clamping head cone MK5 Drill grinding holder Ø 10mm *

Condition: used, Year of construction: 1971, Technical details: bore capacity in steel (diameter): 16 mm throat: 250 mm bore stroke: 125 mm spindle taper MT: MK 2 spindle speed:: 350 - 2000 / 8step U/min table clamping surface:: 280 x 355 mm table rotating: ja ° Iedpfeu Idhmox Ankoti drill table adjustment: 520 vertical mm distance table - lower edge spindle: max. 600 mm column diameter: 110 mm total power requirement: 1,1 kW weight of the machine ca.: 272 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: -Drill chuck 13 mm -twist drill 10 mm with 45° countersunk cut -machine vice *

Condition: good (used), sheet width: 1070 mm plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m - upper roll can be swing out Itodpfx Ansg Rypmjkoi - operation via hand wheel

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 Itedpfozly Rqox Ankei diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW

Condition: good (used), Clamping cylinders, hydraulic clamping cylinders, hydraulic clamps, pneumatic clamps, air cylinders, clamping cylinders for power chucks, hydraulic cylinders Itedowzillopfx Ankji -Manufacturer: WMW, clamping cylinder stroke 20 mm -Type: 25 TGL 30-7311 -Shaft Ø 14 mm -Number: 16x clamping cylinders available -Price: per piece -Dimensions: Ø 35 x 127 mm -Weight: 0.6 kg/pc.

Condition: good (used), Collet chuck sleeves, collet chuck, tool holder, tool holder, milling holder, milling tool, adapter sleeves -Manufacturer: WMW, adapter sleeves 10 pieces, with plastic box -Sizes: Ø 4-20 mm with wrench, see photos -Sale: only for sale as a whole -Dimension box: 260/330/H80 mm -Weight: 2.3 kg Isdpegl Rxxjfx Ankjti

Condition: good (used), Year of construction: 1980, 13 rolls, diameter 140 mm plate width: max. 2.000 mm plate thickness: 4 - 10 mm Iedodnzr Uopfx Ankoti

Condition: used, Technical details: width: 500 mm depth: 260 mm height: 795 mm weight of the machine ca.: 320 pro Stück kg 2 pieces available (price per piece) Isdpfx Aeu S H Nlsnkjti without T-slots Foot clamping slotted hole Ø 39 x 130 mm *

Condition: used, Year of construction: 1980, number of straightening rollers: 16, working width: 1,250 mm, sheet thickness (max.): 12 mm, overall weight: 24,825 kg, Manufactured by BLEMA GOTHA (Germany) Max sheet thickness, mm 12,5 Max sheet width, mm 1250 Number of straightening rollers: 16 Straightening speed, m/min 16 Motor capacity, kW 54 Itsdpfx Aozap Rwjnksi Machine weight, kg 24825 Sheet leveling machine BLEMA GOTHA UBR 12,5 x 1250 / 1-16 The WMW UBR 12.5 x 1250/1-16 is an industrial multi-roller sheet straightening machine. Machine is complete and could be prepared for immediate shipment.

Year of construction: 1985, condition: good (used), 21 rolls, diameter 60 mm Iedpfx Aogq Dz Usnksti plate width: max. 2.000 mm plate thickness: 0,8 - 3,15 mm

Year of construction: 1984, condition: good (used), 21 rolls, Ø 60 mm Isdpfsrrl Uex Anksti strip width: max. 1.250 mm strip thickness: 0,6 - 4 mm

Condition: used, machine/vehicle number: WSK00000001246641, axle configuration: 3 axles, first registration: 08/2009, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2009, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes Iodpjyhb H Tjfx Anketi = More information = Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: good (used), Year of construction: 1972, Slideway grinding machine WMW SFBZ 2200/6000 Manufactured by WMW Germany in 1972 Main technical data: Table size: 2240x6000 mm Max. grinding width: 2200 mm Ijdpfow U A Rmsx Ankjti Max. grinding length: 6000 mm Max. grinding height: 2000 mm Max. workpiece weight: 15000 kg Machine weight: 130 tons The machine underwent a general overhaul in 2022. The feed boxes with electromagnetic couplings were replaced with motors and gearboxes for both heads. The bearings for the universal grinding head were also replaced. For more information, please contact us.

Condition: used, Centerless grinders SASL 125 1A, 200x300, 125x250, KCH 63 Ijdpfx Anscup D Nsketi

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 3500 mm weight approx. 22 tons Iedov Hx R Nspfx Ankoti

Condition: used, Three-jaw chuck, three-jaw lathe chuck Itedpfx Ansd Ew Txekoi -Chuck size: Ø 200 mm -Weight: 18 kg

Condition: used, Machine vice, vice, drill press vice -Jaw width: 155 mm Ijdpfxoc Ih Tij Ankoti -Back height: 80 mm Clamping depth: max. 200 mm -Dimensions: mm -Weight: 35 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck, 3 jaw chuck -Fucking size: Ø 200 m -Admission thread: M40 Itjdpfx Asd Ira Denkoi -Pitch: 1.5 mm -Rezess: Ø 180 mm -Weight: 22.5 kg