Used Zanrosso Engine Reconditioning Machine for sale (81,126)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 755/B, type of input current: three-phase, total width: 1,020 mm, total length: 1,450 mm, total height: 2,050 mm, input current: 5 A, AC 710 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design This is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm Nsdpfx Asz Rw N Heirolh • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways The machine has been thoroughly cleaned, checked and adjusted;ready to work.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8018, type of input current: three-phase, total width: 1,100 mm, total length: 1,460 mm, total height: 2,050 mm, input current: 8 A, AC 400 industrial cylinder boring and surfacing machine Production era: 1970s–1980s industrial design It is a high-precision engine block cylinder boring and surfacing machine, developed primarily for the reconditioning and oversize boring of internal combustion engine cylinders. The machine belongs to Berco's classic industrial series of engine rebuilding equipment, featuring a massive cast-iron frame and a high-rigidity spindle system. The equipment is suitable for the precise boring of engine blocks, cylinder liners, and industrial cylinders. The stable T-slotted table and long stroke length allow for the machining of large engine blocks. The machine features a mechanical, multi-speed spindle drive and a precision feed system, ensuring uniform bore quality. Key technical specifications: • Minimum boring diameter: approx. 31 mm • Maximum boring diameter: approx. 180 mm • Spindle speed range: approx. 155 – 873 rpm (multi-stage) • Feed rates: approx. 0.04 – 0.076 – 0.128 mm/rev • Main motor power: approx. 1 HP • Table longitudinal travel: approx. 1000 mm • Table cross travel: approx. 100 mm Njdez Rwkqopfx Airelh • Effective table size: approx. 1100 × 400 mm • Head vertical travel: approx. 700 mm • Maximum boring depth: approx. 480 mm • Maximum working height on the table: approx. 820 mm • Distance from spindle centerline to column: approx. 305 mm • Machine weight: approx. 1500 kg • Stable cast-iron machine frame and precision guideways This is a good working machine. If you would like, you can try it at our workshop.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 0450510, type of input current: three-phase, total width: 1,280 mm, total length: 2,800 mm, total height: 2,290 mm, input current: 18 A, Manufacturer: ZANROSSO Officine Meccaniche S.p.A. (Italy) Type: ESA 12 hydraulic surface grinding machine Production era: 1970s–1980s industrial design The Zanrosso ESA 12 is a high-precision industrial surface grinding machine developed for the surface grinding of large-area components. The equipment features a robust cast-iron structure, hydraulic table movement, and a high-performance grinding spindle. The machine is suitable for the surface grinding of tool steel, machine parts, castings, and precision industrial components. The long hydraulic table travel allows for the machining of large workpieces, while the automatic feed ensures uniform surface quality. The large-diameter grinding wheel and stable column design enable high-precision and vibration-free machining. The machine is equipped with an industrial-grade hydraulic system and multiple electric drives. Key technical specifications: • Worktable size: approx. 1500 × 320 mm • Automatic table stroke: approx. 1800 mm • Maximum grinding length: approx. 1600 mm • Table hydraulic feed rate: approx. 0 – 6000 mm/min • Maximum distance between table and grinding spindle: approx. 940 mm • Grinding head maximum vertical travel: approx. 400 mm • Grinding wheel diameter: approx. 350 mm • Distance from grinding spindle centerline to column: approx. 380 mm • Automatic feed: approx. 0.005 – 0.04 mm/stroke • Grinding head vertical rapid travel: approx. 700 mm/min Electric drives: • Grinding spindle motor: approx. 10 HP – 1400 rpm • Grinding spindle secondary speed: approx. 160 / 320 rpm • Vertical rapid travel motor: approx. 0.75 HP • Hydraulic motor: approx. 1 HP • Coolant pump motor: approx. 0.13 HP Dimensions and weight: • Length: approx. 5160 mm Njdpfxoz Rxfce Airjlh • Width: approx. 1280 mm • Height: approx. 2290 mm • Weight: approx. 2000 kg

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, type of input current: three-phase, total width: 1,050 mm, total length: 3,800 mm, total height: 1,750 mm, input current: 5 A, Schou L-2500 Heavy duty universal line boring machine Manufacturer: Schou & Co. Ltd., Copenhagen, Denmark Production era: Late 1970s – mid-1980s (Heavy Duty series) Design: Precision bore machining equipment for line boring engine blocks and gear casings Maximum boring length: 2500 mm Boring diameter range: 25 mm – 200 mm (depending on accessories) Nledpfx Ajz Rw T Esireh Table length: 2500 mm Spindle speed: Infinitely variable or multi-stage adjustable hydraulic/mechanical drive Feed: Automatic, fine-adjustable longitudinal feed for micron-level surface finish Frame structure: Vibration-free, special cast-iron bed with integrated support bridges Machine weight: approx. 1800 – 2200 kg (depending on equipment) 2. Accessories and equipment • Complete boring bar set (in various diameters and lengths) • Precision clamping blocks and support units for block alignment • Centering bridges and dial indicator measuring devices • Tool setting micrometer • Integrated control panel with emergency stop • Boring grinder / milling auxiliary unit (depending on model)

Condition: new, Year of construction: 2025, Roll forming metal siding “double façade panel” machine SPM-2 Roll forming metal siding “double façade panel” machine SPM-2 is new design product of our company for façade and wall metal panels forming with the necessary configuration. These double façade panels are very popular in construction business of cladding residential buildings and industrial structures, for the construction of fences of various configurations, gazebos, roofing elements, etc. The SPM-2 metal siding production line is fully automatic and consists of a rolling part of the machine, an automation system and guillotine cutting shears at the machine exit. The line can have as additional parts a manual or automatic uncoiler for metal rolls, depending on the customer's needs. Nodexghngspfx Airolh As standard version, this metal siding double façade panels roll forming machine SPM-2 makes a flat panel profile, but with the additional equipment, it is possible to roll panels with a microwave or rib shape profile. To start rolling, it is necessary to install a roll of metal to the decoiler and to put the end of the strip to the first rolling rollers of the equipment and feed it into them. After step by step, to put the metal to the next rollers, adjusting it if necessary. When metal comes to the cutting device of machine you need to feed metal into cutting knives and to make “zero” cut. After such step, equipment can move to automatic operation mode. The control panel of machine has the ability to set the number of tasks and the length of products, single tasks or to work in multitasking mode. After setting up necessary parameters the machine will automatically roll the metal cladding wall panels and cut them into necessary sizes. Thus, the customer will receive final product as quickly as possible and with the highest possible result. The roll forming speed is adjustable and can be up to 10-15 meters per minute. The SPM-2 metal wall cladding panels production line has special tools for punching out fastening holes on the side of the panel. It makes possible for the customer to get more interesting solution options and to offer a wider range of products to the end user. The rolling part of the machine has 18 pairs of forming steps, ensuring high quality of final product. You can get machine with protective cover or without it as per your request preferences. Specifications Material width (mm) 416 The material thickness (mm) 0,4-0,5 Engine power (kW) 3 + 1,1 Rolling speed (m/min) 10-15

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Nodpexxb Rrefx Airslh Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2019, TECHNICAL DETAILS Nledpfx Aie Aayk Roroh General Information Manufacturer: XYZ Machine Tools Model: SL 1100 / 1500 mm Machine Type: Heavy-duty CNC turning machine Year of manufacture: 2019 Condition: well-maintained Control System Control system: Siemens ShopTurn / Siemens CNC 840D Working Area Distance between centers: 1,500 mm Swinging diameter over bed: 1,100 mm Spindle bore: 165 mm Spindle and Drive Main drive: 70 kW Speed range: max. 660 rpm Machine Construction Bed width: 558 mm Machine bed: heavy cast iron construction Tailstock: included, electric Operating Condition Inspection: possible by appointment Functional test: possible via video before shipping or collection EQUIPMENT Siemens ShopTurn Siemens CNC 840D Electric tailstock Automatic central lubrication Coolant system Full enclosure Large chuck Safety guard Work area lighting

Condition: new, 10 pcs. cutting inserts/blades from Allied Machine & Engineering Wohlhaupter 211021-34 3 Series T-A Diameter 45 mm C1 Carbide AM200 for drilling Nljdsz Hbx Njpfx Airoh

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar Nlsdex D Tbmjpfx Airsh YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Njdpfxezi Awhj Airolh Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 110 kg, tank capacity: 10 l, machine/vehicle number: CARBON-973, Equipment: CE marking, It performs in-engine carbon and soot cleaning using hydrogen technology in all gasoline, diesel, LPG, and hybrid engine vehicles. It has a hydrogen gas production capacity of 1,500 liters per hour, and the gas duration can be adjusted as needed. It can clean engines up to 3,500 cc in diesel vehicles and up to 6,000 cc in gasoline vehicles. It operates with a 220V / 230V – 10 Ampere electrical infrastructure. It provides effective cleaning of air intake pipes, throttle body, injector nozzles, piston oil rings, intake and exhaust valves with their lower surfaces, piston surface, and the upper surfaces of intake valves. It helps to clean carbon and soot buildup in critical engine components such as MAF and MAP sensors, cylinder head air passages, EGR valve, turbocharger, and manifold. Without requiring disassembly and reassembly, it cleans in-engine soot and carbon deposits with high efficiency in a maximum of 1.5 hours. Nlsdpfxsz D Sw De Airsh After an approximately 45-minute process, it supports engine performance and helps to achieve up to a 10% improvement in lost horsepower. It contributes to the optimization of fuel consumption, supporting the achievement of performance close to factory specifications. It offers an economical and efficient solution with a high price-performance advantage. It contributes to bringing exhaust emission values closer to ideal operating levels. It supports the engine running quieter, smoother, and with less knocking. It helps to reduce potential engine failures and maintenance costs caused by carbon buildup.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, IN EXCELLENT CONDITION - ORIGINAL PAINTWORK XYZ SMX 3500 CNC TURRET MILL PROTO TRAK CONTROL 3 AXIS CONTROL TABLE SIZE 1370 X 356 MM Nedpfxsz Eh Ege Airjlh TRAVELS - X 770 / Y AXIS 500 / Z 500 MM 40 TAPER SPINDLE QUILL DIA 100 MM AIR DRAW BAR SPINDLE SPEED 40 - 5000 RPM TABLE GUARDS WEIGHT 2.4 TONS THERE IS ONE TOOL IN THE SPINDLE THAT WILL GO WITH

Year of construction: 1997, condition: ready for operation (used), Machine is fully refurbished & ready to work with dedicated inspection table ( size 2500 mm long x 850 mm width ), we have more if you need in your factory, price for two or more machine could be under negotiate. Nodpfx Aoxcal Ajirelh The large onion peeler from M&P engineering tops, tails and peels onions of 45mm to 115mm diameter using self adjusting floating knife assemblies over a range of up to 25mm on any one setting. It then slits the onion horizontally from top to tail, the depth of slit is determined by onion quality and grade. The machine finally removes the skin using compressed air providing an end product of optimum appearance.

Condition: good (used), Year of construction: 2017, Traverses X Y Z: 355 x 305 x 455mm, Nledpfx Aioz St Hwjrjh Table 457 x 381mm, Spindle speed 50 – 6000 rpm, Spindle taper BT30, Spindle Motor 3Hp, Prototrak TMX Control, 8 Station ATC, coolant, Low Volt light.

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, table load 500 kgs, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, Nledpfx Aiez R Rbdjreh rapid feed XYZ axis 20m/min, Spindle taper BT40, 24 station ATC.

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Nodexmhx Eopfx Airjlh Engine power: 22 kW. Dimensions: 1400 mm x 600 mm x 1100 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Condition: used, Year of construction: 2021, machine/vehicle number: DW2110130101, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 380 V, input current: 85 A, type of input current: three-phase, workpiece length (max.): 3,000 mm, workpiece width (max.): 2,000 mm, workpiece height (max.): 30 mm, number of axes: 4, number of slots in tool magazine: 10, total height: 2,400 mm, total length: 4,300 mm, total width: 2,250 mm, overall weight: 2,000 kg, table length: 3,000 mm, table width: 2,000 mm, year of last overhaul: 2025, Equipment: CE marking, We offer this used Apollo 4AX 2030 CNC Router, year of manufacture 2021. Manufacturer: Apollo Model: 4AX 2030 Year of manufacture: 2021 Condition: used Machine type: CNC Router If you have any questions or need more information, feel free to send us a message or give us a call. Nedpfez Iz Imox Airelh

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm Nsdoxdmgvopfx Airolh CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine. -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm. -Minimum Material Length: 145 mm. -Quick Change System for Straightening Rollers: Standard. -Flattening Gap Adjustment: Servo Hydraulic with PLC Control -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm Nodpfx Aekyrphjirolh -Total Weight: 40.000 kg..

Condition: new, Year of construction: 2026, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. Key Specifications: -Material Thickness: 1 – 15 mm. -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled. Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg Nljdpfekyrqfox Airsh

Condition: excellent (used), Year of construction: 2023, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Nedpfx Aijz Srv Dsrelh +/- 35mm Y axis, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2013, Traverses X Y Z: 1020 x 610 x 620mm, Table size 1200mm x 600mm, spindle speed 12000rpm, Nodpfx Aoz Eh Nloirjlh spindle motor power 14.7kW, Siemens 840DSL control with Shopmill, 43M/min rapids, Spindle taper BT40, 30 station ATC, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Nljdsyahv Sjpfx Airjh Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. Njdpfx Aiozxgglorelh All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: new, Year of construction: 2026, *TFON Leveltech® Leveling Machine Series. -Models: M-5560, M-5511, M-5513, M-5516 -Engineered for precise leveling of materials with a thickness range from 1.0 mm to 15.0 mm, these models offer flexibility in material width and advanced control features for optimal performance. -Material Thickness: 1.0 mm – 15.0 mm -Maximum Material Width: M-5560: 600 mm M-5511: 1.100 mm M-5513: 1,300 mm M-5516: 1,500 mm Minimum Material Length: 110 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Machine Weight: M-5560: 12.000 kg M-5511: 15.000 kg Nsdpfxshwb Uwe Airslh M-5513: 18,000 kg M-5516: 19.000 kg Machine Dimensions (L × W × H): M-5560: 2,800 × 2,905 × 1,950 mm M-5511: 3,300 × 2,905 × 1,950 mm. M-5513: 3,500 × 2,905 × 1,950 mm M-5516: 3,700 × 2,905 × 1,950 mm