Used Zhejiang Baina 150 20D Cold Feed Rubber Vacuum Extruder for sale (27,141)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, Cold Feed Rubber Vacuum Extruder 150mm 20d manufactured by years: 2020 condition in new Equipment type E150-01-00 Screw diameter 150 mm Screw Speed 1-50 r/min Max output Around 1000kg/h Iedpfxoy Ez Erj Agpetk Temperature control system The heating section number/power 6kw×7 Application Rubber extrusion mixing and plasticization, and extrude certain size of products in accordance with the machine head External dimensions 4200×1600×1500 (L×W×H)mm Extrusion system The feeding way Side rolls transmission power through the screw, active feeding. Feeding structure Feed roller gear and the screw gear, and with automatic lubricating device. Screw material 38GrMoAcA Screw hardness HRC65-68 hardness of steel sleeve HRC65-70 Nitriding depth 0.4—0.7mm Screw structure With exhaust slot, with good performance of Pressure control With the pressure sensor, pressure protectionvalue 0-35MPA adjustable, also with a temperature sensor L/D 20:1 Cooling section 1 section (side rolls) Vacuum pump power 2.2 KW Temperature control Automatic control heating, cooling by electromagnetic valve Circulating pump brand Weile Cooling water pressure 0.15-2 kg/cm2 Temperature control accuracy ±1℃ Screw and the gear box Involute connection Drive of the motor and the reducer Belt drive Hardened reducer model Reducer (involute) ZLYJ420-28-I speed regulation Frequency conversion 2. Rubber sheet head(Pneumatic) 1 Equipment type E200-PDJT-03-00 2 Equipment use With the use of extruder, extrusion foaming plate for expansion Dimensions 1170×510×330 (L×W×H) mm Head Material 40Cr Heating mode By mold temperature unit, the water cycle control Heat treatment Quenching and tempering, carburizing Surface treatment electroplate runner structure Straight type

Year of construction: 2019, condition: excellent (used), functionality: fully functional, 120 mm cold feed vacuum rubber extruder (20D) suitable for rubber production (EPDM, SBR, NBR). Siemens motor, 0-50 r/min. Total power 155 kW. Iodpsxnpx Nefx Agpjtk

Condition: like new (used), Year of construction: 2020, Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) Iodpsy Exrpsfx Agpstk 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers*12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are interested, we will send you a detailed description and data.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Itodjtqu Dijpfx Agpok Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: excellent (used), For sale: a Rietschle VFT 40 (111) vacuum pump, manufactured by a reputable German company. This unit is designed for industrial applications requiring vacuum generation, including packaging machines, printing machines, woodworking machines, CNC machines, and vacuum-based transport systems. The pump is equipped with a three-phase Flender ATB-Loher motor with a power of 1.5 kW and is mounted on a robust mounting plate. Technical specifications: Manufacturer: Rietschle Model: VFT 40 (111) Year of manufacture: 1996 Country of manufacture: Germany Type: vacuum pump Performance: 40 m³/h (50 Hz) Itsdpfx Ageziw N Sopjk 48 m³/h (60 Hz) Maximum vacuum (ultimate pressure): 150 mbar (abs) Motor power: 1.5 kW (50 Hz) / 1.8 kW (60 Hz) Rotational speed: 1420 rpm (50 Hz) 1680 rpm (60 Hz) Power supply: 3×400 V Motor protection class: IP54 Serial number: 1749048 Condition: Used. Visual condition is consistent with the photos. Robust construction, ready for further operation.

Condition: used, mileage: 1 km, power: 186 kW (252.89 HP), first registration: 11/2001, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,500 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, total length: 7,050 mm, total width: 2,500 mm, Year of construction: 2001, = Additional options and accessories = Itedpfxszucnqs Agpjk - PTO = More information = Front axle: Tyre profile left: 50%; Tyre profile right: 50% Rear axle: Tyre profile left: 50%; Tyre profile right: 50% Number of cylinders: 6 Empty weight: 9.720 kg Carrying capacity: 8.880 kg GVW: 18.600 kg Price: On request Registration number: BL-NV-53 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. Ijdpfx Agjy Ufk Rspotk All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8320’ black-and-white production system Items for sale: 1 x Ricoh Pro 8320 with the following specifications: incl. Vacuum Feed LCIT RT5120 incl. Booklet Finisher SR5120 incl. Trimmer Unit TR5050 Iodpfx Ajzaqi Iogpstk Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 13,754,808 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! Before dispatch or collection, a functional test will be recorded on video for you. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, This offer is for a used black-and-white production printer, the ‘Ricoh Pro 8300s’ Item for sale: 1 x Ricoh Pro 8300s with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 2,343,873 pages Condition: Itedpjywryqsfx Agpok This is a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2007, condition: used, Colour: Grey Empty weight: 500 kg Isdjwh Nfrjpfx Agpotk Dimensions (LxBxH): 270 x 70 x 246 cm - Year: 2007 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 13.02.01.10372/1 - Transport dimensions: 2700mm x 700mm x 2460mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Itsdpfx Aozump Esgpsk Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Ijdpfszvbyzex Agpstk dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: excellent (used), Description Technical data: Itsdpfx Agjy H Sxljpjk Product number PVL 150 B Motor power: 2 kW Capacity: 146 m3/h Max vacuum: 5 mbar Noise level: 74 dB Rotational speed: 1500 rpm Weight: 150 kg Dimensions [H x L x W]: 711 x 381 x 310 mm The pump achieves a vacuum of 5 mbar, confirmed by measurement on the sensor in the attached video below. Pump in very good condition New oil New oil filter Oil-lubricated vacuum pump, suction unit – a device used in technology for the removal of gases (creation of vacuum) in an enclosed space. Pumps are categorized based on operating principle as: positive displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters for vacuum pumps are: Ultimate pressure (the lowest pressure achievable by the pump), Pumping speed and its dependence on pressure, Capacity (usually measured in m3 of gas pumped per unit of time).

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. Itjdpst Tvx Tjfx Agpek - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels.

Year of construction: 2015, condition: ready for operation (used), machine/vehicle number: Nº 6 Y Nº 7, Equipment: CE marking, WINDLASER LS1626 Plus 150 W Industrial CO₂ Laser Machine Approximate working area: 2,600 × 1,600 mm – Complete equipment, ready for production Unit price per machine: €7,900 + VAT For sale: WINDLASER LS1626 Plus 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before dismantling. The machine is being sold exclusively due to a technological upgrade, following the introduction of new, state-of-the-art RF industrial laser equipment. It is equipped with a professional Ruida DSP controller, RDWorks software, and comes with a computer, fully configured for immediate operation. Its large working area of approximately 2,600 × 1,600 mm allows for the comfortable machining of entire MDF, HDF, plywood, acrylic, cardboard, leather, foams, rubbers, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube, and is also supplied with a brand new 150 W RECI laser tube, providing the buyer with a significant reduction in future maintenance costs. Included equipment The price includes: • WINDLASER LS1626 Plus 150 W industrial laser machine. • Approximate working area of 2,600 × 1,600 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • S&A CW-6000 industrial chiller. • Installed and functioning RECI 150 W laser tube. • Brand new RECI 150 W replacement laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. _____ Materials that can be processed Ideal for cutting and engraving: • MDF • HDF • Plywood • Acrylic (PMMA) • Cardboard • Leather • Rubber • Technical foams Itjdpozmqa Eefx Agpok • Non-metallic plastics • Other materials compatible with CO₂ laser technology A purchase with guarantees The machine can be seen in operation before dismantling. The buyer can personally verify its operation, precision, speed, and cutting quality, acquiring industrial equipment ready to continue producing from day one. _____ More than just a used machine It is delivered as a complete industrial production system, including strategic spare parts and high-value accessories that significantly reduce future maintenance costs, minimize the risk of production downtime, and allow you to start manufacturing from day one with complete confidence.

Year of construction: 2021, operating hours: 2 h, condition: new, functionality: fully functional, machine/vehicle number: 211 02 24, We offer the following for sale: For sale: GLOBAL Vacuum Presses GGTP-P-3116 Professional membrane vacuum press in excellent, like-new condition. The machine has only been used once and is virtually brand new. This equipment is an ideal choice for furniture manufacturing and woodworking applications: perfect for foil lamination, veneering, and precision pressing of curved and flat surfaces. It features a robust design, reliable operation, and uniform pressure distribution. Key features: - Model: GGTP-P-3116 Professional - Working area: approx. 3100 × 1600 mm - Membrane vacuum technology for precise and even pressing - Suitable for applying PVC foil, veneer, and other coatings - Sturdy, industrial-grade construction - Easy to operate Serial number: 2110224 Weight: 640 kg Year of manufacture: 2021 Pressure: 9.9 T/m² Power: 1.5 kW Itedpfsy Dhr Nsx Agpsk Frequency: 50 Hz Phases/Voltage: 3+N / 380 V Current consumption: 2.2 A If you have any questions or require further information, please send us a message or call us. The machine is ready for immediate use, in as-new condition, and can be tested on site.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Ijdpfx Aozti Tksgpotk Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES Itjdpfx Aezh Ia Segpjk – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: used, Length: 315 cm Belt width: 150 cm Distance between scrapers: 31 cm Scraper height: 5 cm Drive roller diameter: 11 cm Side rail height: 11 cm Overall height: 24 cm Belt for food processing Stainless steel Itjdpezdux Tsfx Agpok Manufacturer: Haith Please see my other listings.

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: LEADTECH throughfeed grinder – 2 grinding units + sanding shoe, working width 400 mm. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company’s premises. The machine’s greatest advantage is the arrangement of two grinding units complemented by a sanding shoe, which enables both surface leveling and more precise finishing. The first unit is equipped with a rubber roller with a diameter of 210 mm, while the second unit has a rubber roller Ø110 mm, a sanding shoe, and a metal roller Ø75 mm. Pneumatic oscillation ensures proper guidance of the abrasive belt during operation. Specifications: • manufacturer: LEADTECH • year of manufacture: 1998 • maximum working width: 400 mm • maximum working height: 130 mm • number of grinding units: 2 • first unit: rubber grinding roller Ø210 mm • second unit: rubber roller Ø110 mm, sanding shoe, and metal roller Ø75 mm • width of sanding shoe: 400 mm • main motor power: 11 kW • manual adjustment of working height • pneumatic oscillation of abrasive belt • width of conveyor: 400 mm • length of conveyor: 1100 mm • dust extraction outlets: 2 × Ø120 mm • weight: approximately 550 kg • overall dimensions: 150 × 86 × 155 cm (L × W × H) Applications: • sanding of solid wood components • sanding of panels and glued components • leveling and calibrating surfaces • intermediate sanding • finishing sanding using the sanding shoe • preparation of surfaces for painting, oiling, or further processing • processing of components with a width of up to 400 mm and a height of up to 130 mm Additional information: • the photos show the actual condition of the offered machine • free training on machine operation at our company’s premises • the price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; for domestic sales, 23% VAT will be added Iedpfx Ajzubxuegpjtk Financing and transport: • we arrange transport using our own MDD fleet or through external carriers • we assist in obtaining leasing or loan financing • delivery costs depend on the destination and the method of transport

Year of construction: 2019, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001, Equipment: CE marking, DEKCEL 150 W Industrial CO₂ Laser – Usable Area: 2,650 x 1,450 mm – Complete equipment ready for production Price: €7,500 + VAT For sale: a DEKCEL 150 W industrial CO₂ laser cutting and engraving machine, currently in operation at our facilities and available for demonstration before disassembly. The machine is being sold exclusively due to a technological upgrade following the introduction of new, state-of-the-art RF laser equipment. Equipped with a Ruida DSP industrial controller, RDWorks software, and a fully configured computer, it is ready to start working from day one. Itodpfjzmqaxex Agpok It features a large usable working area of 2,650 x 1,450 mm, ideal for machining entire sheets of MDF, HDF, plywood, acrylic, cardboard, leather, foam, rubber, and other non-metallic materials. The machine incorporates a fully operational 150 W RECI laser tube and also comes with a second, brand-new 150 W RECI laser tube, providing the buyer with significant savings on future maintenance costs. The price includes: • DEKCEL 150 W industrial laser machine. • Usable working area: 2,650 x 1,450 mm. • Ruida DSP industrial controller. • Computer with RDWorks installed and configured. • CW-5200 industrial chiller. • Installed and operational RECI 150 W laser tube. • New spare RECI 150 W laser tube. • Complete new optical head. • Two spare high-voltage power supplies. • Three industrial fume extractors. • New cable carrier chain. • Various additional spare parts. The machine can be seen in operation before disassembly, allowing you to verify its performance, precision, and cutting quality. An excellent opportunity to acquire a large-format industrial machine that is fully operational and comes with a significant set of accessories and spare parts, ready to continue production from day one. _____ This is not just a used machine; it is delivered as a complete industrial system with strategic spare parts included, which minimizes maintenance costs and ensures quick start-up.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Industrial spinning extruder from an Oerlikon Barmag production installation, suitable for polymer processing and nonwoven applications. 2 extruders are available for sale at the moment. The machine was manufactured in 2020 and has seen very little use. Machine details: Manufacturer: Oerlikon Barmag / BBE Engineering Type: 9E10/30D-HT Project: P13000 Year of manufacture: 2020 Application: spinning / polymer extrusion / nonwoven production Polymer configuration: PP Iedpszulh Tsfx Agpstk Single-screw extruder Industrial heavy-duty design The original Barmag documentation identifies the unit as a “Spinning Extruder” and covers its operation as part of the complete production plant. The equipment includes the extruder with drive system, feeding/dosing equipment, electrical/control equipment and associated components as shown in the photographs. Components from well-known industrial manufacturers including Siemens, Flender, Nordson and Oerlikon Barmag are installed. The machine is currently still installed, which allows the buyer to inspect the equipment in its existing installation. Condition: Used, very low operating use Year: 2020 Availability: Immediately / by arrangement Location: Germany Extensive original technical documentation is available for the machine, including operating and maintenance documentation, drawings and information concerning the drive, gearbox, heating, cooling and electrical systems. The documentation also includes drawings and technical information concerning the extruder and its associated equipment. The complete PDF documentation with detailed technical specifications can be provided to interested buyers upon request. Additional photographs and information are available upon request. Worldwide inquiries are welcome.

Condition: new, Roller diameter: 140 mm Roller width: 50 mm Bore diameter: 35 mm Keyway: 10 mm Iodsyucufepfx Agpstk Price per piece: 37 EUR

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % Itjdpjznz Ezjfx Agpek • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: PRTC-1500C, total length: 2,800 mm, total width: 1,050 mm, total height: 1,650 mm, warranty duration: 12 months, overall weight: 950 kg, input voltage: 380 V, power: 6 kW (8.16 HP), 45 m³ vacuum pump 2 HP cooling system KR373 geared motor 7'' HNC operator panel PLC control Complete stainless steel housing 1050x2800x1650 mm Itsdpfx Agsydlk Uspjk 950 kg