Used Zippel K1-100-2Lb for sale (23,596)

Condition: not inspected (used), Year of construction: 1995, functionality: unexamined, machine/vehicle number: 467, workpiece weight (max.): 500 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cjdpfxoyv Aupo Aa Nerb Workpiece weight: 500 kg Maximum temperature: 65 °C Filling volume: 2 x 300 L MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Total power requirement: 84 kW Heating capacity: 54 kW Permissible operating overpressure: 2 - 8 bar

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, Working, new pumps. Crodpey Ev Hqofx Aa Nob

Condition: used, Year of construction: 1999, Technical details: Crodjymc Txepfx Aa Neb pass through height: 2000 mm tank capacity: 800 l cycle time: - sec Heating capacity: 45 kW electrics - voltage/frequency: 400/50 V/Hz lifting capacity: 2000 kg temperature range: max. 65 °C total power requirement: 63 KW daylight opening: 2000 mm space requirements of the machine approx.: 3.800 m *

Condition: ready for operation (used), Year of construction: 2014, Spänex SHB 100 R K1 briquetting press Motor capacity: 100 kg/h Throughput: 0.9 m³/h Briquette diameter: 70 mm Crodpoy Dc Tujfx Aa Nsb Motor power: 7.5 kW Year of manufacture: 2014 Price: 10,500.- Better photos coming soon

Condition: used, Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. Crodpfx Aaswk Dwns Nob The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance Cedjwka S Iopfx Aa Norb - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. Credpfjy Hfnmsx Aa Nob The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Crsdpjx Twcpsfx Aa Njb

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 05/2027, type of input current: AC, year of last overhaul: 2026, Baumkuchen Machine BK 100 1000 mm working width Dipping tank Frame with storage shelf 220V drive Dimensions: 1450 x 700 x 1500 mm (W x D x H) Used unit, cleaned Crjdpfxoy Ac H So Aa Neb with warranty

Condition: used, Year of construction: 1996, pressure 100 t throat 510 mm stroke 600 mm dayligth 1000 mm Crsdevuunmepfx Aa Nsb table surface area 1025 x 650 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 600 x 400 mm table height over floor 970 mm ram surface 1025 x 650 mm feed down 350 mm/sec feed up 330 mm/sec working feed 30 - 43 mm/sec oil volume 540 l total power requirement 48,0 kW weight of the machine ca. 12,0 t required space 1,2 x 2,7 x 3,9 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, hydraulic drawing cushion in table Video of the finished 'sister machine' - with new electrical control - available

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,860 kg, maximum load weight: 7,040 kg, overall weight: 9,900 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle tipping trailer Welded steel construction, continuous tipping shaft at the rear with 80 mm ball tipping bearing Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguards Lockable storage space for access ramps underneath the loading area 1 pair of ramps 3,000 mm long, 360 mm wide, load capacity per pair 4,000 kg (suspension bar for ramps at the rear) Towing device for central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension GFA or BPW axles of the manufacturer's choice, with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Hand spindle parking brake Integral air reservoir ABS and ALB, with ABS plug at the front, with connecting cable, Cjdpfxei Ri Eij Aa Nerb Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 swap-proof coupling heads at the front, with connecting cables to the motor vehicle, Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable, Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Hydraulic actuation via truck power take-off Tilting bridges Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and non-oscillating without central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom. Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom. Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Dropside/bridge RAL 9010 pure white Note! Bridge inside only primed if painted bridge version! Attention! These are archive pictures. Also available IMMEDIATELY with 5m bridge!

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm Crsdpfx Aoyvpm Soa Njb -Weight: 176 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 13200 € 253.44 € Crodpfoypbtiox Aa Neb 100 to horizontal verschiebbar 300 mm 1570 mm 220x160 mm 5 mm/s 10 mm/s 2560 mm 1000 mm 2480 mm 1755 kg horizontal movable cylinder by handwheel steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2026, saw blade diameter: 360 mm, cutting height (max.): 100 mm, cutting range round steel at 90°: 100 mm, saw blade speed: 160 rpm, cutting range square steel at 90°: 75 mm, cutting diameter: 100 mm, rotational speed (min.): 160 rpm, rotational speed (max.): 160 rpm, Equipment: rotational speed infinitely variable, Fully Automatic High-Speed Circular Sawing Machine – CHK-100 Circular sawing machines are industrial cutting machines used for the high-precision and fast cutting of pipes, profiles, and solid metal materials. They are widely utilized in mass production lines to achieve rapid, repeatable, and clean cuts. The CRONOSSTECH CHK Series Fully Automatic High-Speed Circular Sawing Machines deliver high production efficiency thanks to their robust mechanical construction and advanced automation systems. With a PLC-controlled automation system and touchscreen operator panel, cutting parameters can be easily set, enabling highly precise, fully automatic cutting operations. A ductile cast iron machine body, strong transmission system, and servo feed technology ensure vibration-free operation and long tool life. CHK Series machines are engineered for the fast and precise cutting of pipes, profiles, and solid materials. Key Advantages • Fully automatic cutting operation • High-speed circular sawing technology • Servo-driven feed system • PLC-controlled automation system • High cutting accuracy and stability • Heavy-duty machine construction for industrial use Fields of Application • Steel service centers • Metal processing plants • Pipe and profile manufacturers • Machinery manufacturing industry • Automotive and supplier industry Standard Features • Precise cutting and smooth surface finish • Special gearbox design • Automatic lubrication system • Centralized lubrication system • Adjustable vise pressure system • Servo-driven feed system • Automatic loading system • Pallet conveyor system • Electromagnetic brake system • Scrap separation system • Diameter control system • Hydraulic motor-driven chip cleaning brush • Pneumatic pressure control system • User-friendly operation with PLC control unit Crodpfxeyq N Iwo Aa Nob • Torque control system for extended blade life • Easy adjustment of vise pressure by material type Technical Specifications – CHK-100 Cutting Capacity (Round): Ø25 – 100 mm Cutting Capacity (Square): Max 75 × 75 mm Cutting Capacity (Rectangular): Max 90 × 70 mm Main Motor Power: 11 kW Hydraulic Motor Power: 3 kW Material Feed Motor Power: 2.2 kW Circular Saw Blade Size: Ø360 × 2.25 × 2.6 mm Blade Speed Range: 40 – 160 rpm Single Stroke Feed Length: 630 mm Bundle Material Feed Length: 3000 mm Trim Loss Length: 60 – 70 mm Machine Weight: 3800 kg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 8300 € 160.19 € 1 100 to horizontal verschiebbar 300 mm Crsdpswirtzsfx Aa Neb 1070 mm 5 mm/s 10 mm/s 2110 mm 1000 mm 2430 mm 1500 kg demo machine / mint condition net price (price for new machine € 9.000,00) horizontally displaceable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 34200 € 653.22 € 100 mm 315 mm 3 7.5 kW 7 m/min 100x20 mm / 800 mm; 30x10 200x30 mm / 1.200 mm; 160 60x60 mm / 750 mm; 15x15 Ø 75 mm / 800 mm; Ø 15 mm Ø 125x2,5 mm / 1.400 mm; 100x40x4 mm / 1.300 mm; 2 80x80x5 mm / 1.500 mm; 25 100x100x12 mm / 1.000 mm; 100x100x10 mm / 1.000 mm; UPN 180 / 900 mm; UPN 30 UPN 180 / 1.000 mm; UPN 3 IPN 180 / 1.000 mm; IPN 8 1465 mm Credeynmrzopfx Aa Njb 2000 mm 1700 mm 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: M60L/8583, Offer Number: M60L/8583 Machinetype: screw washing machine Make: MOC DANNER Type: Shark 100 Constr. year: 2014 capacity: 250 Kg setting plane: output: Location: In our warehouse Crodswi Swyopfx Aa Neb

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6400x1500x1780 mm Total power requirement 19 kW Crodpfowt Ua Esx Aa Neb Weight 1800 kg

Condition: good (used), functionality: fully functional, year of last overhaul: 2022, input voltage: 400 V, DGUV certified until: 03/2027, overall weight: 400 kg, total width: 1,000 mm, total length: 1,250 mm, input frequency: 50 Hz, input current: 16 A, electrical fuse: 16 A, Dough mixer, kneader Werner & Pfleiderer Double-cone kneader WP DK 100 Removable bowl trolley Robust technology Flour dust cover Connection 400V, 16A CEE plug Used machine More bakery machines in stock! Cedpfx Aaju Uakze Norb

Condition: used, Gate valve vacuum pump Condition: Inside and outside absolutely as good as new, overhauled and repainted Warranty: 12 months Manufacturer: Leybold Type: DK 100 Make No.: 11106 Motor: 400V DS Operating medium: mineral oil Included: Instruction manual Oil mist separator optional Delivery time: on request Crodpfxoctlqbs Aa Nob Photo shows a reconditioned DK200

Condition: new, Year of construction: 2022, functionality: fully functional, Technical data = see data sheet PDF. Csdpoup Dznofx Aa Nsrb

Condition: used, Year of construction: 1992, pressure 100 t table length 1800 mm Crsdpfoyt R H Tex Aa Njb table width 1550 mm table travel 2000 mm dayligth 1800 mm total power requirement 19,5 KVA weight of the machine ca. 22 t

Year of construction: 2025, condition: used, New: Yes Empty weight: 35 kg CE mark: yes Serial number: 25050168 Transport dimensions (LxWxH): 0,54x0,292x0,582 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information Cjdpfsxdhfgjx Aa Njrb

Condition: used, Year of construction: 1985, pressure 100 t distance between columns 1250 mm stroke 1035 mm table surface area 890 x 1280 mm distance table/ram, max. stroke up, adjustment up 1035 mm table height over floor 630 mm ram surface 1000 x 1200 mm side window 700 mm max. tool weight 7 t max. capacity of swivelling ram plate 3,5 t oil volume 180 l power capacity 9,0 kW weight 11,0 t Dimensions (WxDxH) 2,1 x 3,8 x 3,9 m with swivelling ram, movable table, inclining table, ejector in table, hydraulic ram interlocking Crsdpjvuumcsfx Aa Nob press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1981, pressure 100 t table length 1250 mm Crjdpfx Aoyqvtmsa Nsb table width 900 mm table travel 1200 mm dayligth 700 mm upper clamping surface: 1000x1200 weight of the machine ca. 12 t dimensions of the machine ca. . m Nominal force: 1000 kN Top plate pivots Table is movable The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team