Manitou M30-4 ST3B

Manitou M30-4 ST3B

Condition: used, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 140 l, lifting height: 17,550 mm, Equipment: air conditioning, Year of construction: 2023 Operating hours: 2.630 Empty weight: 11.700 kg Carrying capacity: 4.000 kg Kjdpezkaxlofx Anuenc GVW: 15.700 kg Dimensions (LxBxH): 627 x 242 x 250 cm Engine type: Deutz Deutz 854E-E34TA

Condition: used, Year of construction: 2024, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,200 mm, · Maximale seitliche Reichweite 3.30 m · Reichweite bei max. Hubhöhe 0.50 m · Ausbrechkraft mit Schaufel 4205 daN · Überhang vorne 0.99 m · Schüttwinkel 117 ° · Kippwinkel 12 ° · Wenderadius (über Räder) 3.31 m Ksdpfx Ajxd Htijnujnc · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Heben 7.30 s · Senken 4.95 s · Teleskop ausfahren 5.20 s · Teleskop Einfahren 3.70 s · Ankippen 3.20 s · Auskippen 3.20 s · Motor: Kubota, Motornorm, Stage V · Motor Modell V3307-CR-T-E5B · Anzahl der Zylinder - Tragfähigkeit der Zylinder4 - 3331 cm³ · Nennleistung Verbrennungsmotor / Leistung 75 Hp / 55.40 kW · Max. Drehmoment / Motordrehzahl 265 Nm @1400 rpm · Zugkraft 3240 daN · Wendelüfter Standard · Kühlsystem des Motors 2 Wasserkühler + Hydrauliköl · Getriebetyp: Hydrostatisch · Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 · Max. Fahrgeschwindigkeit (kann je nach Vorschriften variieren) 25 km/h · Differenzialsperre Sperrdifferenzial an der Vorderachse · Parkbremse: Automatische negative Parkbremse · Festellbremse Ölbad Lamellenbremsen an den Vorderachsen · Pumpenart: Zahnradpumpe · Hydraulikfördermenge - Hydraulikdruck: 86 l/min - 235 bar · Fassungsvermögen des Kraftstofftanks: 63 l · Schallpegel (LpA) gemäß Norm NF EN 12053 geprüft: 76 dB · Umgebungsgeräusch (LwA) 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 1 · Steuerungen: JSM

Condition: used, functionality: fully functional, Year of construction: 2003, operating hours: 7,350 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,755 mm, power: 38 kW (51.67 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 5,500 kg, total length: 4,080 mm, drive type: Diesel, construction width: 1,323 mm, All-terrain forklift Load center: 500 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Hydrostatic Speed class: 20 km/h Condition: Refurbished, without warranty Technical condition: Good Front tires type: Pneumatic Front tires condition: 60 - 80% Rear tires type: Pneumatic Kjdoy A T H Aopfx Anuonc Rear tires size: 700x12 14PR Continental Rear tires condition: 80 - 100% Description: The MSI 30 is a versatile mast forklift, unique in its class. It can be used in the wood and paper industries, recycling sector, logistics applications, and more. Whether indoors, in the yard, or on light terrain, the hydrostatic transmission combined with a powerful engine and two large-diameter drive wheels enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder for a very tight turning radius. With a wide range of available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It offers a lifting capacity of 3.0 t. Side shifter 3rd valve Rear work light Front work light Semi-cab Street legal (StVZO) Beacon Windscreen wiper

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 929 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, construction height: 2,500 mm, empty load weight: 12,400 kg, total length: 6,420 mm, drive type: Diesel, construction width: 3,790 mm, Telescopic forklift, rigid frame Speed class: 25 Knedpsv Swphjfx Anujc Technical condition: very good Description: Our equipment is regularly serviced and inspected. We offer rentals, sales, service, and repairs – you can get everything you need from a single source. We also offer lease-to-own options, financing, and the purchase of used machinery. Our team will be happy to provide you with competent and personalized advice. Simply call us or send us a message via SMS or WhatsApp. The Manitou MT 1840 Easy is a powerful telescopic handler for construction sites, as well as for lifting and material transport tasks. With a lifting height of up to 17.55 m, a load capacity of 4,000 kg, and all-wheel drive, this machine is ideally suited for working on uneven terrain and with heavy loads. Robust construction. High off-road capability. Ideal for lifting, assembly, and material handling tasks. Easy to operate and versatile. You can find more information and submit a non-binding inquiry on our website – Safe working at any height.

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,100 h, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 1,210 mm, fuel type: diesel, mast type: triplex, construction height: 1,988 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 4,950 kg, total length: 3,045 mm, drive type: Diesel, construction width: 1,450 mm, All-terrain forklift Load center: 500 Knjdpfx Anezhp Ahjusc ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: Very good Front tires Type: Pneumatic Front tires Condition: 80 - 100% Rear tires Type: Air Rear tires Condition: 80 - 100% Description: With the MC25, available as a two-wheel or all-wheel drive, you can load loads safely and precisely on any terrain. The 30 cm ground clearance guarantees excellent climbing ability on your fields. Good all-round visibility and the compact and robust design ensure optimum safety at work. Discover the MC25, your new partner for more productivity! This Manitou rough-terrain forklift is also available in two-wheel or four-wheel drive technology in the MC 25-2 or MC25-4 or MC 30-2 or MC 30-4 version. Sideshift, 3rd valve, rear working lights, front working lights, semi-cab, full free lift,

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 780 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 74 kW (100.61 HP), fork length: 1,200 mm, empty load weight: 11,300 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Telescopic handler rigid Load centre: 500 Mast type: telescopic Transmission: torque converter Speed category: 20 Condition: as new Technical condition: very good Front tyres type: pneumatic Front tyres size: 24 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Knsdpfezwh Egex Anujc Rear tyres size: 24 Rear tyres condition: 80 - 100% Description: Incl. basket control – radio control 3rd valve, rear work lights, front work lights, heater, full cab, air conditioning.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 960 h, load capacity: 2,500 kg, lifting height: 4,000 mm, free lift: 1,321 mm, fuel type: diesel, mast type: triplex, construction height: 2,045 mm, power: 44 kW (59.82 HP), fork length: 1,200 mm, empty load weight: 4,475 kg, total length: 2,260 mm, drive type: Diesel, construction width: 1,540 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Knedozh Rmbspfx Anuec Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: very good Front tire type: Pneumatic Front tire size: 15.5/55 R 18 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 60 - 80% Side shifter, 3rd valve, 4th valve, half cabin

Condition: excellent (used), fuel type: diesel, color: other, first registration: 06/1999, Year of construction: 1999, operating hours: 5,001 h, Dutch Manitou MT 1337 SLT Turbo, with only 5,000 hours and pallet forks = More information = CE mark: yes Technical condition: very good Visual appearance: very good Registration number: TNR-76-N = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Knodpfxezuc Spj Anuoc Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 280 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,440 mm, power: 37 kW (50.31 HP), fork length: 1,200 mm, empty load weight: 3,562 kg, total length: 2,950 mm, drive type: Diesel, construction width: 1,450 mm, Rough-terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Knsdpjyf Rvrofx Anuoc Front tires size: SOLIDEAL - SL-R4 - 12.5/80 R18 PR12 Rear tires type: Pneumatic Rear tires size: CAMSO - ED PLUS - 7.00-12 R12 PR12 Description: With the MC25, available in two-wheel or four-wheel drive versions, you can safely and precisely handle loads on any terrain. Its 30 cm ground clearance ensures excellent climbing ability on your fields. The machine's good all-round visibility, along with its compact and robust design, ensure optimum safety at work. Discover the MC25 – your new partner for increased productivity! This Manitou rough-terrain forklift is available with two-wheel or four-wheel drive technology, also in the MC 25-2, MC 25-4, MC 30-2, or MC 30-4 models. Side shifter, 3rd valve, 4th valve, heater, full cabin, full free lift, interior mirror, joystick, beacon,

Condition: used, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 5,550 mm, total length: 4,800 mm, All-terrain forklift Manitou M 30-4 Drive Diesel Knodpeztgabofx Anusc Year built 2025 Lifting height (mm) 5,550 Lifting weight (kg) 3,000