MANURHIN TRAMINER 20 CNC automatic lathe

Manurhin TRA 20

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Hedpfofxpbmox Achenr

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Hnedpfelccvmjx Achor Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: used, Year of construction: 1998, Turning length 322 mm Hnsdpjx N A N Hjfx Achor Max. swing over bed ways 510 mm Max. turning dia. 279 mm Spindle speeds 60-6000 rpm Spindle bore 53 mm Turret w/12 stations Control: Fanuc 21 T Equipped with: Magazine bar feeder Hatec Rapid Load 12 Tail stock Various tool holders & collets 3-jaw chuck

Condition: good (used), Parts shown by hand not come. Hnjdpfsyb R Ersx Achor

Year of construction: 2007, condition: good (used), Used 4.4kw Bystronic Byspeed CNC laser for sale Used Bystronic 4.4kw lasers for sale VIDEO BELOW: Byspeed 3015 4.4kw Installed new/year: 2007 Manufacturer: Bystronic Model: Byspeed 3015 Sheet size: 3metre x 1.5metre / 3000mm x 1500mm Laser power: 4.4kw / 4400 watt Control: ByVision CNC02 Automation n/a Year: 2007 Condition: good working condition / service from new Byspeed 3015 4400w March 2010 Power on: 44,189 hrs Cut time: 20,490 hrs Hsdpsgwa Swjfx Achjnr Good condition machine that has been covered from new by service contract with Bystronic UK. Options Included: Bypos automatic focus CutControl 2 cutting heads Tools and accessories Torit Dust collector Delivery, installation and tuition available at extra cost.

Condition: new, Year of construction: 2026, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ Hedpfx Acofz Anpshonr 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), Year of construction: 2008, EMCO MAX TURN 45, including LM 1200. Includes chip conveyor. More images will follow. Hnjdpfxjzhl Nwe Achsr

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Hnodpfxjcqm Rro Achjr Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Siemens control system, 12-station turret (VDI16), Hjdezkk Hyspfx Achenr collet chuck, jaw chuck, steady rest, driven tools, accessories

Condition: used, MAZAK QTN 100II MSY, manufactured in JAPAN, year 2009 Max. turning diameter: 280 mm Spindle max. speed: 6000 rpm Two Hainbuch collet chucks mounted on the spindle Spindle bore: 45 mm 12-station turret Hsdozrkztepfx Achsnr Counter spindle max. speed: 6000 rpm Tool probe Part catcher Bar feeder interface Axis travels: X: 185 mm Y: 100 (+/- 50) mm Z: 455 mm W: 460 mm Included with the machine: - 8 standard tool holders - 4 powered tool holders (2/2) - Documentation - Chip conveyor