Marel top and bottom labelling machine with conveyor

Marel

Condition: used, all stainless steel suitable for thermic oil heated (583 kW) with lower and upper belt frying length 8.600 mm belt width 630 mm adjustable speed frying time: 25-320 seconds Dsdpfx Aoz I N Saei Sscn oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 11.500 x 2.200 x 2.650 mm

Year of construction: 2004, condition: refurbished (used), MAREL PORTIO 4003 S ID.NO. 2179 Marel TVM Portio 4003 S portioner for exact weight of meat details. Year of courage 2004 very little used since new! Dimensions 260 x 70 H 260 cm. Dcsdpfxshpz Euo Ai Son

Condition: used, Year of construction: 2017, Checkweigher with colour touchscreen and statistics The Marel MCheck2 weighs every pack on the belt and removes underweight or overweight packs from the line automatically. The screen shows the average weight, standard deviation, number of rejects and throughput for each product. The weigher has a European type approval and its metrology marking dates it to 2017. It runs on 100–240 V and is built in stainless steel with guarded belts. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Checkweigher Controls: Colour touchscreen with product programs and statistics Reject: Automatic, with reject bin Electrical: 100–240 V, 50/60 Hz Compressed air: Max. 0.6 MPa Construction: Stainless steel, guarded belts Dodpfxsz Ndabj Ai Socn

Condition: used, Year of construction: 2005, Cuts fillets into portions by weight Dcodpjz Nc Rrsfx Ai Sen The Marel IPM3 X300 is a portion cutter for fish, chicken and meat fillets. Each piece is scanned on the belt, and the machine works out where to cut to get portions of a fixed weight or length. You get more out of every fillet with less trim left over. The machine was built in 2005 and has a perforated belt 280 mm wide. Settings are made on the control panel with a colour screen. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Portion cutter (fixed weight or fixed length) Products: Fish, chicken and meat fillets Belt: Perforated, 280 mm wide Scanner: Cameras with laser line Controls: Control panel with colour screen Electrical: 3 x 380–480 V Construction: Stainless steel

Condition: used, Year of construction: 2020, Manufacturer: Marel Model: Active Mixer 200 Year: 2020 Condition: Used Serial number: 10446009 Stock number: 3302 Mixer capacity: 200 litres Dcsdpfx Aiez Er Das Son Water pressure: 2 - 5 Bar Power: 3 x 400V, 50Hz, 7kW Dimensions: 1250 x 950 x 1800 mm Weight: 400 kg Semi-automatic tempura and batter mixer with programmable recipe management.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: A092469, Complete used Marel 24-station fish filleting and trimming Flowline with integrated OptiWeigher. The system is designed for manual fish filleting and trimming with product transport, operator workstations and production-data collection. When operated with the appropriate Marel Innova configuration, the Flowline can be used to monitor key production parameters including: - throughput, - yield, - operator performance, - production lots, - traceability, - real-time production data, - historical production results. Main equipment: - Marel 24-station Flowline - 24 operator positions - 24 manual work platforms - operator seats - product bins - secondary product / by-product bins - knife holders - water system - stainless-steel construction - Intralox PP conveyor belts - OptiWeigher - Flowline control cabinets OptiWeigher specification - Type: dwu 1900/2*225 - Year: 2012 Dedpsz H Tyfjfx Ai Socn - weighing accuracy: 2 g - belt width: 225 mm - variable-speed conveyor - nominal speed: 1.3 m/s - 3 × 400 V + N - software: A571 Flowline Flowline - Year: 2012 - base-part serial no.: A092469 - 24 stations - Intralox Series 1600 belts - stainless-steel food-processing design. Suitable for cod, haddock, pollock and other whitefish processing. The system is particularly suitable for processors who want not only a manual filleting/trimming line, but also measurable production performance and yield control. Possible integration with Marel Innova, subject to verification of the installed software licences, controller configuration and interface status. Technical documentation available. Inspection possible by appointment. Price on request.

Condition: used, Year of construction: 2019, Flash Labeler – Marel Concept 500 Manufacturer: Marel Ltd. Machine: Flash Labeler Model: Concept 500 Year of manufacture: 2019 Serial number: 10422443 Description The Marel Flash Labeller Concept 500 is an automatic labeling system designed for high-speed labeling in food processing and packaging lines. The machine applies labels quickly and accurately to products or packaging, ensuring reliable identification and traceability in production environments. Marel equipment is widely used in the meat, poultry, fish, and food processing industries due to its hygienic design and reliable performance. Technical Specifications - Manufacturer: Marel Ltd. - Model: Concept 500 - Machine type: Automatic labeling machine - Year: 2019 - Serial number: 10422443 - Voltage: 230 V ±10% - Frequency: 50 / 60 Hz - Current: 4 A - Short circuit rating: 5 kA - Protection rating: IP54 Dodjyt I Rcspfx Ai Sjcn - Nominal power: approx. 1 kW Key Features - High-speed automatic labeling system - Reliable label placement for product identification - Designed for industrial food processing lines - Compact and hygienic stainless steel construction - Easy integration into existing production lines Applications - Meat and poultry processing - Fish and seafood packaging lines - Food processing and packaging plants - Product traceability and labeling systems Condition Used More photos and full specifications: / Manufacturer: Marel Ltd. Model: Concept 500

Condition: used, Year of construction: 2016, Marel labeling machine - Concept 500 - Top labeller More photos and full specifications: / Dcjdpfx Aoxnkh Soi Son

Condition: used, Year of construction: 2014, Marel MS2730 Filleting Machine with Back Bone Trim High-performance automatic salmon filleting machine Available from August / September. This Marel MS2730 Filleting Machine is equipped with an automatic Back Bone Trim system, delivering excellent fillet yield and consistent product quality. The machine has been professionally maintained by Marel on an annual basis and is currently in good working condition. (Complete overhaul in 2018). Designed for medium to high-capacity fish processing operations, the MS2730 automatically adjusts to different fish sizes, ensuring maximum yield while reducing manual labor. Key Features - Automatic salmon filleting machine - Equipped with Back Bone Trim - High fillet yield and excellent cutting accuracy - Automatic adjustment to varying fish sizes - User-friendly touchscreen control - Hygienic stainless-steel construction - Easy access for cleaning and maintenance - Compact footprint - Annual maintenance carried out by Marel - Good working condition Technical Specifications - Manufacturer: Marel - Model: MS2730 - Capacity: Up to 25 fish per minute - Fish size: Approximately 1.5 – 8 kg - Power supply: 3 × 400 V + N + PE (50 Hz) - Power consumption: Approx. 5.5–7.0 kW (depending on configuration) - Water consumption: Approx. 15 L/min - Compressed air: Approx. 230–250 L/min at 6–8 bar - Dimensions (L × W × H): Approx. 3,150 × 1,035 × 1,980 mm - Weight: Approx. 1,450 kg (configuration dependent) Condition The machine has been serviced annually by Marel and remains in good operational condition. It is still installed and can be inspected under power by appointment. Availability: August / September. For additional information, pricing, or to arrange an inspection, please contact us. More photos and full specifications: / * Manufacturer: Marel * Model: MS2730 * Fish size: Approximately1.5 – 8 kg * Power consumption: Approx.5.5–7.0 kW(depending on configuration) * Weight: Approx.1,450 kg(configuration dependent) Dodpfx Aijzl Sydj Secn

Condition: used, all stainless steel electrically heated 386 kW with lower and upper belt frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system Dcjdsz D Aqzopfx Ai Sen electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm