Used Oil Painting On Canvas for sale (17,883)

Condition: used, Year of construction: 2002, - Brand : Oil & Steel / Nissan - Type : Scorpion 130 - Year of manufacture: 2002 - Hours: 4294 hours - Odometer: 61,205 km. - Weight: 3340 kg. - Drive: Diesel - APK: Working height: 13 meters - Lateral reach: 8 meters - Lifting capacity: 220 kg. - Aerial work platform book available - CE document available - Safety inspection possible - Dutch license plate - Export license plate possible - Video on our website - Trade-in and transport possible *Type: Scorpion 130 * Brand: Socage / Iveco * Construction year: 2002 * Hours: 4294 uur * Km. position: 61205 km. * Weight: 3340 kg. * Working height: 13 meters * Lateral reach: 8 meters * Lifting capacity: 220 kg. * APK: * Drive: Diesel Credpfxez Hw Nks Ai Soh

Year of construction: 2011, operating hours: 13,600 h, condition: excellent (used), functionality: fully functional, Technical data: BOBST VISIONFOIL 104 Max. sheet format: 1,040 × 740 mm Min. sheet format: 400 × 350 mm Max. embossing/hot foil stamping area: 1,010 × 702 mm Production speed: up to 7,500 sheets/hour Embossing force: up to 2.6 MN (286 US tons) Foil unwinders/web advance shafts: 2 standard Foil width: 25–1,020 mm Max. roll diameter: 250 mm Heating temperature: 20–160 °C Heating zones: 12, individually adjustable Paper: from 80 g/m² Cardboard/solid board: up to 2,000 g/m² Corrugated board: up to 4 mm Machine length: approx. 6.50 m Machine width: approx. 6.00 m Machine height: approx. 2.20 m 4 honeycomb plates Foundation exchange table (third-party product) Machine raised by 300 mm Machine is equipped with a foil braking brush (not visible in the video) or, if equipped with extraction/tube cutter, with a funnel system! High-performance machine for stable foil transport, even at high speeds and with long foil unwinders! Extremely short setup times for sheet processing and foil unwinding! Not a Chinese copy or a Bobst BMA replica! Machine has only 14,000 hours of operation! Condition very good! Credpfx Aiozt Iduo Sjh Bobst platen conditioning performed (die service) 5/26 Can be inspected at any time during production, and is encouraged! Available from December/January 2026/27 Videos available upon request via WhatsApp! Direct sale to a production company preferred! No dealer options will be offered! A package deal with a Bobst 102E2 is also possible (also with an exchange table and honeycomb foundation for blind embossing)!

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, Credpovmbzwjfx Ai Sjh TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: new, Year of construction: 2021, Layout: Round bale grab Empty weight: 7.500 kg Attachment suited for: Lifting equipment Capacity: 32 M.T. Jaw Aperture(min-max): 160mm/2400mm Crsdpfxopa Rmke Ai Seh Jaw Teeth Length: 200mm Open/Close Time: ~7,5 sec Axial Rotation Time: ~30 sec Axial Rotation Time: 270° Weight: 7500kg Crane Hook Type: DIN 15401 No:40 hook Ambient Temperature: 45 ºC Max. Coil Temperature: 1100 ºC Energy Supply Voltage: 400 VAC, 3 Faz, 50 Hz

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Crsdpfjw Hw Dgox Ai Ssh

Condition: new, mileage: 884 km, power: 100 kW (135.96 HP), fuel type: diesel, empty load weight: 3,425 kg, maximum load weight: 75 kg, overall weight: 3,500 kg, tire size: 225/65 16C, tire condition: 100 %, axle configuration: 4x2, wheelbase: 3,750 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, operating hours: 884 h, front tire size: 225/65 16C, rear tire size: 225/65 16C, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, sliding door, soot filter, Reference number for inquiries: 81098 Iveco Daily * Year of manufacture: New vehicle * ABS (Anti-lock Braking System) * ESP (Electronic Stability Program) * Power windows * Particle filter * Power steering * Immobilizer * Central locking * On-board computer * Airbag * Electric windows and mirrors * Remote central locking * AdBlue tank * Multifunction steering wheel * Cruise control Cedpfx Aioyrbq Te Sorh * Transmission type: Manual gearbox * Suspension: Leaf springs * Gross vehicle weight: 3,500 kg * Unladen weight: 3,425 kg * Payload: 75 kg * Permissible total weight: 3,500 kg * Tire condition front axle: 100% — Tire size: 225/65 R16C * Tire condition rear axle: 100% — Tire size: 225/65 R16C * Wheelbase: 3,750 mm * Tire size: 225/65 R16C * Oil & Steel Scorpion 18 * Basket and ground controls * Operating hours: 11 * Working height: 17.8 m * Platform height: 15.8 m * Platform capacity: 300 kg * Lateral outreach: 12.5 m * Work basket: 1,400 x 700 x 1,100 mm * Slew angle: 400° * Basket rotation: +/- 90° * Outriggers: electrohydraulic H-style supports; gross vehicle weight: 3,500 kg Liability disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast and hassle-free financing * Arrangement of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, signwriting, painting etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained staff — we will be happy to advise you.

Condition: good (used), Year of construction: 1993, Giardina oil laquer roller 2 roller Crjdpfxjz D I U Ej Ai Sjh 2 brush spreader

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 111, Ceetec IP250 industrial painting machine for painting, varnishing, oiling or lacquering of mouldings, claddings, deckings etc. Industry model, robust heavy duty machine for daily production. Maximum work piece cross section 100x250mm. Production speed up to 150 m/min. Credpfxewa D N Ne Ai Soh Including infeed and outfeed roller conveyors (manual). Very good condition. New price ca 30 000€

Condition: reconditioned (used), functionality: fully functional, operating pressure: 140 bar, empty load weight: 94 kg, input voltage: 230 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 558 C Eco HOT WATER PRESSURE WASHER NEW HEATING COIL The device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient single-phase motor ensures stable operation even during prolonged use. With operating parameters of 140 bar and 550 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model: HDS 558 C Eco Power supply (V): 230 Capacity (l/h): 290-550 Pressure (bar): 30-140 Max. temperature (°C): 80/155 Connected power (kW): 3.2 Fuel tank (l): 16 Fuel consumption (kg/h): 3 Weight (kg): 94 Dimensions (L x W x H) (mm): 940 x 600 x 740 EQUIPMENT: NEW HEATING COIL Cjdpjzgd Ezofx Ai Serh NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Built-in chemical tank allows for dosing of cleaning fluid directly through the machine Very clear and intuitive control panel Simple design and Good access to individual components under the housing makes the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, container length: 20 ft, color: blue, empty load weight: 29,000 kg, loading space width: 2,550 mm, loading space length: 6,000 mm, No. 8 - 20 ft FLAT CONTAINER with 3 recessed coil pockets, dimensions 6.050 m length x 2.550 m width Csdjx Akrtjpfx Ai Ssrh Internal anchor hooks and collars, 3 recessed sections for coil storage, Supports for pillars inside the coil pockets, Front and rear drop-down folding sides with folding mechanism, Fittings for intermodal transport Year: 2012

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Crsdpfxoun R Ufo Ai Soh Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,000 h, machine/vehicle number: 200011402, load capacity: 200 kg, lifting height: 14,000 mm, lifting power: 200 kg/m, overall weight: 1,650 kg, empty load weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 08/2026, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, color: white, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled, 14-meter tracked articulated boom lift for 200 kg and 120 kg loads, complete with electronic scale, available for sale! Csdpfszrf Saex Ai Ssrh Year of manufacture 2012 for €21,800 net, year of manufacture 2014 with white tracks for €22,900 net. Only 78 cm passage width and 1.95 m passage height! Two-person platform with 1.4 m width, which can be detached from the boom with 2 bolts. Power and optical compressed air connection available in the platform and can be used. Operation is possible with gasoline or 230 V electricity (almost silent), allowing work to be carried out on weekends. All functions (driving, outriggers, lifting, etc.) can be operated with electricity or gasoline. Good condition, white, non-marking tracks, all services performed, switching unit for 120/200 kg is new! Fully functional and ready for use! (Current TÜV inspection has expired). If desired, a current TÜV inspection can be arranged. For further questions, please call or send an email.

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, COMAT 1F14 DQ V1.4 LSX3 OIL FILTRATION SYSTEM TECHNICAL CHARACTERISTICS: Manufacturer: COMAT Model: 1F14 DQ V1.4 LSX3 Year of manufacture: 2011 Type: Cutting oil superfiltration system Fluid: Neat cutting oil Nominal flow rate: 180 [L/min] Filtration rating: 3 to 5 [μm] Filtration surface area: 4.4 [m²] Credpfx Ajz Hvv Nei Seh Filtration system: Filtration with filter aid Filter aid: Cellulose / mineral Compressed air pressure: 6 [bar] Power supply: 400 [V] Frequency: 50 [Hz] Auxiliary voltage: 24 [V] AC Maximum power: 5 [kW] Weight: 800 [kg] Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface Crsdpjzi D T Dofx Ai Sjh preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-scale, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss finishes. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical Data and Equipment • Large-area filtered supply air ceiling panel approximately 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction approximately 8,100 × 3,650 mm with grating • Supply air treatment approximately 24,500 m³/h • Exhaust air treatment approximately 24,000 m³/h Codpsz Ikyrjfx Ai Sjrh • Supply and exhaust air fans / air treatment • Existing heating/hot water technology with pumps and fittings • Air ducts and existing piping • Electrical system control / control panel • Cabin lighting • Sale includes the system as it currently exists on site Condition and Use Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface finishing, including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and Dismantling Conditions Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer is responsible for organizing the necessary skilled personnel as well as lifting, dismantling and transport equipment. The complete dismantling and removal must be completed by July 31, 2027, at the latest. Note: Technical data has been compiled based on available documents, nameplates and the current condition of the system. Information is provided without guarantee. The condition and scope determined during inspection shall prevail. Selling price: 31,500.00 EUR Price is net, any applicable statutory taxes and duties are excluded. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ Crjdpeyg H Erjfx Ai Sjh 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Crodpfx Aijz D Ifqs Seh Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Credpfx Aiozduple Sjh Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: like new (used), Year of construction: 2022, operating hours: 100 h, functionality: fully functional, OILING LINE FOR SOLID WOOD PANELS Csdpfsz D E Icox Ai Sorh

Condition: new, Year of construction: 2025, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Cjdpfxsyg H Dhs Ai Sjrh 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 440079, We offer this ready-to-use GSE Dispensing Colorsat Slim M20-WB paint mixing machine, manufactured in 2008. The unit currently has 12 dispensing stations connected, but it can be expanded to include an additional 8. We will also provide the user manual and operating instructions with the machine. The mixing machine features: Sandpiper pump module Network connectivity Pneumatic control Component circulation system Printer Dispensing valves Valve cleaning module Dispensing based on formulations Component dispensing Inventory management system We experienced an issue with the scale, which was resolved after replacing the power supply. During dispensing, the mixing machine occasionally fails to dispense the specified component, but only when dispensing in droplet mode. We can send a video demonstrating the machine's operation upon request. If you have any questions or require further information, please send a message or contact us by phone. Crsdjz Daukepfx Ai Ssh

Condition: used, functionality: unexamined, 3x KREMLIN Airmix paint spraying/material pumps – 1x Type 17A + 2x Type 20-15 – with accessories Description: For sale is a package consisting of three professional KREMLIN Airmix paint spraying/material pumps from a former paint shop. The units were used for professional painting applications and are mounted on mobile or stationary units with corresponding accessories. Scope of supply: 1x KREMLIN Airmix Type 17A - KREMLIN pneumatic Airmix pump - Type plate: 17A - Translation according to type plate: 10:1 - Serial No.: 72989 - with material container - Pressure regulator - Pressure gauge - Hose set - mobile base 2x KREMLIN Airmix Type 20-15 - Type: 20-15 Cjdjz Iuiqepfx Ai Ssrh - one unit with visible serial no. 06E 1581 - each with pressure regulators and pressure gauges - Material container - Material and air hoses - Accessories as shown in the pictures - mounted on mobile units/cabinets The units have not been in operation for a longer period. A current functional test has not been carried out. Due to the prolonged period of inactivity, an inspection, cleaning, and possibly an overhaul of the pumps, seals, and valves should be performed before recommissioning. The units are therefore explicitly offered in their current condition and without testing. Technical documentation is still available for the KREMLIN 20-15; specific spare parts and repair parts such as repair kits and coupling parts are also still offered. Therefore, in addition to recommissioning, the pumps can also be used as a source of spare parts or as a spare parts package for existing KREMLIN Airmix systems. Location: 3608 Thun, Switzerland Availability: immediate Inspection: possible by appointment Sale: preferably as a complete package The sale is ex works, in the current condition, without warranty or guarantee. Subject to prior sale. Selling price: 1,450.00 EUR Price net, any applicable statutory taxes and duties are not included. Export, customs clearance and import duties are the responsibility of the buyer.

Condition: excellent (used), Year of construction: 2016, operating hours: 10,000 h, functionality: fully functional, Complete painting system comprising two Cefla Flexispray spraying units and three Cross Oven drying ovens. The system was purchased new in 2016 and is customized for painting softwood interior door frames for the Dutch market. The system includes the following units: Cefla Cross Oven #1 Width 320 cm, length 300 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cefla Flexispray coating machine #1 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #2 Width 320 cm, length 390 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. Cedpoz Hbm Tefx Ai Serh Cefla Flexispray coating machine #2 Compact linear spray machine, perfect for applying water or solvent-based stains and paints to mouldings, narrow boards or dismantled window sections up to 240 mm wide. It has a roller and belt conveyor system and is equipped with up to 6 spray guns, subdivided into 2 product circuits. Spray guns and pump not included. Cefla Cross Oven #3 Width 570 cm, length 700 cm Transversal oven able to perform the drying and/or flash-off of water or solvent-based paints applied to mouldings and narrow boards, in a single process. The oven's well-insulated structure, with integrated fans, means low heat loss and impressive energy saving. The painting system is installed at the factory and is available for a test run. The system is sold "as-is," and its dismantling, relocation, and transport are the buyer's responsibility. Sales price for the system is 120.000 EUR VAT 0% and is negotiable. If there are several buyers, we reserve rights to sell the system to the highest bidder.

Condition: excellent (used), Year of construction: 2011, 348 USED Heuft thermal oil ovens. Year of manufacture (deck oven): 2009 Year of manufacture (rack oven): 2011 EQUIPMENT: - 1 Heuft rack oven, model VTR 10.12.5.09, for 60x100 cm trays - 1 Heuft deck oven, model VT0 216 33, with a baking area of ​​15 m² (oven features temperature zoning for 3+3 decks) - HK 200 heating boiler Cedpfxszxp Dys Ai Ssrh - Trolleys for rack ovens The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. Crjdpfx Aiez Azx Ro Soh The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.