Vertical machining center

Matsuura MAM72-25V

Year of construction: 2011, condition: excellent (used), 5 axes machining center FANUC G-Tech 30i Working travels 550x410x450mm B-Axis table +/- 110° A-Axis table 360° Spindle taper BT40 Big Plus Spindle speeds -15000 rpm Tool changer 40 pos Palett places 2x Durchmesser 250mm Coolant through spindle 3D measuring probe Tool measuring device Paletts no 15 Tool holders approx 80x KNOLL / TURBO coolant device Tjdpfxegufmrj Ac Njf MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,00,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach Tsdpfxsxwm Ads Ac Nef 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: ready for operation (used), Year of construction: 2006, operating hours: 19,911 h, General Data Measurements width 1500 mm Measurements depth 2200 mm Measurements height 2250 mm Control Unit Brand FANUC Model 30 iM Main Drive Spindle speed range 50-15000 min Tool taper BT40 Media Chip conveyor Yes Additional Equipment Tool changer with 40 stations (chain) Pallet changer for 2 pallets, 130 mm diameter Replacement pallets Capto C6 KNOLL coolant system with coolant supply through the spindle and pump KTS25-50T / Coolant shower with a capacity of 100 l/min at 1.4 bar 2 spiral chip conveyors Tsdpexgkddsfx Ac Nof Renishaw measuring probe OMP60 / Renishaw laser system TRS-1 Rotating viewing window, electric / For the control: programmable mirror, coordinate system rotation, IZ2/150NF HSC precision control for simultaneous 5-axis machining CE mark This 5-axis Matsuura MAM72-25V was manufactured in 2006. Ideal for complex and precise machining tasks, this vertical machining center offers enhanced flexibility and productivity for your manufacturing needs. Consider the opportunity to buy this Matsuura MAM72-25V vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Todowx Iugjpfx Ac Njf Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: ready for operation (used), Year of construction: 2006, A CNC 5-axis vertical machining center Matsuura is available. Travel X/Y/Z: 550mm/440mm/580mm, spindle mount: BT40, speed: 15000rpm, tool positions: 40, pallet changer: 2-fold, diameter: 130mm. Machine dimensions X/Y/Z: approx. 2900mm/2550mm/3000mm, weight: approx. 6000kg, control: Matsuura G-Tech 30i, machine running time: approx. 19911h. Including 2x additional pallets and cooling lubricant system Knoll. Documentation available. On-site inspection is possible. Tedpfx Acowyxavo Nef

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 5-Axis Vertical Machining Center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours Control System MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining Travel X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis: +110° to -110° C-axis: 360° Max. workpiece size: Ø250 x height 250 mm Max. table load: 40 kg Table indexing B- and C-axes: 0.001° Pallet size: Ø130 mm Max. workpiece size: Ø250 x height 250 mm Max. pallet capacity: 40 kg Tedpfowwk Dzsx Ac Njf Pallet interface: Capto C6 Spindle Speed range (standard): 50 – 15,000 rpm Spindle taper with face contact: BT 40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5/5.5 kW Max. torque: 65.1 Nm up to 1,100 rpm Rapid Traverse and Positioning Speeds Rapids: Rapid traverse X, Y, Z axes: 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Feeds: X, Y, and Z axes: 1 - 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations filled): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guides Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws Ball screw diameter X, Y, and Z axes: Ø36 mm Pitch: 16 mm Axis Drives Power X, Y, Z axis: 4.5/4.5/5.5 kW Power B and C axis: 4.5/2.5 kW Axial force X, Y, Z axis: kN Space Requirements* (standard machine) Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm *Dimensions may differ for this particular machine! Machine Weight Standard machine: 7,800 kg Machine with PC-2: 8,600 kg Connections Total connected load: Standard machine: 32 kVA Machine with PC-2: kVA Connection voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar 5-axis simultaneous control Expandability of tool magazine capacity from standard 30 to 40 tool positions Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, supplied with sealing air Coolant Systems KNOLL cooling system, consisting of*: - 1 hinged belt or scraper chip conveyor with lift pump and chip removal to the operator side (Type: 500 K-1/10, year of manufacture 2010) - 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-switchable stages - 1 external cooling with coolant pump, output 100 l/min at 1.4 bar - 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar - 1 compact filter KF200, filter capacity 200 l/min - 2 spiral chip conveyors in the machine, standard option Measuring in the Machine - RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, can be loaded into the spindle via tool changer - OMRON pressure gauge for tool length measurement and tool breakage monitoring Modifications and errors in technical specifications and information, as well as prior sale, are subject to change!