Other

MERCEDES-BENZ 1019 4x4 Tanklöschfahrzeug Metz TLF 16

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 Gksdpfx Ahsim Si Aj Djf We can offer you this robot overhauled too!

Condition: new, functionality: fully functional, power: 139.74 kW (189.99 HP), fuel type: diesel, axle configuration: 4x4, operation weight: 5,500 kg, Year of construction: 2025, Equipment: ABS, air conditioning, airbag, all wheel drive, differential lock, From our immediately available new vehicle stock, we offer you: TSF-W / MLF Mercedes Sprinter 519 4x4 with single tires Are you looking for a compact, off-road capable portable pump vehicle/small fire engine with a generous water supply, which can be operated with the fire department license or a driving license up to 7.5 tons? Then we have your solution! Chassis: • MB Sprinter 519 4x4 Euro 6 with manual transmission • Single tires with track-matching for superior off-road performance • Comprehensive standard equipment • Vehicle height only 2.62 m Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Body: • High-quality frame construction made from rust- and corrosion-resistant materials • Folding steps for every side equipment compartment • Customizable stainless steel equipment mounts, tailored to your requirements • Walkable, non-slip vehicle roof Fire pump / extinguishing agent tank: • High-pressure extinguishing unit with foam proportioning system • 1,000 l water tank with integrated 100 l foam agent tank Firefighting technology: • High-pressure quick attack with 50 m rigid hose Safety and lighting: Godpexfv R Hjfx Ah Djkf • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system • 100 W PA system with announcement unit • Rear-view camera • Extensive LED lighting in the crew and all equipment compartments • LED scene lighting on the body and auxiliary headlights • Pneumatic LED light mast with remote control • Winch available upon request • Hygiene board available upon request All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!

Condition: new, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m - galvanized ramp grating - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators - The ramp is also equipped with a reel Gkjdpfx Ahowa Smpj Dsf ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,000 mm, total height: 2,200 mm, total length: 3,550 mm, height adjustment type: electric, table height adjustment: 500 mm, workpiece weight (max.): 80 kg, grinding belt length: 7,000 mm, grinding length: 1,500 mm, grinding belt width: 150 mm, overall weight: 870 kg, extraction connection diameter: 180 mm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, type of input current: three-phase, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), input voltage: 400 V, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration - CE version Gkjdpjtwb U Aefx Ah Dof The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: used, functionality: fully functional, mileage: 65,000 km, power: 176.52 kW (240.00 HP), fuel type: diesel, Year of construction: 1996, FIRE ENGINE (CREW VEHICLE) MLF MAN 10.224: Year of manufacture: 1996 Crew: 9 Water tank: 1,200 litres Foam tank: 120 litres Pump: 1,600L/min at 8 Bar Turbo foam proportioner ZR 400 Extinguishing water tank with 1,200 litres and 120 litres of foam Rapid intervention hose reel Three equipment compartments on each side of the vehicle. All information provided to the best of our knowledge and belief, without guarantee of completeness or accuracy. This advertisement is for informational purposes only and does not constitute an offer. Subject to prior sale! Gkodpjw U Dffofx Ah Djf

Condition: used, functionality: fully functional, mileage: 55,000 km, power: 170.64 kW (232.01 HP), first registration: 12/1991, overall weight: 14,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, fuel: diesel, gearing type: mechanical, Year of construction: 1991, Equipment: all wheel drive, parking heater, From our immediately available used vehicle inventory, we offer you: Fire engine LF 16/12 4x4 all-wheel drive, 1,600 l water tank, on MAN 14.232 chassis General information: • Year of manufacture: 1991, first registration: 12/1991 • Mileage: approx. 55,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.232, 4x4 all-wheel drive, 232 HP Gkodexflnhopfx Ah Def • Diesel engine with manual gearbox and power steering • Towing hitch Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Mountings for 2 self-contained breathing apparatus facing against the direction of travel • Mountings for 2 self-contained breathing apparatus facing the direction of travel • Auxiliary heater Bodywork: • Built by Ziegler • LF 16/12 superstructure according to DIN standard • Two spacious side equipment lockers per side • Fold-out steps for side equipment compartments • Mountings for standard equipment • Hose reel carriage fitment • Storage racks for extension and sliding ladders on the roof Firefighting pump/extinguishing agent tank: • Ziegler FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 1,600 l • Foam agent tank 400 l Firefighting equipment: • Rigid rapid intervention line (top, G6) • Roof monitor • Built-in foam inductor Safety and lighting: • 2 blue revolving warning beacons • Siren system • Crew and locker compartment lighting • Surround lighting • Auxiliary spotlights • Rear view camera • Rear warning system • Light mast 2 x 1000 Watts (operated by generator) • Hygiene board available on request We would be pleased to make you a detailed offer and give you a full presentation of the vehicle at our premises in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. Gkedpfx Ahjfzq Sts Dsf The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Condition: used, mileage: 20,000 km, power: 188 kW (255.61 HP), first registration: 02/1979, overall weight: 14,300 kg, fuel type: diesel, color: black, axle configuration: 2 axles, gearing type: mechanical, Year of construction: 1979, Equipment: all wheel drive, Manufacturer MAN Model 5 To KAT MIL 4x4 Year 1979 Condition Good Serial Number 4510642 Ref. nr. 1407968 Reg. date: Engine: V8 Hk: 255 Km: 20000 Gearbox: Manual, Converter Diesel tank: 1 Tank liter: 350 Rear view camera: ? Gkodpexb In Njfx Ah Djf Drum brake: ? Tire Size: 14.00R20 Cover% left 40 - 40% Front suspension: Springs Suspension rear: Springs Toolbox: ? Total weight: 14300 kg. Net weight: 8920 kg.

Condition: good (used), mileage: 2,24,116 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,400 mm, first registration: 05/2017, loading space length: 2,470 mm, loading space width: 1,430 mm, loading space height: 1,360 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: other, tire size: 275/40R20, number of seats: 3, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, parking heater, traction control, trailer coupling, = Additional Options and Equipment = - Electric windows - Electric mirrors - Tinted windows - Alloy wheels - Standard - Partition wall = Remarks = Configuration: 4x2, Payload: 920 kg, Kerb weight: 1,880 kg, Gross weight: 2,800 kg, Unbraked towing capacity: 750 kg, Braked towing capacity (central axle): 2,500 kg, Towbar, Alloy wheels, Cab type: Single cab, Cruise control, Air conditioning, Number of airbags: 1, Auxiliary heater, Parking aid: None, Tinted windows, Electric windows, Electric mirrors, Partition wall, Radio/Cassette, Colour: White, Metallic, Heated mirrors, Lighting type: Xenon lamp, Speed limiter, Lane keep assist, Bluetooth, Warning lights, Engine power: 110 kW (148 HP), Fuel type: Diesel, Emission standard: Euro 6, Drive technology: Timing belt, Transmission type: Manual, Speed limiter, Number of gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Roof rack: Standard, Sliding roof, Side doors: 1, Rear closure: Double door, Workshop equipment, Central locking, Seating: 3, Seat configuration: 1+2, Seat material: Fabric, Seat adjustment: Manual, L2H1 Airco 150Hp EDITION Alloy wheels Towbar Bumpers-Coloured NAP!, Spare wheel, Spare wheel tread: 4 %, Tyre type: Winter tyres = Further Information = General Information Number of doors: 1 Registration number: V-891-FX Transmission Transmission: 6-speed manual gearbox Axle Configuration Tyre size: 275/40R20 Brakes: Disc brakes Axle 1: Tyre tread left: 5 mm; Tyre tread right: 6 mm; Suspension: Coil spring Axle 2: Tyre tread left: 1 mm; Tyre tread right: 1 mm; Suspension: Leaf spring Gjdpfx Asxpm D Seh Djkf Dimensions Dimensions (L x W x H): 540 x 190 x 205 cm Weights Unladen weight: 1,880 kg Payload: 920 kg Gross vehicle weight: 2,800 kg Functional Loading platform height: 63 cm Sliding roof: Yes Condition Technical condition: Good Optical condition: Good Damages: None Number of keys: 2

Condition: used, mileage: 1,02,180 km, power: 78 kW (106.05 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, overall weight: 3,500 kg, empty load weight: 2,535 kg, maximum load weight: 965 kg, first registration: 10/2010, loading space length: 4,300 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, emission class: euro4, color: yellow, driver cabin: other, suspension: other, number of seats: 1, Year of construction: 2010, total length: 7,130 mm, construction height: 2,800 mm, fuel: diesel, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C is a used box van, first registered in October 2010, with a mileage of 102,180 km. Powered by a 2,287 cc diesel engine delivering 78 kW (106 HP), it meets Euro 4 emissions standards. The vehicle is equipped with an automatic transmission and has a maximum payload capacity of 3,500 kg. Its dimensions are 2,800 mm in height, 2,090 mm in width, and 7,130 mm in length, offering ample space for a variety of transport tasks. Gkedjxmbf Sepfx Ah Def This yellow van comes with a green emissions sticker (category 4) and is valid for technical inspection (TÜV) until October 2024. It is particularly suitable for commercial use, as it features practical shelving and a reversing camera for easier operation. The Iveco Daily also offers a walkthrough option, providing flexible access to the cargo area. Viewing is possible at the Rohrbach (Pfalz) location without prior appointment. Sale is subject to errors and prior sale. Sale is for business customers only (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.