Unimog

Mercedes-Benz Unimog U 219 mit Jotha Aufbau

Condition: used, machine/vehicle number: 5737, Year of construction: 1991, operating hours: 6,587 h, Erstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Dksdpfszcbngex Ap Deu Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle AngabenErstzulassung Gesamtgewicht: 7.490 kg Antrieb: Diesel 4x4 Antrieb über 6 Zylinder Mercedes Dieselmotor mit 92 KW / 125 PS, Hubraum 5957 cm³ 16 Gang-Schaltgetriebe Fahrerkabine mit 3 Sitzen Reifengröße 365/80 R 20, Profil 14-16 mm, Radstand 3300 mm Gesamtmaße (L x B x H) 5500 x 2265 x 3400 mm Leergewicht 6.960 kg Achslast vorn 4400 kg, Achslast hinten 4400 kg. ABS, Radio, Differenzialsperre, Servolenkung, Anlegekeile Kran HIAB 050 mit Kabelfernbedienung 3 Seiten Kipper ohne Funktion durch Ablastung, 230 x 210 x 45 cm Stahl Bordwände Maulkupplung 40 mm, 2 x Bergetüre hinten, Winde, Hydraulik vorn und hinten, Getriebe ist beschädigt, fährt nur in kleiner Gruppe, Armaturenbrett beschädigt, Rostschäden in Fahrerkabine siehe Bilder. Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: good (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, Numerically controlled machining center Dksdpfx Ajr E D Easp Deu max. panel sizes: 4,000 x 2,300 mm 1 Kuka KR420R3300 robot 1 Kuka KR200L140 robot 1 Kuka KRL140-3Comp robot Conveyor belt for removing the scrap metal Suction Ruwac Zone 22

Condition: like new (used), Year of construction: 2018, machine/vehicle number: 22-7254, functionality: fully functional, operating hours: 30 h, power: 2.2 kW (2.99 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,010 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 3,500 mm, workpiece width (max.): 2,200 mm, workpiece weight (max.): 300 kg, number of axes: 3, number of slots in tool magazine: 1, controller manufacturer: Kinetic-NC, actuation type: electric, total height: 1,900 mm, total length: 3,700 mm, total width: 2,700 mm, overall weight: 1,200 kg, table length: 3,500 mm, table width: 2,200 mm, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, CNC-Step RaptorX-SL 3200/S20 gantry CNC router (2018) – approx. 30 operating hours, production-ready Immediately available CNC gantry router from CNC-Step, built 2018, in as-new condition. The non-resettable hour meter reads only ~30 hours – the machine is practically unused and shows no wear. Originally commissioned by CNC-Step (OEM). Largest standard model of the RaptorX-SL range: travel 3200 × 2010 × 300 mm, clamping area approx. 3.5 × 2.2 m, variable bridge height 150/300/400 mm. Heavy steel frame, Hiwin/Bosch Rexroth linear guides, planetary-geared drive with Benezan BEAST stages – rigidity and repeatability for professional continuous use (furniture/interior fit-out, sign-making, model/prototype work, composites). Fully production-ready, incl.: • Teknomotor Ceramic spindle 2.2 kW (18,000–24,000 rpm, ER25, air-cooled) • KinetiC-NC control with unlimited full-version license (transferable) • Vectric VCarve Pro license • PC, monitor, handheld pendant • Extensive tooling package (ER25 collets Ø2–15 mm, solid-carbide cutters, Ø60 Tornado face mill) • 400 V three-phase connection Technical data: • Travel X/Y/Z: 3200 × 2010 × 300 mm • Spindle: Teknomotor Ceramic 2.2 kW, 18,000–24,000 rpm, ER25, air-cooled • VFD: Toshiba VF-nC3 • Drive: stepper motors + planetary gearing, 4× Benezan BEAST • Guides: Hiwin / Bosch Rexroth 20 mm • Control: KinetiC-NC (CncPod, Ethernet) Djdezfv T Ijpfx Ap Dsku • Power: 400 V three-phase (CEE) · Weight: approx. 1,160 kg • Serial number: 22-7254 Original 2017 invoice available (buyer data anonymized). Base-machine list price: €28,198 net (€33,555.62 incl. German VAT) – excluding spindle and VCarve license. Here fully equipped for a fraction of that. Live demonstration under power by appointment. Collection, dismantling and transport by arrangement. Location: Oploo (NL). Price: €17,000 net (excl. VAT)

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor Dodjzk Npgepfx Ap Djku - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: excellent (used), Collet chuck Dkedpfelwqc Ejx Ap Dou Collet chuck SK 40 DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Single delivery 15 Euro

Condition: used, machine/vehicle number: 008562, X axis working area: 2465 mm Y axis working area: 1260 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 16 Dkedpfxjzvwilj Ap Dju

Condition: used, Year of construction: 2021, CNC machining center with a fixed worktable, double-sided driven gantry, and a 5-axis milling spindle with continuous interpolation. Machine for processing solid wood, wood-based materials, and various plastics. Base machine and gantry Machine base and gantry made of a ribbed, welded steel construction, offering very high rigidity. Guidance system and drives Gantry movement of the X and Y axes with rack and pinion and servo drive. DUAL GANTRY MOTORIZATION: Drive of the X-axis with two synchronized servo drive motors. Movement of the Z-axis via ball screw with servo drive. Dust-protected linear guide. Safety system Three-part safety floor mats allow for the placement of workpieces in the non-active area. Moving partial enclosure with a Lexan protective window for the machining units. Central lubrication Automatic central lubrication Vacuum system Vacuum system for pendulum machining with constant suction power in both work areas. Machine operation The machine is equipped with a cable-guided remote control for performing basic functions. Electrical equipment Dust-protected control cabinet (CE) according to IP 55 standard, including an air conditioning unit and a mobile control panel. Machine control OSAI Open Numerical Control 5-axis swivel head Z 700 Movement of the C-axis and B-axis via brushless servo drives - Maximum rotational speed: 750 /2 sec. - Rotation C-axis: Swivel axis: +/- 110 Technical data - max. travel speed X-axis: 60 m/min - max. travel speed Y-axis: 60 m/min - max. travel speed Z-axis: 24 m/min - Vector speed: 80 m/min - max. workpiece height: 500 mm - Machining area: 4210 x 1605 mm (Extended working area) - Compressed air supply: 7 bar - Suction power: min. 2200 m3/h - Suction speed: min. 28 m/s - Suction nozzle: 160 mm Work table Comec Designed Phenolic resin table, designed as a grid table, grid dimension 50 x 50 mm, for accommodating Cosmec suction systems and templates. The work table is divided into two work areas. Threaded holes in the table to mechanically fix workpieces, 3 pcs. retractable stops Vacuum pump Vacuum pump 250/300 m3/h (50/60 Hz), power: 5.5 kW Main spindle 5-axis spindle: 18 kW main spindle, liquid cooling, tool interface HSK 63 F - 15 kW in S1 operation - 18 kW in S6 operation - Ceramic bearings - Direction of rotation: left/right - Spindle speed: 500 - 24000 rpm Extraction hood Extraction hood controlled via NC program, adjustable in height. Dedpszux H Asfx Ap Doku 2 x Tool changer Moving 12-position tool changer for tool interface HSK 63 F - max. tool diameter 150 mm, if adjacent position is free - max. tool diameter 120 mm, if adjacent position is occupied - max. tool weight: 6 kg - max. weight of tool and holder: 40 kg Tool length measurement Station for automatic length measurement of the tool Note: Current status of the 5-axis simultaneous machining software through a maintenance contract.

Condition: used, Year of construction: 2006, operating hours: 1,363 h, functionality: fully functional, power: 15.45 kW (21.01 HP), fuel type: diesel, color: green, axle configuration: 2 axles, fuel: diesel, driver cabin: day cab, Equipment: all wheel drive, car registration, Park Ranger 2100 Used Egholm 2100 All-wheel drive, 21 hp diesel engine 2-cylinder steering system, Version 2 Cab 2100 Cruise control Lighting and mirrors for cab and compliance with German Road Traffic Licensing Regulations (STVZO) Type approval certificate (ABE) Three-way valve with automatic switching Djdpfozdtxlox Ap Doku Ball/drawbar coupling Socket, 7-pin Independent brush speed Doors with sliding windows Handheld suction hose for sweeping and suction container FST 400 Front sweeper Subject to changes, printing errors, and prior sale. All information is provided without guarantee. The sale is made excluding any warranty or guarantee.

Condition: good (used), functionality: fully functional, mileage: 1,88,000 km, power: 110.32 kW (149.99 HP), first registration: 03/2009, fuel type: diesel, axle configuration: 3 axles, color: blue, gearing type: automatic, suspension: parabolic leaf (spring), number of seats: 9, Year of construction: 2009, Equipment: ABS, air conditioning, airbag, car registration, central locking, disability-friendly, parking sensors, power assisted steering, soot filter, summer tires, traction control, winter tires, Good day, thank you for your interest in our Sprinter. First registration: 03/06/2009 Mileage: 188,000 km Horsepower: 150 hp Transmission: Automatic Dedpfoztw Dwex Ap Doku Seats: 9 (8 + 1 wheelchair) Wheels: Summer steel rims 70% / Winter steel rims 60% Service: Recently serviced and fully maintained according to service schedule Accident: No Repainted: Yes VAT: Not applicable The Sprinter was used by Lebenshilfe and is in good technical and visual condition for its age and mileage. The Sprinter has received all its services at a specialist workshop and has a complete and up-to-date service record. It has two three-seater benches in the second and third rows and two individual seats in the front. In addition, it is equipped with an Apner Maschinenbau wheelchair lift with roll-off protection at the front and rear. The lift has a lifting capacity of 400 kg. The Sprinter is equipped with eight wheels, each mounted on a steel rim.

Condition: used, Year of construction: 2014, operating hours: 5,609 h, functionality: fully functional, power: 74 kW (100.61 HP), first registration: 07/2014, overall weight: 5,000 kg, fuel type: diesel, color: white, axle configuration: 4x4, operation weight: 2,710 kg, empty load weight: 2,710 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, suspension: steel, Equipment: ABS, additional headlights, air conditioning, all wheel drive, differential lock, hydraulics, low noise, Sweeper vehicle: Dkjdpfx Ajxwautsp Deu + Multicar + Tremo X56 + Registration date: 07/01/2014 + Total hours: 5,609; operating hours: 4,858; pump hours: 3,122 + 4-cylinder VW diesel engine, 2.0l; Euro 5, 74kW + Hydrostatic transmission with working gear (max. speed 25 km/h) + Optional all-wheel steering + All-wheel drive + Differential lock + Warning light + Additional headlights + Rearview camera + Rear warning system + Air conditioning + Radio/CD + Front hydraulics with potentiometer + Rear hydraulics + Idle speed increase CMAR superstructure: + Telescopic sweeping beam with side nozzles + 2 m³ water tank + Medium-pressure pump 65 bar + High-pressure cleaner at the rear + Floor cleaner CC600m at the rear + 4540mm x 1340mm x 2050mm (l x w x h) + Unladen weight: 2,710 kg; permissible total weight: 5,000 kg Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!