Pallet rack Meta, 40 running meters

Meta

Condition: used, Year of construction: 2007, RA1784 Pallet rack system Galler OMEGA used 16600 x 5400 x 1350 mm Installation in a hall Shelf height: 5.400 mm shelf depth: 1.350 mm clear field width: 3.200 mm stored goods: pallets with stored goods Deep storage: 1,350 mm Storage arrangement: 1. stored goods on the floor 2. to 5 stored goods on pairs of tie bars, Shelf load on pair of spars at daylight Field width of 3.200 mm and : 2.100 kg shelf height 1.500 mm Field load: 8.4 to. at 1,500 mm buckling length (min. 4 fields) →Alle Loads are understood to be with evenly distributed load. Painting: Upright frame: Sendzimier galvanized Support beam: RAL 7035 light grey WITH RUST SPOTS (SUPERFICIAL) Installation: 1 pc. one-sided shelf axis, standing on a hall wall 5 x 3,300 + 100 = total length 16,600 mm consisting of: 6 pcs. stand frame Galler Omega screwed 5.400 x 1350 mm 40 pcs. carrier beam Galler Sigma 3.200 mm 80 pcs. safety pins Iodek Abbbepfx Ab Isa Price net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Würzburg Optional if required 2 pcs. ram protection corner used At the beginning or end and at passages to protect the shelf stem For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), 10,000 pieces Inserted gratings Gratings for pallet racks galvanized Inlay grids in different sizes, mesh sizes, load-bearing bar and weight load available: Negotiation price: from € 15,-- net per m² from stock Larger quantities on request! Iodjdhhukjpfx Ab Isa Insertion grid Mesh width Load bearing bar Load bearing bar direction 100.5 x 98.5 cm 7 x 3.5 cm 35 x 2.5 mm 100.5 cm 120 x 89.5 cm 7 x 3.5 cm 30 x 2.5 mm 120 cm 118 x 109 cm 7 x 4.5 cm 45 x 2.5 mm 118 cm 133 x 99 cm 3 x 3 cm 30 x 2 mm 99,5 cm 134 x 75 cm 7 x 7 cm 25 x 3 mm 75 cm 134 x 76.5 cm 2.5 x 2.5 cm 20 x 2 mm 75 cm 134 x 92 cm 6.5 x 6.5 cm 30 x 2 mm 92 cm 134.5 x 99.5 cm 7 x 7 cm 30 x 2 mm 99.5 cm 143.5 x 124 cm 7 x 4.5 cm 35 x 2 mm 124 cm Second-hand, very good condition, see pictures. Goods are in stock. Transportation possible on request. Visits possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Changes and errors in the technical data, information and prices and subject to prior sale! See our AGB, all prices excl. VAT from stock) Purchase / Sale We are constantly looking for and offering numerous articles from various areas clean-swept premises Liquidations Quick

Condition: good (used), Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, chuck outer diameter: 250 mm, feed length X-axis: 680 mm, feed length Z-axis: 200 mm, power: 39 kW (53.03 HP), rapid traverse X-axis: 45 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, controller manufacturer: Siemens, controller model: 840 DS, input voltage: 400 V, coolant supply: 6 bar, nominal power (apparent): 45 kVA, Equipment: rotational speed infinitely variable, type plate available, EMAG VERTICAL SINGLE-SPINDLE TURNING AND GRINDING CENTER Iodpfxslfduis Ab Ioa EMAG - REINECKER VSC 250 DS Used, year of manufacture 2015 Control: Siemens 840 DS Condition: Used machine in good condition Operating hours (approx.): 35,000 Program run time (approx.): 22,000 hours Operating voltage: 400V Air connection: 6 bar Total power requirement: approx. 45 kVA Cooling unit: water/water Machine dimensions without peripherals (L x W x H): approx. 3200 x 1900 x 2650 mm CYLINDRICAL GRINDING Integrated motor grinding spindle with max. speed 45,000 rpm and max. output 18 kW Touch dressing for ceramic CBN grinding wheels Vertical CNC turning and grinding center Automation / Gantry: EKF basket stacker cell as raw/finished parts buffer for baskets 400 x 600 mm on floor rollers 3 basket stacks enable uninterrupted operation even during basket changes, loading/unloading via loading gantry The machine is well-maintained and EMAG serviced. The production process includes pre- and finish machining of the bore and end faces by hard turning the face surfaces, as well as turning the diameter/bore followed by bore grinding. No driven tools Viewing under power is possible by appointment. Dismantling and loading of the equipment are to be carried out by the buyer. Price and further details on request / special price All technical details subject to error/typos. Sale only within EU countries.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 73965, Technical specifications: • Manufacturer: Rösler Oberflächentechnik GmbH (Germany) • Model: Centrifuge Z 1000 • Year of manufacture: 2016 • Motor power: 11.0 kW • Power supply: 400 V / 50 Hz • Maximum speed: 2,650 rpm • Maximum load: 65 kg • Maximum throughput: 1,000 l/h • Maximum liquid temperature: 40 °C • Maximum charge material temperature: 50 °C Isdpfxjw Rc Ane Ab Iea • Drum inner diameter: 500 mm • Machine weight: 1,200 kg • Serial number: 73965 New cutting blades, seals, and centrifuge bearings. Fresh water tank 1x 2,000L and waste water tank 1x 2,000L and sludge trolley. Automatic process water refill.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 30,000 mm, total height: 4,300 mm, total width: 6,500 mm, workpiece weight (max.): 100 kg, temperature: 220 °C, heating capacity: 80 kW (108.77 HP), workpiece height (max.): 1,200 mm, workpiece length (max.): 2,500 mm, insulation material: Mineralwolle 75 kg/m³, insulation thickness: 150 mm, workpiece width (max.): 800 mm, The continuous system consists of the following components: Chemical pre-treatment by spraying Dryer Powder coating system Powder curing oven Conveying technology (cycle process) Ijdpjum Ufljfx Ab Ija Electrical control system

Year of construction: 2016, condition: like new (used), Offered is a vertical turning-grinding center VLC 100 GT, with the retrofit construction year 2022. With the pick-up spindle unit, workpieces can be fed directly from the transport conveyor belt to the working area. Due to its modular design, the VLC 100 can be configured for a wide range of applications. The pictures show an example of a combination of turning tools (block steel holders) and grinding spindles for soft or hard machining (inside, outside). Depending on the workpiece or technology, these machining modules can be easily adapted. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: max. 100 mm Workpiece height: max. 150 mm X-stroke: 605 mm Z-stroke: 530 mm POWER main spindle 18 kW grinding spindle 12 kW TOOL CARRIER Iodpfxoh Tm Duj Ab Ija 2x block steel holder VDI / Capto console with grinding spindle 12 kW, 60000 1/min Price, delivery time and equipment of the machine according to agreement.

Condition: refurbished (used), Year of construction: 2012, Offered is a vertical turning and grinding center EMAG VSC 250 DS. The machine will be mechanically overhauled and rebuilt by EMAG. Depending on requirements, the machine can be equipped with various automation options (shuttle, O-type conveyor, L-type conveyor, turn around station) and other peripherals such as chip conveyors, coolant systems, etc. CONTROL Siemens 840Dsl TECHNICAL DATA Workpiece diameter: 250 mm Workpiece height: 100 mm X-stroke: 860 mm Z-stroke: 200 mm MAIN SPINDLE Iodpoh Tkdqefx Ab Isa power 28 kW TOOL CARRIER EMAG wheel turret, 12x VDI 40 console with grinding spindle 18 kW, 45000 1/min Delivery time and additional equipment of the machine on request.

Condition: excellent (used), Dexion p90 pallet warehouse racks. Racks in very good condition. We have about 30,000 pallet spaces in our offer. Frames in heights of 6000/1100 - 98 euro 7000/1100 - 115 euro 8000/1100 - 130 euro 9000/1100 - 147 euro Traverse BX 120/40/13/2700 2400kg 17 euro pcs Traverse BX 100/50/15/2700 2850kg 18 euro pcs Traverse BX 60/40/13/2700 900kg 14 euro pcs Ijdpshq Dd Tjfx Ab Ioa We issue invoices. I invite you to cooperate

Condition: used, 650 St. Werit IBC Container – 1060L Used Tank 🧰 Product features: • Condition: Very good – washed / unwashed • Material: PE-HD (high-molecular polyethylene), UV-stabilized • Color: Transparent / natural • Dimensions: 1200 × 1000 × 1163 mm • Nominal volume: 1060 l • Weight: 54.6 kg • Opening: NW 225 with S240 x 12 thread (various versions available) • Discharge valve: Removable NW 50 with S60x6 thread • Outer container: Steel frame made of tubular steel, galvanized (see photos) 💰 Price: €50 net, excl. VAT (unwashed) Iodpfsw E H Aijx Ab Ioa • Quantity discount: on request • Shipping costs: Throughout Europe on request • Delivery time: Immediately available • Inspection and collection: Possible by appointment at any time Constantly over 5,000 linear meters of pallet racking from various manufacturers in stock (Subject to technical changes, errors, and prior sale. Please see our General Terms and Conditions. All prices excl. VAT, ex stock.)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: diverse, travel distance X-axis: 700 mm, travel distance Z-axis: 375 mm, rapid traverse X-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, mount diameter: 30 mm, turning diameter: 100 mm, chuck outer diameter: 160 mm, turning height: 150 mm, Equipment: documentation/manual, type plate available, Linked EMAG machining line for spur gears / planetary gears / gears. Highly productive manufacturing line for planetary gears, including integrated automation with raw part storage, marking unit, basket stacking cell for finished parts, and a complete dry-production process. Comprising: - 1x EMAG raw part storage (stacker) - 2x EMAG vertical single-spindle turning centers VLC 100 (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical hobbing machine VLC 200 H (Siemens 840 Dsl) - 1x EMAG-KOEPFER vertical chamfering machine VLC 100 C, press deburring (Siemens 840 Dsl) - 1x EMAG "TRACKMOTION" internal automation with two carriages (Translift) and dedicated control system, operated via mobile HT8 handheld, for component feeding and transport in the automation aisle between stations (with integrated turning unit) and part removal - O-band automation for up to 24 pallets at each EMAG machining station, enabling optional independent automated operation for each machine Iedpfxok Aacae Ab Ija - 1x part marking station (MARKATOR scribe marker) - 1x EKF automation (gantry) for part handling between EMAG TRACKMOTION, marking station, and stacking cell - 1x EKF basket stacking cell as finished part buffer with 3 basket stacks, uninterrupted operation even during basket stack changes Turning centers with 12-position VDI30 turret, sister tool management, tool life monitoring, integrated probe for dimensional control. Dismantling and loading of the machining centers is the responsibility of the buyer. A powered inspection by appointment is possible. Price/Details on request Sale only within EU countries All technical details are subject to error/typo.