Railway lahte MFD - DRH 130 II-k-s MFD H

MFD DRH 130 II-k-s

Condition: good (used), Centre distance: 6500 mm Centre height: 665 mm Swing diameter over bed: 1270 mm Turning diameter over cross slide: 1000 mm Spindle speed: 3.55-710 rpm Faceplate diameter: 1200 mm X-axis travel: 600 mm Main spindle bore: 128 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 350 mm Bcsdpfx Asw R Avbofheu Tailstock quill taper: DIN 55028 Main spindle nose: DIN 55027 Accessories: 3 steadies, documentation

Condition: used, functionality: fully functional, operating hours: 4,189 h, fuel type: diesel, mast type: duplex, FORKLIFT TCM FD25Z1 IZUSU ENGINE DIEZEL SHORT MAST.....START AND DRIVE..... Bjdpst U Ivtefx Afhecu

Year of construction: 2021, condition: new, OSTAS PLATE ROLLER TYPE 4R OHS 1570 X 200 - 4 Rolls - Capacity 1570 x 9 - Hardened rollers - Diameter above roll 200 mm - Diameter under roller 200 mm - Diameter side roll 180 mm - Hydraulic system - Digital display for movement left roller - Digital display for movement middle under roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roll positioning - Hydraulic up and down movement system with middle and side rolls - Hydraulic balancing system - Overload protection - Documentation - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE Bcedpfx Afegg N R Hehou

Condition: good (used), functionality: fully functional, turning diameter: 655 mm, turning diameter over bed slide: 655 mm, turning length: 5,000 mm, Swing diameter over bed 655 mm Swing diameter over support 390 mm Turning length 5000 mm Bedjw N D T Sopfx Afhscu Spindle bore 82 mm Spindle speed 9-1120 rpm Feed rate 0.049-3 mm/rev Total connected load 12 kW

Condition: used, Year of construction: 1961, ram hammer weight 750 kg ram hammer stroke 660 mm no. of strokes 100 /min impact energy 2040 kJ distance lower die block / ram gudeway 6600 mm Throat 750 mm steel forging - rectangular up to 240 mm steel forging - diameter up to 270 mm power requirement 75,0 kW weight of hammer 16,5 t weight of anvil 15,5 t weight 32,0 t Bodpfsvuullox Afhjcu dimensions (WxDxH) 3,2 x 1,45 x 3,45 m SPECIAL OFFER Forging hammer as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck video at seller's site before dismantling available

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Bedpfoqzkdmox Afhecu

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V total power requirement 5,5 kW weight of the machine ca. 650 kg Bcedpfx Afjg Ip Efjheu dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: used, Year of construction: 1995, turning diameter over bed slide: 500 mm, Universal lathe Make: ZMM Type 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Centre distance: 1000 mm Swing over bed ø: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolpost Bsdpfowudhuox Afhjcu • Live center • Coolant pump • Machine lamp All information subject to change. A live demonstration under power is possible at any time in our showroom.

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm - Thickness : 0.7 – 3.5 mm Bcjdsvtn H Tjpfx Afhju - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev Bjdpfevi Hrysx Afhscu rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .