Machining Center - Vertical

Microcut VM 1000

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min Dwjdpstvf Htjfx Adrea - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t Dwedpsvwgq Ssfx Adroa dimensions of the machine ca. 2000 x 1200 x 2500 mm The machine is supplied with a wide range of accessories

Year of construction: 2022, operating hours: 400 h, condition: as good as new (ex-display), functionality: fully functional, !!!Demonstration machine with low operating hours!!! Model: Lepton 5100 Year of manufacture: 2022 Operating hours: approx. 400 hrs Location: D 84069 Schierling Availability: short notice Equipment: - Base machine Lepton 5100 with screen decks 1 and 2 Screen deck 1 mesh size: 36 mm Screen deck 2 mesh size: 24 mm - Pre-screen deck with large hopper and variable dosing roller - Volume measurement via load - Prepared for air separator - Compressor - LED lighting package - Radio remote control for all key settings - Diesel-electric drive 80 kW - Axle levelling system - Tandem axle, road approval for 80 km/h - 19,000 kg total weight - Transport dimensions: 11.97 m total length, 3.98 m height, 2.53 m width, no special transport permit required Possible screening materials: Compost, green waste, biomass, root wood, waste wood, municipal waste, RDF, various recyclables (not suitable for construction rubble or excavated material) Miscellaneous: Djdpfort Uvzsx Adrewa Very good used condition, fully operational

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dodpfelz Rvljx Adrowa Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1990, condition: like new (used), Used Schuler hydraulic press for sale Brand : Schuler Schuler EB 2-500- 2.75-0.85 H-frame hydraulic press Power ( ton ) : 500 tons Table dimensions ( x-y/mm) : 3000×1800 Slide dimensions ( x-y/mm) : 3000×1800 Stroke ( x/mm) : 850 Stroke per minute from 12 to 24 Control Siemens S7 Dedpfxjhcnxrj Adrowa New hydraulic presses for sale

Condition: excellent (used), Year of construction: 2007, Type: CNC Lathe (horizontal) Manufacturer: Spinner Model: TC 52 Dsdjyki Hmopfx Adrswa Year of manufacture: 2007 Serial number: 123445 Control: Fanuc Three-axis machine: XZ C (C-axis is positioning only – no driven tools) Bar diameter: 42 mm Three-jaw chuck: 165 mm Operating/spindle hours: approx. 32,500 h / 6,400 h (read 11/2025) Accessories: chip conveyor, high-pressure coolant (IKZ), chuck, documentation Condition: Good

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dodpfx Ajvf D Anjdrowa

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included Dodpfx Ador Ezniorjwa

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) Djdergzv Nspfx Adrswa * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: excellent (used), High-performance spot welding tongs with a double-acting cylinder Manufacturer: DALEX, Type 3528 - 4 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31 kA Electrode force: 60-730 daN Double-acting cylinder, long stroke 62 mm, pre-stroke 40 mm Working stroke with stroke adjustment 0-22 mm with 5/2-way solenoid valve Cardan suspension and mounting bracket 10 m connection cable with control cable Arm extension: 170 mm Arm distance: 170 mm Dwsdski Tkpepfx Adrja Complete with 1 pair of electrode arms, straight on the top and bottom, 170 mm Synchronous welding control MPS 1036 Example photo