Machining center

MIKRON VCP 800 W

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec Nsdpfx Abeu T Nknsbswp - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hours: 16333 Nodpfx Asqgcimsbbewp Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Year of construction: 2004, condition: good (used), Used PolyClip FCA 3463 is an automatic food clipper used for closing plastic and collagen casings from calibers 40 to 120 mm. Caliber flexibility is achieved by quickly changing clip sizes from 15 to 18 mm and from 30 to 36 mm. Nodpfjk T A D Rsx Abbewp Equipped with automatic loop feeder. Producer: Poly-clip Model: FCA 3463 Type: Automatic double clipping machine Power: 2.8 kW Dimensions: L 1300 mm x W 1575 mm x H 2170 mm Weight: 625 kg

Condition: used, Year of construction: 2017, turning diameter 550 mm turning length 800 mm control FANUC Series 31i Model B spindle passage 76 mm turning speed range - drive spindle 3500 U/min drive capacity - spindle motor 40/25 kW max. torque on the spindle 864 Nm Number of tools 16 St. tool adaptor BMT rapid traverse 30 m/min dimensions 2,9 x 2,1 x 2,25 m weight of the machine ca. 6,5 t Used CNC- lathe with boxway system in very good condition Nwedpfx Abjw U U Idsbep Only 9.100 h power on. - 3- jaw chuck Ø 315 mm - chip conveyor - some tool holders - tailstock programmable - oil dust collector -"Build In" motor

Condition: good (used), Year of construction: 2009, functionality: fully functional, We offer: Universal Machining Center Manufacturer: Deckel Maho Type: DMC 80 U Year of manufacture: 2009 Control: Heidenhain MillPlus Technical specifications: X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Nsdpfx Absvx Tmcebjwp C-axis: 360° A-axis: -25° / +120° Max. spindle speed: 10,000 rpm Table size: 630 x 630 mm Max. table load: 800 kg Center bore: ⌀ 50 mm Tool holder: SK40 Tool changer: 180 positions Feed rate (x/y/z): 0 - 60,000 mm/min Rapid traverse (x/y/z): 60 m/min Operating hours: approx. 75,463 h Spindle hours: approx. 22,122 h Technical features: - Internal cooling Accessories: - Chip conveyor - Measuring probe Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Year of construction: 2010, functionality: fully functional, turning length: 300 mm, turning diameter over cross slide: 20 mm, turning diameter: 20 mm, spindle speed (min.): 10,000 rpm, spindle speed (max.): 10,000 rpm, spindle bore: 20 mm, rotational speed (max.): 10,000 rpm, power: 30 kW (40.79 HP), Turning and milling center complete with bar feeder LNS HYDROBAR MINI SPRINT bar loader(Maximum bar length 3,000mm) DMG MORI SPRINT 20-8 Control: Fanuc 310i Main spindle speed: 10.000 rpm Power: 5,5 kW torque: 14 Nm bar passage: max. 20 mm C1 axis: 0.001 travel Z1 axis: 80 mm Counter spindle speed: 10.000 rpm power: 5,5 kW torque: 14 Nm C2 axis: 0.001 Travel X2 / Z2 axis: 240 / 300 mm rapid traverse in X2 / Z2 axis: 40 m/min Tool carrier I (X/Y) Technology: Linear slide Internal machining: 6 stations tool holder: 20 mm External machining: 6 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck, ESX 16 Travel in X/Y axis: 50/350 mm Rapid traverse in X/Y axis: 40/30 m/min Tool carrier II (Y) Technology: Linear slide internal machining: 4 stations tool holder: 20 mm External machining: 4 stations Tool holder: 12 x 12 mm Driven tool stations: 5 Tool drive: 3,450 / 6,000 rpm Tool holder: collet chuck , ESX 16 Travel in Y2 axis: 120 mm rapid traverse in Y2 axis: 40 m/min MACHINE DETAILS weight: 4200 kg Connected load: 30 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Nodpfoq Nmm Eex Abbjwp Chip management: chip conveyor Coolant management: Coolant pump Fire extinguishing system: Kraft + Bauer Oil mist extraction: Interface prepared Further equipment: Signal lamp

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier Nedpjiwfp Tefx Abbswp - 24 months warranty - Commissioning, training

Condition: good (used), Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, CONTROLS .. CNC controls HEIDENHAIN ITNC 530 WORKING RANGE -CUBIC- .. number of processing axes (excl parallel axes): 5 .. X-axis travel: 1800 mm .. Y-axis travel: 2000 mm .. Z-axis travel: 1100 mm TABLE Njdoxtiwcopfx Abbjwp .. table surface (left-right): 1700 mm .. table surface (front-back): 1400 mm .. workpiece load (max): 5000 kg SPINDLE / HEAD .. spindle revolutions (max): 10000 /min .. tool fixture: HSK A100 .. drive power S6 40%: 44 kW .. drive power S1 100%: 32 kW TOOL MAGAZINE .. number of positions: 100 ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 8400 mm .. space requirements -front/back-: 9000 mm .. total height: 4200 mm .. total weight approx.: 35000 kg ATTACHMENTS .. chip conveyor: yes .. coolant unit: yes .. band filtration unit: yes .. through spindle coolant attachment: yes .. closed cabin: yes .. European CE standards: yes Equipment: - Infrared measuring probe Heidenhain TS 641 - Coolant tank 900 l - IKZ 40 bar through spindle center (AD) - rotating lens - Electronic handwheel - 3D path control Optional: - hyd. Clamping system (Stark)

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Nsdpfx Abexflr Hsbewp Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2012, x-travel 762 mm y-travel 508 mm Nsdoxddrpspfx Abbjwp z-travel 508 mm Control Haas CNC Max. rpm 12.000 min/-1 power capacity - main spindel 22,4 kW max. Torque 102 Nm tool taper ISO 40 table surface area 914 x 457 mm T-slots 16 mm max. table load 1362 kg number of toolpositions 24 pos. tool taper SK 40 max. tool diameter 76 (152) mm max. tool weight 5,4 kg change-time tool to tool 2,8 sec change-time chip to chip 3,6 sec rapid traverse ( X / Y / Z ) 18,0 m/min Number of working hours 14375 h spindle drive 22,4 kW weight of the machine ca. 3,42 t dimensions of the machine ca. 3,2 x 2,5 x 2,8 m Well-maintained 5-axis machining center, 3-axis machine + 2-axis dividing head. Machine with low operating hours (14,375). Lehmann dividing head, model ix-Y3, weight 80 kg. Machine dealer with own stock of 1600 m².