Diesel Forklift

Mitsubishi FD35K - Zinkenversteller + Seitenschieber -Duplex

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Nedpfovvkipsx Aa Dewb

Condition: excellent (used), Year of construction: 1994, Wide belt sander Manufacturer: Bütfering Type: AWS 2 KC 1100 Year of manufacture: 1994 Nwodpfx Aovuza Nea Deb Working width: 1,100 mm Max. passage height: 150 mm Number of sanding units: 2 Sanding roller power: 15 kW Sanding shoe power: 11 kW Feed power: 1.5 kW Feed: 3 - 15 m/min, continuously adjustable Weight: approx. 3,300 kg Dimensions: 1,750 x 2,210 x 2,280 mm

Year of construction: 1998, condition: reconditioned (used), coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Mark: eugen Model: Mayer 715 Description: beveller saw with drilling for Eugen Mayer coffins Year: Njdjkmgpvopfx Aa Dewb 1998

Year of construction: 2022, condition: as good as new (ex-display), machine/vehicle number: MA0044_SN0056019, New 4 kW screw compressor FirstAir with integrated refrigeration dryer and 200 liter compressed air tank and time-controlled steam trap Type: FAS4-200AT Year of construction: 2022 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 470 liters / min Installed motor power: 4 kW Njdefcrz Hspfx Aa Dswb Protection class / insulation class drive motor: IP 55 F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 65 +/- 3 Compressed air connection: G 1/2 " Length: 1500 mm Width: 700 mm Height: 1550 mm Weight: 435 kg Drive: V-belt drive Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Nwsdpsw I U N Iofx Aa Djb Dedusting brush: yes Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: ready for operation (used), Year of construction: 2001, Bütfering Classic 211 CE wide belt sander Working width 1100 mm Sanding belt width 1120 mm Sanding belt length 1900 mm constant table top head infeed 1st unit type C combined contact roller sanding pad unit with -profiled steel contact roller. -Electronically controlled sectional sanding pad, element width 50 mm -Motor power 15kW 2nd unit type E -Sanding shoe unit -electronically controlled link pressure beam, element width 25 mm -Motor power 15 kW -Infinitely variable sanding belt speed 2 to 18 m/s via frequency converter Synchronous and counter-rotation -Belt blow-off device Transport carpet with infinitely variable feed2.5 - 13 m/min Vacuum clamping device 4 kW Nwsdpfx Aajt Ucp Us Deb Control of the suction slides Roller tables in the inlet and outlet Workpiece cleaning : Rotating cleaning brush 0.75 kW Machine function tested Price 15500.- year of construction 2001

Year of construction: 2016, operating hours: 8,093 h, condition: used, functionality: fully functional, fuel type: diesel, lifting height: 3,500 mm, free lift: 150 mm, mast type: simplex, construction height: 2,700 mm, drive type: Diesel, load capacity: 5,000 kg, Diesel forklift Load centre of gravity: 500 Njdpfovxby Rjx Aa Dowb ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Technical condition: good Front tyres type: super elastic Front tyres condition: 0 - 20% Rear tyres type: super elastic Rear tyres condition: 0 - 20% Description: The vehicle is UVV-tested. Before delivery, the machine is serviced and cleaned. On request, the machine can be painted for an additional charge. Side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heating, full cabin,

Condition: used, functionality: fully functional, machine/vehicle number: H2X393E02775, Year of construction: 2014, operating hours: 8,710 h, load capacity: 3,000 kg, lifting height: 4,600 mm, free lift: 1,600 mm, fuel type: diesel, mast type: triplex, construction height: 2,150 mm, fork carriage width: 1,150 mm, fork length: 2,000 mm, empty load weight: 4,505 kg, total length: 2,800 mm, drive type: Diesel, construction width: 1,250 mm, Diesel forklift Chassis number: H2X393E02775 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Linde Condition: Ready for use and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 23x9-10 Njdpfxov E S H Io Aa Dowb Side shift, fork positioner, 3rd valve, 4th valve, front work light, half cabin,