Conveyor belt

Mobil SZP-3500/400

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Bledpfx Ajn Hwl Ajprjh Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: used, Year of construction: 2001, No. of controlled axes: 8 Swing over bed (mm): 650 Swing over carriage (mm): 250 Distance between centers (mm/in): Max. 1450 / 57.08, Min. 310 / 12.20 Max. turning diameter × length (mm/in): Ø300 × 300 / Ø11.81 × 11.81 Bljdow N Nqvjpfx Aprjh SPINDLE Spindle nose taper: JIS A2-11 Spindle diameter (mm): 120 Spindle hole (mm): 80 Spindle speed range (min⁻¹ / rpm): 38 – 3800 Number of spindle speed ranges: 2 Please see photos of specs. Includes all parts and tools in pallets.

Condition: new, Year of construction: 2026, Yanigav Pile Driver RE800GIII Bljdpfx Aper Ezhysroh • Weight: 1200 kg • Dimensions (W x H): 2.00 x 2.60 m (transport position) • Blow frequency: 670–1500 blows per minute • Impact energy: 280 Joules • Bell inner diameter: 120–150–200 mm • Pile length up to 3 m

Year of construction: 2016, condition: good (used), For inquiries: Zoltán Utasi +36 30 205 7380 • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min Bledpfx Apowkf Tworeh LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: new, Automatic Wood Chip and Wood Shavings Fired Boiler System Technical Data: Type: T4 – 150 Output: 150 kW Width: 790 mm Height: 1840 mm Length: 1770 mm Weight: 1500 kg Water capacity: 340 l Bljdpfxsykqwme Apreh Maximum permissible operating temperature: 90°C Maximum permissible operating pressure: 3 bar Electrical connection / Power supply: 400 V / 50 Hz / C16A

Condition: good (used), Centrifugal fan, Fan, 75 kW Fan, Used machine Overall dimensions : 2030 x 1750 x 1490 mm Air flow rate : 50 760 m3/h Bedeua Eu Nspfx Aprolh

Condition: used, Year of construction: 2000, sheet length: 4.100sheet thickness: 12total power requirements: 30weight approx.: 17350messurements (LxWxH): 4750 x 3400 x 2350back gauge: 1000New Price: approx. 100,000 EURO Condition: Used, very good condition Equipment: - Swing cut execution - NC preset control ELGO for rear gauge - Motorized rear gauge up to 1,000 mm on ball screw spindles, foldable - Clearly arranged control panel mounted on a swivel arm - Hydraulic hold-downs positioned close to the cutting edge - Footswitch - Central manual cutting gap adjustment Accessories: - 1 side fence 1,500 mm with scale, T-slot, and tilting bolt - 2 sheet metal support arms 1,000 mm with T-slot - Easy replacement and resharpening of the blades - Adjustable cutting length for efficient processing - Lower blade 4-fold reversible - Upper blade 2-fold reversible Bljdpjwiatvofx Aprjh Additional Details: - Operating manual in GERMAN - Machine and equipment comply with CE regulations

Condition: new, bending length: 3100sheet thickness: 8upper roll diameter: 230 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Bjded Ab Tgopfx Aprolh Center support EURO 8.250.00 Side supports EURO 7.070.00 We have many references!

Condition: good (used), Year of construction: 1999, functionality: fully functional, For sale: complete production line for rotors and stators, including full assembly of the corresponding motors. Some of the brands/models: Promotech, Stihl, etc. Machines on the stator line include: stator core press, stator insulation insertion machine, dispensers for insulating plastic, stator winding machine, machine for cutting excess wire, tab welding machine, stator inspection station. Machines on the rotor line include: rotor core press, rotor insulation insertion machine, commutator press-fitting machine, rotor winding machine, rotor testing (rototest). Additionally: rotor varnishing machine, finishing operations (lathe for commutator and rotor core machining), balancing machine, cutting/sawing machine, rototest. Blsdpfey Ddrrjx Apreh Also includes: assembly line for complete motor assembly, DAKS device for motor testing, conveyor belt, packaging unit. For more pictures, detailed information, or any inquiries, we are at your disposal.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 6131, • Rated power: 52,000 kW • Rated speed: 3,615/1,500 Bedpfx Aey Dq Hieprelh Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended.