Vertical machining center

Mori Seiki NMV5000 DCG

Condition: like new (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS CNC Control: MSX 711III MAPPS IV (FANUC) X axis travel (mm): 730 Y axis travel (mm): 510 Z axis travel (mm): 510 B axis (mm): +160 / -180 C axis (degrees): 360 Number of pallets: 1 Table size (mm): Ø500 Maximum table load capacity (kg): 300 Cutting feed rate (mm/min, X/Y/Z): 50,000 / 50,000 / 40,000 Maximum rapid traverse (m/min, X/Y/Z): 50 / 50 / 40 Spindle speed (rpm): 12,000 Spindle power (kW): 18.5 / 15 Taper type: BT-40 Torque (Nm): - Tool changer type: Chain Tool changer positions: 122 Maximum tool diameter (mm): 90 Maximum tool diameter with adjacent positions empty (mm): 125 Maximum tool length (mm): 300 Maximum tool weight (kg): 8 Coolant tank capacity (L): 750 INCLUDED EQUIPMENT Rotary table with digital readouts Coolant through spindle Electronic handwheel integrated on CNC panel Main benefits of the included FANUC options: Ledpfjwv Sguex Af Seai - Enhanced control power and stability: Enables simultaneous management of all 5 real axes with complete smoothness and precision, maintaining performance even during complex machining operations. - Expanded memory and advanced program management: Capacity to store up to 1,000 programs, ideal for production environments with multiple references or short series. - Custom interpolations and macros: Facilitate the programming of special paths, automatic cycles, and subroutines tailored to operator requirements, reducing setup times and errors. - High-speed processing and maximum precision: Optimized FANUC control provides smoother movements, reduced vibration, and increased dimensional accuracy, especially in simultaneous 5-axis machining. - Full compatibility with automation systems: The system is ready for use with EROWA or other automatic changer systems; easily integrates into automated lines or robot cells. MACHINE DIMENSIONS Length (mm): 2,771 Width (mm): 3,948 Height (mm): 3,264 Weight (kg): 12,400

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system • UPS system: protects the console PC against voltage drops and guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. Lasdpfx Aowk Ntuef Sei • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Lasdpfopu A D Asx Af Soi Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: used, _____ Description: Year of manuf. : 2009 Control : Siemens C200-4D SL In General: Ledpfevxmy Njx Af Sjai Year of construction:2009 Control system:Siemens 840 Dsl (C200-4D SL) Bar capacity:65 mm Milling spindles:18,000 rpm Main spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° Z-axis:390 mm Bar capacity:65 mm Clamping cylinder:Hollow clamping cylinder Chuck:3-jaw chuck Sub spindle: Technology:Motorised spindle Speed:5,000 rpm Max. power:35.5 kW Torque max.:170 Nm C-axis:0.001° X-axis:600 mm Z-axis:390 mm Bar capacity:65 mm Chuck:3-jaw chuck Tool carrier I: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 X-axis:350 mm Y-axis:160 mm (+/- 80 mm) B-axis:230° Tool carrier II: Technology:Milling spindle on cross slide Speed:18,000 rpm Tool holder:HSK 40 Y-axis:160 mm(+/- 80 mm) B-axis:230° Tool magazin: Technology:Chain magazine Number of stations:80 pieces Tool changer:Double gripper Tool length max.:180 mm Equipment: Chip disposal:Chip conveyor Coolant supply:IKZ system with filter Parts removal:Gantry-type pick-up Bar loader interface:Electrically prepared Tool monitoring:Drill breakage monitoring

Year of construction: 2008, operating hours: 40,000 h, condition: good (used), machine/vehicle number: HBC 140 2x75kW 2008 (00191), Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Laodpfx Ajkcgf Hof Ssi Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 027.0400/067, CNC CYLINDRICAL GRINDER STUDER S-33 CNC Year: 2007 - Fanuc 21i-TB 1 External Grinding Spindle Country of Origin: Switzerland Voltage: 380/50/3 Net machine weight: 4,000 kg TECHNICAL SPECIFICATIONS Distance between centers: 600 mm Center height: 175 mm Maximum workpiece weight: 80 kg Longitudinal Slide Z Max. travel: 800 – 1,150 mm Travel speed: 0.001 to 10,000 mm/min (early 2000’s model: 0.001-5,000 mm/min) Resolution: 0.0001 mm Cross Slide X Max. travel: 285 mm Travel speed: 0.001 to 20,000 mm/min (early 2000’s model: 0.001-10,000 mm/min) Resolution: 0.0001 mm Wheelhead (universal version) Swiveling range: -15° to 225° (early 2000’s model: -15° to 195°) Swivel axis: 2.5 / 1 ° Hirth Drive power: 7.5 or 9 kW or 11 kW Laodpfew T Sh Eox Af Sei Grinding wheel: 500x63 (80/110F5) x203 mm Workhead Rotational speed: 1 – 1,500 min-1 Mount taper: MT4 or MT5 / ISO 50 Drive power: 1.6 or 3.0 or 4.0 kW Tailstock Mount taper: MT3 or MT4 Quill stroke: 35 / 50 mm (early 2000’s model: 35 mm) Quill diameter: Ø 50 mm Fine adjustment: +/- 40 µm Control system: Fanuc 21i-TB All technical details are provided in good faith but subject to errors or omissions.

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Modell: VX380TD Year of c.: 2007 Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 Ljdpfoiw Ekdjx Af Ssai X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 21,500 h, functionality: fully functional, Tsugami BO205E-III incl. Iemca Smart 320 loading magazine Conversion from long to short lathe possible High-pressure pump with 4 controllable valves Lajdpfx Aowdru Iof Sji Fire extinguishing system -available immediately-

Condition: ready for operation (used), Year of construction: 1996, 630T press retrofitted in 2010 by the company LITOSTROJ RAVNE Capacity: 630 tons Total power: 15 - 630 tons Ring power: 10 - 230 tons Lifting power: 50 tons max Back pressure power: 5 - 120 tons Ejection power: 22 tons max Max slide stroke: 180 mm Ring race: 30 mm Back pressure stroke: 30 mm Slide surface: 900 x 900 mm Table surface: 900 x 900 mm Number of strokes: 28 - 72 s.p.m. Power requirement: 80 kW Default configuration Lajdpfxshh Hwle Af Soi

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 2.2/3.7 [kW] - C axis indexing precision : 0.0001 [°] COUNTER-SPINDLE - Z stroke : 205 [mm] - Spindle speeds : 9000 [rpm] - Spindle power : 0.55/1.1 [kW] - C axis indexing precision : 0.0001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 - Number of motorized positions : 2 - Live tools speed : 6000 [rpm] END ATTACHMENT - Number of positions : 4 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 3.7 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2070x1177 [mm] Ljdjwpl Acopfx Af Sjai - Machine height : 1760 [mm] - Machine weight : 1700 [kg] EQUIPMENT - CNC : Fanuc series Oi-TD - 3 colors status lamp - Rotating guide bush - Parts conveying strip - Coolant tank * with high-pressure pump : 100 [bars] - Bar loader : IEMCA