CNC Turning- and Milling Center
MORI SEIKI NTX 3000 /1500 2nd Gen.

Name: MORI SEIKI NTX 3000 /1500 2nd Gen.
Brand: MORI SEIKI
Availability: InStock

Year of construction

2020

Condition

Used

Location

Germany

CNC Turning- and Milling Center MORI SEIKI NTX 3000 /1500 2nd Gen.

Machine data

Machine type:: CNC Turning- and Milling Center

Manufacturer:: MORI SEIKI

Model:: NTX 3000 /1500 2nd Gen.

Year of construction:: 2020

Condition:: used

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A21554143

Reference number:: 1070-100711

Update:: 20.03.2026

Description

Technical details:

turning diameter: 670 mm
turning length: 1540 mm
control: F31iB5 Celos Fanuc 35iB5
swing diameter max. over bed cover: 700 mm
Travel turret No.1 (milling spindle) x/y/z: 495 / ± 150 / 1562(+164) mm
Rotation B-axis: -30° / +210°
Rapid traverse feeds turret 1 (milling head) x/y/z: 40/40/40 m/min
RPM milling spindle: 12000 1/min
power capacity - milling spindle: 20,2/18,8 kW
Torque of milling spindle: 120 / 44 Nm
tool taper milling spindle: Coromant Capto C6
Tool magazine for milling spindle (turret 1): 76
Tool change time tool/tool, milling spindle: 1,25 s
Spindle 1 RPM: 3000 1/min
Spindle 1 Power: 36 / 30 / 25 kW
C-axis spindle 1: 0,001 °
Bar capacity spindle 1: 102 mm
Spindle 2 RPM: 4000 1/min
Spindle 2 power: 26 / 22 / 15 kW
C-axis spindle 2: 0,001 °
Bar capacity spindle 2: 80 mm
dimensions of the machine ca.: 7,8 x 3,6 x 2,9 m
Linear scales on axis: X, Y
Iiedpfxsyv E T Uo Af Tjb
programmable steady: KLU-A530 & SLU-X3.2

Accerories

Chip conveyor
tool setting
spindle load monitor
Airblow system
Airblow system internal to cutting tool
Spindle 1 Chuck Kitagawa 250 (B 210) mm
Spindle 2 Chuck Kitagawa 250 (B 210) mm
Interface for coolant through the spindle 70 bar
Tailstock specification for spindle 2
Measuring probe for work piece Renishaw OMP60
pendant hand wheel
Parts and total counter
Signal lamp 3 colors
Robot interface Matris Robot System R-2000iC/165F
Automatic door
Rotoclear window
Quick fixed cycles
Program restart
Signal lamp 4 colours
Ethernet I/P Interface
manual tool eye
Automatic door
Air Filter
Oil skimmer
Tactile sensor for workpiece measuring
Airblow system external Subspindel
Spindle 1 coolant jet
Spindle 2 coolant jet
Coolant Gun
Coolant through spindle 70 bar with filter Knoll

High performance turning and milling center with multi axis milling head, 76 tool magazine Capto C6, main- and sub spindle, which can act as tailstock.
It has automatic door and Matris robot R-2000iC/165F.

*

Seller

Registered since: 2005

22 listings online

Call

Send inquiry

Telephone & Fax

+49 7231 ... show

Fax:

These listings may also fit your interest.

Listing

Surface Grinding Machine Ziersch GmbH ZT 820

Germany

6,760 km

Surface Grinding Machine
Ziersch GmbHZT 820

Call

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Iijdpfxeuyk N Ij Af Teb

See details

Listing

Tool and Cutter Grinder Schneeberger NORMA CFG

Zuchwil

6,964 km

Tool and Cutter Grinder
SchneebergerNORMA CFG

Call

Condition: used, Year of construction: 2003, CNC Tool Grinding Machine Schneeberger NORMA CFG Iiedpfx Asxz R T Uef Tsb Year of manufacture: 2003 Center height: 210 mm Table length: 950 mm Table width: 310 mm Travel X-axis: 380 mm Travel Y-axis: 280 mm Travel Z-axis: 280 mm Grinding wheel diameter: 50–200 mm A-axis grinding head rotation: 360° C-axis tool rotation: 340° C-axis spindle resolution: 0.001° Tool holder: HSK 50 Grinding spindle speed, stepless: 0–9000 rpm Hydraulic unit: 6 bar Connection: 3×400 V / 50 Hz Spindle power: 7.5 kW Total power requirement: 33 kVA Machine weight: approx. 5,500 kg Machine dimensions Length: 1,930 mm Width: 1,590 mm Height: 2,250 mm Control system: GE Fanuc Series 16-M Accessories: various grinding wheel mounts and tool holders Max. operating current: 3×40 A No guarantee is given for the accuracy, completeness, or timeliness of the information.

See details

Listing

Gussago

6,767 km

ORT RP30U inverter
ORTRP30U inverter

Call

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton Iiedpfxst H Ty Uo Af Tsb swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

See details

Listing

Pfeiffer C590 PVD Evap.Sputtering System Pfeiffer C590

Budel

7,098 km

Pfeiffer C590 PVD Evap.Sputtering System
PfeifferC590

€99,500

Fixed price plus VAT

Call

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: Iijdpfxehwv Tfj Af Teb for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

See details

Listing

Universal machining center DMG MORI DMU 50 3rd

Trittau

6,782 km

Universal machining center
DMG MORIDMU 50 3rd

Call

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG MORI Model: DMU 50 3rd Generation Year of manufacture: 2019 Control system: Heidenhain TNC 640 Technical specifications: Travel distances: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range: 0 – 20,000 rpm Drive power – main spindle (100/40%): 35 / 25 kW Torque: 130 / 86 Nm Worktable: Swivel rotary table, simultaneous operation: D 650 x 500 mm Tool changer: Tool holder: CAT 40 (conversion to SK 40 possible) Number of tool stations: 60 positions Operating hours: approx. 13,500 h Spindle hours: approx. 5,300 h Technical features & accessories: - Active spindle cooling - Direct position measuring system in X, Y, Z, B, C - Scraper-type chip conveyor - Internal coolant supply (ICS) 40/80 bar, consisting of: - Paper band filter - 980 l tank - Cabin roof - Rotary union in the spindle - Blowing air through the spindle center Iedpfoy Rx Stex Af Tjib - Dual switch filter - Rotating inspection window - Rinsing gun for chip flushing - Oil and emulsion mist separator - Infrared measuring probe, make: Renishaw PP 60 optical (OMP 60) - Tool breakage control IRS2 - Preparation for 3D quickSET - MPC (Machine Protection Control) - Operating mode 4 - Coolant temperature control for ICS system Accessories, depicted tools, and clamping devices are only included in delivery if specified in the additional information. Subject to change and error in technical data and information as well as prior sale!

See details

Listing

CNC turn-mill center Okuma MULTUS B400-C

Lontzen

7,071 km

CNC turn-mill center
OkumaMULTUS B400-C

Condition: good (used), Year of construction: 2008, - Max. turning diameter over bed: 700 mm - Turning length: 1,500 mm Main spindle: - Speed range: 2,800 rpm - Enlarged main spindle: Ø 150 mm, bore: 110 mm - Drive power: 30 kW, 900 Nm - Spindle nose: Size 11 Total power requirement: 59.5 kVA Approx. machine weight: 14.5 t Space requirement approx.: 6.4 x 3.0 x 2.6 m EQUIPMENT: Iedpfx Afexmirge Tsib - 3-jaw chuck, SMW KNCS-N 400 K11 - Tailstock - Programmable CNC steady rest slide (cross slide NOT retractable) - SMW-AUTOBLOK SLU-3, self-centering steady rest, clamping range Ø 12 - 152 mm - Full clamping cylinder for partial hollow clamping, draw tube bore max. Ø 100 mm - In-process measuring system Renishaw for X-/Z-/C-axis - Programmable CNC tailstock on W-axis - Drilling/milling spindle and C-axis 0.001° - Tool changer: 80 positions Tool system: HSK-A63 - Y-axis travel +115/-115 = 230 mm - B-axis 225°, positioning in 0.001° increments - ICS / internal coolant supply for driven tools - Synchronized thread cutting with driven tools - Software for use of multifunctional tools, e.g. special tool with radially arranged indexable inserts, which can be positioned in the drilling/milling spindle at 60°, 90°, 120° and 180° positions - Software for gear hobbing for straight and helical gearing with speed synchronization of main and milling spindles - Electrostatic extraction unit - Chip conveyor - Documentation - CE marking

See details

Listing

Weiterstadt

6,885 km

Vertical machining center
HurcoVMX 30

Call

Condition: used, Year of construction: 2007, TECHNICAL DATA Travel X 760 mm Ijdpfx Afewud Afs Tsib Travel Y 510 mm Travel Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10–10000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Linear guides with ball bearings in X, Y, Z axes Rapid traverse X/Y/Z 30 / 30 / 20 m/min Feedrates programmable 3.0–7600 mm/min Positioning accuracy ±0.01 mm Repeatability ±0.005 mm Automatic tool changer (double-arm) 24 positions Internal cooling Chip conveyor

See details

Listing

Oberhausen

7,010 km

Machining center
LAGUNL 1400

Call

Condition: new, power: 25 kW (33.99 HP), travel distance X-axis: 1,430 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 640 mm, workpiece weight (max.): 1,200 kg, number of slots in tool magazine: 30, controller manufacturer: HEIDENHAIN, total height: 2,900 mm, total length: 4,855 mm, total width: 2,945 mm, overall weight: 11,000 kg, Equipment: CE marking, documentation/manual, LAGUN L 1400 Machining Center – available for immediate delivery The LAGUN L 1400 machining center stands for high precision, robust design, and economical production. Ideal for single-part production as well as series production in mechanical engineering, mold making, and contract manufacturing. Your advantages at a glance: ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly via JMT ✔ Financing / leasing possible ✔ Compact design with high stability ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and durable machine concepts. The machining centers impress with their reliability, ease of maintenance, and low operating costs. Technical equipment: Control system: HEIDENHAIN TNC 7 CNC control Iijdpohy Atfjfx Af Tjb HEIDENHAIN TFT screen 16" HEIDENHAIN motors, measuring systems, and electronic handwheel HR 510 Chip disposal: Chip conveyor Preparation: Preparation for 4th axis (rotary table) Enclosure: Full enclosure with side-opening viewing windows Accuracy: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.

See details

Listing

10,000 liter fuel oil diesel tank storage tank Tankanlagen Wozniack 10.000 Liter Tank nach EN 12285-2 Norm

Warstein

6,905 km

10,000 liter fuel oil diesel tank storage tank
Tankanlagen Wozniack10.000 Liter Tank nach EN 12285-2 Norm

Call

Year of construction: 2023, condition: new, Tank-& Umweltschutz Wozniack Specialist company according to the Water Resources Act Dear Sir or Madam, we offer a 10,000 liter double-walled storage tank for the storage of fuel oil. EN 12285-2 standard Iijdpfxsk Dpv Ao Af Tjb Nominal capacity 10 cbm new EN 12285-2 norm Color equipment Lacquer RAL ; 7035 Material steel in steel, material S235JRG2 Documentation Manufacturer's certificate/ nameplate piece 1 dipstick Piece 1 air vent Piece 1 filling nozzle Piece 1 new limit switch Piece 1 new leak detection sight piece 1 ladder Piece 1 suction line tank dimensions approx. 5.300 mm diameter approx. 1.600 mm Weight approx. 2.000 kg Storage above ground Delivery time = September With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

See details

Listing

Petrovče

6,380 km

Wood shredder
RobustSD 900 XL/30 kW

Call

Condition: new, Year of construction: 2026, ♻ Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, Ijdpfoiq U Ayox Af Tsib plastics, textile etc.) ✔ Power: 30 kW ✔ Shaft length: 870 mm ✔ Shaft diameter: 270 mm ✔ Shaft RPM: 80-120 rpm ✔ Number of cutting knives: 38 ✔ Granulation: 10-50 mm ✔ Capacity: up to 8 m3/h* ✔ Filling opening: 2031 x 1565 mm ✔ Dimensions L/W/H: 3,21/1,97/2,04 m ✔ Weight: 2450 kg 2 years warranty or 2000 working hours

See details

Advertise here