CNC Turning- and Milling Center
MORI SEIKI NZ 1500 T3Y3

Name: MORI SEIKI NZ 1500 T3Y3
Brand: MORI SEIKI
Availability: InStock

Year of construction

2008

Condition

Used

Location

Oelde

CNC Turning- and Milling Center MORI SEIKI NZ 1500 T3Y3

Machine data

Machine type:: CNC Turning- and Milling Center

Manufacturer:: MORI SEIKI

Model:: NZ 1500 T3Y3

Year of construction:: 2008

Condition:: used

Price & Location

Location:: D-59302 Oelde

Call

Details about the offer

Listing ID:: A16165298

Reference number:: 1039-9053

Update:: 16.05.2024

Description

turning diameter max. 320 mm
turning length 810 mm
control MSX 701 MAPPS III
standard turning dia. 200 mm
Main spindle:
Number of revolutions max. 6.000 min/-1
power capacity - main spindel 22 / 18,5 kW
Rcedpfx Afotqmqwohod
Bar feed max. 52 mm
spindle bore 61 mm
C-Axis 0,001 °
Subspindel:
Number of revolutions max. 6.000 min/-1
power capacity - Sub spindle 22 / 18,5 kW
Bar feed max. 52 mm
spindle bore 61 mm
C-Axis 0,001 °
Turret 1 + 3:
number of toolpositions je 16 pos.
Number of driven toolspositions je 16 pos.
Spindle speed - driven tools max. 6.000 min -1
power capacity - driven tools 7,5 / 5,5 kW
Y - Axis 110 (+65 / -45) mm
Turret 2:
number of toolpositions 16 pos.
Number of driven toolspositions 16 pos.
Spindle speed - driven tools max. 6.000 min -1
power capacity - driven tools 7,5 / 5,5 kW
Y - Axis 110 (+45 / -65) mm
axis stroke:
x-travel 1-3: 210 mm
y-travel 1-3: 110 mm
z-travel 1+3: 300 / 2: 810 mm
total power requirement 90 kVA
weight of the machine ca. 9,3 t
dimensions of the machine ca. 4,5 x 3,0 x 2,5 m
CNC - Turning- and MillingCenter
MORI SEIKI - NZ 1500 T3Y3

- Main- and Subspindle
- 3 turrets, 2x upper / 1x below
- 3x Y-Axis
- 3x 16-pos. tool-drive

- incl. 28x collets
- incl. Hainbuch changing device

Seller

Registered since: 2012

124 listings online

Call

Send inquiry

Telephone & Fax

+49 2522 ... show

Fax:

These listings may also fit your interest.

Listing

Castellbisbal

7,456 km

Gantry milling machine
AWEALP-4021Z

Call

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,000 mm, table length: 4,020 mm, table width: 2,010 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, table load: 12,000 kg, workpiece weight (max.): 12,000 kg, overall weight: 29,000 kg, spindle nose: 200-1200, spindle motor power: 45,000 W, PORTAL-TYPE MACHINING CENTER, YEAR OF MANUFACTURE 2015 LARGE TRAVEL RANGE: 4000 x 2100 x 1000 MM DUAL SPINDLE, ISO 50, 5000 RPM, 45 KW EQUIPPED WITH HEIDENHAIN TNC 530 32-TOOL TOOL CHANGER CHIP CONVEYOR MANUAL ANGLE HEAD TOOL PRESETTER Rcodpfx Afoy Tu I Nshed PREPARATION FOR WORKPIECE PROBE (PROBE NOT INCLUDED)

See details

Listing

Band saw KASTO - KASTOtec A3 KASTO KASTOtec A3

Babberich

7,060 km

Band saw KASTO - KASTOtec A3
KASTOKASTOtec A3

Call

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Rcjdju R R Acspfx Afhed Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

See details

Listing

Universal machining center Hermle C 30 U

Weißenhorn

6,768 km

Universal machining center
HermleC 30 U

Call

Condition: good (used), Year of construction: 2011, Control system: Siemens 840 D pl X-axis 650 mm – Y-axis 600 mm – Z-axis 500 mm A-axis +- 115° - C-axis 360° Spindle 18,000 rpm, power 13 / 10 kW, tool holder HSK-A63 Tool changer 32 tool positions - additional magazine 87 positions NC rotary table ø280 PW160 with pallet clamping system, automatic cabinet doors, hydraulic and pneumatic extension, pallet changer PW 160-400x400 mm, pallet storage system control 3D tool radius correction, A-axis standard version, A-axis position offset Internal coolant supply 80 bar, includes: KNOLL paper band filter, KNOLL chip conveyor, standard coolant system, clean air supply for measuring probes, machine bed flushing, scraper conveyor Air blast through the spindle center, manual cabinet roof, laminated safety glass, rotating clear window, electric thermal compensation, electric manual control module, measuring probe Renishaw incl. BLUM tool breakage/measurement, chip flushing gun Rodozint Iopfx Afhecd 7 pallets 400/STM190 with thread drilling grid Oil mist extraction system LTA, technical documentation (German) Total spindle hours: 18,667 h, new spindle in 2025 at 16,560 h.

See details

Listing

Mindelheim

6,742 km

CNC lathe
MCMATL HEAVY PLUS 900x14000

Call

Condition: used, Year of construction: 2021, Horizontal precision lathe M.C.M. ATL HEAVY PLUS 900x14000 with CNC control Fanuc Condition: Used Year of manufacture: 2021 Technical data: Rcjdpfxjywhhke Afhjd Centre height: 900 mm Swing diameter over bed: 1800 mm Swing diameter over cross slide: 1400 mm Distance between centres: 14000 mm Max. workpiece weight between centres: 15000/18000 kg Bed width: 1100 mm Number of bed ways: 3 (2+1) Equipment: - FANUC CNC control, model FANUC 32i-B with MANUAL GUIDE i - Automatic turret with 12 positions and driven tool stations (Baruffaldi) MOD. TBMA 320 BDI 60 + C-axis - Chip conveyor (front) - Chip conveyor (rear) - 2 steady rests, diameter up to 600 mm - 2 steady rests, diameter up to 1100 mm

See details

Listing

Trittau

6,782 km

CNC Lathe
TRAUBTNA 400

Call

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: Rjdoxwdw Espfx Afhocd - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

See details

Listing

CNC Machining Center DMG Mori HSC 55 linear

Germany

6,760 km

CNC Machining Center
DMG MoriHSC 55 linear

Call

Condition: ready for operation (used), Year of construction: 2009, Travel X/Y/Z: 450mm/580mm/400mm, swivel range A/B: -110°/+10°, rotation range C: 360°, table dimensions X/Y: 400mm/400mm, tool positions: 30, tool holder: HSK-E50, spindle speed: 42000rpm, max. workpiece weight: 200kg, feed: 80m/min, max. tool length/diameter: 250mm/80mm. Machine dimensions X/Y/Z: approx. 3250mm/2950mm/2900mm, weight: approx. 9500kg, control: Heidenhain iTNC530. Documentation available. An on-site inspection is possible. The machine is located in China. Rodpfjxf Ii Uox Afhjcd

See details

Listing

2-axis CNC turning center DAWEOO LYNX 200B

Cascina Faustina

6,860 km

2-axis CNC turning center
DAWEOOLYNX 200B

Call

Condition: used, Year of construction: 1998, operating hours: 8,700 h, functionality: fully functional, The used DAEWOO Lynx 200B 2-axis CNC lathe is a robust and fast numerically controlled lathe with a slant bed and flat guides, compact in size. It is equipped with a FANUC 21-T CNC control unit with LCD monitor, year of manufacture 1998, and complies with CE standards. Rcjdpjx Nqliefx Afhod Main features: Max. swing over bed: 460 mm Max. turning diameter: 280 mm Max. turning length: 500 mm Max. bar capacity: 51 mm Spindle nose: ASA 6” Spindle: max. rotation speed 4,500 rpm Spindle motor power: 11 kW Turret: 10 positions Turning/boring tool size: 25×25 mm / Ø40 mm Tailstock: quill diameter 65 mm, quill stroke 80 mm – MT4 Machine weight: 3,500 kg The equipment includes the tailstock with programmable quill, tool presetting system, 3-jaw hydraulic chuck (which will be supplied in place of the manual chuck), and operating and maintenance manuals.

See details

Listing

MOVING COLUMN BORING MACHINE PAMA FT 140

Montichiari

6,753 km

MOVING COLUMN BORING MACHINE
PAMAFT 140

Call

Condition: used, travel distance X-axis: 7,000 mm, travel distance Y-axis: 4,000 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 1,200 rpm, feed rate X-axis: 900 m/min, Ø quill: mm. 140 Spindle taper : ISO 50 travel X : mm. 7000 travel Y: mm. 4000 Cross travel Z RAM: mm. 900 Quill travel W: mm. 900 Rotary table: mm. 1800x1800 load admitted on table: Ton. 10 Table rotation: °.pos. Table long.travel (AxisV): mm. 1500 Rcodpfx Afot Rkcushsd Spindle speed : RPM. 1200 Spindle motor: Kw. 70 CNC ECS 2101 N°2 milling square heads N.2 Floor plate 6000x2000

See details

Listing

Thread-Worm-Grinding-Machine REISHAUER UL 900

Malsch

6,905 km

Thread-Worm-Grinding-Machine
REISHAUERUL 900

Call

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 Rcjdeyb S Rijpfx Afhsd workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

See details

Listing

Band Saw - Automatic - Horizontal KASTO HBA 520 AU

Bühl

6,917 km

Band Saw - Automatic - Horizontal
KASTOHBA 520 AU

Call

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm length of rest piece min/max 10 / 100 mm Rcodpfx Afewm Rm Iohjd cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

See details

Advertise here