Used 3 Cantilever Arm Racks An And Double Sided for sale (84,272)
Sort results
- Lowest price Highest price
- Newest listings Oldest listings
- Shortest distance Farthest distance
- Newest year of manufacture Oldest year of manufacture
- Latest update Oldest update
- Manufacturer A to Z Manufacturer Z to A
- Relevance
- Lowest price
- Price
- Highest price
- Price
- Newest listings
- Release date
- Oldest listings
- Release date
- Shortest distance
- Distance
- Farthest distance
- Distance
- Newest year of manufacture
- Year of construction
- Oldest year of manufacture
- Year of construction
- Latest update
- Update
- Oldest update
- Update
- Manufacturer A to Z
- Manufacturer
- Manufacturer Z to A
- Manufacturer
- designation from A to Z
- Description
- designation from Z to A
- Description
- Model from A to Z
- Model
- Model from Z to A
- Model
- Lowest reference
- Ref.No.
- Highest reference
- Ref.No.
- Shortest runtime
- Runtime
- Longest duration
- Runtime
- Relevance
- Relevance
Listing
Goch
7,060 km
Working platform semitrailer
KÄSSBOHRERPlattform Leicht MEGA SPS 3 BordwändeAUCH MIETE
Call
Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately
NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3
# Empty weight 6,100 kg
# Fifth wheel load 15,000 kg
# Fifth wheel height: 980mm
# BPW axles with disc brakes
# 1st axle as lift axle
# Jost support feet 24t
# Wabco 4S/2M EBS with RSS
# 2 x 7 and 1 x 15-pin electrical connections
# 24V lighting system Aspöck
# Tires 6 x 445/45 R19.5 branded tires on steel rims
# 2 plastic wheel chocks
Equipment:
# 30 mm hardwood floor
Gsdpfovm Nm Iex Anzsbn
# Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon)
# 2 stainless steel tool boxes in the direction of travel right & left
# 6x2 Jost container locks, retractable
# Stake holder mounted on front wall + 20 stanchions (1500 mm)
# 4 rows of stake pockets
# 10 x 2 stake pockets in the frame
# 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each
# Side walls 600mm high & removable including depot under the vehicle
# Chassis KTL coated and painted in RAL 3020
# Front wall RAL 3020
----Errors, changes and prior sale reserved!
Location: KTH-Trailer GmbH in Goch
Listing
Schiedam
7,180 km
Tanker truck
ScaniaP 380 – 10x4 blow and suck truck
Call
Condition: used, mileage: 5,22,000 km, power: 279 kW (379.33 HP), first registration: 09/2009, fuel type: diesel, tire size: 385/55 R 22.5, axle configuration: 10x4, wheelbase: 7,730 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: other, total length: 10,000 mm, total width: 2,550 mm, Year of construction: 2009, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, = Additional options and accessories =
- Aluminum fuel tank
- Digital tachograph
- Air suspension
- PTO (Power Take-Off)
- Radio/CD player
- Sun visor
= Further information =
Gbedjy Rtvtspfx Anzon
Technical information
Number of cylinders: 6
Engine displacement: 11,705 cc
Axle configuration
Axle 1: Tire size: 385/55 R 22.5; Steered; Left tire tread: 35%; Right tire tread: 35%; Suspension: Leaf spring
Axle 2: Tire size: 385/55 R 22.5; Steered; Left tire tread: 50%; Right tire tread: 50%; Suspension: Leaf spring
Axle 3: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 40%; Left outside tread: 40%; Right inside tread: 40%; Right outside tread: 40%; Reduction: single reduction; Suspension: Air suspension
Axle 4: Tire size: 295/80 R 22.5; Twin tires; Left inside tread: 30%; Left outside tread: 30%; Right inside tread: 30%; Right outside tread: 30%; Reduction: single reduction; Suspension: Air suspension
Axle 5: Tire size: 435/50 R 22.5; Left tire tread: 25%; Right tire tread: 25%; Suspension: Air suspension
Weights
Unladen weight: 17,860 kg
Payload: 32,140 kg
Gross vehicle weight: 50,000 kg
Condition
Damages: none
Listing
Dnipro
4,979 km
Roll forming line
LLC EvolutionerF3 machine with length device and knife
Call
Condition: new, Year of construction: 2025, Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies.
Gbsdpfeh Aw Rnjx Anzsn
Bfywfrix
The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another.
The F3 machine can work with panels from 200 to 700 mm wide.
It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc.
Maximum metal thickness for work – 0.8 mm.
Standing seam metal roof machine F3 can go in a standard set, and with additional accessories providing additional functionality of the machine and simplifying the work process. As additional options, we offer a floor decoiler, which can be used directly on the working site thanks to its lightweight and small size, so you can put the coil to the decoiler and feed it to the machine. As an optional extra, you can purchase a length-measuring device to roll roofing panels the same length and in semi-automatic mode, without marking them with tape and ruler. Using those accessories, you can really save your time and make your work more accurate. With the length measuring device, our customers very often buy a cross cutting knife in order to cut the panels of the desired length from the coil.
As extra options, we also offer ribbed panels rolls to form standing seam panels with ribs and providing additional roofing system rigidity. You can use the machine with or without rolls. Extra rolls for radius panels production allow you to produce panels with a big bending radius, which allows you to use them for various structures, such as hangars, etc.
We have a ready-made solution for your business for hangars roofing buildings production.
For protection against various damages, we offer the use of a top cover, which prevents foreign objects from getting inside the machine and makes the working process of the machine safer - roll forming roof panel machine F3 with top cover
For closing the standing seam lock our customers can use special standing seam roofing tools
While installing roof panels, roofers use special fixation elements – sliding clips, so we offer punching presses for their production - sliding clip formers
Thus, using a standing seam metal roof machine F3, our customers and partners can produce efficient standing seam roofing panels, and with additional accessories can make this process more convenient and faster.

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month
Listing
Rīga
6,003 km
Single head cutting machine
Fom INDUSTRIEPANDA 300 with DIGISTOP and DIGIBAR
Call
Condition: new, Year of construction: 2025, Single head sawing machine for aluminium FOM INDUSTIRE PANDA 300 ECHO with measuring system DIGISTOP 4m, measuring caliber DIGIBAR 3,3m and inlet conveyor PORTER 4,2m
Machine in stock
Configuration:
Single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO:
- Tungsten carbide saw blade Ø 300 mm
- Hydro-pneumatic feed of saw blade
- Spray mist blade lubrication system
- Cutting area guard kit
- Two vertical vices
- Two horizontal vices
- Set up for the extraction of chips and fumes
Electronic measuring system DIGISTOP 4m:
- Min. cutting length 0 mm, maximum 4000 mm
- Friendly software using icons and function keys
- Accuracy 0.1 mm
- Manual piece execution
- Measurement list editor
- Editor of measurement received by radio or net
- Removal of piece after every cut
- Visualization of reference for each measurement
- Roller width 200 mm
Wireless electronic measuring bar DIGIBAR 3,3m
- Minimum measure 140 mm
- Maximum measure (without extension) 1600 mm
- Maximum measure (with extension) 3300 mm
- In set includes two extensions: 1400 mm and 1700 mm
Gsdpfx Aowh Rlgsnzobn
- Accuracy 0.1 mm
- Weight 2190 gr
- Power supply 4 recharg. batt. AAA
- Absolute measuring system (no recalibration required)
- 2 LCD lines 16 characters
- Industrial keyboard 6 keys protected
- 2 LED signal for immediate display of the state of instrument
- Ergonomic Handle with a simple use button for measurement capture
Inlet roller conveyor PORTER 4,2 m:
- Loading capacity Kg. 10 per meter
- Plastic rollers, width 200 mm
- Vertical plastic rollers
Listing
București
5,507 km
VTL SC 14 cc
RomanianVTL SC 14 and SC 13
Call
Condition: ready for operation (used), VTL SC 14 cc
Chuck diameter 1200 mm
Max turning 1400 mm
Godeg D Hv Ispfx Anzsbn
Max height of workpiece 1000 mm
Aprox weight 16.1. to
Listing
Turkey
4,879 km
Sany SY35 Ditch Cleaning and Trapeze Bucket
SanySY35 Ditch Cleaning and Trapeze Bucket
Call
Year of construction: 2023, condition: new, Field of application: Construction
1. Trapeze Bucket (or Trenching Bucket):
Purpose: As the name suggests, a trapeze bucket is primarily used for digging trenches. These trenches are often required for laying utilities such as water, gas, or electrical lines.
Design: A trapeze bucket is typically narrower than standard digging buckets, and it may have a trapezoidal shape to create trenches of a specific width and depth.
Advantages:
Precision: Designed for accurate and clean trenching, reducing the need for manual labor to finalize the trench.
Efficient: Enables faster excavation, especially for straight-lined trenches.
Versatile: Some are designed with replaceable teeth or edges, making them suitable for various ground conditions.
2. Ditch Cleaning Bucket (or Grading Bucket):
Purpose: This bucket is used for leveling, grading, cleaning ditches, removing debris, and back-filling trenches.
Design: Typically broader and flatter than standard digging buckets, a ditch cleaning bucket might also have a smooth edge to ensure a clean finish.
Advantages:
Wide Reach: Its broader design means it can cover larger areas in one sweep, making grading and leveling tasks quicker.
Gbodjn Tm Ngopfx Anzen
Smooth Finishing: The flat base allows for a smoother finish on surfaces, which is especially important when preparing for foundations or paving.
Versatility: Excellent for landscaping projects, creating drainage slopes, or even spreading materials evenly across a site.
Conclusion:
The right bucket can make all the difference in a mini excavator's efficiency and the quality of its work. By understanding the specific functions and advantages of the trapeze bucket and ditch cleaning bucket, operators can ensure that they are using the right tool for the job, optimizing productivity and outcomes.
Listing
Turkey
4,879 km
Komatsu PC450 Boom-Arm Second Hand
KomatsuPC450 Boom-Arm Second Hand
Call
Condition: used, Layout: Backhoe
Selling price: € 3.250, US$ 3.443
KOMATSU PC450 Second Hand BOOM-ARM
Gbsdpfx Anjpa Rraszen
The boom and arm are for sale as we have converted the machine into a demolition machine.
Boom Length: 7060mm
Boom Price: €8250
Arm Length: 3380mm
Arm Price: €3250
Bucket Blade Length: 1600mm
Bucket Price: €4500
Bucket pins, link pins are also for sale separately.
The machine will be ready after 2 months with the 27 meters demolition boom-arm-shear. For discounted price and detailed information, please contact us. The demolition machine price will change after 2 months :)
Listing
Susuz
4,879 km
Crawler excavator
VolvoEC350 Long Reach Boom-Arm Manufacturing
Call
Condition: new, We manufacture long reach boom-arm sets for all machines
Godpjw Sfdqjfx Anzobn
For inquiries please contact us
Listing
Turkey
4,879 km
Komatsu PC350 Demolition Boom-Arm Manufacturing
KomatsuPC350 Demolition Boom-Arm Manufacturing
Call
Year of construction: 2023, condition: new, Layout: Shears
Attachment suited for: Construction machines
Warranty: 12 months
As an industry-leading manufacturer, we take pride in offering our high-reach demolition boom-arms designed for excavators, enhancing their capability to reach and demolish structures at towering heights. Our high-reach boom-arms deliver unmatched power and precision, making them an indispensable tool for tackling complex, large-scale demolition tasks. Constructed from robust materials and engineered with an eye for detail, our high-reach boom-arms ensure superior durability, even under substantial impacts and intense vibrations, providing operators with the confidence and control necessary for safe, effective demolition.
Godpfen Tm Erox Anzjbn
For detailed information and get offer please contact us
Listing
Turkey
4,879 km
Hitachi ZX350 Long Reach Boom-Arm Manufacturing
HitachiZX350 Long Reach Boom-Arm Manufacturing
Call
Year of construction: 2023, condition: new, Field of application: Construction
When we manufacture long reach boom arms, we consider maintaining stability and balance, even when fully extended. We are usually use Strenx steel from SSAB and can be configured with a range of buckets, grapples, and other tools to perform specific excavation tasks.
Machine model in the photo: Hitachi ZX350
Total Length: 18meters
Gsdpfx Asn Tm Ifonzebn
Bucket Capacity: 1m^3
For detailed information and to get an offer, please contact us
Listing
Geffen
7,106 km
BE semi-trailer
VeldhuizenP47-3 P47-3 BE oplegger+ Dhollandia klep 1.000 kg
Call
Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 3,990 kg, first registration: 08/2021, loading space length: 7,550 mm, loading space width: 2,150 mm, loading space height: 2,280 mm, total length: 7,700 mm, total width: 2,200 mm, total height: 3,400 mm, suspension: air, wheelbase: 4,350 mm, color: white, Year of construction: 2021, Equipment: tail-lift, Suspension: air suspension
Max. rear axle load: 3990 kg
Empty weight: 1.860 kg
Carrying capacity: 3.640 kg
GVW: 5.500 kg
Tail lift: Dhollandia, 2497 kg
Gbodoy Exl Aopfx Anzen
APK (MOT): tested until 08/2026
Registration number: OS-83-VZ
Driving through higth 222 cm
2 Pieces in stock
2 Rails
Rollstops
Listing
Coevorden
7,021 km
Lifting equipment for sheetmetal
Impact V-300kgV-3,6, and 800 kg
Call
Condition: new, Year of construction: 2026, functionality: fully functional, lifter boy for loading sheet metal on laser machines
easy operation ( vacuum pump are in the control unit)
no cable around the vacuum lifter by loading laser machine
continu vacuum protection
vacuum pomp work on battery and they are in operation unit
battery loader included.
300, 600 and 800 kg
save operation
include battery loader ( buster type )
include mounting manual.
CE
complete pack in wooden transport box
we can deliver till 6 meter long scheetmetal.
Gbedpoytcnvofx Anzon
price is for 300 kg lifter
600 kg lifter plus 300 euro
800 kg lifter plus 600 euro
=>direct from stock.
Price is EXW (Stock Europe), Include loaded on truck.
Transport, installation, commissioning, training, and yearly service contracts
are available upon request for an additional fee.
Installation and training is always done by our high qualified
Service team in 3 locations in Europe.
Netherlands, Germany, Romania.
Listing
Berlin
6,571 km
Panel van
mercedes-benzVito 110 CDI KASTEN EXTRALANG 3 SITZE,STANDHZ,SH
Call
Condition: used, mileage: 38,800 km, power: 75 kW (101.97 HP), first registration: 01/2021, fuel type: diesel, empty load weight: 1,850 kg, overall weight: 2,800 kg, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 5,370 mm, construction height: 1,910 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, sliding door, soot filter, * Appointment scheduling for consultation and test drive = shorter waiting times:
* Time is precious, and you shouldn’t spend it waiting. Therefore, we kindly ask you to arrange a consultation or test drive appointment by phone.
* Service booklet
* Non-smoker
* This vehicle features a well-maintained service record at Mercedes-Benz
* Last service performed at 22,982 km
TRANSMISSION / CHASSIS
* Engine 1.7 Ltr. – 75 kW CDI KAT
* Extra-long wheelbase
* Panel van
* 6-speed manual transmission – FSG
APPEARANCE
Gbedpjy Ac Ddofx Anzsn
* Factory-tinted windows
* Seat belt system with warning indicator (passenger side)
* Seat belt system with warning indicator (driver side)
* Seat belt system with warning indicator (driver/passenger side)
* Body color: arctic white
LIGHT & VISIBILITY
* Daytime running lights
* Windscreen wipers with rain sensor
* Automatic headlight activation
* Rear door/tailgate window with wiper/washer system
* Exterior mirrors, both aspherical
* 3rd brake light
* Interior rear-view mirror
ENTERTAINMENT
* DAB tuner (digital radio reception)
* Audio navigation system Audio 40 (DAB+, Bluetooth, USB)
* Multifunction steering wheel incl. trip computer
* Instrument cluster with pixel matrix display
* Radio generation 2
* Preparation for Remote Services Plus
* Two-way speakers
ASSISTANCE SYSTEMS AND SAFETY
* Parktronic system (PTS)
* Driver assistance system: Attention Assist (drowsiness detection sensor)
* Cruise control system (cruise control)
* Engine start/stop system
* Anti-theft alarm system
* Brake assist
* Mercedes-Benz emergency call system
* Adaptive brake
* Driver assistance system: Breakdown management
* Hill-start assist
* Driver assistance system: Crosswind assist
* Pedestrian protection
* Live traffic information
* Maintenance interval indicator Assyst
COMFORT
* Additional heating (hot water)
* Driver's seat heated
* Steering wheel (mechanically adjustable steering column)
* Upholstery: Caluma black fabric
* Trim for window pillars
* Passenger seat as twin seat
* Sliding door, load/passenger compartment on the right
* Comfort driver's seat
* Driver's seat with lumbar support
* Ambient lighting in passenger/load compartment
* Lockable glove compartment
* Automatic climate control (Tempmatik)
* Heat-insulating glazing
* Rear cup holders
MISCELLANEOUS
* Full partition with sliding window
* Partition wall with window
* Sidewall trim (plywood) in load/passenger compartment
* Body/Superstructure: Standard panel van
* Semi-high hardboard trim in load/passenger compartment
* Fuel tank: main tank 57 L
* Floor covering: TPO in passenger compartment
* Rear door without glazing (opening angle 270 degrees)
* Lashing rails in the load compartment – sidewall at belt rail
* BlueEfficiency Package
* Mounting rails for roof rack
* Windscreen with integrated antenna
* Roof light in load compartment
* Lashing rails in load compartment – sidewall at roof frame
* Low emissions according to Euro 6d-TEMP
* Terminal strip for electrical connections (driver’s seat box)
* Outside temperature display
* Passenger-side grab handle
* Load anchoring/lashing eyes
* Particulate filter
* Fixing points in roof frame
* Fleece battery 92 Ah
* And much more
* The above information is provided without guarantee. It does not constitute a guaranteed specification. Subject to errors and prior sale.
* Our services:
* Financing possible even without down payment
* Registration service
* Trade-
Listing
Berlin
6,571 km
Panel van
mercedes-benzVito 110 CDI KASTEN 3 SITZE,KLIMA,AHK,1.HAND,SH
Call
Condition: used, mileage: 86,958 km, power: 75 kW (101.97 HP), first registration: 01/2020, fuel type: diesel, empty load weight: 1,800 kg, overall weight: 2,800 kg, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 4,895 mm, construction height: 1,910 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, soot filter, trailer coupling, * Appointment scheduling for consultation and test drive = shorter waiting times:
* Time is valuable, and you shouldn’t spend it waiting. Therefore, we kindly ask that you schedule an appointment by phone for a consultation or a test drive.
* Service booklet
* Non-smoker
* This vehicle has a well-maintained service history with Mercedes-Benz
* Last service at 73,095 km
TRANSMISSION / CHASSIS
* Engine 1.7 L – 75 kW CDI CAT
* Panel van
* 6-speed manual transmission
EXTERIOR
* Seat belt system with warning (passenger side)
* Chrome package
* Seat belt system with warning (driver/passenger side)
* Paint: arctic white
LIGHT & VISIBILITY
* Daytime running lights
* Windscreen wipers with rain sensor
* Automatic headlight activation
* Exterior mirrors, both, aspherical
* Third brake light
ENTERTAINMENT
* Multifunction steering wheel incl. trip computer
* Audio system Audio 10 (radio with CD player)
* Instrument cluster with pixel-matrix display
* 2-way speakers
ASSISTANCE SYSTEMS AND SAFETY
* Driver assistance system: Attention Assist (fatigue detection sensor)
* Cruise control
* Start/stop engine function
* Tire pressure monitoring system
* Brake Assist
* Mercedes-Benz emergency call system
* Adaptive Brake
* Assistance system: Breakdown management
* Hill start assist
* Side wind assist
* Maintenance interval indicator Assyst
COMFORT
* Seats in cab: driver's seat heated
* Steering wheel (column manually adjustable)
* Window pillar trim
* Seats in cab: passenger bench seat (two-seater)
* Sliding door, load/passenger area right
* Comfort driver's seat in cab
Gjdeyz H T Tepfx Anzsbn
* Driver’s seat with lumbar support
* Comfort lighting in passenger/load compartment
* Lockable glove compartment
* Air conditioning (Tempmatik)
* Heat-insulating glazing
* Rear cup holder
MISCELLANEOUS
* Tow bar: fixed ball head
* Full bulkhead in cargo area
* Body: standard panel van
* Body: compact
* Half-height hard fiber lining in load/passenger compartment
* Fuel tank: main tank 57 L
* Wooden floor in cargo area
* BlueEfficiency package
* Mounting rails for roof rack
* Windscreen with antenna
* Ceiling light in cargo area
* Lashing rails in cargo area: side wall at roof frame
* Euro 6d-TEMP emissions standard (low emissions)
* Fuel filter with water separator
* Permissible gross weight 2.80 t
* Outside temperature display
* Grab handle, passenger side
* Load securing / lashing eyes
* Particulate filter
* PTC heater
* Mounting points in roof frame
* Registered as a truck
* Fleece battery 92 Ah
* And much more
* Information without guarantee. Does not represent a guaranteed feature. Subject to errors and prior sale.
* Our services:
* Financing available with or without down payment
* Registration service
* Trade-in of your old passenger car
* Delivery available
* Tire service; winter and summer tires available at extra cost
* We also speak several languages: English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak
* We look forward to your visit!
Listing
Pančevo
5,940 km
Glass cutting desk
LisecGFB-60/30RE-S and VB-45
Call
Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table.
Gbsdpex Tq S Defx Anzjn
Listing
Izdebnik
6,088 km
Wide belt sander
SCMSANDYA 10 - 3 AGREGATY
Call
Condition: excellent (used), working width 1100 mm
calibrating unit with metal roller
calibrating unit with rubber roller
combination unit with rubber roller and pad
activation of machine functions from the control panel
pneumatic oscillation
pneumatic belt tensioning
Gsdpfx Ansyw N R Tszebn
motor power: 9KW and 9KW, total power 18.5 KW
two feed speeds for the conveyor
material thickness gauge
two feed speeds for sanding belts
emergency stop switch
Listing
Essen
7,003 km
Working platform semitrailer
ES-GE3-Achs-Sattelanhänger, Bordwände
Call
Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website.
Excerpt from the equipment list. Full specifications available on request.
Chassis:
* Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads.
Coupling device:
* Fifth wheel plate with 2-inch kingpin
Underrun protection:
* According to EC regulations, bolted design
Side guard:
* According to EC regulations
Landing legs:
* 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel
Gbjdpjy Auhzefx Anzjn
Axles:
* 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm
* Air suspension operated via hand control valve with stop function
Steering:
* Last axle forcibly steered by linkage
Axle lift:
* First axle liftable, with fully automatic, load-dependent lift control
Brake system:
* Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle
* Wabco brand
Tyres:
* Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer)
Mudguards:
* According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly
Load securing:
* 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t)
* 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t)
* Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame)
Stake pockets:
* 10 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading platform
* Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm
* Magazine for 20 plug-in stakes on the inside of the front wall
Front bulkhead:
* Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high)
Floor:
* Approx. 28 mm Z-hardwood floor, recessed into the outer frame
Side walls:
* 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes
* Side wall and stake magazine under the chassis
* Left and right insertion rails for side walls and stakes
Lighting system:
* According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights
* 1x 15-pin and 2x 7-pin plug sockets on front cross member
Equipment:
* Two wheel chocks with holders
* Warning signs according to ECE 70
* Work spotlight on lamp bracket (operated via reverse gear)
* Holder for rotating beacon at rear, incl. beacon
* 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm
Paintwork:
* Chassis and front bulkhead sandblasted, primed and coated in a single colour
* Chassis: hot-dip galvanised + RAL colour of choice
* Front bulkhead: RAL colour of choice
* Side walls: anodised aluminium
* Top stakes front bulkhead: hot-dip galvanised
* Hubs: KTL blac
Auction
Auction ended
Nordrhein-Westfalen
7,000 km
Single-screw extruder
HussmannES35 x 30D + Saw and Extractor
Year of construction: 1998, operating hours: 297 h, condition: ready for operation (used), functionality: fully functional, saw blade diameter: 200 mm, rotational speed (max.): 3,000 rpm, screw diameter: 35 mm, machine/vehicle number: E0195/10, No reserve price – guaranteed sale to the highest bidder!
Gjdpfxoyrmzqo Anzsbn
Single-screw extruder with only 297 operating hours, including cutoff saw and haul-off unit!
Hussmann ES35 x 30D
TECHNICAL DETAILS
Screw diameter: 35 mm
Length: 30D
MACHINE DETAILS
Motor power: 16 kW
Operating hours: 297 h
Cutoff Saw
TECHNICAL DETAILS
Three-phase motor speed: 3,000 rpm
Three-phase motor output: 0.55 kW
Saw blade diameter: 200 mm
Haul-off Unit
TECHNICAL DETAILS
Haul-off speed: 20/30/40/50/60 m/min
Haul-off force: 11,700 / 7,800 / 5,800 / 4,700 / 3,900 N
Contact length: 800 mm
Max. belt width: 160 mm
Max. profile height: 160 mm
MACHINE DETAILS
Drive power: 2 - 5.6 kW
Weight: 800 kg
EQUIPMENT
Complete electrical and electronic control system with remote control box
Digital speed display
Ammeter
10-step helical potentiometer
Listing
Berlin
6,571 km
Panel van
mercedes-benzCitan 110 CDI KASTEN 3 SITZE,STANDHZ,KAMERA,1.HD
Call
Condition: used, mileage: 79,711 km, power: 70 kW (95.17 HP), first registration: 02/2023, fuel type: diesel, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, parking heater, sliding door, soot filter, traction control, * Appointment scheduling for consultation and test drive = shorter waiting times:
* Time is valuable and you shouldn't spend it waiting. For this reason, we kindly ask you to arrange an appointment by phone for consultation or a test drive.
* Service booklet
* Non-smoker vehicle
* This vehicle comes with a well-maintained service history with Mercedes-Benz
* Last service carried out at 61,839 km
TRANSMISSION / CHASSIS
* Panel van
* 6-speed transmission
* Engine: 1.5 L - 70 kW CDI CAT
APPEARANCE
* Equipment package: designo interior
* Design and equipment line PRO
* Dashboard in black textured plastic
* Interior trim: high-gloss black
* Seatbelt warning system, driver/passenger side
* Chrome interior package
* Roof railing preparation
* Paint color: arctic white
* Sliding door rail cover in vehicle color
* Grab handle strip in black textured finish
LIGHTING & VISIBILITY
* Rain/light sensor
* LED fog lights
* LED lighting in cargo area
* LED interior lighting
* Front LED interior lighting
* Exterior mirror indicators in halogen technology
ENTERTAINMENT
* MBUX multimedia system with DAB
* Communication module (LTE) preinstallation for Mercedes me connect
* MB audio system with DAB
* Mercedes me connect
* Digital radio (DAB)
* Smartphone integration
* Multifunction steering wheel
* Combination instrument cluster with color display
* Digital radio (DAB) preinstallation
* Preinstallation for Remote Service Plus
ASSISTANCE SYSTEMS AND SAFETY
* Reversing camera
* Parktronic system (rear)
* Driver assistance system: Attention Assist (drowsiness detection sensor)
* Start/stop system
* Cruise control
* Driver assistance system: Active Brake Assist
* Mercedes-Benz emergency call system
* Traction control system (ASR)
* Driver assistance system: Hill Start Assist
* Thorax side and window airbags in the front
* Parking brake
COMFORT
* Heated driver seat
* Twin passenger seat
* Basic interior trim
* Lumbar support in driver's seat
* Right side sliding door to load/passenger compartment
* Plastic flooring in cargo area
* Air conditioning
* Rear wing doors without windows (opening angle 180 degrees)
* Lockable glove compartment
* Heat-insulating glazing
* Washer fluid reservoir
Gbsdsyy Hw Njpfx Anzon
* Plastic flooring in front passenger compartment
OTHER
* Continuous partition
* Body/build: box van
* Low emissions according to Euro 6d standard
* Fuel filter with water separator
* Diesel particulate filter
* Weight variant: 2,027 kg
* and much more
* The above information is provided without liability. It does not represent an agreed condition. Subject to error and prior sale.
* Our services:
* Financing available also without down payment
* Registration service
* Trade-in of your old car
* Delivery available
* Tyre service, winter and summer tyres available at extra cost
* We also speak several languages:
* English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak
* We look forward to your visit!
Listing
Heerhugowaard
7,149 km
Cap sorter and feeder
Pano verschlußMFH 3000 cap sorter and feeder
Call
Condition: ready for operation (used), Suitable for twist-off caps
Suitable for screw caps
Capacity: up to 30,000 caps per hour
Godpjy A Tk Iofx Anzsbn
Magnetic elevator belt
Listing
Roosendaal
7,178 km
Engine
KubotaV3307Cr-T. Brand new and complete. Tier 4 EPA a...
Call
Condition: new, Year of construction: 2025, power: 55 kW (74.78 HP), fuel type: diesel, Family name: PKBXL03.3E1D
Approximate weight in kg: 354 kg
Dimensions LxWxH: 100 x 80 x 110 cm
Gbedpfey Anakox Anzen
Trust Seal
Dealers certified through Machineseeker

Listing
Roosendaal
7,178 km
Engine
KubotaV3307Cr-T. Brand new and complete. Tier 4 EPA a...
Call
Year of construction: 2025, condition: used, New: Yes
Godpjy Am U Tjfx Anzebn
Power: 6 kW (8 HP)
Listing
Roosendaal
7,178 km
Engine
Kubota3307 DI-T, brand new and complete
Call
Year of construction: 2025, condition: used, New: Yes
Power: 4 kW (5 HP)
Gbsdpfx Ajy Am Tponzon
Listing
Hungary
6,062 km
Cut-to-length and slitting line
OCEVICTL and slitting line 2000x10mm x30t
Call
Condition: used, OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794)
OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794) is perfect machine for both tasks: cut-to-length cutting and longotudinal cutting of coil metal into strips with 2000mm coil width, 10mm maximum metal thcikness and 30t coils
Gjdpfstvdy Ijx Anzjbn
OCEVI Combinated cut-to-length and slitting line 2000x10mm x30t (A3794)
Composition of the line:
1. Stocking ramp
2. Loading cradle 30t
3. Double cone uncoiler
4. Hydraulic peeler table
5. Arm with roll-press roller-bridge structure
6. Assembly including pinch-roll and pre-straightener
7. crop shear
8. tilting roller conveyor on pit
9. slitting shear shaft diam. 200mm
10. mobile side guide
11. tensioning rollway
12. side trim rewinder
13. burr crusher
14. recoiler + unloading crandle 30tons.
15. tensioning rollway to leveler
16. unger leveler
17. guillotine flying shear
18. pinch-roll for sheet ejection
19. stacker
20.roller conveyor for stack ejection 12mt.
21 hydraulic control unit
22. electrical equipment
23. tooling
Listing
Izdebnik
6,088 km
Wide belt sander
SCMSANDYA 3
Call
Condition: like new (used), working width 950 mm
calibrating unit with metal roller
combination unit with rubber roller and automatically adjusted sanding pad
star-delta start
pneumatic oscillation controlled by photocells
two feed speeds of the conveyor
motor power 7.5 kW
Gbedpfx Anjyrrniezon
year of manufacture 2000
power supply 400V
weight 976 kg
We make it easier for you to find: "3 cantilever arm racks an and double sided"
You will receive new offers immediately and free of charge via e-mail
You can easily terminate the search request at any time
Used 3 Cantilever Arm Racks An And Double Sided (84,272)
Search Machineseeker now with more than 2,00,000 used machines:Browse through the most popular machine descriptions:
- 3 Axis
- 3 Axis Digital Display
- 3 Axis Lathe
- 3 Axis Machining Center
- 3 Stacking Boxes
- Cantilever Arm
- Cantilever Arm Shelf
- Cantilever Arm Shelf Long Good Shelf Usable Depth 800 Mm
- Cantilever Rack Shelf
This may be of interest to you

Get information now
+44 20 806 810 84
+44 20 806 810 84
List now
*per listing / month



















































































































































































































