Used Abex Denison for sale (14)

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump Model No.: 013.44186 Dcedpfx Aeb A Ncvjptol -Toothed shaft mounting: Ø 44 mm -Dimensions: 470/260/320 mm -Weight: 130 kg

Condition: used, We are selling a Hydraulic unit with a variable Denison pump, it is a used machine in a perfect condition, tested to operate up to 275 bar, electric motor Sever 37kW and 1475 revolutions per minute. The hydraulic pump capacity is 100 l/min, and the oil tank capacity is 375 l. According to factory specifications, the maximum hydraulic pump pressure is 350 bar. Dcsdpfoy Nlpijx Aptel The machine can be seen and tested prior to the purchase.

Condition: used, Used hydraulic pump system with 4 pumps and an approximately 200-liter reservoir, including a collection basin. Dcjdpfjzi Sn Aox Aptjl

Condition: used, feed pressure / bar liter capacity / l power capacity 7,5 kW Dcodpszcq I Asfx Aptol

Condition: used, functionality: fully functional, HYDRAULIC VALVE Dcsdpfx Aoxzpvboptjl All our items have been inspected by the technical department.

Condition: good (used), Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Promecam, hydraulic control block from press brake Promecam STPC 250 40 121 Dsdpfxohqifys Aptscl -Control valve: Abex Denison S16-92489 / S16-39303 / S26.20456 2-way cartridge valves: Bosch Individual components: type / number see photos -Dimensions: 875/560/H400 mm -Total weight: 204 kg

Condition: used, feed pressure / bar liter capacity / l power capacity 17,3 kW Dodpfxey S D D Rj Aptjcl

Condition: used, connected load frequency / V weight / kg Dcedpfxezcq D Rs Aptol range L-W-H / mm

Condition: good (used), WF HHP 625 – Horizontal Press Year: 2006 Manufacturer: WF Maschinenbau u. Blechformtechnik GmbH & Co KG Germany Machine Model: WF HHP 625 Machine Type: Horizontal Hydraulic Press Technical Specifications: Maximum workpiece diameter: 625 mm Minimum workpiece diameter: 350 mm Maximum workpiece length: 325 mm Maximum press stroke: 750 mm Maximum press force: 2000 kN Siemens 840D control system Parker hydraulic components Hydraulic oil tank capacity: approx. 800 liters Required cooling water for hydraulic system: approx. 1000 l/h Cooling water inlet temperature: max. 25°C Air supply connection: 6 bar / ½” Ambient operating temperature: 10°C – 40°C Dcjdpfxezb Il No Aptsl Hydraulic Equipment: Main Hydraulic Motor: Manufacturer: Blumenbecker Type: 14BG 207-4AA 200L Power: 30 kW Voltage: 400V / 50Hz Speed: 1465 rpm Secondary Hydraulic Motor: Manufacturer: Blumenbecker Type: 7AA 132 S-4 Power: 5.5 kW Voltage: 400V / 50Hz Speed: 1450 rpm Hydraulic Pump: Manufacturer: Parker Type: PV080R1K1T1NSLD Internal Gear Pump: Manufacturer: Denison / Parker Type: T6CMYR20-1-R_00C1 Flow rate: 93 l/min at 1450 rpm Central Lubrication Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Oil Spray Unit: Manufacturer: Vogel Type: MFE5-BW7+299 Machine Dimensions (Transport Position): Width: approx. 2600 mm Length: approx. 5800 mm Height: approx. 2400 mm Weight: approx. 20,000 kg Additional Information: Hydraulic horizontal press with automated loading/unloading preparation Robot loading interface prepared (robot not included) Transport and lifting drawings available Original manuals and technical documentation included

Year of construction: 2012, condition: like new (used), functionality: fully functional, machine/vehicle number: 4052, Horizontal flow pack packaging machine sold with: - Conveyor - Labeling machine - Inkjet printer Very little used, in excellent condition. ALL WRAP RCN270 packaging machine, year 2012 Dcodjy A Hf Sepfx Aptol Linear speed: up to 25 m/min Bag width: from 30 to 270 mm Bag length: from 50 mm to unlimited Product height: up to 25 mm Production rate: up to 150 cycles/min per lane Reel diameter: 400 mm (standard) AVERY DENISON labeling machine, type ALX 734LH: Print speed: 50 to 400 mm/s Max print width: 104 mm Ribbon width: 20-140 mm Label output: up to 400 labels Label width: 30 to 134 mm Label length: 25 to 225 mm Core diameter: 38, 76, 102 mm Roll diameter: 300 or 400 mm DOMINO A320i inkjet printer Conveyor: Conveyor belt width: 100 mm Conveyor belt length: 2000 mm Dimensions: 2000x595 H 1240 mm

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm Djdpfx Apjzqglljtecl - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition

Condition: good (used), Radial piston pump, hydraulic pump Dcsdpfx Ajb A Ityoptsl -Hydraulic motor -Drive shaft: Ø 22 mm -engine bell -Coupling: Ø 200 mm -Weight: 90 kg

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, FOR SALE — SEMI-AUTOMATIC ANODIZING LINE BY DRABEX PRICE: PLN 1,000,000 Complete semi-automatic aluminium anodizing line for sale. The line is currently switched off and awaiting a buyer. It allows anodizing of aluminium profiles up to 6.20 m in length. Basic information: Tank length: 6.80 m. Tank width: 0.5 m to 1.4 m. Footprint required: 25 m x 10 m. Capacity in 3-shift operation: 2000 m². Line type: semi-automatic anodizing line. Line stations: Nr 1 – Loading and unloading Nr 2 – Hot rinse — 10 m³, gas diaphragm heating, thermally insulated tank Nr 3 – Rinse — 10 m³ Nr 4 – Sealing — 20 m³, tank with bubbler, galvanic filter connected Nr 5 – Rinse — 10 m³ Nr 6 – Rinse — 10 m³ Nr 7 – Rinse or electro-colouring — 20 m³, tank without equipment Dcedpfx Ajzkivgsptol Nr 8 – Rinse — 10 m³ Nr 9 – Rinse — 10 m³, tank with bubbler, spray Nr 10 – Rinse — 10 m³ Nr 11 – Degreasing — 20 m³, gas diaphragm heating, tank with bubbler Nr 12 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 13 – Satin etching — 10 m³, tank with bubbler, diaphragm cooling, electric heating 3 x 5 kW Nr 14 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 15 – Warm rinse — 10 m³, tank with bubbler, electric heating 2 x 5 kW Nr 16 – Rinse — 10 m³, tank with bubbler Nr 17 – Rinse — 10 m³, spray Nr 18 – Deoxidising — 10 m³, spray Nr 19 – Rinse — 10 m³, spray Nr 20 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 22V / 7000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Nr 21 – Anodizing — 20 m³, tank with bubbler, galvanic filter connected, 25V / 8000A rectifier and plate heat exchanger with 150 kW cooling capacity, chiller unit 100 kW Interested buyers are welcome to get in touch. Referral reward: PLN 20,000. I will pay PLN 20,000 to whoever introduces the buyer who finalises the purchase, payable after full payment is received and the contract is signed.

Condition: used, Radial piston pump, hydraulic pump Dedpfob A Iycex Aptecl -Hydraulic motor -Drive shaft: Ø 22 mm -Weight: 26 kg -Dimensions: 330 x 170 x 180 mm