Used Agie Charmilles for sale (68)

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Pedpfxoz Dpapj Alwegt

Condition: excellent (used), Year of construction: 2011, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 304, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, total height: 2,550 mm, total length: 1,900 mm, total width: 1,690 mm, workpiece height (max.): 550 mm, workpiece width (max.): 800 mm, workpiece length (max.): 370 mm, type of input current: three-phase, table width: 400 mm, overall weight: 2,350 kg, table length: 500 mm, empty load weight: 2,350 kg, table load: 500 kg, input voltage: 400 V, tank capacity: 410 l, input frequency: 50 Hz, input current: 10 A, Equipment: compressor, cooling unit, documentation/manual, Very good condition used machine with only 12000 hours working time. Located in Rajkot, Gujarat, India Pgjdez Dpacopfx Alwst

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 395.900.219.1159, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table length: 800 mm, overall weight: 4,150 kg, GF AgieCharmilles FORM E 600 – Die-Sinking EDM Year of manufacture: 2019 Operating hours: approx. 900 h The machine is in excellent, fully functional condition. It has been used only for a very limited number of test and trial operations and has never been used for continuous serial production. Technical specifications: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 600 mm Maximum workpiece size: 1,000 x 700 x 400 mm Maximum workpiece weight: 1,000 kg Positioning resolution: 0.1 μm Best surface finish: Ra 0.2 μm Generator current: 140 A Dielectric tank capacity: 650 l Integrated C-axis Maximum electrode weight on C-axis: 25 kg Maximum C-axis rotation speed: 80 rpm AC FORM HMI with 19" touchscreen ISPG (Intelligent Speed Power Generator) Glass scales on X/Y axes EROWA ITS-50 automatic chuck Electrode changer Fire protection system 6 integrated filter cartridges Power supply: 3 x 400 V, 50/60 Hz Pgjdpfszyn E Eex Alwst Compressed air: 6–8 bar LAN connection: 10/100 Mbit/s Machine dimensions / weight: Machine height: 2,700 mm Machine weight: approx. 4,150 kg The machine is currently located at our facility in Kocaeli, Turkey and is available for inspection. Additional photos, videos, and further information are available upon request.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 396-900-115-0108, workpiece weight (max.): 2,890 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, total height: 2,000 mm, total length: 2,020 mm, total width: 2,050 mm, workpiece height (max.): 250 mm, workpiece width (max.): 900 mm, workpiece length (max.): 680 mm, Ορίστε μια σύντομη, επαγγελματική και περιεκτική περιγραφή που μπορείς να χρησιμοποιήσεις: GF AgieCharmilles CUT 20 P – Wire EDM Machine Well-maintained AgieCharmilles CUT 20 P wire erosion machine in excellent working condition. Features the Performance Package for higher cutting speeds and superior surface finish. Year of Manufacture: 2011 Travels (X / Y / Z): 350 x 250 x 250 mm Max. Workpiece Dimensions: 900 x 680 x 250 mm Pjdpfx Aljzncqlewjgt Max. Workpiece Weight: 400 kg Features: Automatic Wire Threading (AWT), IPG Generator, integrated dielectric filtration unit. Ready for inspection under power.

Year of construction: 2012, condition: used, X: 550 mm, Y: 350 mm, Z: 400 mm, Ra ≈ 0,07 μm Tel Erezyon Pgsdpfx Aozxrh Ujlwot Makinesi (Wire EDM)

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Psdpfxjz A R H Uj Alwjgt Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Regularly maintained Fully functional and ready for use Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 Pjdpjzgu Igofx Alwjgt operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 591.063.050.0035, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, Professional Wire EDM Machine AgieCharmilles CUT 300 (2012) Pjdpowwq S Sofx Alwsgt Premium wire electrical discharge machining center from GF AgieCharmilles, ideal for precision manufacturing, tool & die making, and aerospace applications.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 591.063.002.0050, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,850 kg, table length: 900 mm, Equipment: documentation/manual, The AgieCharmilles CUT 300 Sp is a high-performance and versatile wire EDM, ideal for precision manufacturing of molds, prototypes, and complex components, offering: * extensive spatial travels * large dielectric capacity * ability for taper cutting Pgodpfxjwwrk Ne Alwet * robust CNC control system.

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Pgedpfx Alezbimhswst Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire EDM machine, manufactured in 2014. Travel: X 600, Y 400, Z 450. Table: 750 x 600 mm. Work tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. Pjdpfezd D Nhjx Alwjgt EROWA ITS head. C-axis. 6-electrode changer. EROWA rotating spindle, 1,150 RPM, with a set of collets. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Pgedpfx Ajz Ar Agolwot Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Lot 2 of Auction 3505

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES CUT 2000 AWC WIRE EDM MACHINE (DOUBLE HEAD) MANUFACTURED IN 2012 TRAVEL: X 350, Y 250, Z 256, U, V +- 70 MM MAXIMUM TAPER: 30º/100 MM LINEAR GUIDES AUTOMATIC THREADING AND RE-THREADING DOUBLE HEAD Pgedsy Twkaspfx Alwjt OPTION TO WORK WITH 0.05 AND 0.07 MM WIRES ACCEPTABLE WIRE RANGE: 0.05 - 0.33 MM AGIEVISION 5 GENERATOR SUPERFINISH MODULE FOR FINISHES UP TO 0.05Ra RE-THREADING HEIGHT: 220 MM COILS UP TO 8 KG WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Table size 700 x 480 mm X travel 350 mm Y travel 250 mm Z travel 250 mm U/V travel +/-45 mm Max. taper cut +/-10 degree Max. size of workpieces 820 x 680 x 250 mm Max. weight of workpieces 400 kgs Wire speed 3 - 330 mm/sec Dimensions LxWxH = 2500 x 2500 x 2200 mm Weight ca. 2640 kgs Pgjdpsi A I Hfjfx Alwst Accessories - Coolant tank - Manuals Very little working hours. The machine is like new. There are two identical machines.

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Pjdpjyit Ulofx Alwogt

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 591.063.060.0016, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 600 mm, overall weight: 2,800 kg, table length: 900 mm, Equipment: documentation/manual, The CUT P 550 model from 2017 is an advanced five-axis wire EDM machine, ideal for precise industrial applications: * wide angular range capabilities (up to 30–45°), * efficient and intelligent IPG generator, * accuracy within a few µm, Pgsdpfx Ajwwrtwslwet * advanced automation systems and anti-collision protection, * stable, durable design enabling fully automatic operation.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, AGIECHARMILLES CUT 200 MS WIRE EDM MACHINE, YEAR OF MANUFACTURE 2015 MS MACHINE (TEMPERATURE-CONTROLLED) FIXED TABLE TRAVELS X 350 Y 250 Z 220 U 350 V 250 MM MAXIMUM TAPER 30°/220 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING Pgjdpfx Asy Twf Relwst RE-THREADING HEIGHT 220 MM WIRE SPOOLS UP TO 8 KG RESIDUAL WIRE CUTTER WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: used, Year of construction: 2019, Diesinking / EDM Travel distance X: 900 mm Travel distance Y :700 mm Travel distance Z: 500 mm table size X: 1300 mm table size Y: 900 mm max. workpiece size X: 1814 mm max. workpiece size Y: 1215 mm max. workpiece size Z: 600 mm max. electrode weight: 50 kg max. workpiece weight: 3000 kg Pgedpfszn If Iex Alwjt tool changer: 20 -time generator: 80 Ampere cooler drop tank control Charmilles

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and Pedpfxszcdtxe Alwegt

Condition: excellent (used), Year of construction: 2024, operating hours: 142 h, functionality: fully functional, machine/vehicle number: 395.900.219.1428, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 1,000 kg, total height: 2,858 mm, total width: 1,600 mm, total length: 2,845 mm, table width: 800 mm, table length: 400 mm, workpiece length (max.): 1,000 mm, workpiece height (max.): 400 mm, input voltage: 400 V, overall weight: 4,050 kg, year of last overhaul: 2026, Equipment: documentation/manual, For sale: AGIE CHARMILLES FORM E 600 EDM sinker machine (2024) We offer an AGIE CHARMILLES FORM E 600 EDM sinker machine from 2024, in very good technical and visual condition. Machine specifications: Manufacturer: AGIE CHARMILLES Model: FORM E 600 Year of manufacture: 2024 Type: EDM (electro-discharge machining) sinker machine Equipment: FORM E 600 sinker EDM center - System 3R Macro electrode holder - Automatic 6-position electrode changer - High-speed C-axis - Heat exchanger - EMC/CE compliant version - Set of reference balls - Chiller - SPD surge protection system Podpfx Aozclpnjlwjgt - System 3R 3R-656.21-SP03 measuring probe with a Ø 3 mm measuring ball - System 3R-628.31-S starter kit - Set of transport locks The machine is ready for operation and is an excellent solution for demanding applications in electro-discharge machining. We provide assistance with machine loading. If you have any questions or would like to obtain additional information, please contact us by phone or email.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Psdpfx Asw Hxzmslwogt

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 0044, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, feed length X-axis: 350 mm, feed length Y-axis: 250 mm, feed length Z-axis: 256 mm, The machine was manufactured in 2011, but it was not put into operation and modernized until 2016. As part of this process, an electrical update for the WorkPartner automation system was carried out! TECHNICAL DETAILS Workpiece weight max.: 200 kg Travel range X-axis: 1,800 mm Travel range Y-axis: 2,000 mm Pgsdpfxezf E Nxs Alwjt Travel range Z-axis: 1,100 mm Workpiece height max.: 250 mm Workpiece width max.: 750 mm Workpiece length max.: 550 mm Feed length X-axis: 350 mm Feed length Y-axis: 250 mm Feed length Z-axis: 256 mm MACHINE DETAILS Type of input current: Three-phase Dimensions & Weight Dimensions (L x W x H): 3,000 x 3,760 x 2,455 mm Total weight: 3,700 kg EQUIPMENT Documentation/Manual Cooling unit Note: The operating hours of the machine can be found in the last image.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, AGIECHARMILLES CUT 300 SP WIRE EDM MACHINE, YEAR OF MANUFACTURE 2014 FIXED TABLE TRAVEL: X 550, Y 350, Z 400, U 550, V 350 MM MAXIMUM TAPER 30°/400 MM LINEAR SCALES AUTOMATIC THREADING AND RE-THREADING RE-THREADING HEIGHT 400 MM WIRE SPOOLS UP TO 16 KG RESIDUAL WIRE CUTTER Pgedpfxey Twg Us Alwst WIDE SELECTION OF TECHNOLOGIES FOR THE MOST COMMON MATERIALS/PARTS POSSIBILITY OF PERFORMING A TEST CUT

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on. Pgodpfx Alezcpifewjt

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, AGIECHARMILLES FORM 2000 HP WIRE EDM MACHINE, MANUFACTURED IN 2012 THERMAL STABILIZATION TRAVEL: X 400, Y 300, Z 350 MM EROWA UPC 320 WORKPIECE HOLDER WORK AREA DIMENSIONS: 900 x 630 x 350 MM LINEAR GUIDES AGIEVISION 5 GENERATOR ITS HEAD C-AXIS SUPERFINISH MODULE Pgedpfsy Txk Isx Alwot PREPARED FOR ROBOTIZATION