Used Auerbach for sale (12)

Condition: used, Year of construction: 1992, x-travel 1200 mm y-travel 600 mm z-travel 600 mm Nslovh Ivwohcdwvswd table surface area 1300 x 600 mm spindle taper SK 50 spindle turning speed range 30 - 3500 U/min spindle motor 12 kW max. torque on the spindle 280 Nm feeds longditudinal/cross/vertical 1 - 6000 mm/min rapid traverse 10 m/min feed power 15000 N milling head -swivable +/- 180 ° distance spindle nose and table 58 - 658 mm distance horizontal spindle / table 267 - 867 mm table load max. 2000 kg control HEIDENHAIN control TNC 415 B total power requirement kW weight of the machine ca. 6,8 t dimensions of machine L x W x H 3,94 x 2,67 x 2,23 m Accessories: vertical head swivelling in 2 planes with hydr. tool clamping, various tool fixtures, coolant

Condition: good (used), Year of construction: 1995, Universal milling machine, make AUERBACH, type: 315 FUW, year of manufacture 1995 with 3-axis digital display HEIDENHAIN, hydraulic tool clamp, machine vice tool holder, counter holder for horizontal milling, coolant system, machine documentation in good condition. Travel paths: X 500 mm Y 400 mm Z 330 mm Table: 400 mm X 700 mm Spindle mount: ISO 40 Spindle speeds: 20-3000 rpm Rapid traverse: X / Y / Z. Nslhcdev Dab Dewvjwd For further data, see data sheet.

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² compressed air: 6,3 bar Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Nolsu Nc Rishcdwvewd Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: used, Year of construction: 1995, x-travel 1200 mm y-travel 600 mm z-travel 600 mm table-size 1300 x 600 mm max. workpiece weight 2000 kg spindle taper ISO 50 spindle turning speed - stepless 30 - 3500 U/min feeds -stepless- 1 - 6000 mm/min rapid traverse 10 m/min power capacity - milling spindle 18 kW max. torque on the spindle 500 Nm distance work spindle /surface of the table 267 - 867 mm distance table-vertical head 58 - 658 mm voltage 380 V / 50 Hz control voltage 230 V total power requirement 22 kW weight of the machine ca. 6,5 t dimensions 3,6 x 4,2 x 2,3 mm • CNC control DR. HEIDENHAIN TNC 360, • hydr. tool clamping attachment Njljvw Duhehcdwvewd • electr. handwheel, • vertical head manually tiltable, • coolant device,

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Nwslheh Rawfecdwvod Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

Condition: used, drilling capacity steel/GG: 30/40 mm spindle taper: 3 MK arm length: 350 mm table size: 350 Ø mm spindle sleeve stroke: 150 mm spindle turning speed range: 155; 280; 470 u. 790 rpm Njleb Hl H Iehcdwvowd carriages: 0,1/0,2/0,3 mm engine: 380 V, 1,1 kW space needed: 950 x 530 x 2300 mm weight: 445 kg

Year of construction: 2011, operating hours: 8,000 h, Condition: good (used), machine/vehicle number: 041-045, AUERBACH drilling and milling machine, model AX3 TLF, 2011, in good condition. Photos, dimensions, nameplate attached in the photos. Technical parameters: Longitudinal travel (X axis) table: 1600 mm Cross travel (Z axis) column: 700 mm Cross travel (W axis) drilling head: 1300 mm Vertical travel (Y axis) of the drilling head: 800-1200 mm Rotation axes: - B axis rotary table: 360 degrees - A axis drilling head: -25 to +15 degrees Drilling range - deep drilling: Diameter range: 3 - 32 mm Drilling depths in one pass: 1300 mm Maximum possible drilling depth: 1700 mm Main drive / deep drilling module: Nominal drive power: 12 / 18.5 kW Speed range: 60 - 8000 RPM Spindle torque: 115 Nm Feed drive: Nwjlsg N Tb Nshcdwved Feed speed: 1 - 15 (in the Y 1-10 axis) m / min rapid feed speed in all axes: 15 (Y axis 10) m / min Machine dimensions / installation site: Weight - main machine kg 12000 Installation site size: - Width: 5500 mm - Depth: 5300 mm - Height: 3400 mm Location: Kopalniana 72 Tarnowskie Góry, Poland

Condition: excellent (used), Year of construction: 1997, Machine from training center as good as new, travel X-625mm, Y-525mm, Z-455mm, tool holder SK40, tool magazine 20 places, table clamping area 500mm x 900mm, spindle speed 5000rpm, CNC control Siemens 840D Nwjlhcovmpm Isdwvod

Condition: used, Year of construction: 1992, x-travel 725 mm y-travel 525 mm z-travel 505 mm Nslhsvbwimscdwvswd table-size 1000 x 500 mm table load capacity 500 kp spindle taper ISO 40 quill stroke 80 mm spindle turning speed range 25 - 5000 U/min voltage 400 V tool changer made by: Kelch 20-fach CNC-control PHILIPS 3460 power capacity - milling spindle 10 kW total power requirement 18 kW weight of the machine ca. 4,1 t dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Rigid machine for heavy machining. Machine was last time under power 8 years ago. Machine parameters must be reloaded to RAM. Machine is sold as it is (not working), no guarantee. For spare part use or reconditioning / retrofit.

Condition: ready for operation (used), Year of construction: 1989, Immediately free from education center : Universal Milling Machine Horizontal - Vertical WMW Auerbach Type FW 250 x 1000 / 2 Year of construction 1989 Table 1250 x 250 mm Table load 1250 kg Travel X/ Y/ Z 700 / 400 / 500 mm Heidenhain 3 axes digital readout SK 40 Spindle speeds 55 - 2800 rpm Feed rates 10 - 630 mm / min stepless Vertical head Nelhcdweuw Rppjvowd Horizontal milling device Drive 6,3 kw Weight 2.5 to At a price of Euro 3,000 plus VAT ex location

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Nelhcdwotmtvlsvjwd Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: good (used), Year of construction: 1998, operating hours: 12,786 h, Functionality: fully functional, Bed milling machine with universal milling head/two-axis milling head with automatic tool clamping TECHNICAL DETAILS Travel X / Y / Z: 1,500 / 1,000 / 1,000 mm Speed range: 30 - 3,500 rpm Nolotqcq Rehcdwvjwd Drive power: 25 kW Swivel range: 360° Torque: max. 700 Nm (50 % ED) Tool holder: SK 50 Tool changer: Portal Tool positions: 24 Table size: 1,600 x 800 mm Feed X / Y / Z: 0.001 - 6 m/min Rapid traverse X / Y / Z: 10 m/min MACHINE DETAILS Connected load: 42 kW Machine weight: 12,500 kg Space requirement (LxWxH): 6.1 x 5.2 x 2.9 m EQUIPMENT - Electronic handwheel - Heidenhain HR - Measuring probe