Used Auto Hydraulic Rotary Table Lifting Table For Robots for sale (56,861)

Condition: used, Hydr. flat form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit) Year of manufacture 1991 Nominal lifting capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar) platform size 2100 x 1400 mm stroke max. 930 mm Overall height - bottom 100 mm (with mounting frame) Overall height - top 1030 mm Hydr. operating pressure 350 bar = lifting force 1000 kg Motor power of hydraulics 1,5 kW mains connection 400 Volt, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety bar is actuated Csdpfsl Nbqcex Afpspu - without hydraulic power unit - without electric control length of installation frame 2270 mm width of mounting frame 1580 mm height of mounting frame = height at bottom 100 mm dead weight of lifting table 500 kg good condition

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, lifting height: 1,450 mm, load capacity: 1,000 kg, total length: 1,700 mm, total width: 760 mm, input voltage: 400 V, type of input current: three-phase, height adjustment type: hydraulic, operating pressure: 180 bar, We are selling a mobile lifting platform from Trepel, Wiesbaden, which was used for loading and unloading trucks. The platform is in very good condition and operates flawlessly. Viewing is possible by appointment. Cpjdpfx Afjydc Dfspou

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: F/18/0003334/A/001, Milling robot cell, year of manufacture 2018, essentially consists of: Robot system including console for mounting the robot (upright); Clamping and exchange system, with one fixture inside the enclosed robot cell, the other outside the danger zone, for loading and unloading; Milling spindle including control unit; Safety enclosure and protective equipment; Control cabinet and controller; Vacuum clamping system. The cell can be inspected in operation until the end of January 2026, after which it will be dismantled and will no longer be in operation! Cpjdpox Swiaofx Afpeu

Condition: used, Year of construction: 2011, input voltage: 400 V, input current: 32 A, type of input current: three-phase, Equipment: documentation/manual, We are offering this used robotic welding cell with 2 manual turntables, year of manufacture 2011. 1x KUKA welding robot KR 16L6 with two HDP200 manual turntables. The system is installed but no longer in use. Sale from site as seen. Type: RWS 1100 / 2×HDW Serial number: 09.09.594.000.000 Year of manufacture: 03/2011 Cpsdpfjx Tab Ijx Afpeu Power rating: 36.8 kVA Nominal voltage: 3×400 V Nominal current: 32 A Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: repair required (used), Table size: 2900 x 1200 mm Folded size (without legs: )420 mm Opened size: (without legs): 1700 mm without hydraulic unit! Cpedpfxoik Hbzj Afpeu Quantity: 1 pc Price/pc

Condition: used, Rotary indexing table, rotary indexing table with 16 stations Cedpfx Afogd D U Eepopu Rotary indexing machine + TOX hydraulic press Special rotary indexing machine with multiple assembly stations Production and assembly line with rotary indexing system From special machinery manufacturer "AKE-technologies GmbH" Serial number: Order number: 11111 Year of manufacture: 2012 - large rotary indexing table WEISS type TC500, with 16 stations - pressing station with TOX power pack - vibratory feeder - conveyor belts - testing stations - some stations still visible in the photos but already dismantled Required space L x W x H approx. 3500 x 2750 x 2300 mm Net weight approx. 3000 kg All in as-new condition – the system was never used in series production.

Condition: used, Hydr. scissor lift table WEIDMANN type E5/13-1 Serial no. 30403339 Year of construction 1982 / 2007 Load capacity 500 kg Platform size 2000 x 1200 mm Codohlnznspfx Afpspu Lift max. 1280 mm Overall height - table bottom 290 mm Overall height - table top max. 1570 mm Table height with safety support 1430 mm Lifting speed 1280 mm in 25 sec. Lowering speed 1280 mm in approx. 0 to 15 sec. Hydraulic operating pressure approx. 130 bar Motor power 1.5 kW Mains connection 400 Volt, 50 Hz. - Rotary switch on the hydraulic unit for up and down - Infinitely adjustable lowering speed via throttle valve - 1 lifting cylinder - Hydraulic unit built in 2007 with tank opposite - Safety protection frame with limit switches dead weight 660 kg good condition

Condition: used, Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Make No.: 124984 Year of construction 2017 lifting capacity 300 kg platform size 1250 x 800 mm Csdpoixq Hnofx Afpopu useful stroke max. 785 mm Overall height - table bottom 345 mm Overall height - table top 1130 mm Motor power 0,8 kW Mains connection 400 Volt, 50 Hz - foot switch for up and down, with emergency stop and key switch for control on - single shear with one lifting cylinder - revolving safety contact strip with limit switches under the upper frame - adjustable limit switch for the upper lifting restriction - Table top with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic power unit with tank mounted under the table - feet under the table corners, mobile with lift truck own weight 250 kg very good condition, almost as new

Condition: used, Single-column hydraulic press SCHÖN type FES / C 7 Machine no. No. 4281 Year of construction 1995 Pressure force 7 ton. throat 170 mm Projection round cycle station 60 mm Table size 310 x 200 mm Rotary indexing table Ø 400 mm, with 12 indexing stations Plunger surface approx. Ø 100 mm Plunger plate 315 x 200 x 35 mm Ram stroke 100 mm Installation height rotary table - ram plate max. 130 mm Table height above floor 890 mm Ram speed rapid traverse downwards approx. 300 mm/sec. Ram speed rapid traverse upwards approx. 300 mm/sec. Cpsdpfx Aer I E Itefpeu Ram speed Working speed approx. 30 mm/sec. Drive power 1.5 kW Mains connection 380 Volt, 50 Hz Tank capacity approx. 50 liters hydraulic oil - Rotary indexing control via SIEMENS S7- 1200 - GECHTER pneumatic rotary indexing table with 12 indexing stations - Mechanically adjustable fixed stop - Adjustable pressure holding time in the UT - electrical 2- manual operation Space requirement L x W x H 1450 x 850 x 1900 mm weight 700 kg good condition

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Cjdsxdivyopfx Afpepu Technical data: - Operation via hand-held remote control with cable - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head Cpodpjwmnhpjfx Afpju - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm Cedpsrt Unwefx Afpepu - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: excellent (used), Year of construction: 2015, Complete robot welding cell with rotating table and enclosure Robot: KUKA KR 150 R2700 extra Load capacity: 150kg reach: 2.090mm with welding gun (Dalex, new in 2018) with cooling device (water cooling in circuit) Cjdpenr E Enofx Afpopu complete second welding gun (make ARO) included own cooling unit built in the machine automatic rotary table with 10-fold division (at present for running product only 5-fold built up) Workplace for parts insertion or disposal well illuminated and protected by light barriers Control of the complete line by means of Siemens SPS, provided by company HS Automation Siemens control panel for system operation at the insertion station mounted on a swivel arm All together in an enclosure with safety door. Plant can still be visited in operation.

Condition: used, Orbital riveting machine Double riveting automatic with rotary indexing table DUNKES type DN 4 with SIEMENS control Machine No. P 81 - 5458 Year of construction 1982 / 2009 Rivet shank diameter max. 12 mm Tool shank diameter 16 mm Throat depth 190 mm Rivet head stroke per riveting unit approx. 60 mm Rivet spindle speed approx. 1400 rpm Mounting height tool - counter tool max. 80 mm Compressed air requirement 6 bar Motor power per riveting unit 1.1 kW Power supply 380 Volt, 50 Hz - Rotary indexing table with servo drive, step size programmable via Siemens PLC control - Double riveting unit adjustable in the machine frame towards rotary table - Table diameter Ø 295 mm for accommodating round workpieces - Pneumatic riveting stroke movement - Riveting unit adjustment via geared motor with leadscrew, positioning via adjustable microswitch - Control system modernized and rotary table drive converted to servo in 2009 - New electrical control cabinet with Siemens Simatic Panel - year 2009 - Riveting time infinitely programmable - Riveting pressure continuously adjustable via pressure gauge - Micrometer stop for stroke limitation of the opposing riveting units 0-60 mm Space requirement L x W x H 3200 x 1250 x 2400 mm Weight approx. 2500 kg Good condition The machine was used for riveting segment saw blades from Ø 400 to Ø 2000 mm. The segments were manually placed onto the carrier disc and fixed with straight rivets. The opposing riveting units rivet the pins simultaneously from both sides. The controlled table automatically rotates to the next working position. Ideal for saw blade manufacturers and repair shops. Or for constructing a custom special-purpose machine. Codpfx Afedzp T Nepspu

Condition: good (used), Table size:1500x1500mm Codjfvqmxjpfx Afpopu Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Csdpeq Igyvjfx Afpepu Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. Csdjq Nyzbjpfx Afpspu 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Cedpfx Asvuk Uijfpspu

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Codpfxjtddw Aj Afpopu Hydraulic lift, lifting capacity around 1 ton.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: Cpjdeq Nfuzepfx Afpsu - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance.

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Codpfx Afjw R Syispopu

Condition: used, machine/vehicle number: 007277, Max. panel width: 800 mm Cpedpfx Aet H Tynefpou Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Cedpot H Tx Djfx Afpspu Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Max. panel length: 2500 mm Csdpfxjt H Txqe Afpepu Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, Technical details: Cpjdpfxsu N D Ays Afpou table diameter: 450 mm rotatability of the table - manual/mechanic: 360 ° clamping table - swivable: 90° mechanisch Grad weight of the machine approx.: 100 kg dimensions: L: 800 x B: 700 x H: 400 mm The surface of the round table is scraped. Very good condition! micrometer precise locking Positioning in the 0.01 mm range T-slots according to DIN 650 radial Foot clamping 16mm (6 holes) *