Used Cable Stripper for sale (3,962)

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Rcjdpfx Aiepy Uzysrsh Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: refurbished (used), Year of construction: 2011, machine/vehicle number: R-00407, load capacity: 200 kg, arm reach: 3,095 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/200R manufactured in 2011.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/200R Model Number: A05B-1329-B225 Year of Manufacture Robot: 2011.06 Warranty term (months): 12   Payload (kg): 200 Reach (mm): 3095 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Rack Mount Weight (kg): 1540   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2011.06 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Rcsdpe Abauxofx Airjh Teach Pendant Cable Length (m): 12  

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 784 mm, total length: 835 mm, total width: 526 mm, Tested forklift battery for your forklift – 48V 4PZS 620Ah – DIN A + 1-year warranty + including Aquamatik (automatic watering system) + including terminal discharge cable & REMA 320 connector (other connectors can be fitted upon request) + Capacity: minimum 90-100% (C5 capacity protocol included with delivery) + Year of manufacture/delivery: 2024 Dimensions: Length 835 mm Width 526 mm Height 784 mm Weight: approx. 960 kg Suitable for the following models and others: Linde E 15 C - 322-00 Rodpfx Ajy Rni Ujirech Linde E 16 CH - 1275-00 Linde E 18 Z - 322-00 Linde E 20 PH - 386-02 – side battery change Linde V MODULAR - 5213-00 Jungheinrich EKS 308 Jungheinrich EKS 312 Crown SC 3220 Common battery sizes available, please inquire. Transport can be arranged.

Condition: refurbished (used), battery capacity: 750 Ah, battery voltage: 48 V, total height: 625 mm, total length: 827 mm, total width: 735 mm, Tested forklift battery for your truck – 48V 6PZS 750Ah – DIN A + 1-year warranty + Incl. Aquamatic system + Incl. end cell cables & REMA 320 connector (other connectors can be installed upon request) Rcodey Rnndspfx Airsh + Capacity: min. 90-100% (C5 capacity protocol provided upon delivery) + Year of manufacture: 2024 Dimensions: Length 827 mm Width 735 mm Height 625 mm Weight: approx. 1,020 kg Suitable for the following models and more: Linde E15S-355-00 Linde E16 - 324-00 Linde E16 - 386-00 Linde E16L - 386-02 Linde E18 - 355-00 Linde E18 - 386-02 – lateral change Linde E18C - 355-00 Linde E18 L - 386-00 Linde E18 L - 386-02 – lateral change Linde E20 L - 386-00 Linde E20 L - 386-00 – lateral change Linde E20 PL - 386-00 Linde E20 PL - 386-02 – lateral change Linde R14 X - 116-03 – frontal change Linde R14 X HIGH - 116-00 – frontal change Linde R16X - 116-00 Linde R16X - 116-00 – frontal change Linde R16X- 116-03 – frontal change Still R20-16 Still R20-18 Still RX 20-18PL Still RX 20-20 Crown SC 5360-2.0 Jungheinrich EFG Series Jungheinrich EFG 216 Jungheinrich EFG 218 Jungheinrich EFG 220 Jungheinrich EFG 222 Jungheinrich EFG 316 Jungheinrich EFG 318 Jungheinrich EFG 320 Jungheinrich EFG DF 16L Jungheinrich EFG V 20 Jungheinrich EFG VAC 320 Toyota 7FBEF16 Toyota 7FBEF18 Toyota 7FBEF20 Toyota 8FBE16T Toyota 8FBE18T Toyota 8FBE20T Blgkcdacpxv Toyota 8FBEK18T Toyota 8FBMT18 Toyota 8FBMT20 Toyota/BT CBE 2.0 Caterpillar EP 16/20 Caterpillar EP20PN Cesab B320A Hyster J1.6XNT Hyster J1.8XNT Hyster J2.0XN LOC E20 Mitsubishi FB16PNT Mitsubishi FB20PN Mitsubishi FB20PNT Steinbock-Boss KE20 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 784 mm, total length: 1,035 mm, total width: 533 mm, Tested forklift battery for your truck - 48V 5PZS 775Ah - DIN B + 1-year warranty + Includes Aquamatic system + Includes end discharge cables & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity protocol supplied with delivery) + Year of manufacture: 2024 Dimensions: Length 1,035 mm Width 533 mm Height 784 mm Weight: approx. 1,160 kg Suitable for the following models and more: Linde A (1120) - 5022-00 Linde A - 5224-00 Linde E 16 - 386-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 10 Linde K 12 Linde R 14 N - 1120-00 Linde R 14 N - 1120-00 - front battery change Linde R 16 N - 1120-00 Linde R 16 N - 1120-00 - front battery change Linde R 16 N HD - 1120-00 - front battery change Linde R 20 N - 1120-00 Linde R 20 N - 1120-00 - front battery change Linde R 20 N - 113-00 Linde R 20 N - 113-00 - vertical battery change Linde R 20 SN - 115-08 - vertical battery change Still EK 11 Still FM-X 14 N Still MX 10 Still R 20-16 Still RX 20-18 Still RX 20-18 P Still RX 20-20 Still RX 20-20 PL Jungheinrich ETM 214 Jungheinrich ETM 216 Jungheinrich ETV Jungheinrich ETV C 16 Jungheinrich ETV Q 20 Crown ESR 5220-1.6 Caterpillar NOH10NH Caterpillar NR20NH Rcsdpfx Ajy Rnn Rsireh Common battery sizes available - please enquire. Delivery possible.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 48 V, total height: 785 mm, total length: 832 mm, total width: 631 mm, Tested forklift battery for your forklift - 48V 5PZS 775AH - DIN A + 1 year warranty + Including aquamatic (automatic watering system) + Including end discharge cable & REMA 320 plug (other plugs available on request) + Capacity: min. 90-100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 832 mm Width: 631 mm Height: 785 mm Weight: approx. 1,150 kg Compatible with the following models and others: Linde E 16 - 335-00 Linde E 16 - 386-00 Linde E 16 CH - 1275-00 Linde E 16 H - 386-00 Linde E 16 H - 386-02 - side battery change Rsdpfxey Rnpbe Airech Linde E 16 P - 322-00 Linde E 16 P - 335-00 Linde E 16 PH - 1275-00 Linde E 16 PH - 386-00 Linde E 16 PH - 386-02 - side battery change Linde E 18 - 386-02 - side battery change Linde E 18 P - 322-00 Linde E 18 P - 335-00 Linde E 18 PH - 386-00 Linde E 18 PH - 386-02 - side battery change Linde E 18 Z - 322-00 Linde E 20 P - 335-00 Linde E 20 PH - 1275-00 Linde E 20 PH - 386-00 Linde E 20 PH - 386-02 - side battery change Linde E 20 PH EVO - 386-02 Linde EG 16 - 1275-02 - side battery change Linde EG 16 H - 1275-02 - side battery change Linde EG 16 P - 1275-02 - side battery change Linde EG 16 PH - 1275-02 - side battery change Linde EG 20 PH - 1275-02 - side battery change Linde R 20 - 1120-00 Linde R 20 G - 1120-00 Crown SC 3013 Other common battery sizes available on request. Transport can be arranged.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00734, load capacity: 260 kg, arm reach: 3,100 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-900iA/260L manufactured in 2012.12. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-900iA/260L Redpfx Aij Adqydjrech Model Number: A05B-1327-B503 Year of Manufacture Robot: 2012.12 Warranty term (months): 12   Payload (kg): 260 Reach (mm): 3100 Repeatability (mm): ± 0.3 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 1720   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.11 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Rcedpfx As Ad Iy Isireh Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 76,480 km, power: 140 kW (190.35 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,495 mm, loading space width: 1,771 mm, loading space height: 1,959 mm, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 67.66 - Dimensions, passenger/cargo area: Length to driver's seat 3,479 mm x Length to partition 2,186 mm x Width 1,778 mm x Height 1,967 mm - Sortimo workshop van equipment, left and right, extra charge 1,000 € - All-wheel drive 4x4 with Torque-on-Demand - Transmission: 9G-TRONIC - Climate control: Tempmatic - MBUX multimedia system with 7-inch touchscreen - Navigation with voice control, Apple CarPlay and Android Auto - Package: Parking package with reversing camera - Radio: Digital radio DAB - Spare wheel, off-road version - Spare wheel holder with jack - Off-road version - Thermal insulation, driver's cabin - Thermal insulation, cargo area - Auxiliary heater (hot water), programmable and with remote control - WET WIPER SYSTEM - Seat heating, driver's side - Seat heating, passenger side - Seats: Pre-wiring for seat configuration 3/-/ - Seat: Lumbar support, passenger seat, electric - Seat: Lumbar support, driver's seat, electric - Comfort driver's seat - Comfort headrest, driver's side - Comfort passenger seat - Rain sensor - Package: Acoustic package - Package: Charging package, instrument panel - Tires: All-season tires - Rear door, double-wing opening, with side wall - Seats: 3-seater bench, 1st row - Cruise control - Partition, continuous to the C-pillar - Wooden floor in the passenger/cargo area - Tinted glass in the rear, black - Rails for roof rack - ATTENTION ASSIST - Axle ratio i = 3.923 - Airbag, passenger side - Step, rear door - Exterior mirrors, electrically foldable - Battery: AGM battery 12 V / 92 Ah - Turn signal lights, side, front - Exterior mirrors without turn signal - Heated windshield with band filter on the front - Warm air duct to the passenger compartment - Pre-wiring, electrical system, parametric special module - Adjustable loading area up to the railing, in conjunction with partition - USB socket 5 V - Armrest, driver's and passenger's door - Mud flaps, front - Mud flaps, rear Rjdpfx Ajzkxgnsiroch - Wheels: Jack, hydraulic - Wheel arch lining - Live Traffic Information - Marker lights, side - Multifunction steering wheel - Cable duct on the side wall - Retrofitting of a trailer coupling possible - Chassis number: W1V9076331P451809 1st owner, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original Mercedes Benz service booklet, trade-in of old vehicle possible, workshop-inspected including warranty, DEKRA used car condition report available upon request. We would be happy to deliver the vehicle, purchased locally, to your home for a price of 0.50 € / KM. The minimum cost is 150.00 €.

Condition: used, mileage: 76,480 km, power: 140 kW (190.35 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,495 mm, loading space width: 1,771 mm, loading space height: 1,959 mm, Year of construction: 2022, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 67.66 - Dimensions, passenger/cargo area: Length to driver's seat 3,479 mm x Length to partition 2,186 mm x Width 1,778 mm x Height 1,967 mm - Sortimo workshop van equipment, left and right, extra charge 1,000 € - All-wheel drive 4x4 with Torque-on-Demand - Transmission: 9G-TRONIC - Climate control: Tempmatic - MBUX multimedia system with 7-inch touchscreen - Navigation with voice control, Apple CarPlay and Android Auto - Package: Parking package with reversing camera - Radio: Digital radio DAB - Spare wheel, off-road version - Spare wheel holder with jack - Off-road version - Thermal insulation, driver's cabin Rodpfx Aiozkxf Djrsch - Thermal insulation, cargo area - Auxiliary heater (hot water), programmable and with remote control - WET WIPER SYSTEM - Seat heating, driver's side - Seat heating, passenger side - Seats: Pre-wiring for seat configuration 3/-/ - Seat: Lumbar support, passenger seat, electric - Seat: Lumbar support, driver's seat, electric - Comfort driver's seat - Comfort headrest, driver's side - Comfort passenger seat - Rain sensor - Package: Acoustic package - Package: Charging package, instrument panel - Tires: All-season tires - Rear door, double-wing opening, with side wall - Seats: 3-seater bench, 1st row - Cruise control - Partition, continuous to the C-pillar - Wooden floor in the passenger/cargo area - Tinted glass in the rear, black - Rails for roof rack - ATTENTION ASSIST - Axle ratio i = 3.923 - Airbag, passenger side - Step, rear door - Exterior mirrors, electrically foldable - Battery: AGM battery 12 V / 92 Ah - Turn signal lights, side, front - Exterior mirrors without turn signal - Heated windshield with band filter on the front - Warm air duct to the passenger compartment - Pre-wiring, electrical system, parametric special module - Adjustable loading area up to the railing, in conjunction with partition - USB socket 5 V - Armrest, driver's and passenger's door - Mud flaps, front - Mud flaps, rear - Wheels: Jack, hydraulic - Wheel arch lining - Live Traffic Information - Marker lights, side - Multifunction steering wheel - Cable duct on the side wall - Retrofitting of a trailer coupling possible - Chassis number: W1V9076331P451809 1st owner, no re-import (German vehicle), not a rental car, top condition, non-smoking vehicle, original Mercedes Benz service booklet, trade-in of old vehicle possible, workshop-inspected including warranty, DEKRA used car condition report available upon request. We would be happy to deliver the vehicle, purchased locally, to your home for a price of 0.50 € / KM. The minimum cost is 150.00 €.

Condition: used, Year of construction: 2013, Overview This Cermex F38741, built in 2013, is an automatic cardboard case erector that forms shipping cases from flat blanks for an end-of-line packaging setup. Blanks are taken from the magazine, erected, the bottom flaps are folded and closed, and the open case is discharged on the outfeed rails to the downstream packer. The machine comes from a wine packaging operation and has been dismantled and stored. Technical data - Manufacturer: Cermex - Model: F38741 - Year of manufacture: 2013 - Machine type: automatic cardboard case erector - Output: up to 40 cases per minute - Power supply: 400 V, 50 Hz, 3P+N+PE, 23 A full load - Control: Siemens SIMATIC S7-200 PLC (CPU 224) Rcsde Afdr Nepfx Aireh Equipment - Blank magazine with infeed chain and lugs - Erecting station with pick-up head on a cable-chain carriage - Bottom flap folding and closing section - Outfeed rails for the erected cases - Enclosure with transparent safety doors and signal tower - Separate control cabinet with Siemens operator panel, emergency stop and control transformer - CE marked Condition Dismantled and stored. An inspection is possible. Availability Available immediately. Location: France.

Condition: used, functionality: fully functional, mileage: 7,96,299 km, Year of construction: 1999, MAN 33464, 6x4 air suspension, reinforced frame bridges, 33 t technical gross weight. With expired technical, Hungarian papers, temporarily withdrawn. In usable condition for its age. Platform: 620 x 250 (built by Schwarzmüller in Germany), with cargo fasteners, reinforced back wall (load carrier). Rodoy Ivhaopfx Airsch Crane: Palfinger 66000 E (1999) with 6 hydraulic members, 2.5 t winch, accessories. The control block on the crane has been renovated, the crane radio remote control is new: transmitter, receiver, remote control, cables, complete set. 4.3 m /13.5 t; 9.0 m /6.1 t; 16.0m / 3.2t.

Condition: used, Year of construction: 2002, 2002 Friulmac DUALFEED Cutter - Loader for hydraulic, automatic shearer, with electronic size adjustment. The Dualfeed machine consists of two heads connected by a welded steel frame, on which two support shafts for pallets are fixed. One of the support pallets is fixed while the other is movable to allow opening of the head placed on the action of the hydraulic fluid and centraining On the pallets they find space at the entrance, the parts warehouse for automatic loading handling hydraulics. pieces to be machined, then the workpiece feed system, the work groups and the press group, finally at the output, the hauling group assigned to the entry of pieces to the scorniciatrice. The purpose of the machine is to continuously feed the chipping machine with pieces cut to the required size of the woodworking material, as specified in the technical specification. The operating cycle takes place in two distinct phases: - in the first phase the piece is automatically retrieved from the warehouse where the operator previously performed the loading operation and the transit is passed through two sawing blades that cut it to the adjusted length. - In the second phase the piece header is always automatically moved to the pre-feeder of the scorner where two dedicated feed rollers insert it into the - just shearer. The loading speed automatically adjusts to the pull speed of the palm framer and the machine operation stops automatically if for any reason the palm framer's pull stops. The piece advancement is performed by pushers mounted on a movable bar that has an alternating (forward-backward) movement. At the end of the work cycle the piece exits the machine with the same pusher system and is deposited on the stripper conveyor bed where two feed rollers insert it into the stripping machine. The alternating motion of the mobile bar that carries the pushers is hydraulically obtained from a rotary actuator and the two traction rollers are driven by a hydraulic motor. Minimum piece length: mm. 260 Maximum piece length: mm. 1300 Minimum piece width: mm. 40 Maximum piece width: mm. 110 Minimum thickness: mm. 10 Rcsdpfx Aszxg Ddoirsh Maximum thickness: mm. 80

Condition: excellent (used), Year of construction: 2009, operating hours: 7,700 h, functionality: fully functional, mileage: 7,700 km, overall weight: 5,050 kg, fuel type: diesel, color: yellow, axle configuration: 2 axles, empty load weight: 5,050 kg, gearing type: hydrostat, number of seats: 1, Equipment: additional headlights, adjustable chassis, all wheel drive, hydraulics, low noise, rubber tracks, MGC.pl – professional sales and service of VERMEER machines! We specialize in the sale and service of professional VERMEER horizontal directional drilling rigs. We provide expert technical advice, assistance in selecting the right equipment, and service support. We also offer other VERMEER drilling rig models. VERMEER NAVIGATOR D20x22 SERIES II – 2009 VERMEER NAVIGATOR D9X13 SERIES II - 2012 VERMEER D24x40A - 2003 We offer for sale a professional VERMEER D20x22 II NAVIGATOR horizontal directional drilling rig from 2009, manufactured in the United States. The machine comes from its first and only owner, who has used it continuously since it was new until the cessation of their business operations. We have a flushing system available for this DRILLING RIG, which is not included in the PRICE. Engine - Model: Kubota 3800 Turbo - Type: Turbocharged diesel engine - Power: 62 kW / 83 hp, approximately 84 hp - Maximum idle speed: 2400 rpm - Engine oil capacity with filter: 8.5 l - Fuel tank: 95 l Drilling parameters - Maximum spindle torque: 2983 Nm - Maximum spindle rotation speed: 205 rpm - Thrust force: approximately 89 kN / 9.07 t - Pull force: approximately 89 kN / 9.07 t - Minimum bore diameter: 9 cm - Carriage travel speed – fast range: 41 m/min - Carriage travel speed – slow range: 27 m/min - Automatic rod feeder: yes Drill rods - Type: Vermeer Firestick® I - Single rod length: 3 m - Rod diameter: 52 mm - Single rod weight: 27 kg - Minimum bending radius: 31 m - Rod magazine capacity: 107 m total length Flushing and hydraulic system - Maximum flushing pump capacity: 95 l/min - Maximum flushing pressure: 52 bar - Hydraulic oil tank capacity: 87 l Dimensions, weight, and travel - Maximum length: 541 cm - Transport length: 508 cm - Width: 119 cm - Height: 193 cm - Catalog weight: 4808 kg - Maximum travel speed: approximately 4 km/h EQUIPMENT Hydraulic drilling system Track-type undercarriage Operator station with seat Drill rod magazine Hydraulic drilling mast Anchoring and stabilization system Control system for working functions Rcsdpfs Ad I Huex Airjh Design adapted for professional trenchless operations APPLICATION The VERMEER D20x22 II drilling rig is used for: Construction of fiber optic and telecommunications networks Installation of water supply systems Construction of gas networks Laying of power cables Installation of pressure sewer systems Construction of culverts under roads and railway tracks Implementation of infrastructure projects using trenchless methods GREATEST ADVANTAGES OF THE OFFERED MACHINE 1 OWNER SINCE NEW – the machine remained in the hands of one company throughout its service life. SALE DUE TO CESSATION OF BUSINESS – the previous owner has ceased operating the business. INSPECTION REPORT: The machine has been tested for various functions and is fully operational. There are no leaks. The engine runs smoothly, both when warm and cold. The hydraulic system also has no significant play or leaks. The stated price is net and applies to export and for companies. A substantial discount is possible for private customers. We invite you to contact us directly by phone to obtain your best price.

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00740, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2012.03. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2012.03 Warranty term (months): 12   Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.03 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Rcedpfx As Ad Daqoireh Teach Pendant Cable Length (m): 10    

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00707, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Rcedpfx Ao Afuy Rsiroh Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.03 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: used, machine/vehicle number: WKESDC27061272060, empty load weight: 5,700 kg, maximum load weight: 33,300 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 06/2006, suspension: air, tire size: 385/55 R22,5", tire condition: 70 %, color: grey, - Vehicle in transit! - Archive images are used. The vehicle may still be in use. - 3-axle goods-carrying semi-trailer - # Chassis - Longitudinal members – container chassis - 13.60 m chassis - Permissible / technical gross weight: 39000 kg - Approx. permissible / technical payload: 34600 kg - Approx. unladen weight (basic version): 4400 kg - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Container fittings: - 1 x 40 ft with tunnel - 2 x 20 ft - 1 x 20 ft centrally positioned - 1 x 30 ft - With front and rear chassis extensions - 2 wheel chocks with holders - Aluminium side underrun protection - Galvanised steel rear underrun protection - Half-shell mudguards - 2 anti-spray mudflaps - Rear corner impact protection - 1 ADR plate Rcedpfx Ae Af Uzdeirjh - # Axles and suspension - SAF axles with disc brakes - # Wheels and tyres - 385/55 R22.5" - Steel rims, factory silver - # Electrical system - 24 V, multi-chamber lamps, LED rear and brake lights, yellow LED side marker lights - 2 white LED front position lamps - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin foolproof sockets at the front, without connecting cable - # Paint finish - Painted frame - # Landing legs - Black coated

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 35 kg, arm reach: 1,831 mm, controller manufacturer: FANUC, controller model: R-30iB Plus (A-Cabinet), teach pendant manufacturer: FANUC, teach pendant model: iPendant Touch, type of input current: three-phase, repeat accuracy: 0.03 mm, warranty duration: 24 months, Equipment: documentation/manual, Basic information: Teximp Universal Robot Cell is an all inclusive robotic automation solution for your CNC machine. The URC-35P is based on Fanuc M-20iD/35 robot arm adapted for handling pallets or vises. It consists of: 1) Robot: Fanuc robot M20iD/35 6-axis vertical robot Load capacity 35 kg / reach 1831mm R-30iB Plus controller A-cabinet I/O modules; DI32 / DO32 DCS Dual Check Safety Position (J567) Soft Float (J612) Touch Skip (J921) Singularity Avoidance (R792) User Socket Messaging (R648) Karel (R632) 2) Loader Table: Compact but heavy loader table with front entrance. Table size: 980 x 700 mm Docking station with four pockets Three locating pins for quick pallet exchange ReeR safety light curtain, Cat. 4 Three control buttons LED status beacon Electrical cabinet and cables included 3) Pallet Rack The URC-35 Palletizing cell can be equipped with 1 or 2 large-capacity racks with 42 pockets. Large rack (42 pockets) - included as standard Second large rack (42 pockets) - optional 4) Vices & Zero-point clamping system The system is designed for: - Lang Vices (not included in price) - Lang Zero-Point clamping system (not included in price) Rcsdpfs Af Uxxjx Aireh - Note: it can also be implemented to work with pallets instead of vices (not included in price) 5) Safety Options: Cage (standard) ReeR safety light curtains (cat.4) on Loader table (standard) Plexiglass cover on Racks (standard) ReeR Mosaic M1 safety controller (standard) 6) Interface to the Haas machines Teximp Robot Interface includes all needed to connect the URC to any Haas machine. Support Haas Mill and Lathe machines, with NGC and CHC control. (If your machine is not Haas, we can adjust robot-machine interface. Note: this will be additionally charged) Communication CNC < = > URC (I/O, safety, program call -> all via Ethernet cable communication) Preparing for a Clamping device Preparing for a PAD Preparing for an external Air Blow 7) Gripper Configuration The Teximp Gripper Interface includes everything needed for gripping the vices Gripper carrier Schunk Gripper JGP-P 160-2 Stroke per jaw [mm] = 8 Recommended workpiece weight [kg] = 24.5 Preparation for vice/pallet clamping Sensors for gripper state detection - clamped/unclamped Blower nozzle Laser sensor (for vise presence detection) 8) Automatic Door system URC-35 Palletizing can be equipped with a pneumatic auto door (PAD) for selected Haas machines. Available PAD models include: a) PAD-HaasUMC-side b) PAD-HaasVF-side c) Can be made for other machines (not included in price) 9) Programming Option (HMI) Enables intuitive interaction with Teximp robotic systems through a visual interface, facilitating configuration, monitoring, and optimization of operations. It allows operators to program quickly and easily, without the need for Fanuc programming knowledge. Important Note: Operators can easily assign different .nc machining program to each Vise via HMI, robot calls assigned program on CNC machine by scanning QR code on each vise! - Easy visual programming - No additional hardware required Note: - We provide transport, installation, commissioning and operator training at additional cost. - You will have our full support during the ramp-up phase of the robotic cell, as well as for all other needs and requirements regarding our system.

Condition: used, machine/vehicle number: WKESDC27051236671, empty load weight: 4,400 kg, maximum load weight: 34,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2005, suspension: air, tire size: 385/55 R22,5", tire condition: 44 %, - The vehicle is currently in transit to stock. - The images are archive images. The vehicle may still be in use. - 3-axle semi-trailer for general cargo transport - #Chassis - Longitudinal members – container chassis – fixed design - No front or rear extension - 13.60 m chassis - Gross vehicle weight, permitted / technical: 39000 kg - Payload, permitted / technical, approx.: 34140 kg - Unladen weight (basic version), approx.: 4560 kg - Fine-grain steel welded construction, fifth-wheel plate with replaceable 2" kingpin - Container fittings: - 1 x 40 ft with tunnel - No front extension - 1 wheel chock with holder - Aluminium side underrun protection - Galvanised steel rear underrun protection - Half-shell mudguards - 2 anti-spray mudflaps - Rear impact protection Redpfx Aj Af Uv Seirjch - 1 ADR plate - #Axles and suspension - SAF disc-brake axles - #Wheels and tyres - 385/55 R22.5" - Steel wheels, factory silver finish - #Electrical system - 24 V, multi-chamber lights, rear and brake lights, yellow LED side marker lights - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable - #Paintwork - Painted chassis - Landing legs, black-coated - Final character count: to be verified

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00709, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.04. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.04 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Rjdpfxo Agbfvs Airsch Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.04 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Rcedpfx Ao Afznujireh Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: refurbished (used), Year of construction: 2025, machine/vehicle number: R-00741, load capacity: 45 kg, arm reach: 2,650 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Never-Used FANUC M-710iC/45M manufactured in 2025.09. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Rcjdpfx Aij Afzxysrsh Brand: FANUC Model: M-710iC/45M Model Number: A05B-1125-B208 Year of Manufacture Robot: 2025.09 Warranty term (months): 12   Payload (kg): 45 Reach (mm): 2650 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 570   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2025.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 12

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, empty load weight: 116 kg, input voltage: 400 V, warranty duration: 6 months, KARCHER HD 16/15-4 CAGE COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel braided hose, and power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. With operating parameters of 150 bar and 1600 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply (~/V/Hz): 3 / 400 / 50 Discharge capacity (l/h): 500 - 1600 Operating pressure (bar): 30 - 150 Maximum pressure (bar): 190 Connected power (kW): 7.5 Power cable (m): 5 Weight (kg): 116 Dimensions (L x W x H) (mm): 957 x 686 x 1080 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Rcjdow S Ixkspfx Airoh Open oil system - no operating time limits Highly legible and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service Large wheels facilitate transport over uneven terrain

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK 2000 kg Electric Pallet Truck The CORMAK 2000 kg electric pallet truck is designed for horizontal pallet transportation in warehouses, wholesale facilities, and manufacturing plants. Its electric drive and lifting system reduce operator effort when moving loads weighing up to 2 tons. Key Benefits of the CORMAK 2000 kg Electric Pallet Truck - 2000 kg load capacity – enables the handling of heavy pallets containing materials, components, and finished products. - 850 W drive motor – allows loads to be transported without manually pulling or pushing the pallet truck. - 700 W lifting motor – enables electric fork lifting without manually pumping the tiller. - 1150 mm long forks with an overall width of 550 mm – suitable dimensions for handling EURO pallets. - 48 V battery power supply – allows goods to be transported without a power cable restricting the travel route. Design and Technology – Electric Drive and Wheel System The battery-powered pallet truck uses separate motors for driving and lifting. The travel speed is 4 km/h when loaded and 4.5 km/h when unloaded. The polyurethane wheel system includes a front wheel measuring 160 × 55 mm and rear rollers measuring 80 × 70 mm. The 1x/4 wheel configuration consists of one drive wheel and four load rollers. Operating Efficiency and Pallet Handling When fully lowered, the forks are positioned at a height of 80 mm, making it easier to insert them underneath a pallet. The maximum lifting height of 195 mm allows loads to be raised for transportation. The overall length of 1700 mm and width of 550 mm make it possible to account for the truck's dimensions when planning storage areas, loading stations, and transport routes. Applications – 2-Ton Electric Pallet Truck for Warehouses and Production Facilities The equipment is designed for transporting incoming deliveries, supplying production workstations, and transferring finished pallets to dispatch areas. The electric pallet truck is particularly suitable for repetitive transport operations where operators regularly pick up, move, and set down loads. Standard Equipment - Electric drive and lifting system. - Battery charger. - Electromagnetic brake. - 1150 mm long forks. Technical Specifications Load capacity 2000 kg Turning radius 1300 mm Raised fork height 195 mm Lowered fork height 80 mm Fork length 1150 mm Overall fork width 550 mm Wheel diameter Ø160 × 55 / Ø80 × 70 mm Battery voltage / rated capacity 48 V / 10 Ah (equivalent to 24 V / 20 Ah) Operating time on a fully charged battery Up to 3 hours Charging time Approx. 2.5 hours Brake Electromagnetic Travel speed, loaded / unloaded 4 / 4.5 km/h Maximum gradient, loaded / unloaded 6% / 10% Wheel material Polyurethane Weight 118 kg Rcodpfx Ao Aa Nybsirjh Dimensions 1700 × 550 × 1250 mm UDT inspection required No

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00743, load capacity: 150 kg, arm reach: 3,200 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, ABB IRB 6700-150/3.20 manufactured in 2015.08. The robot comes with an IRC5 controller including Flexpendant DSQC679.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 6700-150/3.20 Model Number: IRB Year of Manufacture Robot: 2015.08 Warranty term (months): 12   Payload (kg): 150 Reach (mm): 3200 Repeatability (mm): ± 0.06 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1260   Controller: IRC5 Redpfx As Agm Tfjirsch Year of Manufacture Cabinet: {year_of_manufacture_cabinet} RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15