Used Carrying Chair for sale (4,125)

Condition: excellent (used), For sale: an industrial KSB ETABLOC-G 32-125.1/222 centrifugal pump with a 2.2 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC-G 32-125.1/222 • Design: G11 • Identification number: 48862594 • Pump number: 5-927-141345/1 • Flow rate: 3–24.5 m³/h • Head: 27.5–17 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FS 90L2A-60 • Motor number: 367694 MX • Power: 2.2 kW • Voltage: 220–240/380–420 V • Current: 7.8–7.2/4.5–4.3 A • Speed: 2850 rpm • cos φ: 0.89 • Protection class: IP55 • Insulation class: F • Operating mode: S1 The unit has a sticker from the Elektromotoren Reparaturwerk ROCK specialist service, indicating an inspection carried out in November 2017. The pump and motor were likely refurbished and inspected by a specialist service. Hjdpfx Aioz Snugsrow Used condition. Normal signs of use and storage are visible. The exact condition is shown in the pictures.

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Hsdpfsz Snd Sex Airjw Sold exactly as shown in the pictures.

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Hsdpfx Ajz Sm Dqsirow Shipping by courier or personal pickup is possible.

Condition: excellent (used), Professional external micrometer from the renowned brand Mahr, designed for precise measurements in industry, workshops, and laboratories. The device is characterized by high accuracy and a robust construction, and its large LCD display enables quick and convenient reading of results. Hodpfoz Slhhjx Airew Measurement range: 25–50 mm / 1–2” Resolution: 0.001 mm (1 µm) Functions: ZERO, ABS, REL, TOL Protection rating: IP65 – dust and splash resistant Power supply: CR2032 battery (3 V) Ergonomic, precise construction made of hardened steel Clear LCD display Catalog number: 4157042 Manufacturer: Mahr GmbH – Germany Included in the set: - Mahr Micromar 40 EWR-S digital micrometer - Measurement standard - Adjustment key - Documentation and operating instructions - Original carrying case Condition of the device: very good – fully functional and ready for use. An excellent choice for industrial plants, precision workshops, and measurement laboratories.

Condition: used, mileage: 32 km, power: 75 kW (101.97 HP), first registration: 08/2026, fuel type: diesel, overall weight: 2,220 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,500 mm, total width: 2,100 mm, total height: 1,856 mm, loading space length: 1,797 mm, loading space width: 1,628 mm, loading space height: 1,272 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4286.NW25.X020354 Errors and prior sale excepted! ---- SPECIAL EQUIPMENT * Towing hitch, fixed - incl. ESP trailer stabilization and continuous power supply * Seat Package 50: Driver and passenger seat with individually and variably adjustable heating - Driver's seat, 4-way manually adjustable - Passenger seat, 2-way manually adjustable - Airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger OTHER EQUIPMENT * ABS * Airbags, driver and passenger side - with passenger airbag deactivation function * Alcohol interlock (preparation) Hjdpfo Adwzujx Airsw * Exterior mirrors, electrically adjustable and heated * Hill start assist * Rubber floor covering, front * On-board computer incl. outside temperature display * Roof storage compartment, front * Roof rails, preparation kit * Diesel particulate filter (DPF) with SCR catalyst and AdBlue tank * Double-wing rear door with 180° opening angle (without window) * ESP with traction control * Deletion of load compartment floor * Power windows, front * Remote control: 2nd remote key for central locking - instead of conventional key * Rear tailgate handle, in plastic * Interior lighting, front with delay circuit * Interior lighting, cargo area - 1 light * Air conditioning, front incl. semi-automatic recirculation * Steering column, adjustable in height and reach * Fog lights with static cornering light * Package: Driver Assistance Package 1: Pre-Collision Assist incl. Forward Collision Warning, Pedestrian, Bicycle and Oncoming Traffic Detection - Cruise control with adjustable speed limiter - Traffic sign recognition system - Driver drowsiness warning - Lane Keeping Assist incl. Lane Departure Warning - Park Pilot System front and rear - Hill start assist - 10-inch touchscreen with DAB/DAB+ and navigation - 10.25-inch digital instrument panel - FordPass Connect incl. eCall emergency call assistant - Android Auto, Apple CarPlay, 2 USB-C ports, front, voice control * Upholstery: Fabric * Tire pressure monitoring system * Wheels: Tire repair kit * Wheels: Steel wheels 6.5 J x 17 with 215/55 R 17 tires in a 10-spoke design * Headlights, low beam: Halogen headlights with daytime running lights * Headlight assistant with day/night sensor * Sliding door, rear, right * Side wall paneling, high * Power steering, electro-mechanical EPAS * Seat belts, front * Seat Package 1 - Driver's seat, 4-way manually adjustable - Passenger seat, 2-way manually adjustable (fore and aft) - Airbag package, consisting of head and shoulder airbags, as well as side airbags for driver and passenger * Sun visor, driver's side with ticket holder and mirror * Start-stop system * Dust and pollen filter * Socket: 12-volt socket - 1x front and 1x in the cargo area * Partition, full without window (steel) * Immobilizer, electronic (EPATS) * Central locking with remote control * Auxiliary heater, electric ... and more.----1st owner. German version. Errors and prior sale excepted. 2 years factory warranty from initial registration (can be extended on request). We will gladly accept your vehicle in part exchange. Financing/leasing also possible without a deposit! Do you have any further questions? We would be happy to advise you! Although checks are carried out, a deviation of the vehicle from the description above cannot be ruled out, so we would like to point out that the vehicle description only serves to identify the vehicle in general and does not constitute a guarantee in the legal s

Condition: used, Tol measurements SK50 0 weight max. . t range L-W-H . mm with contents see photos The tech. Data are manufacturer or operator information and therefore non- Hodpsyycw Ssfx Airew binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), mileage: 3,67,836 km, power: 88 kW (119.65 HP), first registration: 10/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: air conditioning, power mirror, = Additional options and accessories = - 3 chairs - Side door = More information = General information Number of doors: 4 Year of construction: 2015 Cab: single Registration number: 2GGC752 Technical information Engine capacity: 1.598 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 2.489 kg Carrying capacity: 521 kg GVW: 3.010 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = Hedoz S Ugxspfx Airow Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2024, SCHORR ride-on sweeper Electric sweeper Street sweeper Floor sweeper Powerful and smooth-running sweeper for indoor and outdoor use. With switchable spray nozzle. The ride-on sweeper offers a convenient and efficient solution for floor cleaning. The ergonomic seat and intuitive controls enable effortless operation, even over long periods of time. The powerful motor ensures thorough cleaning even in demanding conditions. With a generous 80-liter collection container, large areas can be cleaned without frequent interruptions. This combination of convenience and efficiency makes floor cleaning a stress-free and enjoyable task. The LED work lights fitted as standard make it easier to work in darker areas. Hedpfxouac D Us Airow With an output of 1920 watts from 48V, the sweeper is equipped with enough power to get you comfortably to over 4 hours of continuous use. SCHORR RR80KM ride-on sweeper - Discover the advantages: -- Fully electric ride-on sweeper with 1250mm working width - ideal for large indoor and outdoor areas -- 48V/1920W power -- 80 liter bagless rear collection container, easy to extend and empty -- Powerful system with 48V and 58Ah -- With switchable spray nozzle for less dust turbulence -- Extremely easy to operate -- Outstanding maneuverability Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR80KM Drive: Seat Power: 1920W Operating time: approx. 4 hours Number of wheels: 4 Tires: PU (non-slip) Own weight: 400kg Basic dimensions Collecting tank volume: 80l Fresh water tank volume: 10l Main brush diameter: 500mm Total length: 1600mm Total height: 1300mm Total width: 1250mm Sweeper width (without brush): approx. 80cm *Further technical data available on request. The chassis is made of flexible and robust plastic all round, which reduces potential damage to walls, for example. Apart from the side bristles, nothing protrudes beyond the cladding so that work can be carried out as closely as possible to objects. The collection container is made of sturdy steel and can be easily removed from the rear of the machine. Sensitive components such as the headlights are protected by a metal bumper. Overall, the machine is perfectly equipped for most applications. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on sweeper. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: good (used), Year of manufacture: 2012 Empty weight: 1.405 kg Carrying capacity: 215 kg GVW: 1.620 kg Technical condition: good Visual appearance: good Please contact Christian Theißen for more information Manufacturer: Dino Lift Model: 150T Year of build: 2012 Condition: Used Data: Max. working height: 14,95 m Platform height: 12,95 m Max. reach: 9,80 m Platform lifting capacity: 215 kg Platform dimensions LxW: 1,30 x 0,70 m Swivel range: 360° / endless Total dimensions LxWxH: 6,47 x 1,81 x 2,11 m Wheel pressure (Support pressure): 13 kN Ground clearance: 0,24 m Support width both sides: 4,46 m Support length: 3,85 m Ground pressure: 100 kg Drive type: Electric / 230 V power supply Empty weight: 1.620 kg Hedpfxe Aa Rdbs Airjw Special features: rotatable working basket, maneuvering drive, 4 supports. Socket in the basket.

Condition: used, WEISS TECHNIK Climate testing chamber / Temperature testing chamber / Climate chamber Weiss Umwelttechnik WK-180/70/5 Temperature range -70 °C to +180 °C Test chamber volume approx. 190 liters Water-cooled – Temperature and humidity testing system For sale is a used climate testing chamber from the manufacturer Weiss Umwelttechnik GmbH, model WK-180/70/5. The climate testing chamber was developed for carrying out temperature and climate tests. It is suitable for the testing of materials, components and electronic parts under different temperature and humidity conditions. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Model: WK-180/70/5 Type of equipment: Climate testing chamber / Temperature testing chamber Design: water-cooled Test chamber volume: approx. 190 liters Country of manufacture: Germany Temperature data: Temperature range: -70 °C to +180 °C Temperature change rate according to the manufacturer: Heating: approx. 7.5 K/min Cooling: approx. 7.5 K/min Climate data according to the manufacturer for the WK series: Climate temperature range: +10 °C to +95 °C Relative humidity: 10 % to 95 % r.h. Humidity control for climate tests The specifications for the temperature change rates and the climate range are the manufacturer's stated values. The actual performance depends on the operating and test conditions. Refrigerant circuit: Refrigerant 1: R404A Fill quantity: 2.50 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Fill quantity: 0.75 kg Max. low pressure: 19 bar g Max. high pressure: 25 bar g Standby pressure: 13 bar g Refrigerant and fill quantities according to the nameplate. An up-to-date leak test certificate is not included in the available documentation. Electrical data: Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 21 A Test chamber: Test chamber volume: approx. 190 liters Internal dimensions (W × D × H): approx. 580 × 450 × 750 mm Test chamber with viewing window Metallic shelves / grid trays Test specimen feed-throughs Dimensions / Transport: External dimensions (W × D × H): approx. 870 × 1,285 × 1,775 mm Weight: approx. 460 kg Dimensions according to the manufacturer's drawing. Weight according to the manufacturer's specifications without options. Actual dimensions and weight may vary depending on the equipment. Equipment: Climate testing chamber with temperature and humidity control Water-cooled cooling system Electronic temperature control S!MCON / 32 control unit of the series External control panel Viewing window Test chamber lighting Metallic shelves Lateral test specimen feed-through Multi-stage refrigeration system Electrical power connection Industrial housing with adjustable feet Equipment according to the pictures Application areas: Temperature tests Climate tests Environmental simulation Material testing Electronics and component testing Aging and stress tests Quality assurance Research and development Hjdpfx Aij Abbidjrsw Product and component testing Workshop inspection from 15.10.2026: Measured temperature change Heating: approx. 9.7 K/min Measured temperature change Cooling: approx. 12.1 K/min Condition & Notes: Used Optical condition according to the pictures Scope of supply: 1 × Weiss Technik WK-180/70/5 climate testing chamber External control panel Existing shelves Existing connection components Otherwise, scope of supply as shown in the pictures. Collection or shipping by forwarding agent possible by arrangement. Loa

Year of construction: 2007, condition: used, The MOTOMAN welding line is in good condition and has only worked about 100 working hours. Such a set is mostly used in the production of agricultural machinery – trailers, frames, axles. Made to order or assembled from standard products (except portal). The automatic welding station consists of: Station – HD Gantry HP6/EA1400N Positioner – HSB -10000SX Control unit – NX 100 Welding: Arc welding. MIG/MAG welding. Possibility of pulse cooking. The thickness of the wire used is 1 – 1.2 mm. The minimum seam height is 3mm. Maximum wire feed speed 25 m/min. Welding handle cooling function. Laser tracking: Seam search using laser sensors. It is used when changing the position of the seam. Possible deviation from the position of 5 mm. Increase in welding time by 30% and more (depending on the product). Seam fixation at min. 3mm for drop. Hodpfjm Uc Igex Airow Positioning: Positioner – HSB-10000SX The carrying capacity of the positioner is 10,000 kg The positioning accuracy of the robot arm is 0.0001 mm Dimensions of welded parts: Height/width – up to 3000 mm (including mounting hardware). Length – up to 6500 mm (including mounting equipment). Maximum weight – up to 3500 kg (limited by lifting equipment). Specifics of the parts that can be welded: Batches of high precision coupling parts. Long weld length. Large metal thicknesses min. 5 mm. Rigid product construction. When a consistent high-quality weld is required. High bending tolerance of parts. High tolerance of overall dimensions of parts. Welding inside the part – depth 110 mm. If you have more questions, we will be happy to answer them.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller model: HypCut, laser type: fiber laser, laser source manufacturer: MaxPhotonic, laser power: 20,000 W, laser wavelength: 1,080 nm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 15 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input current: 110 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 20 bar, overall weight: 9,500 kg, door opening width: 1,000 mm, door opening height: 2,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, New laser cutting machine with 20 kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A comprehensive cutting parameter library is included in the scope of delivery, as well as first-class service. - 20kW laser power for maximum performance - Machine incl. automatic exchange table - Machine bed lined with graphite plates - Machine measured and adjusted with Renishaw system (including measurement report) - Space-saving - Extremely energy-efficient cutting system - Requires only approx. 9.5 x 3.5 meters of installation space - 20 kW laser source from MaxPhotonics (G5/CE version) The following options are also available: - Automatic nozzle changer (Optional) - Automatic nozzle centering (Optional) Hedpfx Aioyhhnksrew - Sheet metal detection and part nesting via CypVision camera system (Optional) - Import of 3D files (.stp) and unfolding (Optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (Optional) - Nesting, calculation, and ERP integration (Optional) - Top quality, schedule a visit now! Cutting of steel sheet up to a maximum of 50mm Cutting of stainless steel sheet up to a maximum of 40mm Cutting of aluminum sheet up to a maximum of 40mm - Travel range 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - On three sides, large laser protection windows for observing the cutting process - Automatic, programmable 3-gas switching (Compressed air, nitrogen, oxygen) - Comprehensive cutting parameter file - Incl. nesting module - Very easy to operate - Powerful laser chiller - Machine control in German - Extensive service and warranty services - Powerful laser chiller - Filter extraction optional Sales are exclusively to commercial businesses. Delivery / Consultation / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 8.5m Height: 2.3m Width: 3.5m Total weight: approx. 9500kg Do you need a different laser power, a different table shape, or a different table size? No problem. I will gladly create a suitable offer. e.g. 2 kW machine from 29,990 euros or 6kW machine from 79,900 euros Are you unsure which laser power is suitable for your application? Just give us a call. Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Hjdjzn N Ikepfx Airow

Condition: used, Weiss Type: WT3-480/60 Weiss Temperature Test Chamber WT3-480/60 EX / ATEX – explosion-proof test chamber Water-cooled version With digital control and touch panel Temperature range: -60 °C to +160 °C Hsdpe Ad Iy Iofx Airew For sale is a used temperature test chamber from the manufacturer Weiss Umwelttechnik GmbH. The system has an explosion-proof test chamber and is suitable for industrial temperature tests within the permissible operating conditions. ATEX explosion protection: Marking according to the nameplate: II 2/- G IIB T3 Gb/- Test chamber explosion-proof CE 0044 The permissible operating conditions are determined by the manufacturer's documentation. Control panel "Touch Panel" Control and operating functions as well as temperature programs can be called up and set via the touch panel. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: WT3-480/60 Device type: Temperature test chamber Version: EX / ATEX – Test chamber explosion-proof Cooling: water-cooled Humidity control: not available Test chamber volume: approx. 480 liters External dimensions without door fittings: Height: approx. 2050 mm Width: approx. 1000 mm Depth: approx. 2480 mm External dimensions with hinges and door handle: Height: approx. 2050 mm Width: approx. 1100 mm Depth: approx. 2480 mm Overall depth including touch panel: approx. 2600 mm Internal dimensions: Height: approx. 920 mm Width: approx. 800 mm Depth: approx. 650 mm Note on dimensions: The specified dimensions are reference values for the explosion-proof WEISS 480-liter series. Deviations are possible in this special version. Data for temperature tests: Temperature range: -60 °C to +160 °C Temperature change rate: Heating: approx. 4.04 K/min Cooling: approx. 1.42 K/min Measured values according to the workshop report. Data for operation: Rated voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 17.0 kW Rated current: 30.0 A Refrigerant: R404A – 3.5 kg R23 – 1.2 kg Refrigeration system: Max. low pressure: 18 bar g Max. high pressure: 25 bar g Standing pressure: 8.5 bar g Equipment: Digital control with touch panel Test chamber lighting Network interface according to workshop report Water-cooled refrigeration system Explosion-proof test chamber Weight: approx. 930 kg Reference value of the explosion-proof WEISS 480-liter series For your safety as a buyer, the following information! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. A workshop report is available for this device. Temperature functions and other test points have been documented. According to the workshop report, the cooling function has been repaired. The buffer battery has been replaced. Work has been carried out on the display cabling. Details according to the workshop report. Condition: used Scope of delivery: (See picture) Shipping by forwarding agent possible upon request. (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2006, machine/vehicle number: PST18, Tecnoindustria Used Pasteurizer Completely OverhauledTecnoindustria-brand mesh-belt pasteurizer, constructed entirely of stainless steel with a square-mesh stainless steel belt. Includes water recirculation tanks with associated pumps, an infeed and outfeed conveyor for jars or crates, a blower system for drying jars or crates, a steam modulation unit, a heat exchanger, all necessary connecting piping, and all other accessories required for operation.The machine has been completely overhauled.It is made up of two sectors of which: first sector useful length 11450 mm Hodpfx Aiovguhkjrsw second sector useful length 7350 mm overall dimensions: Total length 18.70 meters without ribbons Useful belt length axis by axis: 18.45 m Useful net width 2.00 m. Overall width of the machine body 2.36 m Overall width including trays 2.36 m + 0.65 m total 3.01 m Total useful area of the machine sq.m. 36.90 Height 1400Features by sectionSterilization length: mm. 7,700 useful Pre-cooling length: mm. 3,300 useful Length of warm water cooling + cooling: mm. 7,000 useful Height mm 1400 Single track entry belt width: mm 200 Length: mm 3200 Single lane outfeed belt with Intralox belt width: mm 400 length: mm 3700 usefulTecnoindustria Used Pasteurizer Completely Overhauled, The machine is totally overhauled, in excellent condition.It is necessary to build the electrical panel, this is missing in this equipment. Its construction is therefore carried out and created with the customer’s specifications, adapting the pasteurization areas to the production needs. Its speed on the 65 diameter is approximately 18,000 pieces per hour, speaking of cylindrical containers. This used tunnel pasteurizer is ideal for both tomato preserve jars and for tinplate and aluminum cans. Both fruit juices and soft drinks and even tomato puree can be pasteurized.The used tunnel pasteurizer has already been overhauled and is ready to be purchased and delivered to the end customer, we will follow all the issues related to its loading on trucks or containers included in the price.

Condition: new, functionality: fully functional, power: 44.87 kW (61.01 HP), gearing type: automatic, fuel type: diesel, fuel tank capacity: 55 l, color: red, overall weight: 4,220 kg, lifting power: 1,800 kg/m, lifting height: 2,784 mm, tire condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, digging bucket width: 1,900 mm, Year of construction: 2025, load capacity: 1,800 kg, machine/vehicle number: H&R 3518, Equipment: additional headlights, all wheel drive, cabin, hydraulics, pallet forks, soot filter, standard shovel, trailer coupling, H&R Loader 3518 – The versatile farm loader for demanding tasks Advantages of the H&R 3518 Wheel Loader Powerful engine: Yunnei common-rail diesel engine with Bosch injectors and Bosch control system, 45 kW / 61 hp. Exhaust turbocharger with charge air cooling for improved responsiveness in the lower speed range. Euro-5 emissions standard with particulate filter, without AdBlue. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its size and a high dead weight and lifting capacity, the H&R wheel loader is relatively maneuverable. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between different attachments. Expandable functions: Use the 3rd and 4th hydraulic circuits to operate additional attachments such as mowers, bale grabbers, snowplows, and more. Comfortable cab for all-day use: The H&R wheel loader offers a spacious cab with an adjustable seat, diesel-powered auxiliary heater, and reversing camera, as well as heating and ventilation, and a radio with MP3 and USB. This allows you to carry out even longer tasks comfortably and safely. H&R loaders are technically and visually optimized and thoroughly tested in-house. In addition, each machine receives extensive rust protection treatment. Our wheel loaders comply with CE standards according to the EU Machinery Directive. For our machine, there is a TÜV Süd expert opinion for obtaining individual operating permission in accordance with §21 StVZO (road approval / operating permit as a self-propelled working machine). Important features of the H&R 3518 farm loader • Fully equipped • Extensively optimized in Germany • Powerful and robust - versatile • Compact design ensures high maneuverability despite its size • Comfortable cab with heating and ventilation as well as a diesel-powered auxiliary heater • Joystick with electric gear shifting for precise control • Additional 3rd and 4th control circuits for attachments • Reversing camera with display • LED work lights and windshield wipers for clear visibility in all weather conditions • MP3 radio and USB connection for entertainment while working • Ball-type trailer coupling with socket for use with trailers • Coolant preheating 220V for reliable cold-starting capability and increased engine life. • Hour meter to monitor operating times and maintenance intervals • Extensive rust protection treatment • CE compliant according to EU Machinery Directive • Incl. 1 year spare parts warranty Hsdeul Ab Sepfx Airjw Price Net: €24,590.00 VAT: €4,672.10 Gross: €29,262.10 Financing possible! Optional Road approval / operating permit: €480 Extended warranty (2 years): €590 Transport Germany and Austria: On request Technical details Engine: 4-cylinder Yunnei Engine power: 45 kW / 61 hp Emission class: Euro 5 Lifting height: 2784 mm (bottom edge of standard pallet fork) Discharge height: 2279 mm (standard bucket tilted) Lifting capacity: 1800 kg Wheelbase: 2280 mm Tires: 20.5-70 R17.5 Dimensions: 4050 x 1870 x 2570 mm Weight: 3850 kg Accessories and spare parts are available from us. Please provide your telephone number when making inquiries.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 49149, operating hours of spindle: 39,072 h, number of slots in tool magazine: 280, Equipment: chip conveyor, For sale is an extremely robust and reliable horizontal 4-axis machining center, Heller MCH 250, manufactured in 2008. The machine is designed for high-precision heavy-duty machining and is in operational condition. Equipment: Hsdpfxe Afxw Ho Airew - Horizontal spindle - 2-position pallet changer - Rotary table - Additional 4-position rotating pallet changer (Keppeler, SN: M4.4914900) - Siemens 840D control - 280-position tool changer - Chip conveyor Knoll 330S-1/150 - Coolant/lubricant treatment system with band filter, Siemens Simatic control - Cooling unit BKW Accessories: - Workbench (4 drawers, 1 door) - Swivel chair - Shelf - PC, mouse, keyboard, monitors Attractive offer – flexible and worry-free We offer not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payments, or individual financing models – together, we will find the right solution. If desired, we will also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so that you don't have to worry about anything. 📞 Please contact us for more information or a non-binding offer. We will provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Hodjz S Nbwopfx Airew Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 3,096 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 2,150 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,850 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,100 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: superelastic tires (black), rear tire size: 23 X 10 - 12, overall weight: 7,900 kg, empty load weight: 4,900 kg, total height: 2,350 mm, total length: 2,300 mm, total width: 2,000 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS ✅ 📌 Years of experience | 🛠️ In-house service & paint shop | 👨‍💼 Professional consulting | 🚛 Own transport fleet | 🤝 After-sales support 🔎 Searching for a forklift you can rely on? We are a reputable dealer of new and used forklifts with a long-standing tradition. 🌍 We serve customers throughout Europe – from small enterprises to international manufacturing plants. Our forklifts are more than just equipment – they are your assurance of smooth and reliable logistics operations. ⭐ What sets us apart? ✅ Each forklift undergoes a complete technical servicing (inspection, testing, filter & oil replacement, reconditioning of key components) 📄 Full UDT certification available on request 🎨 Own paint and service workshop – machines fully improved visually and technically 🚚 Transport across Europe – carried out by our own fleet with professionally trained drivers 👷 Operator training upon delivery + functional test at your facility 🤝 After-sales support and technical assistance – we support you even after the sale 👀 Possibility to view and test the machines at our headquarters – you are welcome! 🌟 Hundreds of satisfied customers across Europe – join those who already trust us 💶 Financing support – cooperation with major leasing companies 📑 Invoice in EUR or PLN – according to client preference 📦 OFFERED: 🏗️ COMBILIFT C3000 – Four-Way / Multi-Directional Forklift ✅ Year of manufacture: 2012 ✅ Operating hours: 3,096 hours ✅ Drive: LPG ✅ Capacity: 3,000 kg ✅ Mast: Duplex – 4,500 mm Hodpfo Af I A Nox Airow ✅ Fork positioner 1,100 mm | Forks 1,200 mm ✅ Superelastic tyres – 100% condition ✅ Free lift: 2,150 mm ✅ Technical condition: Excellent – after major service ✅ Visual condition: Well-maintained, rust-free, ready for operation 📐 Dimensions: Height: 2,350 mm Overall length: 2,300 mm Width: 2,000 mm Positioner width: 1,100 mm Overall height: 2,850 mm 🎯 Ideally suited for: 🏢 Narrow-aisle warehouses 🪵 Wood, steel & pipe industries 📦 Handling long loads 🏭 Both indoor and outdoor applications 💼 FT Logistics – Quality you can rely on. Service you can trust.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,000 kg, door opening width: 3,000 mm, door opening height: 600 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 6kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of supply, as is first-class service. Hedpjxw T Nkofx Airsw - Machine without automatic exchange table! The loading takes place on the long side of the machine. - Very space-saving - Extremely energy-efficient cutting system - Requires only approximately 4 x 4.5 meters of installation space - 6kW laser source from MaxPhotonics (G5 / CE version) - Laser generator with socket efficiency greater than 30% - Suitable for aluminum - Top quality, schedule a viewing now! Cutting of steel sheet up to 30mm (maximum) Cutting of stainless steel sheet up to 15mm (maximum) Cutting of aluminum sheet up to 12mm (maximum) Cutting of brass sheet up to 8mm (maximum) - Travel range 1500 x 3000mm (for large formats) - Machine control in German - Safety light curtain for maximum operator protection - Comprehensive collision protection measures for the cutting head - Large laser protection windows for observing the cutting process - Extensive cutting parameter file - Incl. nozzle module - Very easy to operate. - Powerful laser chiller - Machine control in German - German service and spare parts supply - Powerful laser chiller - Filter extraction is optionally available (5.5kW with frequency inverter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (Optional) - Automatic nozzle centering (Optional) - Raw material recognition and part nesting via camera system CypVision (Optional) - Import of 3D files (.stp) and unfolding (Optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (Optional) - Nesting, calculation, remnant plate management, etc. (Optional) - ERP system can be combined with all your other sheet metal processing machines (Optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.5m Total weight: approx. 4500kg Do you need a different laser power, a different table shape, or a different table size? No problem. I will gladly create a suitable offer. For example, a 2kW machine from 29,990 euros. Are you unsure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. A lot is possible here.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: Max Photonics, laser power: 3,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, table width: 1,300 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 3,500 kg, door opening width: 2,600 mm, door opening height: 1,000 mm, Equipment: CE marking, cabin, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, New laser cutting machine with 3kW fiber laser Our goal is to offer highly precise, long-term stable, and yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library is included in the scope of delivery, as is first-class service. Please also note our attractive leasing/hire purchase offers. - Machine without automatic exchange table - very space-saving - extremely energy-efficient cutting system - requires only approx. 4 x 4.0 meters of installation space - 3kW laser source from MaxPhotonics (G5) suitable for aluminum - Top quality, arrange a viewing now! Cutting of steel sheet up to 22mm Cutting of stainless steel sheet up to 10mm Cutting of aluminum sheet up to 10mm Cutting of brass sheet up to 6mm - Travel range 1260 x 2550mm (for medium format) - Machine control in German - Safety light curtain for maximum operator protection - Extensive collision protection measures for the cutting head - Large laser protection window for observing the cutting process - 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - incl. nesting module - very easy to operate - powerful laser cooler - Machine control in German Hedpfxexa Ahnj Airjw - German service and spare parts supply - powerful laser cooler - Filter extraction system available as an option (5.5kW with frequency converter for pleasantly quiet operation) The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via CypVision camera system (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap plate management, etc. (optional) - ERP system can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Length: 4.0m Height: 2.3m Width: 4.0m Total weight: approx. 3500kg Do you need a different laser power, table shape or table size? No problem. I will gladly create a suitable offer. e.g. 2kW machine from 29,990 euros Are you not sure which laser power is suitable for your application? Of course, I will carry out cutting tests according to your requirements. There are many possibilities here.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 9,414 h, Equipment: air conditioning, hydraulics, lighting, power assisted steering, trailer coupling, For sale is a Claas Arion 410 from 2011. The tractor is in good condition, ready for immediate use, and has been regularly maintained. The last maintenance and the occupational safety inspection were carried out in April 2026. Technical data Manufacturer: Claas Type: Arion 410 Year of manufacture: 2011 Operating hours: 9,414 h Hodpfxj Afwdxe Airjw Equipment Air conditioning and heating Cooling compartment Compressed air system 2 rotating beacon lights Radio Panoramic window in the roof area HUSS diesel particulate filter MK 200 including control unit in the cab Rockinger trailer hitch, unlockable from the cab Transport box on the front weight, 600 kg Retrofitted 270° camera system with three cameras Monitor in the cab for optimal all-round view and increased safety The tractor was mainly used for internal transport tasks. As a result, it was not regularly used for heavy field or soil cultivation work. Maintenance was carried out regularly. The vehicle is in good condition, commensurate with its age and operating hours, and is ready for immediate use. The two front wheel covers have some damage, but this does not affect the functionality of the vehicle. Inspection possible by arrangement. Further information and pictures are available upon request.

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Vacuum Press – Ready for Immediate Use | Excellent Condition | Versatile Applications For sale: High-quality vacuum press in excellent condition – ideal for joineries and woodworking companies seeking to work more efficiently and flexibly. This press enables you to: - Perform precise veneering - Carry out form bonding - Shape mineral-based materials and plastics - Achieve efficient production even for single pieces and custom solutions What this means for you: Hodpfx Ais Afxxvjrow Expand your service portfolio and take on jobs that were previously not feasible or profitable. Technical Specifications: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Frame internal dimensions: 3130 x 1430 mm Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Special features: - Easy operation - Low maintenance requirement - Versatile applications - Lifetime warranty (excluding wear parts) - Includes digital user manual and AI support! Inspection and test run possible at any time.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 43,686 h, total height: 2,300 mm, overall weight: 7,000 kg, table width: 500 mm, table length: 870 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D Powerline, number of axes: 3, This 3-axis DMG Sauer Lasertec80 FineCutting was manufactured in 2006. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 700 mm. The machine is equipped with a Siemens SINUMERIK 840D Powerline control and a high-precision cross table with linear drives. If you are looking to get high-quality laser fine cutting capabilities, consider the DMG Sauer Lasertec80 FineCutting machine we have for sale. Contact us for further details. Technical Data • Machine Type: Laser Fine Cutting, Laser Drilling and Laser Welding Machine • Control: Siemens SINUMERIK 840D Powerline • Table Type: Cross Table with Linear Drives • Maximum Sheet Size: 870 × 500 mm • Vertical Axis with Linear Guideways and Ball Screw Drive • Machine Base: Mineral Cast Construction • Laser Type: Lasag KLS246 Nd:YAG Laser • Average Laser Power: 100 W • Focal Length: 70 mm • Machine Dimensions (L × W × H): 6,000 × 5,000 × 2,300 mm • Machine Length: 6,000 mm (including aggregates, operation and maintenance space) • Machine Width: 5,000 mm (including aggregates, operation and maintenance space) • Operating Hours: 43,686 h • Laser Unit Condition: C Module Defect Additional Equipment • Precitec Processing Head • Automatic Height Control • Keller Dust Extraction System • Automatic Filter Cleaning System • KKT Kraus Water-Air Cooling Unit • Programmable Process Gas Pressure • Completely Overhauled Laser Cavity • New Pulse Lamp • Precitec Laser Head Mounting Tools Machine Benefits • Suitable for Laser Fine Cutting, Laser Drilling and Laser Welding • High-Precision Cross Table with Linear Drives • Automatic Height Control for Precise Processing • Comprehensive Maintenance Logbook Available • All Repairs and Component Replacements Documented • Inspection on Site Possible • Repair of the Laser Unit PossibleRepair will only be carried out if requested. Please note that the selling price may vary accordingly. Hodpozl T R Dofx Airsw

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,496 h, load capacity: 4,000 kg, lifting height: 4,050 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,800 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 / 50 - 10, rear tire size: 27 X 10 - 12, overall weight: 10,200 kg, empty load weight: 6,200 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, # COMBILIFT C4000 | DUPLEX 4050 MM | WIDE FORK POSITIONER 3100 MM | FULL CABIN | READY TO WORK 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 DELIVERY ACROSS EUROPE AND WORLDWIDE If you are looking for a forklift that will start generating value from day one instead of creating additional service costs, this machine is the right choice for you. We are offering a proven and fully prepared COMBILIFT C4000 multidirectional forklift. The machine has undergone a complete technical inspection, comprehensive servicing, and detailed testing. It is ready for immediate operation in a production facility, warehouse, or logistics centre. ### ⭐ KEY BENEFITS 🔧 Complete service carried out before sale 🛡️ Start-up warranty 🛞 Brand new superelastic tires ✨ Very good technical and visual condition ✅ Ready to work without additional investment 🎥 Live online video presentation available 🚛 Direct delivery to the customer available ### 📋 TECHNICAL SPECIFICATION 🏭 Manufacturer: COMBILIFT 🚜 Model: C4000 📅 Year of manufacture: 12/2015 🏋️ Load capacity: 4000 kg ⛽ Power: LPG ⏱️ Operating hours: 4496 h ⬆️ Mast: DUPLEX 📏 Lifting height: 4050 mm ↔️ Wide hydraulic fork positioner: 3100 mm 🍴 Fork length: 1300 mm 🚪 Cabin: Full and heated ⚖️ Machine weight: 6200 kg ### 📐 DIMENSIONS 📏 Overall height: 2450 mm 📏 Length: 2300 mm 📏 Width: 2250 mm 📏 Mast closed height: 2800 mm ### 🛞 TIRES 🔹 Front: 200/50-10 superelastic 🔹 Rear: 27 x 10-12 superelastic ✅ Tire condition: 100 percent brand new ### ⚙️ EQUIPMENT ↔️ Wide hydraulic fork positioner Hjdpfx Ae Ag Nbhjirew 🔥 Full heated cabin 💡 Work lights 🚨 Warning beacon ### 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel stockholders 🔩 Steel construction manufacturers 📦 Handling pipes, profiles and long materials 🏢 Indoor and outdoor operation ### ⭐ WHY FT LOGISTICS When purchasing from FT LOGISTICS, you are buying from a company specializing in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. 🔧 Every machine undergoes a comprehensive technical inspection, complete service, and detailed testing before being released to the customer. 🚜 We have more than 100 machines available from stock and supply equipment to customers throughout Europe, South America, Africa, Asia, and the Middle East. ### 🤝 WE PROVIDE 🔧 Complete service before sale 🛡️ Warranty 👨‍🔧 Professional technical advice 💶 Leasing and financing 🚛 Transport organization 🌍 Export services and customs documentation 🤝 After-sales support Hundreds of customers across Europe have trusted our machines and continue to return to us for further purchases. 🎥 We can arrange a live online presentation of the machine, provide additional photos and videos, and prepare an individual transport quotation directly to your company. ### FT LOGISTICS 🚜 WE DELIVER MACHINES READY TO WORK.